When an initializing expression is used to initialize a var parameter,
we need to create the storage earlier in SemIR than the initializing
expression. To do so, pass a pending block to initialization containing
the var storage.
Also stop using `temporary` for this purpose, since we treat temporaries
as potentially-constant and immutable, but `var` parameters can be
mutated by the callee. We should ideally introduce a new kind of
instruction for this purpose but for now we just use `var_storage`.
Mainly because "sorting_diagnostic_consumer" is legacy, since
`SortingDiagnosticConsumer` became `SortingConsumer`. Also better
reflecting contents of these files.
Where I'm not renaming, I'm less positive about dropping "diagnostics"
from "file_diagnostics" and "null_diagnostics" (which contain both a
consumer and emitter, and "null.h" seems like poor naming), so not doing
that here. Also "diagnostic.h" contains `struct Diagnostic`, so is a
decent fit.
Assisted-by: Google Antigravity with Gemini 3 Flash
I'm doing this because I figured it'd be an incremental improvement for
all the operator lookups that we do. Even to the extent that we've
discussed witness caching, I think it'll still apply. It does add one
more step to adding new interfaces (before, you'd just write the string,
now you add it to the def file and reference it).
I'll claim it makes GetClangOperatorKind a lot friendlier to read/edit,
nevermind removing the string comparisons. :)
Do this even if the operand is a `ConstType` instruction. This better
preserves the source form of the type, and avoids a special case.
Repeated `const`s are already flattened in constant evaluation, and this
special case also didn't prevent forming a `ConstType` whose operand is
`const` in general, only cases where the operand happens to literally be
a `ConstType` instruction.
This reverts commit eed21f6439.
As a byproduct, the only test that exercised the "address of a temporary
object" diagnostic now trigers the "address of a non-reference
expression" diagnostic. We could restore it by using a type that doesn't
support `value_of_initializer`, but it seems better to remove the
diagnostic altogether: not only does it simplify the code, I'd also
argue "non-reference expression" is more accurate as a user-facing
description of the operand.
This is to avoid edge cases where there are multiple `ConstType`
instructions, which code may not handle appropriately. I was thinking
about this for #6279
Following the direction of #5913, add support for parsing an `unsafe as`
operator. For now, we allow one additional conversion using `unsafe as`
beyond the conversions supported by `as`: we permit pointer conversions
that remove qualifiers, such as `const T*` -> `T*`.
Is it worth having a distinct diagnostic or phrasing for non-class types
(like tuples, structs, pointers, etc), also for declared-but-not-defined
class types (where we can't tell if they're final or not)? Happy to add
it, but not sure how much detail to put in here at this stage at least.
I chose "non-final type" as somewhat vague wording so it sort of applies
even to pointers/tuples/structs.
This adds something similar to the level of `const` support - that it's
a type, but not the conversions and limitations on usage that are
needed.
---------
Co-authored-by: Chandler Carruth <chandlerc@gmail.com>
Replace the binary `Operation` interfaces with the `OperationWith(T:!
type)` interfaces described in the design, and add a `Result` associated
type for both unary and binary operations. Update the `impl`s in the
prelude for integer types to use the new form, including supporting
implicit conversion of either operand.
I've tried to split this PR up into commits focused on distinct changes
for review convenience. It may be simplest to review it one commit at a
time.
This reclaims a bit inside `LocId`. I'm hopeful we don't actually need
to store the token-only state.
Note I'm looking at this in the context of desugaring; I was thinking
about changing `ToImplicit` logic a little to push more towards
`GetCanonicalLocId`, and the "desugaring" TODO there. Removing
`ToTokenOnly` makes me feel a little more free to rename `ToImplicit`,
since it eliminates consistency as a question.
Remove calls to `InstStore::GetLocId()` to build a LocId from an InstId
now that they can be constructed directly from the InstId. Most uses of
LocId are just plumbing, so this does not affect them. However places
that want to look inside the LocId do not want to work with the InstId
form. In these places, introduce `InstStore::GetResolvedLocId()` which
converts a LocId (or an InstId as an optimization) into a LocId which is
not backed by an InstId. These locations can be printed (they have a
line and column when they are a NodeId), they can have flags added to
them (`ToImplicit`, `ToTokenOnly`), they can be converted to an
underlying ImportIRInstId, or they may be `None`.
`Dump()` is made to print a resolved location instead of printing the
InstId in the location, since (at least in my experience) the resolved
location is what is interesting in debugging, and this saves manual
`MakeInstId` steps in the debugger every time a location is of interest.
The LocId constructor from InstId is made `explicit` to add clarity to
function calls passing an `inst_id` now directly instead of calling
`context.insts().GetLocId(inst_id)`. To avoid needing to construct
`SemIR::LocId(...)` explicitly in all cases though, the diagnostics code
in Check uses `DiagnosticLocId` as its template parameter which accepts
InstId as well and does the construction of LocId from it.
Because LocId now requires an explicit construction from InstId, any
callers to `AddInst()` functions will have to explicitly convert to
LocId if they had an InstId, but not if they pass a NodeId. To make this
difference clear to callers, we `requires` that the input type can be
converted to LocId. This ensures that passing an InstId results in an
error at the callsite where the InstId is passed, instead of generating
a compiler error when trying to construct `LocIdAndInst` inside
`AddInst()`, which is less clear about what went wrong and doesn't seem
entirely intentional.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Right now, return_scope_stack is being used to determine whether logic
is in a function scope. However, we need to handle nested entities
inside function scopes. For example where this crashes right now:
```
base class C(B:! bool) {}
fn F() {
class B {
extend base: C(true or false);
}
}
```
This is doing a few things to make this kind of code not crash:
- Split `scope_stack().Push` into `PushForDeclName`, `PushForEntity`,
`PushForExpr`, and `PushForFunction` so that better decisions can be
made about behaviors.
- Hide `return_scope_stack` in the API, instead using interfaces to get
at the underlying data.
- Also using `PushForFunction` to update it similar to the other stacks
that `ScopeStack` manages.
- Add `IsInFunctionScope` as the best way to determine presence in
function scope.
- Remove `PeekIsLexicalScope` since destruction really wants function
scope information anyways.
- Clean up `destroy_id_stack` handling to be for function scopes rather
than lexical scopes.
- Return after related `context.TODO`s in a couple more spots, so that
code doesn't proceed to add control flow in spite of the lack of
support.
---------
Co-authored-by: Geoff Romer <gromer@google.com>
We frequently want to operate on singletons. Per discussion, drop
`Singleton` to make the code shorter.
This started off as wanting to write `inst_id.is_error()`, but the
dependency relationship between ids.h and singleton_insts.h would
require some kind of delayed evaluation to allow the implementation to
remain in headers (which I suspect is helpful to have for inlining). I
could have added something like `IsErrorInst`, forward declared in ids.h
and defined in singleton_insts.h (which would always be included by
typed_insts.h), but the template approach felt like a decent balance
between (a) removing the boilerplate `::SingletonInstId`, (b)
understandability, (c) still visually mirroring if we immediately return
a singleton, and (d) flexibility for more than just `ErrorInst`. But TBH
I'd probably still have written `is_error()` if it didn't require
addressing the cross-header cycle.
Then I tried `SemIR::InstId::Is<SemIR::ErrorInst>`, which generally
worked with types but generated the complaint that it didn't shorten
*all* singleton uses. So pulling back on `::Is`, and instead just
dropping `Singleton`.
Each of these types takes another type as an operand. Instead of storing
that other type as a `TypeId`, store it as an `InstId` so that we can
track how it was written, not only its canonical form.
The canonical constant values of these types continue to store the
canonical constant values of their operands, as normal.
---------
Co-authored-by: Dana Jansens <danakj@orodu.net>
Fixes#5186
With @zygoloid's kind assistance, this generalizes the existing
non-const lowering of ClassInit, that had previously only handled
InitializeFrom, to find other cases - such as a nested ClassInit used to
initialize a class member.
This refactors the `FindReturnSlotArgForInitializer` from
`check/convert.cpp` into `sem_ir/file.{h,cpp}` for use from lowering
(since lower doesn't depend on check, which I assume is an intentional
layering constraint - so figured it made sense to move it to sem_ir, and
found one or two similar-ish utility functions in `sem_ir/file.{h,cpp}`,
so figured that was a good spot)
This in particular uses free functions because it's likely to end up
more consistent with types (versus a wrapper object for InstStore).
Note, this is unlikely to have a performance impact, but if it does, we
can look into related approaches (and we've already discussed using
LTO).
Renames `PendingBlock::AddInst` to `PendingBlock::Add` because
`MakeElementAccessInst` expects the matching name to exist.
This creates a new check/type.h for most logic, and also moves some
functions to TypeStore in sem_ir/type.h. My approach for TypeStore is to
focus on moving the read-only functions there.
context.cpp is getting large, so I'm looking at a few ways to cut out
clusters of functions. This felt like a logical cluster of functions to
move to their own file.
Note this doesn't touch the implementation at all, beyond what's needed
to change from `Context` members to context args.
This is a precondition for enabling the new pattern-matching subsystem
to support binding patterns that have `if` expressions in the type
position.
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
`ids.h` and `ids.cpp` are the manual edits, everything else is
search-and-replace.
The full list of things moved is:
- `TypeId::TypeType`
- `TypeId::AutoType`
- `TypeId::Error`
- `ConstantId::Error`
This is to unblock removing `InstId::Builtin*`.
This is for more clearly distinct names, and to make it a clearer
transition from `BuiltinInst` for name conflicts. `FloatType` is also an
instruction, and we have `Carbon::Error` (common/error.h). This avoids
affecting tests, although the name is embedded in the builtin test.
In `LegacyFloatType`, `Legacy` because I was having trouble coming up
with a more appropriate name. I'm not clear this is a `FloatLiteralType`
at present, it needs some work to mirror `IntLiteralType`.
In `ErrorInst`, the suffix `Inst` was discussed as good and similar to
`BuiltinInst` (although I'm trying to get rid of that).
Instead of stringifying types in the caller in some cases, add new types
to represent:
- `InstIdAsType`: an `InstId` diagnostic argument that represents a type
expression that should be included in the diagnostic
- `InstIdAsTypeOfExpr`: an `InstId` diagnostic argument that represents
an expression whose type should be included in the diagnostic
For these cases, we can produce more user-friendly descriptions of a
type than we can with a canonicalized `TypeId`. Add comments to
discourage using `TypeId` diagnostic arguments when one of the above can
be used, and move over existing uses where it's straightforward to do
so.
Move type stringification code to its own files and out of `SemIR::File`
to make `File` smaller and to further discourage the direct use of the
stringification logic.
Also update type printing to include the `` ` `` delimiters surrounding
the type. The intent is that we will eventually want to include other
information when formatting a type, like Clang does when printing a
typedef (`'string' (aka 'std::basic_string<char>')`), and such
formatting requires that the diagnostic machinery produces the `` ` ``s
itself.
There are a couple of cases where we really want to format valid Carbon
type syntax directly into a diagnostic, rather than an `aka` or similar,
because the diagnostic text includes part of the type itself, for
example: ``"consider using `partial {0}`"``. For such cases, a `Raw`
form of the diagnostic argument types is added: `TypeIdAsRawType` and
`InstIdAsRawType`. In principle we could instead use ``"consider using
`partial {0:raw}`"``, but our diagnostic machinery isn't set up for
that.
---------
Co-authored-by: josh11b <15258583+josh11b@users.noreply.github.com>
This is a primarily automated change:
- Search & replace for capitalization
-
`(CARBON_DIAGNOSTIC\((?:\n\s+)?\w+,(?:\n\s+)?\s\w+,(?:\n\s+)?\s")([A-Z])`
- `$1\L$2`
- Search & replace for period
-
`(CARBON_DIAGNOSTIC\((?:\n\s+)?\w+,(?:\n\s+)?\s\w+,(?:\n\s+)?\s"(?:[^)]|\n)+)\.("[,)])`
- `$1$2`
- Limited search & replace for `ERROR: ` -> `error: ` in streamed things
- Leaving a TODO for command_line because there's more cleanup that can
be done there
- Modify diagnostic_consumer.cpp
- ERROR -> error
- WARNING -> warning
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Add these interfaces to the core library. For now, they're two separate
interfaces because we don't yet support one interface extending another.
This collapses a lot of the layering in check: for example, the call
building logic depends on implicit conversions, conversions now depend
on the overloaded operator machinery, and that machinery depends on
building calls.
In passing, improve the diagnostics for failing to find a name required
from the prelude. Also convert all the transitively-called code from
`NodeId` to `LocId` given the latter is what the conversion machinery
has available.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
This is for consistency with #4120. Similar to that, we can use
overloads on the typed NodeId rather than individually named handlers.
There isn't the same caller benefit here though, since the calls from
check.cpp are already boilerplate.
Most of these are places where we failed to include a header file and
simply never got an error about this. The fix is to include the header
file.
Most other cases are functions that should have been marked `static` but
were not. Finding all of these was a main motivation for me enabling the
warning despite how much work it is.
One complicating factor was that we weren't including the `handle.h` for
all the state-based handler functions. While this isn't a tiny amount of
code, it is just declarations and doesn't add any extra dependencies. It
also lets us have the checking for which functions need to be `static`
and which don't. For the `parse` library I had to add the `handle.h`
header as well, I tried to match the design of it in `check`.
I have also had to work around a bug in the warning, but given the value
it seems to be providing, that seems reasonable. I've filed the bug
upstream: https://github.com/llvm/llvm-project/issues/94138
I also had to use some hacks to work around limitations of Bazel rules
that wrap `cc_library` rules and don't expose `copts`. I filed a bug for
`cc_proto_library` specifically:
~https://github.com/bazelbuild/bazel/issues/22610~https://github.com/bazelbuild/bazel/issues/4446
Trying to conform with #4009. Changes SemIR::LocIdAndInst construction
to root out struct init cases with AddInst and related functions. I'm
using templating of AddInst functions in order to avoid `AddInst(loc_id,
InstName{...})` and instead have `AddInst<InstName>(loc_id, {...})` with
I think similar readability results. There are a couple cases where inst
construction is templated and so designated initializers couldn't be
used, so this may be better for those in particular due to the extra
type enforcement.
This probably doesn't clean up every last case, but I was trying to get
the bulk at once without bleeding over into less related changes.
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
These can't be supported by `TryEvalInst`, because we don't track
sufficient information about predecessors and branch conditions in SemIR
to efficiently compute the constant result. Even if we could do so, we
may not want to treat all `BlockArg`s for which we can infer a constant
value as being constants. Instead, set the constant value explicitly
after creating the corresponding `BlockArg` instruction.
Rename `BoolValue::FromBool` to `BoolValue::From` as requested in #3816.
Add `BoolValue::ToBool`.
Convert existing code to use these where appropriate.
Support is added for all overloaded operator interfaces in the current
design apart from `Assign`, which is going to require some more work to
properly handle, given that primitive assignment currently has a special
implementation for quite a few builtin types.
As we don't have support for generics yet -- in particular, generic
interfaces -- there is no support for `*With` interfaces, but homogenous
interfaces such as `Add` are supported instead.
Factor out building of call expressions so that overloaded operators can
generate calls.
Switch a few places from using specific kinds of NodeId to a general
NodeId. Because overloaded operators and other things like implicit
conversions can result in member access and function calls, those
operations can't require a specific kind of NodeId.
Add import support for associated entities, and fix import support for
interfaces and symbolic bindings. We now import interfaces in two steps,
first importing a forward declaration then a definition, just like we do
for classes. For symbolic bindings, we ensure that each BindSymbolicName
is imported only once, because its ID is used as its symbolic identity.
This is necessary because we (only) support operator interfaces that are
defined in an imported Carbon package for now.
The entire contents of `check/operator.cpp` should probably be
rethought. In particular, doing a lot of name lookups on each operator
is likely to be bad for performance. But this gets us to the point where
overloaded operators are basically working, which seems like a good
place to iterate from.
For now, the tests that the individual operators map to the right
interfaces are mostly generated by a script, but that's just because I'm
expecting a fair bit of churn in how we define the prelude and the
`impl`s -- in particular, when we add support for `AddWith`, we'll need
to update all the tests. The plan is to remove the script once things
settle down.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Co-authored-by: Carbon Infra Bot <carbon-external-infra@google.com>
This change implements the check behavior for the arrow operator.
`ptr->Foo()` is rewritten as `(*ptr).Foo()` and `ptr->(X.y)` is
rewritten as `(*ptr).(X.y)`
This was previously discussed at
https://discord.com/channels/655572317891461132/655578254970716160/1209975051588210729.
I'm initiating this mainly because we typically use "id" suffixes to
indicate an `IdBase` being passed around and the non-id suffix of
`parse_node` suggests at it carrying more data than it actually does.
There used to be more reason for avoiding `node_id` because
`SemIR::InstId` used to be named `NodeId`, but that's no longer
necessary. As a consequence, I'd like to rename `parse_node` to more
precisely reflect its type.
In full, this is doing:
```
parse_node_kind -> node_kind
parse_node -> node_id
ParseNodeCategory -> NodeCategory
ParseNodeKind -> NodeKind
ParseNode -> NodeId
```
This is primarily in check and sem_ir, but with some `parse_node_kind`
references in parse too.
Pluralization is consistent with name forms on both sides, so that
wasn't part of my replacements.
Note we may also want to do this with NameId, maybe some other things,
but the TypeId use is pretty broad and repetitive -- I thought I'd start
with it first.
Also, form `addr_of error` instead of `addr_of operand` when `operand`
is not a reference expression, so that we don't try to constant-evaluate
a meaningless expression.
Also, expect a constant for an array bound rather than specifically an
integer literal. This allows constant evaluation results to be more
easily tested by inspecting array bounds.
The parse nodes are still tracked as part of the same value store
interface in order to ensure parity, but they're split out from Inst
itself in order to reduce the size of Inst -- the expectation is that
they don't need to be passed around quite as much.
This change doesn't actually reduce the passing very much, although
there are hints of it: AddInstAndPush doesn't typically need a separate
parse node from the one on the Inst itself, for example. In a couple
spots I changed code to rely a little more on the InstId until the
ParseNode is needed, but it's very low hanging fruit where done. I think
convert could do more to not eagerly fetch the parse node before its
use, but more cleanup felt it would be easier to handle separately. I'm
currently viewing this as making such cleanup _possible_ rather than
executing on it up-front.
But also, I want to make sure there's a consensus to head in this
direction before pulling the trigger. We speculated that this would
result in the parse node being passed around less, and I do think that's
the case, although it's a bit fuzzy in the change.
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Goal is to increase type safety, though more work needs to be done (see
added TODOs).
Note that, after this change, check handlers corresponding to deleted
parse node kinds will no longer compile.
---------
Co-authored-by: Chandler Carruth <chandlerc@gmail.com>
Richard Smith
Jon Ross-Perkins
Geoff Romer
David Blaikie
Dana JansensandJon Ross-Perkins
CJ Johnson