In `BuildUnaryOperator`, `GetOperatorOpFunction` is treated as
desugaring, but `PerformCompoundMemberAccess` and `PerformCall` are not.
This treats all of destruction as desugaring.
This leads to some instructions being elided, because of `GetOrAddInst`
behaviors:
> // If the instruction has a desugared location and a constant value,
returns
> // the constant value's instruction ID. Otherwise, same as AddInst.
This changes instructions that previously had a non-desugared location
to instead have a desugared location, so if they also have a constant
value then the constant value can be used directly.
This just catches uses equivalent to `return;` and `return <expr>;`.
Note it's just extending the current implicit return logic, not really
adding much unique here.
I'm still delaying break and continue because those require partial
destruction, which is more work and I want to be careful to get it
right.
This changes `Destroy` to use an interface for its implementation.
Note that this change includes a lot of test updates. Even when
`Destroy` is a no-op, it still causes code generation as part of
determining that.
Originally I was trying to use ranges to cut down the scope of this, and
to a degree I think they have. But a flipside here is that cases where
no destructors should be generated -- particularly globals -- would be
needed to completely remove destructor calls. Even for ranges, the range
can often include the destructor placement. So I've shifted
frame-of-thought a little: accept a bunch of destructor churn, because
destructors are needed and will be prevalent. The verbosity is a feature
of the design to make desugaring apparent in IR, not a bug.
This drops file_test runtime from about 3s to 2.5s on my machine, which
is now ~30% faster than before #5653 slowed things down by adding a lot
of stuff to the production prelude.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Replace the binary `Operation` interfaces with the `OperationWith(T:!
type)` interfaces described in the design, and add a `Result` associated
type for both unary and binary operations. Update the `impl`s in the
prelude for integer types to use the new form, including supporting
implicit conversion of either operand.
I've tried to split this PR up into commits focused on distinct changes
for review convenience. It may be simplest to review it one commit at a
time.
The `BitAnd` operation combines two `FacetTypeInfo` structures by
concatenating their lists, but did not apply the current specific to the
instructions in the `FacetTypeInfo` as it forgot to go through
`GetContantFacetTypeInfo`.
`WhereExpr` handling duplicates a lot of the logic in
`GetConstantFacetTypeInfo` by calling `GetConstantValue` on things,
instead of calling `GetConstantFacetTypeInfo` on the `FacetTypeInfo` it
constructs. This meant it also needed to call `GetConstantFacetTypeInfo`
on the base facet type, and on any `impls`-requirement facet types
before merging their values together into a single `FacetTypeInfo`.
Instead, make `WhereExpr` more like `BitAnd`, and have it concatenate
things together as-is to construct a `FacetTypeInfo`. Then call
`GetConstantFacetTypeInfo` to canonicalize it and return a constant
value referring to it.
In `GetConstantFacetTypeInfo` we fix a crasher by propagating errors
inserted into the `FacetTypeInfo` out to the `Phase` so that the
resulting instruction depending on the `FacetTypeInfo` is not resolved
to a constant value with errors inside it. A test is added for this,
which was crashing on import of the `FacetType` with an error within
from the imported `impl` decl.
This refactoring gives us three benefits:
* There's now only a single place that does
`ResolveRewriteConstraintsAndCanonicalize`, which is inside
`GetConstantFacetTypeInfo`. This makes the inputs/behaviour of
`ResolveRewriteConstraintsAndCanonicalize` more consistent.
* There's now only a single place that updates the instructions in
`FacetTypeInfo` constraints with new constant values, so that changes
that rely on observing and interacting with that code only need to be
written in a single place. This will avoid duplicating logic in
https://github.com/carbon-language/carbon-lang/pull/5644.
* This will make it easier to move `WhereExpr` handling to a
`EvalConstantInst` function, as it no longer directly depends on
`GetConstantValue()` from `eval.cpp`.
Now that included files can specify `EXTRA-ARGS`, this uses that to
handle min_prelude files. Also moves `As`/`ImplicitAs` out to a shared
file, partly because we duplicate it a few times over, partly just to
show that it works.
Also removes the `min_prelude/` subdirectories because many of these
files were touched by autoupdate regardless. I noticed one conflict for
`impl_thunk.carbon`, so renaming that one to
`impl_thunk_min_prelude.carbon`.
`GetArgReplacements` I simply noticed was unused, so removing it.
The former signature unintentionally allowed any parameter and result
types, because it only checked that the type of the type was `type`,
which is tautological (for non-error values). Also add missing tests for
the builtin.
People seemed receptive [on
#toolchain](https://discord.com/channels/655572317891461132/655578254970716160/1379196447827689553),
so proceeding.
For the two name conflicts, I've set it up so that there's a
"foo.carbon" and "foo_with_prelude.carbon", to indicate that the
no-prelude approach is preferred (with a shorter name).
Note min_prelude will require a little more work/thought, I want to
avoid adding `--custom-core` etc.
Previously we walked the global variables defined by the current file
and emitted an LLVM global variable definition for each of them. Now
instead, when emitting a constant reference to a global variable, we
emit an LLVM global variable declaration, and we then subsequently walk
the global variables defined by the current file and convert each of
them from a declaration to a definition.
In order to make import of names of global variables work, add support
for import of `var`, as well as support for importing `tuple_access` and
`tuple_pattern` in the case where the `var` has a tuple pattern in its
declaration. Also treat `bind_name`s that are reference bindings to
`var`s as having the same constant reference value as their `var` so
that we can properly import and lower them.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Co-authored-by: Carbon Infra Bot <carbon-external-infra@google.com>
Where `--no-dump-sem-ir` is used, change to `--dump-sem-ir-ranges=only`.
Otherwise, add `--dump-sem-ir-ranges=if-present` with a TODO to change
to `only`.
Note, SemIR is affected just because the extra comments change line
numbers in files where splits aren't in use.
Outside of `match_first` this adds diagnostics for invalid non-final and
final `impl` declarations in line with those being proposed in
https://github.com/carbon-language/carbon-lang/pull/5337.
- Two non-final `impl`s with the exact same type structure is invalid.
- A `final impl` that matches the self/constraint of another `impl` as a
query would always be preferred, making the second one invalid.
- Two `final impl`s that overlap (have compatible type structures) in
different files is invalid.
- Two `final impl`s that overlap (have compatible type structures) in
the same file is invalid outside of `match_first`.
- A `final impl` in a different file from its root self type and
interface is invalid.
We add tests for all these scenarios as well as correct scenarios.
The "compatible" test for two type structures was being done
symmetrically, which is incorrect. We want it to test that a query type
structure is the same _or more specific_ in a compatible way with an
impl's type structure. This is corrected in the implementation, and the
diagnostics now have to test both directions to get the desired output,
as expected.
---------
Co-authored-by: josh11b <15258583+josh11b@users.noreply.github.com>
- Track the `VarPattern` instruction on the `VarStorage` instruction so
that it's available for name mangling.
- Mangle global variables based on the first binding name within their
pattern.
- Give global variables external rather than internal linkage, except if
they have no bindings whatsoever in their pattern.
- To support lowering references to bindings nested within a global var,
such as for `var (x: i32, b: i32)`, add some basic initial support for
reference constant expressions. Treat a global `var` as a reference
constant, and treat an aggregate access into a reference constant as a
reference constant.
When a `LookupImplWitness` instruction is created in a generic function
for a witness obtained from a `BindSymbolicName`, it stores the
`BindSymbolicName` as the query self type along with the interface it
obtained from it.
Later, when an argument is substituted into the `LookupImplWitness` in
deduction, and it is re-evaluated, the `BindSymbolicName` in the query
interface's specific arguments was being substituted, but the same
`BindSymbolicName` in the query self type was not. This was because we
did not substitute into the type of `BindSymbolicName`. In this case the
type is a `FacetType` which has inside it one or more specific
interfaces. The same substitution needs to be applied to both the
interfaces in the self type as to the interfaces in the query.
This issue was found by a fuzzer - though in a weirder and more invalid
way, by putting all of the code for our test case inside an `interface`,
which creates an implicit generic `Self` in the enclosing context and
yet makes it concrete inside a function body.
A fuzzer found that converting a pointer to a `FunctionTypeWithSelfType`
to `type` does an impl lookup and ends up in TypeIterator with the
`FunctionTypeWithSelfType` being iterated over in the self type, where
we crash. It's a valid type, so the iterator should be able to walk over
and return it.
We also constructed a similar example for `FunctionType`.
I think this would probably have prevented the missed include in #5469
-- it would've just failed completely with a "missing prelude"
diagnostic.
Also note this excludes the included IR from output, because it's
probably low-value to print.
We were importing all impls as non-final, since we forgot to set the new
field when constructing the imported Impl. Adds a test that fails before
this PR, since the imported Impl is treated as non-final.
Such impls will never be used, so they should not exist. And test that a
final impl partially overlapping a non-final impl is accepted.
There is a question about a final impl partially overlapping a final
impl that is part of
https://github.com/carbon-language/carbon-lang/pull/5337
The TypeStructureBuilder recursively iterates through a type, interface,
or facet value and constructs a type structure that includes each
concrete and symbolic value found. This iteration is a more general
thing that can be useful elsewhere. For instance, to get just the root
type out of a general type, it is the result of the first iteration
step.
We abstract out the iteration logic into a SemIR::TypeIterator to create
a clear boundary between the work of iterating and the work of building
the TypeStructure from it.
Along the way this pointed out some issues in the TypeStructureBuilder
where it could have ambiguity between types that include non-type
values. So we add some tests for these cases, and they now pass. There
are also TODOs left behind, as concrete TypeStructure is overly specific
right now in order to keep these tests passing, which means that the
concrete elements can't be used for impl lookup matching yet. Only the
shape of concrete vs symbolic is used for now, and then type deduction
is used to compare the actual concrete types, which could be skipped
when the concrete values could be compared directly and reject an impl
for not matching.
When two non-final impls have the same type structure (neither is a
specialization of the other), it is an error unless they are within a
`match_first` block. For now, we don't have `match_first` implemented,
so it's always an error.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
A final impl must be written in the same file as the root self type or
the interface. This provides tests that should fail but don't yet for
writing a final impl in a third file that defines neither, as well as a
blanket final impl over an interface outside the file that defines the
interface.
Instead of building an eval block as a separate pass at the end of a
generic, build the eval block incrementally.
The larger change here is that asking for the type or constant value of
an instruction now always returns an unattached type or constant value,
in order to preserve the behavior that we previously achieved by doing
the rewrite to attached types and constant values at the end of handling
the generic.
This also incidentally fixes some subtle issues where attached types and
constant values would leak out into check and cause it to get confused
about differences between attached and unattached values. Check should
no longer see attached values except where it explicitly asks for them.
---------
Co-authored-by: Dana Jansens <danakj@orodu.net>
Don't import `ImplWitnessTable` into the `constants` block, because we
generally don't put `Unique` constants there. This matches the handling
of the other kinds of `Unique` constants. In order to keep the
instruction visible in formatted SemIR, add it to the `imports` block
instead.
Also fix a bug in the instruction formatter that resulted in
instructions in the `imports` block being omitted from the output if
they were only referenced by earlier instructions in the `imports` block
and by instructions in the `constants` block. This was already resulting
in some referenced instructions being omitted from the output, but also
occurred frequently for `impl_witness_table` instructions after this
change because it is common for the only reference to those instructions
to be from `impl_witness` instructions in the `constants` block.
Once a concrete result has been found, it's not legal to write an `impl`
that would change the concrete result afterward.
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
This was originally needed to support constant evaluation of name
expressions, but that's now done in a different way.
This is actually a step toward treating all patterns as constants. The
upcoming change will do so in a slightly different way, and so it will
simplify the review to start from a baseline where patterns are never
constant.
Adds an empty `min_prelude/destroy.carbon` in anticipation of turning it
into an interface. Update `no_prelude` tests to be `min_prelude` and
import it where needed; in some cases, modify the file to remove the
dependency (i.e., rewrite code to have nothing to destruct).
We eliminate the `FacetAccessWitness` instruction, which would sometimes
immediately evaluate to a concrete `ImplWitness`, and sometimes remain
symbolic. This instruction is now replaced by `LookupImplWitness` in all
cases. To support the same use cases, when it is evaluated,
`LookupImplWitness` will look in the self value if it's a facet value,
and attempt to return a concrete `ImplWitness` from it before looking
for an `impl` statement.
The `LookupImplWitness` instruction's value is now canonical, even when
it evaluates to a symbolic `LookupImplWitness` instruction, by
canonicalizing the self value of the lookup query. This canonicalization
unwraps `FacetAccessType` and `FacetValue` instructions to get to an
underlying canonical facet value. However we must preserve and use the
non-canonical query while evaluating the instruction in order to look
for a concrete `ImplWitness` if the query self value was a concrete
`FacetValue`. The canonicalization ensures that symbolic witnesses
obtained from a facet value are compatible with those obtained from an
impl statement, as long as the self types originate from the same
canonical facet value though they may have been narrowed.
Member access now unconditionally does a `LookupImplWitness()`
operation, instead of only sometimes doing the lookup for a final impl
declaration.
`EvalImplLookupResult` is marked `[[nodiscard]]` so that we don't
construct it and forget to return it. This was a mistake made at one
point during the creation of this PR. And the `has_concrete_value()`
method no longer has a precondition that `has_value()` is true, since we
want to look for a concrete result only in the new use of
`EvalImplLookupResult` returned from lookup into the query self facet
value.
The TODO from `FacetAccessWitness` evaluation is addressed by ensuring
the index of the witness in the `FacetValue` comes from the required
interfaces of the `FacetValue`'s type, and that the type (a `FacetType`)
is the same facet type used in the query to construct the `FacetValue`'s
witness block. This is made possible by eliminating the
`FacetAccessWitness` indirection. The lookup into a `FacetValue` happens
while evaluating `LookupImplWitness` and it does so directly on the self
value. This gives a consistent view of the witness set and the facet
type, as they both come from the same instruction.
All of this with 400 less lines of code. :)
---------
Co-authored-by: josh11b <15258583+josh11b@users.noreply.github.com>
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
A `MetaInstId` is intended to represent a handle to an instruction in a
generic as an operand to a template action; substituting into the action
should not substitute into the referenced instruction.
Fixing this exposed a bug in `GetOrAddInst` where it would return an
`InstId` of an unattached symbolic constant in some cases, rather than
the `InstId` of an instruction that has the relevant (attached) constant
value. That's fixed for now by turning off the `GetOrAddInst`
optimization in that case, but in future we can refine this by adding
the instruction to the eval block for the generic only, and not to the
body of the generic.
This allows us to import the table for a given impl only once, while we
can import many ImplWitness instructions with different specifics for a
generic impl.
For example in convert_facet_value_to_narrowed_facet_type.carbon we see
that a single witness table is imported for the BitAnd interface, with
multiple witnesses (for different specifics) imported and sharing the
same table.
The ImplWitnessTable now contains a back-link to the Impl the witness is
for, allowing inst namer to name that interface in the textual semir,
and allowing the interface to be found when debugging from a witness.
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
In preparation for shifting from `TypeId`s potentially representing
attached types to always representing unattached types, using
[terminology suggested on
Discord](https://discord.com/channels/655572317891461132/963846118964350976/1359286326779973712).
This change causes us to track slightly more type spelling information
through SemIR.
One change that has significant impact on the SemIR output is that we
now build a `struct_type` instruction in each class representing the
types of the fields, including the spelling used for those types. This
is now no longer always identical to the corresponding canonical
`struct_type` for the object representation, so it's built separately
and owned by the class.
Also remove `TypeBlock` support entirely, as its only use was
representing `TupleType`s, which now use an `InstBlock`.
While facets may come with a rewrite for an associated constant, they
are symbolic. A final impl has the ability to provide a concrete value
instead, which allows generic code to use the concrete value in place of
the associated constant's (fully qualified) name.
For instance, instead of `I.Type`, the concrete type `()` can be used if
there is an `impl final [T:! type] T as I where .Type = ()` impl.
This does not yet cache the result of the lookups.
Depends on https://github.com/carbon-language/carbon-lang/pull/5255
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
This gives a slightly simpler representation for `UnboundElementType`s
in eval blocks, and in principle allows us to preserve the spelling of a
field's type into the `UnboundElementType` and thereby into a field
reference, although as of right now this doesn't affect our diagnostic
output in any way.
During error recovery for a field with a non-concrete type, preserve the
type in the `UnboundElementType` regardless. It's not really problematic
to have a non-concrete type there, and this makes it easier to track the
instruction used to specify the type.
This is a step towards switching symbolic types to always be abstract
during type checking.
Instead of using None, use an explicit ImplWitnessTablePlaceholder in
the witness table for entries that have not yet been populated, to aid
debugging. This would ensure they would show up very clearly in the
SemIR. This uncovered some `<invalid>` in the SemIR under erroneous
conditions that have now been turned into `<error>`.
Add the ImplWitnessAssociatedConstant instruction which wraps the
canonical instruction found from the constant value of the rewrite
constraint. This ensures that we have an instruction inside the eval
block for a generic impl declaration for each rewrite constraint's
value, which allows Subst to be performed to rewrite the symbolic
constant of the ImplWitnessAssociatedConstant instruction to associate
it with the generic. This will prevent the otherwise orphaned symbolic
constant of the rewrite's value from being used which can not have a
specific applied to them.
While applying the new insts in InitialFacetTypeImplWitness(), rearrange
the function to use less nesting. And avoid using entity names from
imported instructions (as we found is not effective in deduce.cpp) and
use a local instruction by going through the constant value.
This PR is part of the effort to allow a rewrite to name a generic
parameter, such as `impl forall [T:! type] T as Z where .X = T`, however
tests for this involve a final impl so that we can typecheck that the .X
value is a specific T, so the tests will come with that work. This piece
is split off because introducing new instructions causes a lot of SemIR
churn, and I wanted to get that done separately.
For each kind of instruction, specify whether its constant evaluation
needs an `InstId` or not. If it does, ensure that all constant
evaluation of that instruction provides one. Otherwise, allow calling
into the evaluator without providing an `InstId`.
This allows us to reliably use the `InstId` in evaluation steps that
either need a location or need to look at the original operands of the
instruction prior to evaluation, and also to support `TryEvalInst` calls
safely for instructions whose evaluation does not need an `InstId`.