This allows us to import the table for a given impl only once, while we
can import many ImplWitness instructions with different specifics for a
generic impl.
For example in convert_facet_value_to_narrowed_facet_type.carbon we see
that a single witness table is imported for the BitAnd interface, with
multiple witnesses (for different specifics) imported and sharing the
same table.
The ImplWitnessTable now contains a back-link to the Impl the witness is
for, allowing inst namer to name that interface in the textual semir,
and allowing the interface to be found when debugging from a witness.
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
In preparation for shifting from `TypeId`s potentially representing
attached types to always representing unattached types, using
[terminology suggested on
Discord](https://discord.com/channels/655572317891461132/963846118964350976/1359286326779973712).
This change causes us to track slightly more type spelling information
through SemIR.
One change that has significant impact on the SemIR output is that we
now build a `struct_type` instruction in each class representing the
types of the fields, including the spelling used for those types. This
is now no longer always identical to the corresponding canonical
`struct_type` for the object representation, so it's built separately
and owned by the class.
Also remove `TypeBlock` support entirely, as its only use was
representing `TupleType`s, which now use an `InstBlock`.
Use that instead of `AddInstInNoBlock` to get the value of an
instruction when evaluation might depend on the `InstId` but only the
`ConstantId` of the instruction is desired by the consumer.
Instead of using None, use an explicit ImplWitnessTablePlaceholder in
the witness table for entries that have not yet been populated, to aid
debugging. This would ensure they would show up very clearly in the
SemIR. This uncovered some `<invalid>` in the SemIR under erroneous
conditions that have now been turned into `<error>`.
Add the ImplWitnessAssociatedConstant instruction which wraps the
canonical instruction found from the constant value of the rewrite
constraint. This ensures that we have an instruction inside the eval
block for a generic impl declaration for each rewrite constraint's
value, which allows Subst to be performed to rewrite the symbolic
constant of the ImplWitnessAssociatedConstant instruction to associate
it with the generic. This will prevent the otherwise orphaned symbolic
constant of the rewrite's value from being used which can not have a
specific applied to them.
While applying the new insts in InitialFacetTypeImplWitness(), rearrange
the function to use less nesting. And avoid using entity names from
imported instructions (as we found is not effective in deduce.cpp) and
use a local instruction by going through the constant value.
This PR is part of the effort to allow a rewrite to name a generic
parameter, such as `impl forall [T:! type] T as Z where .X = T`, however
tests for this involve a final impl so that we can typecheck that the .X
value is a specific T, so the tests will come with that work. This piece
is split off because introducing new instructions causes a lot of SemIR
churn, and I wanted to get that done separately.
For each kind of instruction, specify whether its constant evaluation
needs an `InstId` or not. If it does, ensure that all constant
evaluation of that instruction provides one. Otherwise, allow calling
into the evaluator without providing an `InstId`.
This allows us to reliably use the `InstId` in evaluation steps that
either need a location or need to look at the original operands of the
instruction prior to evaluation, and also to support `TryEvalInst` calls
safely for instructions whose evaluation does not need an `InstId`.
Instead of storing a `TypeId` that always refer to a facet type that
always contains exactly a single interface, store the interface
directly.
Also improve stringification of `LookupImplWitness` and witness access
into it, switching to using newly-added functionality for stringifying
specific interfaces.
Each of these types takes another type as an operand. Instead of storing
that other type as a `TypeId`, store it as an `InstId` so that we can
track how it was written, not only its canonical form.
The canonical constant values of these types continue to store the
canonical constant values of their operands, as normal.
---------
Co-authored-by: Dana Jansens <danakj@orodu.net>
Factor out logic to evaluate `EntityNameId` instead of duplicating it
between `BindSymbolicName` and `SymbolicBindingPattern`. Remove support
in `SymbolicBindingPattern` for evaluating a pattern to the constant
value of the corresponding binding, which doesn't really make any sense
given that patterns don't generally evaluate to the value that they
matched.
This results in the handling for `SymbolicBindingPattern` being simply
the default handling for an always-constant instruction, so remove the
special case for it entirely and change its constant kind to `Always`.
It's not entirely clear that it makes sense for `SymbolicBindingPattern`
to be treated as a constant when other patterns aren't, but we seem to
be relying on this in various places, so leave it as a constant for now.
Changing it to never be constant will be a smaller change now -- it just
requires changing the `constant_kind`.
The IR changes in the tests are fairly widespread, but mechanical, and
there are two kinds of things changing:
- `symbolic_binding_pattern`s in specifics now evaluate to
`symbolic_binding_pattern`s, not to the argument values. This means in a
few cases we end up with additional `symbolic_binding_pattern`
constants.
- We evaluate the type operand of `symbolic_binding_pattern` now, so an
error in the type will now properly be propagated into an error in the
pattern's constant value.
The instruction does act somewhat like a witness, saying that an impl
does exist for a lookup, but the instruction more concretely represents
an impl lookup - since that is done when it is evaluated.
Add a new instruction called ImplSymbolicWitness which represents a
search for an impl declaration given a self type and an interface to
find implemented for the self type. The self type is stored as a
constant instruction id, rather than as a ConstantId, as instructions
don't currently support holding ConstantId. The interface is stored as a
SpecificInterface but we can't fit all of it directly into the
instruction. So we add a new id to refer to the SpecificInterface as
follows.
Add a new SpecificInterfaceId which indexes into a canonical value store
on SemIR::File. This tracks all `SpecificInterface`s stored in an
instruction - specifically the ImplSymbolicWitness instruction.
The SpecificInterface on Impl is still stored there as a value, not as
an id, and no id is eagerly constructed for it. We wait until an id is
needed to make one. Since they are canonical, a new id is only create
when a new SpecificInterface value is seen.
When doing impl lookup, and the query is not concrete, and the impl is
not effectively final, the query needs to consider future impls that may
specialize either the self type or the constaint to make a more precise
match and replace the found impl declaration. Instead of returning the
ImplWitness instruction from the found impl, we generate a
ImplSymbolicWitness instruction, storing the query so that it can be
replayed later. This instruction is added to the generic eval block and
thus will be re-evaluated later with a SpecificId that may make the
query more concrete. When evaluating the instruction and replaying the
query, the lookup has the same conditions and if it does not decide to
use the found impl concretely, then the same instruction is returned
from eval, leaving it as symbolic.
--- Impl lookup changes ---
Impl lookup gets a little more interesting now. It continues to look in
the facet value for a witness if the self type is a facet value. Then
falls back to looking for an impl declaration. This step is no longer
done directly. Instead, we construct a ImplSymbolicWitness instruction
and evaluate it immediately for each interface that are in the query
facet type.
The ImplSymbolicWitness instruction, when evaluated, calls back to the
impl lookup code, with a query specific interface. There we resume back
into the same code path as from before, finding a witness in an impl
declaration. But we may return "found a non-final impl" instead of a
concrete witness. If eval receives this back, it evaluates to the
current ImplSymbolicWitness instruction as the resulting constant value.
To pass lookup failures back through eval, a result of InstId::None from
the second step of impl lookup will result in a non-constant value,
which is used as a signal back up the stack to the original impl lookup
function that the lookup failed. Using a non-constant value here would
break evaluation of the generic eval block if impl lookup could fail
there, however we know it will not since we only leave behind an
ImplSymbolicWitness instruction in the eval block if we found at least
one matching impl already, and we just want to look for a better match
with a more specific query.
We must take care to not store a reference into any value store across
computation in impl lookup, since impl lookup can recurse into itself
invalidate those stores. That includes the SpecificInterface obtained
from a SpecificInterfaceId, which impl lookup also inserts into the
store.
--- The long tail ---
Adding a new instruction and a new id type requires a myriad of changes
to support them:
We add Dump() support for SpecificInterfaceId. And fix a crash in Dump
for SpecificId::None. We also add MakeSpecificInterfaceId() for dumping
arbitrary ids.
The type of ImplSymbolicWitness is a new singleton builtin type
instruction called WitnessSymbolicType (like WitnessType is the type for
an ImplWitness).
Both ImplSymbolicWitness and WitnessSymbolicType are given `Value` as
their expression category as they are builtin constant values. And
BuildInfo() in TypeCompleter is taught about them both, returning a
`ValueRepr::Copy`.
WitnessSymbolicType is added to the set of SingletonInstKinds, so that
it can have a singleton instrution id as a static member.
Lower's BuildTypeForInst() is taught to make an empty struct for
WitnessSymbolicType, similar to WitnessType.
Instruction formatter (FormatterImpl) grows support for printing a
SpecificInterfaceId so that it can print both arguments of
ImplSymbolicWitness on the RHS when printing the SemIR instruction. To
print a SpecificInterfaceId, it prints both the interface id and the
specific id (if there is one). For example, for a query on a generic
interface `Z` with one parameter, the RHS includes the query, interface,
and specific:
```
%Z.impl_symbolic_witness: <symbolic witness> = impl_symbolic_witness %U, @Z, @Z(%U.as_type) [symbolic]
```
IdKind is extended to include SpecificInterfaceId.
InstFingerprinter is taught to look through SpecificInterfaceId and use
the interface and specific ids in the fingerprint.
InstNamer is taught about SpecificInterfaceId, counting the interfaces
when building an index. It is also tought about ImplSymbolicWitness,
using the name of the interface within and the `.impl_symbolic_witness`
suffix. For example, here the LHS is named after the interface in the
query:
```
%Z.impl_symbolic_witness: <symbolic witness> = impl_symbolic_witness %U, @Z, @Z(%U.as_type) [symbolic]
```
StringifyTypeExpr is taught about WitnessSymbolicType, which uses its IR
name since it's a singleton. And about ImplSymbolicWitness which uses
its constant value. The handling of ImplWitnessAccess also needed to be
adjusted, since it assumed that ImplWitnessAccess::witness_id would
always be a FacetAccessWitness, but it can now also be an
ImplSymbolicWitness. (It seems that the witness_id is also assigned
ImplWitness instructions, but those ImplWitnessAccess instructions don't
ever seem to get stringified in a diagnostic at this time.) At the
moment the ImplWitnessAccess with a symbolic witness is just stringified
as "<symbolic>", such as in:
```
x.carbon:1:2: error: cannot implicitly convert value of type `()` to `<symbolic>` [ConversionFailure]
let a: C(D).(Z.X) = ();
^~
```
There is a TODO left behind to include more information there.
The TypeStructure builder is made to handle WitnessSymbolicType and
WitnessType. These come up now in deduce where a generic impl will have
a ImplSymbolicWitness in a FacetValue for a generic self type. The query
may have a concrete ImplWitness in the same position. Since deduce tries
to deduce through the FacetValue, it tries to convert ImplWitness to
ImplSymbolicWitness, tries to do an impl lookup for `impl ImplWitness as
ImplicitAs(ImplSymbolicWitness)` and causes us to build type structures
with each of these.
Subst is updated to handle pushing and popping SpecificInterfaceId.
Without this, when finishing a generic's eval block, we would walk into
the ImplSymbolicWitness instruction, and its arguments, and fail to
recurse down into the SpecificInterfaceId. Then any specifics inside
would be left as "orphaned" without any generic id attached to them, and
we would never update the instructions in the SpecificInterface's
instructions (inside its own SpecificId) with new constant values when
evaluating the generic eval block against a specific. To do this we push
the specific_id inside the SpecificInterface, and when popping we pop
the specific_id then construct a new canonical SpecificInterface with it
and return that id.
We add support for importing ImplSymbolicWitness by importing its self
constant instruction and specific interface id. However we also had to
add import support for SpecificImplFunction, which can now appear in the
generic eval block for a generic impl declaration, and thus must be
imported with the declaration. This is done very similarly to
SpecificFunction, except the `type_id` is a singleton value.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
When transforming instructions with symbolic constant values into the
eval block, we previously special-cased `bind_symbolic_name` (and
`symbolic_binding_pattern`) because they are places where symbolicness
is introduced, rather than propagated from operands, and just copied
them into the eval block. However, `bind_symbolic_name` can be dependent
on other symbolic constants, because it can have a type that is
dependent. In this case, the copy in the eval block would not have its
type properly adjusted to refer to the type within the eval block.
Fix this by performing substitution into `bind_symbolic_name` rather
than copying it directly, and instead, detect cases where substitution
determined that the instruction was unchanged despite having a symbolic
constant value, and force it to be rebuilt in that case.
I've not found any way that the previous behavior actually caused
problems, or affected the observable behavior of the toolchain. The type
of these instructions in the eval block doesn't make much difference to
anything because they get immediately replaced by their corresponding
argument values when we run the eval block. But this came up and caused
some test output churn when I was making a different change, and it
seems like a fix to our representation even if it's not changing
behavior, so I'm splitting it out so it can be handled separately.
When a generic function declaration was encountered for the second or
more time, we would FinishGenericRedecl() for the function decl, but
this just popped the generic region stack and moved on.
The issue with that is when the stack entry is gone, we lose the
symbolic constants from that declaration, and are unable to rewrite them
to point to the actual generic. This left us with a function declaration
with abstract symbolic values that were not useful, and in a function
call we use the declaration attached to the definition, which would be a
declaration with broken symbolic values. Then the function would be
uncallable since deduce would be unable to determine argument types
without the generic bindings.
This resolves the issue for functions, as well as ensuring the correct
generic id from a previous declaration is used for other generic entity
types that have redeclarations.
When a function declaration is qualified, such as defining a class
method outside the class body, we need only the function declaration to
contribute to its generic region stack. The code was collecting constant
values from all qualifier segments together incorrectly.
So when we PushNameQualifierScope(), we also drop the current generic
region stack and rewrite its constant values by calling
FinishGenericRedecl(), and open a new stack entry for the next part of
the qualified declaration.
If a generic declaration somehow has more dependent instruction than a
previous declaration, it would add new instructions to its eval block
with indices beyond the elements in the actual declaration eval block,
since we only store the block from the first declaration found. To avoid
this we plumb through that we are in a redeclaration, and terminate with
an ICE instead of adding new instructions to crash on later.
Fixes#5136.
When the parameter is a deduced symbolic FacetValue, refering to a
BindSymbolicName, and the argument is a concrete FacetValue that would
match the FacetType requirements on the BindSymbolicName's type, we
currently do not deduce that the argument matches the parameter.
The argument is not _converted_ to the parameter type because they are
both FacetValues of the same FacetType type. However they are also not
equal constant values so the argument is not saved as a deduced match
for the parameter.
In order to accept the FacetValue, we need to consider them as
`deduce_through`, which attempts to deduce each of the fields in the
argument FacetValue against the fields in the parameter FacetValue.
This deduces that the argument's concrete type matches the symbolic
BindSymbolicName and its witnesses are the same.
Since the parameter is a FacetValue, its argument is not the type that
needs to be recorded as the deduced type for the binding. The
BindSymbolicName inside the parameter is the place that we need to find
the deduced type for the binding. So simply walking into the FacetValue
gets us to that position, where we eventually record the deduced
argument type as being the concrete type from the original argument
FacetValue.
Similarly, when determining what interfaces are satisfied by a
FacetValue for deduce, we want to use the full type available in the
FacetValue rather than just those from its FacetType. Determining
availability of interfaces here is equivalent to converting, and we want
converting a FacetValue to always work on the full available type info.
Only API access (member lookup) is restricted by a FacetValue to the
interfaces provided by its FacetType type.
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
When performing a call through an impl witness, the callee that we
type-check against is the function in the interface, so we form a
specific for that callee. However, once the impl witness access
resolves, the eventual callee is a different function -- the function in
the impl -- so this would cause us to form a `SpecificFunction` where
the callee is one function but the specific refers to a different
function.
Address this by adding another instruction, `SpecificImplFunction`, that
takes a function in an impl and a specific for the corresponding
function in the interface, and computes and returns a `SpecificFunction`
referring to the corresponding specific function in the impl, or returns
a direct reference to the function in the `impl` if it's not a generic
function.
This changes the SemIR of invalid redeclarations, because previously
they lacked a name. We've avoided this in diagnostics so it doesn't
otherwise come up, but I plan to use it for more easily validating
redeclarations.
Currently this test fails with trying to access a comptime function with
runtime values:
```
fn F() {
let a: J = {} as J;
let b: J = {} as J;
// CHECK:STDERR: fail_bit_and_values_no_impl.carbon:[[@LINE+7]]:3: error: non-constant call to compile-time-only function [NonConstantCallToCompTimeOnlyFunction]
// CHECK:STDERR: a & b;
// CHECK:STDERR: ^~~~~
// CHECK:STDERR: core/prelude/operators/bitwise.carbon:96:3: note: compile-time-only function declared here [CompTimeOnlyFunctionHere]
// CHECK:STDERR: fn Op[self: Self](other: Self) -> Self = "type.and";
// CHECK:STDERR: ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
// CHECK:STDERR:
a & b;
}
```
The issue is that the BitAnd impl for facet types is matching on any
value of any type:
```
impl forall [T:! type] T as BitAnd
```
What we really want is for it to match on facet types (which are type
values), which is written as:
```
impl type as BitAnd
```
After this change, the error makes more sense in the above test:
```
fn F() {
let a: J = {} as J;
let b: J = {} as J;
// CHECK:STDERR: fail_bit_and_values_no_impl.carbon:[[@LINE+4]]:3: error: cannot access member of interface `Core.BitAnd` in type `J` that does not implement that interface [MissingImplInMemberAccess]
// CHECK:STDERR: a & b;
// CHECK:STDERR: ^~~~~
// CHECK:STDERR:
a & b;
}
```
When deduction has to substitute binding parameters into further generic
parameters, we do conversion of the argument to the substituted type.
Then we replace the argument instruction id with that Converted
instruction. This causes a redundant specific to be created for the
Converted instruction which is not needed. What we want is the specific
for its constant value.
So when we replace the argument instruction id, replace it with the
instruction from the constant value of the converted argument.
This was raised in [discord
#toolchain](https://discord.com/channels/655572317891461132/655578254970716160/1349067541070217306).
A query facet type may contain multiple required interfaces, in which
case impl lookup should return an ImplWitness for an impl that is used
for each interface in the query. We bundle these together into an
instruction block and return that from impl lookup. The witnesses are in
the same order as the interfaces in the
`CompleteFacetType::required_interfaces`. This allows walking the
`required_interfaces` to find an interface to give an index that can
also be used to grab a witness from this set, or from FacetValue.
FacetValue now has an InstBlockId for the set of witnesses of the
FacetType, instead of a single ImplWitness instruction id.
FacetAccessWitness includes the index of the witness (determined from
the position in `required_interfaces`) of the witness it's accessing
from the FacetType.
The
toolchain/check/testdata/facet/no_prelude/fail_todo_call_combined_impl_witness.carbon
test demonstrates the fix in the resulting SemIR. We can see the calls
to methods on a multi-interface FacetType result in a FacetAccessWitness
with an index of the correct interface, and this results in a witness
that leads to the correct impl's function.
There is a TODO in member access, where it does not have a
`CompleteFacetType` yet, so it uses the index in
`FacetTypeInfo::impls_constraints` instead, but this can be incorrect in
the presence of named constraints, which when completed can add more
interfaces to the `CompleteFacetType` and which are sorted into an
arbitrary order with the rest there.
---------
Co-authored-by: josh11b <15258583+josh11b@users.noreply.github.com>
During SemIR, when identifying a specific in a specific context, we'd
have to either look through a specific or through a bound method.
Canonicalize which one to look through first, by having the BoundMethod
created around a SpecificFunction instead.
This changes a lot of check tests.
TODO: As the SemIr does not currently allow removal (access to insts()
is intentionally const), the bound instruction created prior to finding
the specific is not removed from the instructions.
Options: (1) leave as is, (2) add a way to remove the previous bound,
(3) rethink how/when the BoundMethod inst is created.
- Explicitly document that `*Param` and `*ParamPattern` insts represent
`Call` parameters.
- Stop wrapping compile-time parameter patterns in `ValueParamPattern`
insts (because they aren't `Call` parameters).
- Document how `MatchContext::results_` relates to the `Call`
parameters, and be more consistent about when it's written to.
- Remove `RuntimeParamIndex::Unknown`: we no longer need to distinguish
"this `Param`'s runtime index is unknown" from "this `Param` isn't a
runtime param", because we no longer use `Param`s at all in the latter
case.
- Rename `RuntimeParamIndex` to `CallParamIndex`.
As a side effect of removing the `ValueParamPattern` insts, this fixes a
minor diagnostic bug where `NoteInitializingParam` didn't identify the
specific parameter that led to a deduction failure, because it expects
generic parameters to only be represented by `SymbolicBindingPattern`s,
but before this change they could be wrapped in `ValueParamPattern`s.
Doing so results in TODOs in the resulting semir, since we don't handle
combining the facet types together properly or doing lookup into them.
There's a test added demonstrating this, which will be made to work in
followups.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
An imported generic has bindings which are of type ImportRefLoaded, and
if they come from another package, they have no entity name attached to
them.
Since a binding name is always a constant-time value, we can get the
constant value instruction for the imported instruction to get a
canonical non-imported instruction. And that one will have a local
`NameId`.
---------
Co-authored-by: josh11b <15258583+josh11b@users.noreply.github.com>
Make facet types complete like other types. This means that in the body
of an interface, the type of `Self` is incomplete. This involved fixing
an issue where eval of a specific_id that was already canonical was not
resolving the specific declaration, which could occur as part of
substituting into a facet type.
---------
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Co-authored-by: Dana Jansens <danakj@orodu.net>
In line with the proposal in #4682, this changes the array syntax to be
array(T, N). `array` is a builtin keyword which must be followed by
parens containing two expressions and a separating comma.
The array type expression is still fully builtin, it does not forward to
a Core.Array library type yet. It merely adds the `ArrayType`
instruction, as was done with the previous syntax.
Followup work will change the instruction to reference to Core.Array,
once the library type exists and can be used directly.
---------
Co-authored-by: zygoloid <richard@metafoo.co.uk>
Treat template bindings as introducing template phase, and propagate it
in the same way we propagate the checked generic phase.
Rename "symbolic" to "checked symbolic" to make room for "template
symbolic". Also rename "phase" to "dependence".
Change parse tree from `template (T:! type)` to `(template T):! type`,
so that we have information about whether a binding is a template
binding available when forming the representation of the binding
pattern. This incidentally fixes a bug that we would accept `template
addr A:! B` instead of the intended `addr template A:! B`.
Track whether a symbolic binding is a template binding on the
`EntityName` object. I'm borrowing a bit from the `CompileTimeBindIndex`
for this in order to avoid making `EntityName`s larger. Longer-term, we
should think about using a different representation for symbolic
bindings, to avoid including these fields in all `EntityName`s, but
that's out of scope for this change.
So far, template bindings are treated as having the same phase as
checked bindings, but that will change in a future PR.
When a function has a generic FacetType parameter, it can depend on
other FacetTypes bound as earlier parameters. To deduce the FacetValue,
we need to know the impl to attach to it, which requires knowing the
full type signature of the generic FacetType parameter. To do this,
after deducing other arguments to determine the value of non-generic
FacetType parameters, we substitute them sequentially into later
symbolic parameters to get their full facet types, then converts the
arguments to those full facet types to get the FacetValue. For example:
```
fn F(T: type, U: Interface(T));
```
Here the `T` binding is deduced to the be the caller's argument type.
But the Interface(T) can not be properly deduced to a FacetValue in the
first pass, and it will just be the caller's argument type directly.
After the first deduce pass, we will substitute the deduced T binding
into Interface(T), at which point the argument type can and will be
converted to a matching FacetValue as long as an impl can be found.
Closes#4868
This is based on PRs #4881 and #4863
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
For an expression such as `(Type as Interface).AssocFn()`, track the
`Self` type `Type` in the result of the member access so that it's
available when checking the function call.
This introduces a new kind of type, `ImplFunctionType`, that represents
the type of a function that is expected within an impl, modeled as the
type of the function within the interface plus a value to use as `Self`.
Calls to values of this type behave like calls to the underlying
function except that the `Self` parameter is pre-bound to the self type
from the facet.
In order to support this, fix an issue where the imported list of
generic bindings lost their association with their enclosing generic.
This adds a little complexity to `import_ref`, including a new recursive
cycle that I intend to address in a follow-up PR.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
High level, replacing `Id::Invalid` with `Id::None` and `Id::is_valid`
with `Id::has_value` for clarity, as discussed
[here](https://discord.com/channels/655572317891461132/655578254970716160/1331664574545395794).
The `IntId` refactoring is needed together with `AnyIdBase` because it's
also used with `ValueStore`.
Note, trying to be careful not to rewrite `EnumBase::InvalidIndex`, or
`is_valid` in general (e.g., `IdKind::is_valid`).
I've tried to sequence commits here:
1. Automatic replacements:
- `((?:Id|Index)(?: |::|\(|Base(?:\(|::)))Invalid((?:Index)?\W)` ->
`$1None$2`
- `<invalid>` -> `<none>`
- `InvalidNodeId` -> `NoneNodeId`
- `/\*invalid\*/` -> `/*none*/`
- `id((?:_|\(\))(?:\.|->))is_valid` -> `id$1has_value`
2. Manual edits:
- In `int.h` and `int_test.cpp`
- `IntT` has `is_value`, which I'm renaming to `is_embedded_value`.
- Manual edits to comments in this file.
- `AnyIdBase` and `IdBase`
- Declaration of `is_valid` -> `has_value`, `InvalidIndex` ->
`NoneIndex`.
- In `ids.h` and `ids.cpp`
- `is_valid` -> `has_value`
- `// An explicitly invalid ID.` -> `// An ID with no value.`; similar
for index
- Various math on `InvalidIndex` -> `NoneIndex`
- Various mentions of "valid" in comments
- In `value_store.h`, for `IdT::Invalid`, plus one comment
- In `impl.h` and `tokenized_buffer.h`, we had different initialization
of `::None` values (versus `ids.h` syntax) that I fixed manually.
- Spot checks to compile
- Particularly where `is_valid` replacements didn't catch spots due to
different naming.
3. Autoupdate tests
4. verbose.carbon (NOAUTOUPDATE)
5. Comment spot checks
Note there are probably other mentions of "Invalid" that should be swept
up, but I'd like to argue for merging and separating out remaining
cleanup since this is so sweeping (and likely to hit merge conflicts
from churn). We'll probably have lingering mentions of "invalid" for a
bit regardless, just because there are uses of "invalid" in non-Id APIs.
Changes the name of SemIR `import_ref`s to use the format
`<package>.<entity>`.
<table>
<tr><th>Before</th><th>After</th></tr>
<tr>
<td><code>%import_ref.05a: type</code></td>
<td><code>%Main.D: type</code></td>
</tr>
<tr>
<td><code>%import_ref.8f2: <witness></code></td>
<td><code>%Main.import_ref.8f2: <witness></code></td>
</tr>
</table>
* [Discord discussion in
#toolchain](https://discord.com/channels/655572317891461132/655578254970716160/1330253540999827577)
* Closes#4769
This removes some churn when adding new diagnostic cases to test files
(where previous to this change the newly added newline would cause the
previous diagnostic CHECKs to be updated including changes to the line
number because the CHECK for the blank line meant an extra line between
CHECK and source line).
A few alternatives discussed here:
https://discord.com/channels/655572317891461132/655578254970716160/1329573358475673723
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Add a Vtable typed inst with a type_id (of the type this vtable applies
to) and list of virtual function decls (or import refs to function
object constants).
This doesn't add lowering/emission of the vtable, or usage when
initializing objects of the type.
Some questions in case they're interesting to discuss:
* is it right/worth having the type_id in the vtable? (probably makes it
easier to emit - using the type to get the class name to figure out the
mangled name for the vtable) perhaps it should be a ClassId?
* I'm thinking the logic in CheckCompleteClassType could be the place we
handle diagnostics for mismatched keywords (virtual/abstract for a
function that's already virtual/abstract, maybe checking for non-virtual
functions with the same name in a base class, or derived class functions
without `impl`, etc) - but we could move some of that to the moment we
walk the function decl, and record our findings in the function decl
(record the base function it overrides, or the index of the vtable to
slot to use when building the vtable at the end of the class)
* the Vtable typed inst has `constant_kind = InstConstantKind::Always`
and `is_lowered = false`, I think I added that in to workaround/address
some failures in lowering. And seems correct for this intermediate step
- I'll add lowering in a follow-up patch. But the constant_kind - what
should this be? We can just say all vtables are of VtableType (in which
case the `Always` constant kind sounds right to me) or we could have
them introduce a type with each virtual function as a named member,
even?
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
When printing a Class, the complete_type_witness was printed last but
this gave a somewhat misleading representation as it appeared to be part
of the !members label. Move it above the label so that the label more
clearly refers to everything below it.
Include the index rather than the name in the fingerprint of a symbolic
binding. While both the index and the name contribute to the canonical
identity, using either one of them in the fingerprint is sufficient to
ensure that distinct entities get different fingerprints. Changing the
name of a symbolic binding should ideally not result in fingerprint
changes, so exclude the name from the fingerprint when we have an index.
Use the canonical type and constraint when fingerprinting an impl, so
that uses of names in `name_ref` instructions aren't considered, only
the entity the name resolves to, and different ways of spelling the same
type have the same fingerprint. This similarly allows compatible changes
to be made to impls without changing the fingerprint.
Exclude the declaration block when determining the fingerprint of a
declaration. The declaration block contains the declarations of
parameters of the declaration, which do affect whether two declarations
are identical, but not whether they denote the same entity, because it
would be invalid to have different declaration blocks for declarations
with the same name in the same scope. Therefore changes to the
declaration block are compatible, and it's useful for such changes to
not affect the fingerprint.
This is not easy to test in isolation with our current testing
machinery. However, a follow-on PR will change the name of a parameter
in the prelude, and with this in place, will not cause any changes to
occur elsewhere in the toolchain tests.
Use it in the instruction namer to make instruction names more stable
across unrelated changes to the toolchain or the prelude.
---------
Co-authored-by: Dana Jansens <danakj@orodu.net>
* Change `InterfaceWitness` -> `ImplWitness`
* Include a `SpecificId` in the `ImplWitness`. This allows the
`InstBlock` it contains to have its own identity, allowing it to be
changed as the impl is processed. Evaluation only updates the specific.
* Create the `ImplWitness` at the start of the impl definition. In the
future, this will be populated with the values of non-function
associated constants. For now, it starts full of invalid instruction
ids.
* Implements the model suggested in #4672 .
Note that the non-SemIR testdata changes are to these file:
* `toolchain/check/testdata/impl/lookup/fail_todo_undefined_impl.carbon`
* `toolchain/check/testdata/struct/import.carbon`
* `toolchain/check/testdata/tuple/import.carbon`
The last two are due to an import of generics bug exposed by this PR,
which will be fixed in a follow-on.
---------
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Use a deque to maintain the set of instructions to be walked over. so
that the loop can append more instructions (with their related scope)
during iteration without requiring recursion.
---------
Co-authored-by: jonmeow <jperkins@google.com>
Instead of providing operations only for `i32`, provide them for all
`iN` and `uN` types.
For now, this excludes the `*Assign`, `Inc` and `Dec` interfaces,
because the implementations for those are defined as Carbon functions
rather than builtins, and we can't yet lower definitions for specific
functions, so converting those to be generic breaks the build for our
examples.
This is a precondition for enabling the new pattern-matching subsystem
to support binding patterns that have `if` expressions in the type
position.
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
When substituting into a generic in order to form a generic eval block,
we form `SpecificId`s to track the list of arguments that should
eventually be used to form a specific referenced by the eval block.
Values within that specific are not needed and won't ever be used, so
it's safe to skip forming them in the first place.
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
Dana JansensandRichard Smith
Alina Sbirlea
Geoff Romer
Boaz Brickner
Calvin
David Blaikie