This flows out of #5084 and trying to reduce UnsafeMake use. It turns
out imports and namespaces were using unexpected node kinds (previously
ImportIntroducer instead of ImportDecl, for example). This fixes and
adds validation.
I was uncertain about whether to just remove the is_convertible check,
since I don't see it as motivating creation of a conversion between
NodeIdOneOf types. So I've just left a TODO for now.
According to approved syntax at
https://github.com/carbon-language/carbon-lang/blob/trunk/proposals/p3848.md#syntax-defined,
`fn F[]` without explicit parameters should be valid. This makes it
work, then adds some validation to prevent `class C[]` in check.
Note that for `fn`, positional parameters are a TODO -- but this allows
me to test validation in `fn destroy[]` which is rejected, not just a
TODO.
This changes the SemIR of invalid redeclarations, because previously
they lacked a name. We've avoided this in diagnostics so it doesn't
otherwise come up, but I plan to use it for more easily validating
redeclarations.
A query facet type may contain multiple required interfaces, in which
case impl lookup should return an ImplWitness for an impl that is used
for each interface in the query. We bundle these together into an
instruction block and return that from impl lookup. The witnesses are in
the same order as the interfaces in the
`CompleteFacetType::required_interfaces`. This allows walking the
`required_interfaces` to find an interface to give an index that can
also be used to grab a witness from this set, or from FacetValue.
FacetValue now has an InstBlockId for the set of witnesses of the
FacetType, instead of a single ImplWitness instruction id.
FacetAccessWitness includes the index of the witness (determined from
the position in `required_interfaces`) of the witness it's accessing
from the FacetType.
The
toolchain/check/testdata/facet/no_prelude/fail_todo_call_combined_impl_witness.carbon
test demonstrates the fix in the resulting SemIR. We can see the calls
to methods on a multi-interface FacetType result in a FacetAccessWitness
with an index of the correct interface, and this results in a witness
that leads to the correct impl's function.
There is a TODO in member access, where it does not have a
`CompleteFacetType` yet, so it uses the index in
`FacetTypeInfo::impls_constraints` instead, but this can be incorrect in
the presence of named constraints, which when completed can add more
interfaces to the `CompleteFacetType` and which are sorted into an
arbitrary order with the rest there.
---------
Co-authored-by: josh11b <15258583+josh11b@users.noreply.github.com>
During SemIR, when identifying a specific in a specific context, we'd
have to either look through a specific or through a bound method.
Canonicalize which one to look through first, by having the BoundMethod
created around a SpecificFunction instead.
This changes a lot of check tests.
TODO: As the SemIr does not currently allow removal (access to insts()
is intentionally const), the bound instruction created prior to finding
the specific is not removed from the instructions.
Options: (1) leave as is, (2) add a way to remove the previous bound,
(3) rethink how/when the BoundMethod inst is created.
- Explicitly document that `*Param` and `*ParamPattern` insts represent
`Call` parameters.
- Stop wrapping compile-time parameter patterns in `ValueParamPattern`
insts (because they aren't `Call` parameters).
- Document how `MatchContext::results_` relates to the `Call`
parameters, and be more consistent about when it's written to.
- Remove `RuntimeParamIndex::Unknown`: we no longer need to distinguish
"this `Param`'s runtime index is unknown" from "this `Param` isn't a
runtime param", because we no longer use `Param`s at all in the latter
case.
- Rename `RuntimeParamIndex` to `CallParamIndex`.
As a side effect of removing the `ValueParamPattern` insts, this fixes a
minor diagnostic bug where `NoteInitializingParam` didn't identify the
specific parameter that led to a deduction failure, because it expects
generic parameters to only be represented by `SymbolicBindingPattern`s,
but before this change they could be wrapped in `ValueParamPattern`s.
Replace the large and growing `TryEvalInstInContext` function with one
function per kind. While we still have special-case handling for a small
number of instruction kinds, most instructions are now handled either
fully automatically or use a common codepath that evaluates the
instruction operands and then performs an eval-context-independent
evaluation of the instruction.
To support this, `InstConstantKind` is expanded to describe more
fine-grained details about how each kind of instruction interacts with
constant evaluation. Also, the operand kinds of instructions become
slightly more fine-grained: we now distinguish between operands that
describe the destination of an initializing expression (`DestInstId`)
from other `InstId` operands, because `DestInstId` operands need
different treatment during constant evaluation. In particular, an
initializing expression can have a constant value even if its
destination is non-constant or has not yet been set, because evaluation
of an initializing expression doesn't include the store to the
destination.
Some minor test changes:
- We now more consistently propagate errors into the results of constant
evaluation, so more instructions that depend on errors have a constant
value of `<error>`.
- Diagnostic location for invalid array types now point at the whole
array type rather than the array index expression, because
`EvalConstantinst` doesn't have access to the original expression.
- Diagnostic for failed `RequireCompleteType` doesn't print the original
type any more because `EvalConstantInst` doesn't have access to the
original expression.
As a follow-up, some of this -- in particular, the `EvalConstantInst`
overloads -- will be moved to a separate file, in an effort to split the
overall constant evaluation machinery apart from the logic to evaluate
each individual kind of instruction.
Emit diagnostics for a function declared in a non-owning library, that
is not redeclared (or defined) in the owning library.
---------
Co-authored-by: jonmeow <jperkins@google.com>
In order to have the name available for diagnostics, we now always set
`NameId` in `NameContext` and put `poisoning_loc_id` as part of the
union with `resolved_inst_id` instead (since we never need both).
For an expression such as `(Type as Interface).AssocFn()`, track the
`Self` type `Type` in the result of the member access so that it's
available when checking the function call.
This introduces a new kind of type, `ImplFunctionType`, that represents
the type of a function that is expected within an impl, modeled as the
type of the function within the interface plus a value to use as `Self`.
Calls to values of this type behave like calls to the underlying
function except that the `Self` parameter is pre-bound to the self type
from the facet.
In order to support this, fix an issue where the imported list of
generic bindings lost their association with their enclosing generic.
This adds a little complexity to `import_ref`, including a new recursive
cycle that I intend to address in a follow-up PR.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
High level, replacing `Id::Invalid` with `Id::None` and `Id::is_valid`
with `Id::has_value` for clarity, as discussed
[here](https://discord.com/channels/655572317891461132/655578254970716160/1331664574545395794).
The `IntId` refactoring is needed together with `AnyIdBase` because it's
also used with `ValueStore`.
Note, trying to be careful not to rewrite `EnumBase::InvalidIndex`, or
`is_valid` in general (e.g., `IdKind::is_valid`).
I've tried to sequence commits here:
1. Automatic replacements:
- `((?:Id|Index)(?: |::|\(|Base(?:\(|::)))Invalid((?:Index)?\W)` ->
`$1None$2`
- `<invalid>` -> `<none>`
- `InvalidNodeId` -> `NoneNodeId`
- `/\*invalid\*/` -> `/*none*/`
- `id((?:_|\(\))(?:\.|->))is_valid` -> `id$1has_value`
2. Manual edits:
- In `int.h` and `int_test.cpp`
- `IntT` has `is_value`, which I'm renaming to `is_embedded_value`.
- Manual edits to comments in this file.
- `AnyIdBase` and `IdBase`
- Declaration of `is_valid` -> `has_value`, `InvalidIndex` ->
`NoneIndex`.
- In `ids.h` and `ids.cpp`
- `is_valid` -> `has_value`
- `// An explicitly invalid ID.` -> `// An ID with no value.`; similar
for index
- Various math on `InvalidIndex` -> `NoneIndex`
- Various mentions of "valid" in comments
- In `value_store.h`, for `IdT::Invalid`, plus one comment
- In `impl.h` and `tokenized_buffer.h`, we had different initialization
of `::None` values (versus `ids.h` syntax) that I fixed manually.
- Spot checks to compile
- Particularly where `is_valid` replacements didn't catch spots due to
different naming.
3. Autoupdate tests
4. verbose.carbon (NOAUTOUPDATE)
5. Comment spot checks
Note there are probably other mentions of "Invalid" that should be swept
up, but I'd like to argue for merging and separating out remaining
cleanup since this is so sweeping (and likely to hit merge conflicts
from churn). We'll probably have lingering mentions of "invalid" for a
bit regardless, just because there are uses of "invalid" in non-Id APIs.
Changes the name of SemIR `import_ref`s to use the format
`<package>.<entity>`.
<table>
<tr><th>Before</th><th>After</th></tr>
<tr>
<td><code>%import_ref.05a: type</code></td>
<td><code>%Main.D: type</code></td>
</tr>
<tr>
<td><code>%import_ref.8f2: <witness></code></td>
<td><code>%Main.import_ref.8f2: <witness></code></td>
</tr>
</table>
* [Discord discussion in
#toolchain](https://discord.com/channels/655572317891461132/655578254970716160/1330253540999827577)
* Closes#4769
This removes some churn when adding new diagnostic cases to test files
(where previous to this change the newly added newline would cause the
previous diagnostic CHECKs to be updated including changes to the line
number because the CHECK for the blank line meant an extra line between
CHECK and source line).
A few alternatives discussed here:
https://discord.com/channels/655572317891461132/655578254970716160/1329573358475673723
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Add a Vtable typed inst with a type_id (of the type this vtable applies
to) and list of virtual function decls (or import refs to function
object constants).
This doesn't add lowering/emission of the vtable, or usage when
initializing objects of the type.
Some questions in case they're interesting to discuss:
* is it right/worth having the type_id in the vtable? (probably makes it
easier to emit - using the type to get the class name to figure out the
mangled name for the vtable) perhaps it should be a ClassId?
* I'm thinking the logic in CheckCompleteClassType could be the place we
handle diagnostics for mismatched keywords (virtual/abstract for a
function that's already virtual/abstract, maybe checking for non-virtual
functions with the same name in a base class, or derived class functions
without `impl`, etc) - but we could move some of that to the moment we
walk the function decl, and record our findings in the function decl
(record the base function it overrides, or the index of the vtable to
slot to use when building the vtable at the end of the class)
* the Vtable typed inst has `constant_kind = InstConstantKind::Always`
and `is_lowered = false`, I think I added that in to workaround/address
some failures in lowering. And seems correct for this intermediate step
- I'll add lowering in a follow-up patch. But the constant_kind - what
should this be? We can just say all vtables are of VtableType (in which
case the `Always` constant kind sounds right to me) or we could have
them introduce a type with each virtual function as a named member,
even?
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
When printing a Class, the complete_type_witness was printed last but
this gave a somewhat misleading representation as it appeared to be part
of the !members label. Move it above the label so that the label more
clearly refers to everything below it.
Rename `CheckIsAllowedRedecl` to `DiagnoseIfInvalidRedecl` to try to
better document behavior, and clean up comments.
This extends the no-merge-if-defined behavior to functions. It was
already the case for class/interface, and just added for impl, so if
anything functions were now inconsistent. I was kind of tempted to make
a helper for it, but I didn't think of a great structure/name to get
there: `DiagnoseRedef` isn't always called when it's a redefinition, for
example due to `extern` diagnostics, it's hard to combine.
Cleans up `is_defined` calls to rely more on `has_definition_started`,
removing some code paths that are unused since definitions aren't
merged.
Include the index rather than the name in the fingerprint of a symbolic
binding. While both the index and the name contribute to the canonical
identity, using either one of them in the fingerprint is sufficient to
ensure that distinct entities get different fingerprints. Changing the
name of a symbolic binding should ideally not result in fingerprint
changes, so exclude the name from the fingerprint when we have an index.
Use the canonical type and constraint when fingerprinting an impl, so
that uses of names in `name_ref` instructions aren't considered, only
the entity the name resolves to, and different ways of spelling the same
type have the same fingerprint. This similarly allows compatible changes
to be made to impls without changing the fingerprint.
Exclude the declaration block when determining the fingerprint of a
declaration. The declaration block contains the declarations of
parameters of the declaration, which do affect whether two declarations
are identical, but not whether they denote the same entity, because it
would be invalid to have different declaration blocks for declarations
with the same name in the same scope. Therefore changes to the
declaration block are compatible, and it's useful for such changes to
not affect the fingerprint.
This is not easy to test in isolation with our current testing
machinery. However, a follow-on PR will change the name of a parameter
in the prelude, and with this in place, will not cause any changes to
occur elsewhere in the toolchain tests.
These don't fully work in check and beyond yet, because they're not
added into lexical lookup, but already mostly do the right thing.
Per #3407, disallow namespace declarations anywhere other than at file
scope for now.
We don't treat statements starting with a packaging introducer keyword
(`package`, `library`, `import`) as declarations because they're
sufficiently unlikely to occur that the error recovery doesn't seem
important, and this avoids needing to disambiguate `package.` at the
start of an expression.
Use it in the instruction namer to make instruction names more stable
across unrelated changes to the toolchain or the prelude.
---------
Co-authored-by: Dana Jansens <danakj@orodu.net>
* Change `InterfaceWitness` -> `ImplWitness`
* Include a `SpecificId` in the `ImplWitness`. This allows the
`InstBlock` it contains to have its own identity, allowing it to be
changed as the impl is processed. Evaluation only updates the specific.
* Create the `ImplWitness` at the start of the impl definition. In the
future, this will be populated with the values of non-function
associated constants. For now, it starts full of invalid instruction
ids.
* Implements the model suggested in #4672 .
Note that the non-SemIR testdata changes are to these file:
* `toolchain/check/testdata/impl/lookup/fail_todo_undefined_impl.carbon`
* `toolchain/check/testdata/struct/import.carbon`
* `toolchain/check/testdata/tuple/import.carbon`
The last two are due to an import of generics bug exposed by this PR,
which will be fixed in a follow-on.
---------
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Use a deque to maintain the set of instructions to be walked over. so
that the loop can append more instructions (with their related scope)
during iteration without requiring recursion.
---------
Co-authored-by: jonmeow <jperkins@google.com>
Instead of providing operations only for `i32`, provide them for all
`iN` and `uN` types.
For now, this excludes the `*Assign`, `Inc` and `Dec` interfaces,
because the implementations for those are defined as Carbon functions
rather than builtins, and we can't yet lower definitions for specific
functions, so converting those to be generic breaks the build for our
examples.
This is a precondition for enabling the new pattern-matching subsystem
to support binding patterns that have `if` expressions in the type
position.
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Instead of treating `Core.Int` as the toolchain's builtin `IntType`,
model it as a class that adapts the builtin type. This aligns us better
with the intended language model, gives an associated library for
`impl`s involving `Core.Int` to live within, and opens the door adding
member functions to `Core.Int` if we decide that is desirable.
Remarkably it also seems to make the formatted SemIR a little smaller,
because a call to a generic class generates less IR than a call to a
function.
The offsets were originally added to deal with churn from builtins in
the raw semir. In textual semir, we mostly see instruction IDs for
imports, and builtins have also settled down more.
On imports, where possible, use the `EntityNameId` for an import instead
of printing an instruction. Next, show the source location if we have a
node. Only show the instruction if there's no location.
This also exposes `Parse::Tree` and `TokenizedBuffer`, so that we can
pass a `SemIR::File` without the component parts. In particular this
allows us to get the `TokenizedBuffer` for import IRs without
substantial structural modifications. We may want to make these optional
for serialized `SemIR` later, but the nodes/tokens contain source
location, which we'd need for debug information -- so it's not clear how
much we can really make them optional without substantial information
loss.
Reduce arguments to just `File` in a few spots, as a result of the
accompanying `TokenizedBuffer` and `Parse::Tree`. Also updates style to
pass around `const File*` where the reference is maintained, instead of
`const File&`.
I was considering keeping a direct reference to the tree and tokens on
`Context`, but initially my thought was it wouldn't make much
difference. I can re-add those if desired, just as direct caching of the
`File` fields.
Goal is to reduce churn in names in test updates (by churning a lot of
them in this PR).
---------
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
This seems slightly redundant for a locally-defined class, where there
will be a complete_type_witness instruction earlier in the class, but is
important for imported classes, where we're currently doing the wrong
thing in a way that's invisible in formatted SemIR.
This introduces `calling_convention_param_ids`, a single block that
consolidates all the information that was being used by consumers of
`param_refs` and `implicit_param_refs`, in a form that's easier to
produce and typically easier to consume.
See also [this Discord
discussion](https://discord.com/channels/655572317891461132/655578254970716160/1300545448909738125)
regarding the decision to keep the return slot last in the SemIR calling
convention, even though it goes first in the LLVM calling convention.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
The new `FacetValue` instruction represents `C as I` for some type `C`
and facet type `I`. It is named `FacetValue` instead of just `Facet` to
parallel the `FacetType` instruction.
This PR uses this instruction represent the facet value `Self` in an
`impl` declaration. This instruction will be used in the future to also
support things like:
* `C as I` where `C` is a class; and
* forming a specific for a generic with a `T:! I` parameter where `T` is
being given a concrete value.
(Here `I` is an interface or other non-`type` facet type.)
Also do some renaming and add some comments to make things a bit more
clear.
* `FacetTypeAccess` -> `FacetAccessType` to clarify this is not access
of a facet type, but access of the type of a facet
* `.facet_id` -> `.facet_value_inst_id` to parallel the `FacetValue`
instruction
`FacetAccessWitness` will be in a future PR.
---------
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
For the few remaining uses of the builtin `i32` type, manually build an
`IntType(Signed, 32)` value instead. These are:
- The return type of `Run`.
- The type that int literals in an `if` expression are converted into.
- The type of an array index expression.
We should consider converting those three cases away from `i32` over
time.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
When an `IntLiteral` appears as an operand of an `if` expression,
convert it to `i32` for now, so that we don't reject things like `if
cond then 1 else 2` due to having a non-constant value of type
`IntLiteral`.
For tuple indexing expressions such as `(a, b).0`, convert the index to
type `IntLiteral`, not to type `i32`. This isn't strictly necessary to
do in this PR, but avoids the need to provide an `IntLiteral` -> `i32`
implicit conversion for `no_prelude` tests using this syntax.
- Do not include entities imported from files that we are not dumping.
- Do not include constants and import_refs that are not referenced by
something that we are including in the formatted output.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Co-authored-by: Carbon Infra Bot <carbon-external-infra@google.com>
I'm working to make sure remaining diagnostics have coverage, at least
the ones I'd previously added a TODO for. Note in particular that I
couldn't figure out a repro for UnaryOperatorRequiresWhitespace; if you
have one, I can add a test, but otherwise maybe it's actually
unreachable due to being diagnosed through infix logic (or, maybe
this'll let fuzzing tell me an example).
This is primarily to free up space in the BindingPattern insts, but as a
side effect it moves the link between BindingPattern and its BindName
out of the SemIR, and into a transient data structure in Context.
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
This converts `StructTypeField` from an instruction to a dedicated type,
with its own store. This had originated from discussing how
`.GetAs<SemIR::StructTypeField>` was more prevalent than for other
instructions, but is probably more interesting for the storage savings
(16 bytes StructTypeField + 4 byte LocId + 4 byte InstId -> 8 byte
StructTypeField).
Due to the different structure, these now have their own stack during
construction, reducing (but not eliminating) `args_type_info_stack_`
use-cases.
The test changes of different InstIds is expected because structs and
classes generate fewer instructions now. Other than that, results should
remain the same.
I'm generally trying to avoid unrelated cleanup here due to the PR size,
though I did scrutinize the `VerifyOnFinish` calls, adding one and
commenting others (putting them in member order because that's how I was
checking what was verified and what wasn't).
This instruction represents integer values, whether they come from
literals or calculations, so it the old name is inaccurate. I also plan
to rename `BigInt` to `IntLiteral` based on recent discussion and this
change aims to avoid confusion stemming from the same name being used
for two different things.
I'm not renaming `FloatLiteral` because recent discussion suggests we
may want distinct `FloatLiteral` versus `FloatValue` representations in
SemIR.
Richard Smith
Jon Ross-Perkins
Dana Jansensandjosh11b
Alina Sbirlea
Geoff Romer
Boaz Brickner
Calvin
David Blaikie
