This is iterating on how `Destroy.Op` generates, to start adding body
capabilities. This changes the way the signature is created, and adds a
`CoreWitness` function kind so that mangling can prevent name
collisions. The result is that what _was_ `DestroyOp` is now
`Core.Destroy.Op` or, as can be seen in
toolchain/lower/testdata/interop/cpp/nullptr.carbon,
`_COp.<hash>:core.Destroy.Core` where `:core` is indicating that it's a
core witness (taking a note from `:thunk`).
Assisted-by: Google Antigravity with Gemini 3 Flash
This allows us to capture the location at which a type literal was used,
even in the cases where we don't otherwise need to create a new
instruction to represent the type such as for `char` or `str`.
The logic used to build the underlying type is now marked as desugaring.
For cases such as `iN`, this causes the call to `Core.Int` to no longer
be added as a dedicated IR instruction, and instead its constant value
is used directly as the value of the `type_literal`. This results in
this being on balance a reduction in the size of the IR.
This also fixes a crash in C++ interop when using a `char` literal as a
template argument. The crash was caused by the template argument not
having an associated location when mapping to a C++ location. See
changes to check/testdata/interop/cpp/template/type_param.carbon for an
example that used to crash before this change.
Update alias handling to allow an alias to point at any type literal,
reinstating support for aliases for type literals such as `bool` and
`i32` that had previously worked but stopped working when we
transitioned those types to being defined in the prelude. See changes to
toolchain/check/testdata/alias/builtins.carbon.
All the test changes other than the two mentioned above are mechanical
autoupdate changes switching to the new instruction.
Implementation of unused pattern bindings #2022, continued.
Whereas previous PR #6460 took care of parsing, and PR #6479 prepared
the stage by using _ in some test cases, this PR has the the actual
implementation, using a simple dataflow analysis.
---------
Co-authored-by: Burak Emir <bqe@google.com>
Co-authored-by: jonmeow <jperkins@google.com>
Currently each interface has a `Self` facet internally that becomes a
binding to every entity inside the interface: associated constants,
functions, and require decls. Each of these has to be independently
generic as a result. This makes is challenging in extended name lookup
to move into an extended scope of an interface, as we have a specific
for the interface, but the names within require a different specific
that includes a `Self` facet value.
We generalize this relationship by adding a second generic to Interface,
called `generic_with_self`. When we want to work with entities inside
the interface, we move from the interface-without-specific to the
interface-with-self specific by adding a Self to the specific. This is
done independently of any particular entity inside the Interface, as
those entities are now all members of the interface-with-self generic.
Associated constants no longer need a generic of their own, as they do
not have separate generic bindings. Functions retain a generic, but if
the function has no generic arguments, it will have no bindings of its
own now.
Require decls retain a generic so that their specific can be
instantiated separately from the interface. Requiring the interface to
be complete does not require the types in a require decl to be complete
unless it is modified by `extend`. So we allow them to be completed
later by keeping them in a separate generic.
Named constraints look like interfaces and gain the additional inner
generic-with-self, with the same relationship to require decls.
This removes the need for name lookup to perform Substitution of a Self
facet into the extended scope instruction. Instead, the
`SpecificConstant` instruction inserted by a `require` decl is part of
the interface-with-self generic. When looking through a FacetType for
extended scopes, for each interface, we push the scope with the specific
for the interface-with-self. Then the constant value of the
`SpecificConstant` is correctly modified by the provided self
automatically through applying that specific.
The primary change in this PR is to split the `Initializing` expression
category into separate `ReprInitializing` and `InPlaceInitializing`
categories, depending on whether initialization uses the types
initializing representation, or is guaranteed to be in place. It also
rationalizes and documents the SemIR-level semantics of those categories
(including where #5545's "ephemeral entire reference" category will
fit), and introduces two new inst kinds to close gaps exposed in the
process.
Some additional secondary changes:
- Consistently format the storage arguments of initializers with `to`,
regardless of whether initialization is in-place, and document the `to`
notation.
- Rename some inst kinds and functions, and restructure some of the
code, for clarity and consistency with the new documentation.
- Resolve a TODO to handle more category conversions in
`CategoryConverter`, in order to make it easier to reason about category
conversions.
See #6588 and the review history of this PR for background.
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Pursuant to recent decisions on #6124, switch `Destroy` to use a
`CustomWitness` for its implementation. Right now this is manufacturing
no-op implementation functions on each lookup, which obviously isn't
ideal but is intended as a first pass. I'm mostly trying to find the
right balance between updating the approach to reflect new decisions,
while still breaking apart work in a way.
The `CoreInterface` logic is intended to build on `CoreIdentifier`
support. We have a number of additional interfaces that require
specialized logic, and that'll extend pretty far with C++ interop, so it
seemed easiest to have a generic function for it. That's what's
replacing the logic inside C++ interop that was doing string comparisons
(which could have already been moved to `CoreIdentifier`, I just missed
it in my first pass).
This adds `CustomWitness` support because the `Destroy` witnesses can be
imported cross-file. `CustomWitness` was previously only used for C++
types, which don't yet support import, which is why that wasn't
previously an issue. The addition of `query_specific_interface_id` is
similarly needed in order to get correct sorting of witness blocks when
imported.
This PR also removes builtin constraint logic (note this is in a
separate commit to help review; it's not a separate PR because it's
difficult to split apart without tests breaking). This had been made
generic with the expectation that destroy, copy, move, and conversions
would all need related support. Under the new decision, we are not going
to do blanket impls and will instead just manufacture a `CustomWitness`
for everything.
A lot of SemIR fingerprints change, but that's probably because the
addition of `Destroy` on core classes is yielding structural changes.
Instead of naming the root namespace `package` (because it's accessed by
the `package` keyword), change it to use the current package name. Note,
buried in the checksum changes,
`toolchain/check/testdata/package_expr/fail_not_found.carbon`:
```
- // CHECK:STDERR: fail_not_found.carbon:[[@LINE+4]]:16: error: member name `x` not found in `package` [MemberNameNotFoundInInstScope]
+ // CHECK:STDERR: fail_not_found.carbon:[[@LINE+4]]:16: error: member name `x` not found in `Main` [MemberNameNotFoundInInstScope]
```
for:
```
// CHECK:STDERR: var y: i32 = package.x;
// CHECK:STDERR: ^~~~~~~~~
```
I'll leave it to you if you prefer this; the alternative I see is to
just rename `IsCorePackage` to `IsImportedCorePackage`, and/or change it
to a helper that takes a `Context` and does the right thing with
`parse_tree` (which, I need for `Destroy`-related reasons and was my
default approach).
This is a prerequisite for support for interop with C++ template names.
No behavior change here, except that it sadly changes the fingerprinting
for a lot of tests.
This resolves a TODO in `expr_info.cpp` by using the inst kind rather
than the bound value to track the binding's category.
Since we're churning all the `bind_name` insts in testdata anyway, I'm
also taking this opportunity to align the inst naming with the design's
terminology, by calling these insts "bindings" (this aspect of the PR is
dependent on #6231 resolving an ambiguity in that terminology). For
consistency we'll need to rename several other insts as well (see the
TODO on `RefBinding`); I'm deferring that to a separate PR to minimize
the review load, but I think those name changes are in-scope for this
review.
When deducing arguments for generic parameters of an `impl`, the
deduction calls `Convert` on the input arguments. Often, the input
argument is a facet, and needs to be converted to a type via
FacetAccessType in order to produce a different facet. These
instructions end up being added to the semir, but only their constant
values are needed for the resulting specific returned from Deduce.
In the best case, these extra instructions are just noise in the semir,
or they just cause instruction names to get differentiated with larger
suffixes.
In the worst case, these extra instructions contain references to
instructions from a generic context, and leak them out of that generic
context and into another. In particular, when importing a
LookupImplWitness instruction, the re-evaluation of it can do deduce
(when the lookup is against a generic `impl`). The instructions created
in Deduce are not part of the import, and end up referring to imported
instructions from the local context, which leads to confusion in the
toolchain, and can crash.
The `import_self_specific.carbon` test demonstrates this. It causes the
`I.F` function to be imported from the `I` interface when building the
witness table for the `impl`. Doing so imports the specific of `C` which
includes a LookupImplWitness for `Self.Accoc` in `I`. The `Self` is a
BindSymbolicName with generic binding index 0, in `I`. When Convert
creates instructions in the generic `impl forall D`, however, they end
up referencing and including this BindSymbolicName into its eval block.
But the generic binding 0 in the `impl` is a very different thing (a
value of type `E`). This confusion leads to crashes.
The SymbolicBindingType refers to the type value that will be
substituted in for the BindSymbolicName, but holds onto the EntityNameId
from the BindSymbolicName instead of (or in addition to, for now) the
instruction.
The EntityNameId will be used to look in the ScopeStack to find the
witnesses either from the BindSymbolicName instruction, or other
instructions that specify `impls` constraints against the EntityName.
This will allow us to have the `T` in `I(T)` resolve to a `.Self`
reference in the type so that we get type equality with the binding's
type: `T:! I(.Self)`.
After this change, we correctly increment the offset by the next switch
case type.
Before this change, we accidentally incremented the offset by
`functions()` size instead of `cpp_overload_sets()` size and vice versa.
Also sorted the switch cases according to the order of the enum, for
consistency. This might help prevent a future similar incident.
This fix prevents crashing in the newly introduced test
`multiple_too_few_args_calls`.
This also has the side effect of showing `null name` for
`cpp_overload_set_type` and `cpp_overload_set_value`, instead of having
an arbitrary name.
Examples that demonstrate the old name is arbitrary can easily be seen
in tests like `cpp_namespace.carbon` and `decayed_param.carbon`, but
careful review would show that all old names are arbitrary, though often
luckily almost make sense.
We might want to have a proper name for these, but it's beyond the scope
of this crash fixing change.
See #6156.
Part of #5915.
This also does a little restructuring in the same direction, following
#6124.
Leads want `Destroy` to work similarly now for all types. As a
consequence, there doesn't seem to be as much benefit to splitting off
aggregate destruction. In this PR, the `type.destroy` function can now
be expected to destroy anything that's destructible; that means it'll be
usable for the `final fn` once that support is available.
Similarly, this gets rid of the impls other than the single blanket
impl, now using `type.can_destroy`. Since they all need to use the same
function, there's no benefit to splitting approaches. Also, now it can
just be a `final impl` since there should be no need for people to
create specializations -- if this blanket impl applies, it means the
`final fn` is the same.
This also slips in `partial` support since there's no reason to have it
diverge anymore. Also `abstract`, which I'm not sure is broadly testable
since most cases it'd come up, the `abstract` keyword is explicitly
detected/rejected.
Note though that this doesn't make any really big changes. It's just
realigning on the leads decision. I'm going this way to try to reduce
name-related churn for other changes.
Locations are similarly fragile, because adding a comment changes them.
This has made me pause when making prelude changes in #6144, so dropping
them for those cases.
Instruction ids aren't actually that interesting outside debugging, and
can be churny when doing other structural changes. I've seen this in
particular when doing singleton changes, which bump every instruction
id.
Note there are still other ways fragility from locations can crop up.
This shouldn't be considered a complete fix, but hopefully a small
improvement.
Right now, the class destroy impl is incorrectly generated (first
discussed [in
Discord](https://discord.com/channels/655572317891461132/941071822756143115/1418614787449032826)).
If we want it to be correct, deferred definition logic would need to be
added, and the declaration would need to be moved inside the `class`
scope (along with whatever generic logic that needs).
This instead switches to a blanket impl, to avoid creating latent bugs
with generating the `impl` and function body in the wrong scope. This
approach uses the same blanket impl as aggregate destruction that was
added by #6098.
The intent here is to allow progress on other parts of `Destroy`. For
example, under this model the implementation of the function body could
be done as part of lowering the specific.
If a `BindSymbolicName` is converted to `type` and then to its exact
`FacetType`, we get a `FacetValue` wrapping the `BindSymbolicName` but
providing no different information: it has the same witnesses and
`FacetType` as the original `BindSymbolicName`. Yet it is a different
constant value, creating multiple canonical forms with the same meaning.
Now we make that `FacetValue` with the same `FacetType` as the
`BindSymbolicName` it wraps evaluate back to the `BindSymbolicName`,
making it the unique canonical form.
This makes the "shortcut" in convert for avoiding impl lookup when
converting from `FacetAccessType` to `FacetType` in this exact scenario
work the same as doing the full impl lookup.
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Include notes listing the candidates and explaining why they didn't
work. Rather than duplicating the (substantial) logic for this, use the
Clang machinery to generate these diagnostics.
In order to support this, add a mechanism to map `SemIR::LocId`s to
`clang::SourceLocation`s. This works by creating source buffers in Clang
that refer into the Carbon source file so that `SourceLocation`s can
point into them.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Mark C++ functions as used when overload resolution selects them, and
trigger Clang's end-of-TU processing at the end of the Carbon
compilation to perform instantiation and other pending cleanup steps.
Add `Dependent` value and initializing representations for types whose
representations are unknown because they are dependent. When generating
SemIR in such cases, use a worst-case initializing representation that
both provides a destination address and also propagates a potential
result value.
Use this to fix incorrect lowering and lowering crashes for specific
functions involving generic types that don't use a copy value
representation.
In lowering, be careful to distinguish between whether the initializing
representation for the generic return type uses a return slot (which
affects whether the SemIR declaration and call have one) and whether the
initializing representation for the specific return type uses a return
slot (which affects whether the LLVM IR declaration and call have one).
This is in support of a goal of changing the blanket `destroy` impl to
use (roughly):
```
private fn CanAggregateDestroy() -> type = "type.can_aggregate_destroy";
// Handles aggregate type destruction.
impl forall [AggregateDestroyT:! CanAggregateDestroy()] AggregateDestroyT as Destroy {
fn Op[addr self: Self*]() = "type.aggregate_destroy";
}
```
That isn't done here because there's still other issues that migrating
raises. What this *does* do is add the builtin functions, and in
particular, support to `FacetTypeInfo` to make `CanAggregateDestroy`
work.
The "special requirement" approach in `FacetTypeInfo` allows us to
support restricting a blanket impl under the current approach of impls.
Maybe we'll find a cleaner approach that can work in the future, but
this fits into the current model by propagating similar to other
requirements. I'm using an enum mask because we have a number of similar
things to add (e.g. copy, move) but I'm not sure we need a full vector.
A few alternatives considered were:
- Supporting syntax more like `where .Self impls
TypeCanAggregateDestroy(.Self, SupportedInterface,
UnsupportedInterface)`. I think it'd be a little cleaner, but requires
better compile-time evaluation in order to assess the type of the call.
Right now it's expected to be a `FacetType` too early to make this work,
and I was concerned about pouring too much more time down this route.
- Providing an actual interface, in particular doing name lookup back
into `Core.` for an interface. This would've added name lookup overhead,
and the question of whether an `impl` exists.
- Generating an interface. This avoids the name lookup, but would still
raise the question of whether an `impl` should also be generated. Work
I've previously done generating interfaces for class destruction also
feels complex to both write and understand (an unfortunate issue).
- Still modeling as an `ImplsConstraint`, for example by defining a
special `InterfaceId::CanAggregateDestroy = -2` similar to what we do on
other ids. I was hesitant because of how this expands the number of
modes of `InterfaceId`, and things for consuming code to watch out for,
for what feels like a relatively niche set of use-cases that are only
interface-like.
---------
Co-authored-by: Dana Jansens <danakj@orodu.net>
As proposed in [Carbon: C++ interop for overloaded functions and
function
templates](https://docs.google.com/document/d/1KUxumZtNe3mY3TsjW2s_ZADOlAaFlrtsLKHVILtqIaM/edit?tab=t.0),
Clang is used to perform the overload resolution using C++ rules, when
an overloaded C++ set is called from Carbon. Once a function is
selected, it's converted into a Carbon function and called using the
Carbon rules including argument conversions.
A single non-templated function is treated the same way as an overload
set and the same rules apply for its call.
Template functions are not supported yet.
Demo:
a) Non-templated function calls:
```c++
// --- overloads.h
auto foo(int a, short b) -> void;
auto foo(double a) -> void;
auto foo(int a) -> void;
```
```c++
// overloads.cpp
#include "overloads.h"
#include <cstdio>
auto foo(int a, short b) -> void {
printf("hello from foo_int_short(%d, %d) \n", a, b);
}
auto foo(double a) -> void { printf("hello from foo_double(%f) \n", a); }
auto foo(int a) -> void { printf("hello from foo_int(%d) \n", a); }
```
```c++
library "Main";
import Cpp library "overloads.h";
fn Run() -> i32 {
Cpp.foo(1.1 as f64);
return 0;
}
```
```
$ clang -c overloads.cpp
$ bazel-bin/toolchain/carbon compile main.carbon
$ bazel-bin/toolchain/carbon link overloads.o main.o --output=demo
$ ./demo
hello from foo_double(1.100000)
```
b) Constructors:
```c++
// --- constructor_overloads.h
class C {
public:
C();
C(int a, int b);
};
```
```c++
// constructor_overloads.cpp
#include "constructor_overloads.h"
#include <cstdio>
C::C() { printf("hello from C() \n"); }
C::C(int a, int b) { printf("hello from C(%d, %d) \n", a, b); }
```
```c++
library "Main";
import Cpp library "constructor_overloads.h";
fn Run() -> i32 {
let c1: Cpp.C = Cpp.C.C();
let c2: Cpp.C = Cpp.C.C(1, 2);
return 0;
}
```
```
$ clang -c constructor_overloads.cpp
$ bazel-bin/toolchain/carbon compile main.carbon
$ bazel-bin/toolchain/carbon link constructor_overloads.o main.o \--output=demo
$ ./demo
hello from C()
hello from C(1, 2)
```
Follow-ups:
- `Cpp.foo({})` - proper handling of struct literals as call args.
- Fix access for overloaded sets.
- Fix tests:
- Method calls: `error: missing object argument in method call
[MissingObjectInMethodCall]` in tests.
- Fix `toolchain/check/testdata/interop/cpp/import.carbon` test.
- Fix `enums` support.
- Fix `str` -> `std::string_view` mapping.
Part of #5915
This prevents a null pointer access crash when generating a thunk with
an automatically deduced trivial return type.
In this case, Clang calls `Sema::DeduceFunctionTypeFromReturnExpr()`
which calls `Sema::getReturnTypeLoc()`, which requires this information.
Part of #5514.
The none.carbon min-prelude is not just an empty prelude, it also
prevents any prelude from being imported at all. So no import machinery
runs before the test, only the `package` statement from the prelude
would run.
Use the none.carbon min-prelude in a few tests that were specifying
`--no-prelude-import` to give it a trial run.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
All except
`toolchain/check/testdata/interop/cpp/function_param_int*.carbon` and
`toolchain/check/testdata/interop/cpp/function_return.carbon`.
Don't output SemIR for cases that are intended to fail.
This mirrors how imports work in general, that the imported declarations
shouldn't belong to the first referencing scope (particularly apparent
when referenced across multiple scopes). I think this was just an
oversight here.
People seemed receptive [on
#toolchain](https://discord.com/channels/655572317891461132/655578254970716160/1379196447827689553),
so proceeding.
For the two name conflicts, I've set it up so that there's a
"foo.carbon" and "foo_with_prelude.carbon", to indicate that the
no-prelude approach is preferred (with a shorter name).
Note min_prelude will require a little more work/thought, I want to
avoid adding `--custom-core` etc.
Nicholas Bishop
Jon Ross-Perkins
Dana Jansens
Richard Smith
Geoff Romer
Boaz Brickner
Ivana Ivanovska