In `BuildUnaryOperator`, `GetOperatorOpFunction` is treated as
desugaring, but `PerformCompoundMemberAccess` and `PerformCall` are not.
This treats all of destruction as desugaring.
This leads to some instructions being elided, because of `GetOrAddInst`
behaviors:
> // If the instruction has a desugared location and a constant value,
returns
> // the constant value's instruction ID. Otherwise, same as AddInst.
This changes instructions that previously had a non-desugared location
to instead have a desugared location, so if they also have a constant
value then the constant value can be used directly.
This changes `Destroy` to use an interface for its implementation.
Note that this change includes a lot of test updates. Even when
`Destroy` is a no-op, it still causes code generation as part of
determining that.
Originally I was trying to use ranges to cut down the scope of this, and
to a degree I think they have. But a flipside here is that cases where
no destructors should be generated -- particularly globals -- would be
needed to completely remove destructor calls. Even for ranges, the range
can often include the destructor placement. So I've shifted
frame-of-thought a little: accept a bunch of destructor churn, because
destructors are needed and will be prevalent. The verbosity is a feature
of the design to make desugaring apparent in IR, not a bug.
For some of these, it's just replacing with min_prelude/none.carbon.
Some had min_preludes specified, and I'm generally switching those to
none.carbon as well. The one exception is the destroy.carbon test, which
I noticed because of #5678
The none.carbon min-prelude is not just an empty prelude, it also
prevents any prelude from being imported at all. So no import machinery
runs before the test, only the `package` statement from the prelude
would run.
Use the none.carbon min-prelude in a few tests that were specifying
`--no-prelude-import` to give it a trial run.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
When the binding pattern appears within a `var` pattern, convert to a
reference. Otherwise, convert to a value.
This gets the advent of code examples to produce the right answers again
:)
---------
Co-authored-by: Geoff Romer <gromer@google.com>
import_use_generic.carbon has the comment "// We're just checking that
this doesn't crash. It's not expected to compile." Because it involves
import behavior by name, I'm not touching it. Other than that, while
maybe it's better to test with less, the `ImplicitAs` errors at best
feel difficult to understand, and at worst could be masking an issue.
Now that included files can specify `EXTRA-ARGS`, this uses that to
handle min_prelude files. Also moves `As`/`ImplicitAs` out to a shared
file, partly because we duplicate it a few times over, partly just to
show that it works.
Also removes the `min_prelude/` subdirectories because many of these
files were touched by autoupdate regardless. I noticed one conflict for
`impl_thunk.carbon`, so renaming that one to
`impl_thunk_min_prelude.carbon`.
`GetArgReplacements` I simply noticed was unused, so removing it.
People seemed receptive [on
#toolchain](https://discord.com/channels/655572317891461132/655578254970716160/1379196447827689553),
so proceeding.
For the two name conflicts, I've set it up so that there's a
"foo.carbon" and "foo_with_prelude.carbon", to indicate that the
no-prelude approach is preferred (with a shorter name).
Note min_prelude will require a little more work/thought, I want to
avoid adding `--custom-core` etc.
Now that I'm getting to a relatively low number of remaining files for
this cleanup, this is my second look for things that I missed before in
directories that were generally already swept up (mostly by the TODOs).
Where `--no-dump-sem-ir` is used, change to `--dump-sem-ir-ranges=only`.
Otherwise, add `--dump-sem-ir-ranges=if-present` with a TODO to change
to `only`.
Note, SemIR is affected just because the extra comments change line
numbers in files where splits aren't in use.
Previously we walked the global variables defined by the current file
and emitted an LLVM global variable definition for each of them. Now
instead, when emitting a constant reference to a global variable, we
emit an LLVM global variable declaration, and we then subsequently walk
the global variables defined by the current file and convert each of
them from a declaration to a definition.
In order to make import of names of global variables work, add support
for import of `var`, as well as support for importing `tuple_access` and
`tuple_pattern` in the case where the `var` has a tuple pattern in its
declaration. Also treat `bind_name`s that are reference bindings to
`var`s as having the same constant reference value as their `var` so
that we can properly import and lower them.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Co-authored-by: Carbon Infra Bot <carbon-external-infra@google.com>
When a pattern is an error, avoid wrapping it as a subpattern in a
RefParamPattern or VarPattern. This allows further error handling to
observe the error occurred without having to unwrap it.
This avoids a crash when an invalid associated constant is written which
has a VarPattern in it. The associated constant machinery expects an
AssociatedConstantDecl but was getting a VarPattern with an ErrorInst
inside. Now it receives an ErrorInst directly, which it is already
looking for.
This choice means that `var` statements in an `interface` will always be
diagnosed as being non-constant, or as being a constant with a `var`, so
we don't need an extra diagnostic saying that `var` is not allowed in an
interface, as this just leads to two diagnostics on the same thing.
This crash was found by a fuzzer.
- Track the `VarPattern` instruction on the `VarStorage` instruction so
that it's available for name mangling.
- Mangle global variables based on the first binding name within their
pattern.
- Give global variables external rather than internal linkage, except if
they have no bindings whatsoever in their pattern.
- To support lowering references to bindings nested within a global var,
such as for `var (x: i32, b: i32)`, add some basic initial support for
reference constant expressions. Treat a global `var` as a reference
constant, and treat an aggregate access into a reference constant as a
reference constant.
This restructures the import and merge logic to support parameter
patterns in a more scalable way.
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
This is making two inter-related changes:
- Change `file` to reuse the formatter logic of `constants` and
`imports`, meaning empty `file` scopes will be omitted
- Mark `<elided>` sections in blocks (not in non-block scopes, because
they're not as sequential)
I think this would probably have prevented the missed include in #5469
-- it would've just failed completely with a "missing prelude"
diagnostic.
Also note this excludes the included IR from output, because it's
probably low-value to print.
Don't import `ImplWitnessTable` into the `constants` block, because we
generally don't put `Unique` constants there. This matches the handling
of the other kinds of `Unique` constants. In order to keep the
instruction visible in formatted SemIR, add it to the `imports` block
instead.
Also fix a bug in the instruction formatter that resulted in
instructions in the `imports` block being omitted from the output if
they were only referenced by earlier instructions in the `imports` block
and by instructions in the `constants` block. This was already resulting
in some referenced instructions being omitted from the output, but also
occurred frequently for `impl_witness_table` instructions after this
change because it is common for the only reference to those instructions
to be from `impl_witness` instructions in the `constants` block.
Adds an empty `min_prelude/destroy.carbon` in anticipation of turning it
into an interface. Update `no_prelude` tests to be `min_prelude` and
import it where needed; in some cases, modify the file to remove the
dependency (i.e., rewrite code to have nothing to destruct).
Right now, return_scope_stack is being used to determine whether logic
is in a function scope. However, we need to handle nested entities
inside function scopes. For example where this crashes right now:
```
base class C(B:! bool) {}
fn F() {
class B {
extend base: C(true or false);
}
}
```
This is doing a few things to make this kind of code not crash:
- Split `scope_stack().Push` into `PushForDeclName`, `PushForEntity`,
`PushForExpr`, and `PushForFunction` so that better decisions can be
made about behaviors.
- Hide `return_scope_stack` in the API, instead using interfaces to get
at the underlying data.
- Also using `PushForFunction` to update it similar to the other stacks
that `ScopeStack` manages.
- Add `IsInFunctionScope` as the best way to determine presence in
function scope.
- Remove `PeekIsLexicalScope` since destruction really wants function
scope information anyways.
- Clean up `destroy_id_stack` handling to be for function scopes rather
than lexical scopes.
- Return after related `context.TODO`s in a couple more spots, so that
code doesn't proceed to add control flow in spite of the lack of
support.
---------
Co-authored-by: Geoff Romer <gromer@google.com>
In preparation for shifting from `TypeId`s potentially representing
attached types to always representing unattached types, using
[terminology suggested on
Discord](https://discord.com/channels/655572317891461132/963846118964350976/1359286326779973712).
This change causes us to track slightly more type spelling information
through SemIR.
One change that has significant impact on the SemIR output is that we
now build a `struct_type` instruction in each class representing the
types of the fields, including the spelling used for those types. This
is now no longer always identical to the corresponding canonical
`struct_type` for the object representation, so it's built separately
and owned by the class.
Also remove `TypeBlock` support entirely, as its only use was
representing `TupleType`s, which now use an `InstBlock`.
Instead of using None, use an explicit ImplWitnessTablePlaceholder in
the witness table for entries that have not yet been populated, to aid
debugging. This would ensure they would show up very clearly in the
SemIR. This uncovered some `<invalid>` in the SemIR under erroneous
conditions that have now been turned into `<error>`.
Add the ImplWitnessAssociatedConstant instruction which wraps the
canonical instruction found from the constant value of the rewrite
constraint. This ensures that we have an instruction inside the eval
block for a generic impl declaration for each rewrite constraint's
value, which allows Subst to be performed to rewrite the symbolic
constant of the ImplWitnessAssociatedConstant instruction to associate
it with the generic. This will prevent the otherwise orphaned symbolic
constant of the rewrite's value from being used which can not have a
specific applied to them.
While applying the new insts in InitialFacetTypeImplWitness(), rearrange
the function to use less nesting. And avoid using entity names from
imported instructions (as we found is not effective in deduce.cpp) and
use a local instruction by going through the constant value.
This PR is part of the effort to allow a rewrite to name a generic
parameter, such as `impl forall [T:! type] T as Z where .X = T`, however
tests for this involve a final impl so that we can typecheck that the .X
value is a specific T, so the tests will come with that work. This piece
is split off because introducing new instructions causes a lot of SemIR
churn, and I wanted to get that done separately.
When converting to a facet there are three different failure modes:
1. You provided a non-type value. Only types can convert to facets. So
we tell you that we found a non-type value.
2. You provided a facet type (which has type TypeType) which does not
have witnesses for the the target facet's type. So we tell you that the
type `T` implements `X` but needs to implement `Y`.
2. You provided a (non-facet-type) concrete type (of type TypeType)
which does not implement the target facet's type (which is a FacetType).
So we tell you that we need the type to implement the FacetType but it
does not.
3. You provided a FacetAccessType (which is of type TypeType also, but
we special case this), whose underlying FacetType is not compatible with
the target facet's type. So we tell you that we need the type to
implement `X` but found a FacetAccessType `T` which implements `Y`.
Closes#5027
TODO to resolve whether it should conditionally say "object of"
depending on the category
---------
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
In order to have the name available for diagnostics, we now always set
`NameId` in `NameContext` and put `poisoning_loc_id` as part of the
union with `resolved_inst_id` instead (since we never need both).
Instead, produce a CARBON_FATAL error. Returning an Error constant from
the importer seems reasonable but turns out to not work well in
practice, because it violates the invariant that a constant value should
not have an error as an operand.
Also, don't produce an error constant for a valid ImportRefLoaded that
whose value is not constant; preserve the non-constant value instead.
High level, replacing `Id::Invalid` with `Id::None` and `Id::is_valid`
with `Id::has_value` for clarity, as discussed
[here](https://discord.com/channels/655572317891461132/655578254970716160/1331664574545395794).
The `IntId` refactoring is needed together with `AnyIdBase` because it's
also used with `ValueStore`.
Note, trying to be careful not to rewrite `EnumBase::InvalidIndex`, or
`is_valid` in general (e.g., `IdKind::is_valid`).
I've tried to sequence commits here:
1. Automatic replacements:
- `((?:Id|Index)(?: |::|\(|Base(?:\(|::)))Invalid((?:Index)?\W)` ->
`$1None$2`
- `<invalid>` -> `<none>`
- `InvalidNodeId` -> `NoneNodeId`
- `/\*invalid\*/` -> `/*none*/`
- `id((?:_|\(\))(?:\.|->))is_valid` -> `id$1has_value`
2. Manual edits:
- In `int.h` and `int_test.cpp`
- `IntT` has `is_value`, which I'm renaming to `is_embedded_value`.
- Manual edits to comments in this file.
- `AnyIdBase` and `IdBase`
- Declaration of `is_valid` -> `has_value`, `InvalidIndex` ->
`NoneIndex`.
- In `ids.h` and `ids.cpp`
- `is_valid` -> `has_value`
- `// An explicitly invalid ID.` -> `// An ID with no value.`; similar
for index
- Various math on `InvalidIndex` -> `NoneIndex`
- Various mentions of "valid" in comments
- In `value_store.h`, for `IdT::Invalid`, plus one comment
- In `impl.h` and `tokenized_buffer.h`, we had different initialization
of `::None` values (versus `ids.h` syntax) that I fixed manually.
- Spot checks to compile
- Particularly where `is_valid` replacements didn't catch spots due to
different naming.
3. Autoupdate tests
4. verbose.carbon (NOAUTOUPDATE)
5. Comment spot checks
Note there are probably other mentions of "Invalid" that should be swept
up, but I'd like to argue for merging and separating out remaining
cleanup since this is so sweeping (and likely to hit merge conflicts
from churn). We'll probably have lingering mentions of "invalid" for a
bit regardless, just because there are uses of "invalid" in non-Id APIs.
Changes the name of SemIR `import_ref`s to use the format
`<package>.<entity>`.
<table>
<tr><th>Before</th><th>After</th></tr>
<tr>
<td><code>%import_ref.05a: type</code></td>
<td><code>%Main.D: type</code></td>
</tr>
<tr>
<td><code>%import_ref.8f2: <witness></code></td>
<td><code>%Main.import_ref.8f2: <witness></code></td>
</tr>
</table>
* [Discord discussion in
#toolchain](https://discord.com/channels/655572317891461132/655578254970716160/1330253540999827577)
* Closes#4769
This removes some churn when adding new diagnostic cases to test files
(where previous to this change the newly added newline would cause the
previous diagnostic CHECKs to be updated including changes to the line
number because the CHECK for the blank line meant an extra line between
CHECK and source line).
A few alternatives discussed here:
https://discord.com/channels/655572317891461132/655578254970716160/1329573358475673723
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Add a Vtable typed inst with a type_id (of the type this vtable applies
to) and list of virtual function decls (or import refs to function
object constants).
This doesn't add lowering/emission of the vtable, or usage when
initializing objects of the type.
Some questions in case they're interesting to discuss:
* is it right/worth having the type_id in the vtable? (probably makes it
easier to emit - using the type to get the class name to figure out the
mangled name for the vtable) perhaps it should be a ClassId?
* I'm thinking the logic in CheckCompleteClassType could be the place we
handle diagnostics for mismatched keywords (virtual/abstract for a
function that's already virtual/abstract, maybe checking for non-virtual
functions with the same name in a base class, or derived class functions
without `impl`, etc) - but we could move some of that to the moment we
walk the function decl, and record our findings in the function decl
(record the base function it overrides, or the index of the vtable to
slot to use when building the vtable at the end of the class)
* the Vtable typed inst has `constant_kind = InstConstantKind::Always`
and `is_lowered = false`, I think I added that in to workaround/address
some failures in lowering. And seems correct for this intermediate step
- I'll add lowering in a follow-up patch. But the constant_kind - what
should this be? We can just say all vtables are of VtableType (in which
case the `Always` constant kind sounds right to me) or we could have
them introduce a type with each virtual function as a named member,
even?
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
When printing a Class, the complete_type_witness was printed last but
this gave a somewhat misleading representation as it appeared to be part
of the !members label. Move it above the label so that the label more
clearly refers to everything below it.
Include the index rather than the name in the fingerprint of a symbolic
binding. While both the index and the name contribute to the canonical
identity, using either one of them in the fingerprint is sufficient to
ensure that distinct entities get different fingerprints. Changing the
name of a symbolic binding should ideally not result in fingerprint
changes, so exclude the name from the fingerprint when we have an index.
Use the canonical type and constraint when fingerprinting an impl, so
that uses of names in `name_ref` instructions aren't considered, only
the entity the name resolves to, and different ways of spelling the same
type have the same fingerprint. This similarly allows compatible changes
to be made to impls without changing the fingerprint.
Exclude the declaration block when determining the fingerprint of a
declaration. The declaration block contains the declarations of
parameters of the declaration, which do affect whether two declarations
are identical, but not whether they denote the same entity, because it
would be invalid to have different declaration blocks for declarations
with the same name in the same scope. Therefore changes to the
declaration block are compatible, and it's useful for such changes to
not affect the fingerprint.
This is not easy to test in isolation with our current testing
machinery. However, a follow-on PR will change the name of a parameter
in the prelude, and with this in place, will not cause any changes to
occur elsewhere in the toolchain tests.
This change deliberately breaks away from the line/column ordering, and
instead focuses on a last byte offset corresponding to the final token
processed as part of producing the message. Where that's equal, this
maintains stable ordering in order to reflect the order that diagnostics
were produced.
The intent of this approach is that lex, parse, and check diagnostics
are interleaved based on where they are produced, but that
subexpressions still have diagnostics emitted prior to containing
expressions. In particular, the prior line/column sort essentially
sorted on the _start_ of where a diagnostic was associated, and this is
closer to sorting based on the _end_. As a consequence, something like
`F(1 2)` will have the error for `1 2` emitted _before_ a diagnostic for
`F(1 2)` not matching parameters, instead of _after_.
In check, we track the last handled node. This provides a
last_byte_offset _separate_ from where a diagnostic is associated. The
intent is that this creates an ordering of diagnostics which may be
associated with earlier code, to cause the diagnostics to be emitted
later. An example consequence of this is the change in ordering of
modifier diagnostics: we are diagnosing those from the same place, but
they have the same last_byte_offset, so we print them out in the order
produced.
I've added similar tracking to parse, but cannot identify any test which
is affected by it (note the separate commit, I thought about this late).
I'm not sure whether we have good out-of-order errors we could produce
for this.
A significant number of tests have reordered diagnostics as a
consequence of this change, so this change does not add further testing.