We frequently want to operate on singletons. Per discussion, drop
`Singleton` to make the code shorter.
This started off as wanting to write `inst_id.is_error()`, but the
dependency relationship between ids.h and singleton_insts.h would
require some kind of delayed evaluation to allow the implementation to
remain in headers (which I suspect is helpful to have for inlining). I
could have added something like `IsErrorInst`, forward declared in ids.h
and defined in singleton_insts.h (which would always be included by
typed_insts.h), but the template approach felt like a decent balance
between (a) removing the boilerplate `::SingletonInstId`, (b)
understandability, (c) still visually mirroring if we immediately return
a singleton, and (d) flexibility for more than just `ErrorInst`. But TBH
I'd probably still have written `is_error()` if it didn't require
addressing the cross-header cycle.
Then I tried `SemIR::InstId::Is<SemIR::ErrorInst>`, which generally
worked with types but generated the complaint that it didn't shorten
*all* singleton uses. So pulling back on `::Is`, and instead just
dropping `Singleton`.
TypeInstId is an InstId whose constant value has a type of TypeType.
This includes:
- Type value instructions, the `ClassType` or `IntLiteralType`
instructions.
- Constraint value instructions, which are the `FacetType` and
`TypeType` instructions, each of which also have type TypeType.
TypeInstId encodes in the type system that it is safe to convert the
instruction's value to a TypeId, and CHECKs at construction that this
invariant is maintained.
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
This gives a slightly simpler representation for `UnboundElementType`s
in eval blocks, and in principle allows us to preserve the spelling of a
field's type into the `UnboundElementType` and thereby into a field
reference, although as of right now this doesn't affect our diagnostic
output in any way.
During error recovery for a field with a non-concrete type, preserve the
type in the `UnboundElementType` regardless. It's not really problematic
to have a non-concrete type there, and this makes it easier to track the
instruction used to specify the type.
This is a step towards switching symbolic types to always be abstract
during type checking.
Each of these types takes another type as an operand. Instead of storing
that other type as a `TypeId`, store it as an `InstId` so that we can
track how it was written, not only its canonical form.
The canonical constant values of these types continue to store the
canonical constant values of their operands, as normal.
---------
Co-authored-by: Dana Jansens <danakj@orodu.net>
Emitting definitions in check. This resolves the crash in lowering which
necessitated definitions be emitted.
Some of the test changes need further review.
When a generic function declaration was encountered for the second or
more time, we would FinishGenericRedecl() for the function decl, but
this just popped the generic region stack and moved on.
The issue with that is when the stack entry is gone, we lose the
symbolic constants from that declaration, and are unable to rewrite them
to point to the actual generic. This left us with a function declaration
with abstract symbolic values that were not useful, and in a function
call we use the declaration attached to the definition, which would be a
declaration with broken symbolic values. Then the function would be
uncallable since deduce would be unable to determine argument types
without the generic bindings.
This resolves the issue for functions, as well as ensuring the correct
generic id from a previous declaration is used for other generic entity
types that have redeclarations.
When a function declaration is qualified, such as defining a class
method outside the class body, we need only the function declaration to
contribute to its generic region stack. The code was collecting constant
values from all qualifier segments together incorrectly.
So when we PushNameQualifierScope(), we also drop the current generic
region stack and rewrite its constant values by calling
FinishGenericRedecl(), and open a new stack entry for the next part of
the qualified declaration.
If a generic declaration somehow has more dependent instruction than a
previous declaration, it would add new instructions to its eval block
with indices beyond the elements in the actual declaration eval block,
since we only store the block from the first declaration found. To avoid
this we plumb through that we are in a redeclaration, and terminate with
an ICE instead of adding new instructions to crash on later.
Fixes#5136.
Building on #5151 reducing `UncheckedLoc` use, further remove uses of
the `SemIR::LocIdAndInst` constructor where we typically have overloads
that don't need it. Add parallel convenience wrappers for placeholder
insts.
Also refactors `MergeReplacing`. I don't think it makes sense to add an
overload for `ReplaceLocIdAndInstBeforeConstantUse`, but we can still
reduce the `LocIdAndInst` construction there.
According to approved syntax at
https://github.com/carbon-language/carbon-lang/blob/trunk/proposals/p3848.md#syntax-defined,
`fn F[]` without explicit parameters should be valid. This makes it
work, then adds some validation to prevent `class C[]` in check.
Note that for `fn`, positional parameters are a TODO -- but this allows
me to test validation in `fn destroy[]` which is rejected, not just a
TODO.
This tripped over a lowering crash when a member function with self was
declared-but-not-defined, so that's why some test cases were updated to
have (empty) function definitions.
I'll follow-up with/look into a fix for the
self-declared-but-not-defined cases separately.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Co-authored-by: Carbon Infra Bot <carbon-external-infra@google.com>
In order to have the name available for diagnostics, we now always set
`NameId` in `NameContext` and put `poisoning_loc_id` as part of the
union with `resolved_inst_id` instead (since we never need both).
This in particular uses free functions because it's likely to end up
more consistent with types (versus a wrapper object for InstStore).
Note, this is unlikely to have a performance impact, but if it does, we
can look into related approaches (and we've already discussed using
LTO).
Renames `PendingBlock::AddInst` to `PendingBlock::Add` because
`MakeElementAccessInst` expects the matching name to exist.
This creates a new check/type.h for most logic, and also moves some
functions to TypeStore in sem_ir/type.h. My approach for TypeStore is to
focus on moving the read-only functions there.
Note this mirrors parse_tree().packaging_decl().is_impl, but I'm
preferring to keep the version that doesn't access the parse tree so
that we could change tree storage without hurting as much.
context.cpp is getting large, so I'm looking at a few ways to cut out
clusters of functions. This felt like a logical cluster of functions to
move to their own file.
Note I have two commits in this PR: one moving the functionality to a
new file, and one specifically changing TypeCompleter to use out-of-line
function implementations. This is to assist reviewability.
High level, replacing `Id::Invalid` with `Id::None` and `Id::is_valid`
with `Id::has_value` for clarity, as discussed
[here](https://discord.com/channels/655572317891461132/655578254970716160/1331664574545395794).
The `IntId` refactoring is needed together with `AnyIdBase` because it's
also used with `ValueStore`.
Note, trying to be careful not to rewrite `EnumBase::InvalidIndex`, or
`is_valid` in general (e.g., `IdKind::is_valid`).
I've tried to sequence commits here:
1. Automatic replacements:
- `((?:Id|Index)(?: |::|\(|Base(?:\(|::)))Invalid((?:Index)?\W)` ->
`$1None$2`
- `<invalid>` -> `<none>`
- `InvalidNodeId` -> `NoneNodeId`
- `/\*invalid\*/` -> `/*none*/`
- `id((?:_|\(\))(?:\.|->))is_valid` -> `id$1has_value`
2. Manual edits:
- In `int.h` and `int_test.cpp`
- `IntT` has `is_value`, which I'm renaming to `is_embedded_value`.
- Manual edits to comments in this file.
- `AnyIdBase` and `IdBase`
- Declaration of `is_valid` -> `has_value`, `InvalidIndex` ->
`NoneIndex`.
- In `ids.h` and `ids.cpp`
- `is_valid` -> `has_value`
- `// An explicitly invalid ID.` -> `// An ID with no value.`; similar
for index
- Various math on `InvalidIndex` -> `NoneIndex`
- Various mentions of "valid" in comments
- In `value_store.h`, for `IdT::Invalid`, plus one comment
- In `impl.h` and `tokenized_buffer.h`, we had different initialization
of `::None` values (versus `ids.h` syntax) that I fixed manually.
- Spot checks to compile
- Particularly where `is_valid` replacements didn't catch spots due to
different naming.
3. Autoupdate tests
4. verbose.carbon (NOAUTOUPDATE)
5. Comment spot checks
Note there are probably other mentions of "Invalid" that should be swept
up, but I'd like to argue for merging and separating out remaining
cleanup since this is so sweeping (and likely to hit merge conflicts
from churn). We'll probably have lingering mentions of "invalid" for a
bit regardless, just because there are uses of "invalid" in non-Id APIs.
Add a Vtable typed inst with a type_id (of the type this vtable applies
to) and list of virtual function decls (or import refs to function
object constants).
This doesn't add lowering/emission of the vtable, or usage when
initializing objects of the type.
Some questions in case they're interesting to discuss:
* is it right/worth having the type_id in the vtable? (probably makes it
easier to emit - using the type to get the class name to figure out the
mangled name for the vtable) perhaps it should be a ClassId?
* I'm thinking the logic in CheckCompleteClassType could be the place we
handle diagnostics for mismatched keywords (virtual/abstract for a
function that's already virtual/abstract, maybe checking for non-virtual
functions with the same name in a base class, or derived class functions
without `impl`, etc) - but we could move some of that to the moment we
walk the function decl, and record our findings in the function decl
(record the base function it overrides, or the index of the vtable to
slot to use when building the vtable at the end of the class)
* the Vtable typed inst has `constant_kind = InstConstantKind::Always`
and `is_lowered = false`, I think I added that in to workaround/address
some failures in lowering. And seems correct for this intermediate step
- I'll add lowering in a follow-up patch. But the constant_kind - what
should this be? We can just say all vtables are of VtableType (in which
case the `Always` constant kind sounds right to me) or we could have
them introduce a type with each virtual function as a named member,
even?
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Rename `CheckIsAllowedRedecl` to `DiagnoseIfInvalidRedecl` to try to
better document behavior, and clean up comments.
This extends the no-merge-if-defined behavior to functions. It was
already the case for class/interface, and just added for impl, so if
anything functions were now inconsistent. I was kind of tempted to make
a helper for it, but I didn't think of a great structure/name to get
there: `DiagnoseRedef` isn't always called when it's a redefinition, for
example due to `extern` diagnostics, it's hard to combine.
Cleans up `is_defined` calls to rely more on `has_definition_started`,
removing some code paths that are unused since definitions aren't
merged.
This change splits `NodeKind::IdentifierName` into separate node kinds
depending on whether the identifier is followed by parameters, and
similarly splits `NameQualifier` based on whether the qualifier has
parameters. This enables us to only push a pattern block when it's
actually needed, rather than "defensively" pushing one when it might be
needed.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Change the implementation to use an explicit `is_poisoned` bit instead
of `InstId::PoisonedName` value.
Zero behavior change.
This would allow to more easily change the API to support accessing the
poisoning declaration so we can have better name poisoning diagnosis.
#4622
* Change `InterfaceWitness` -> `ImplWitness`
* Include a `SpecificId` in the `ImplWitness`. This allows the
`InstBlock` it contains to have its own identity, allowing it to be
changed as the impl is processed. Evaluation only updates the specific.
* Create the `ImplWitness` at the start of the impl definition. In the
future, this will be populated with the values of non-function
associated constants. For now, it starts full of invalid instruction
ids.
* Implements the model suggested in #4672 .
Note that the non-SemIR testdata changes are to these file:
* `toolchain/check/testdata/impl/lookup/fail_todo_undefined_impl.carbon`
* `toolchain/check/testdata/struct/import.carbon`
* `toolchain/check/testdata/tuple/import.carbon`
The last two are due to an import of generics bug exposed by this PR,
which will be fixed in a follow-on.
---------
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
When a generic requires a symbolic type to be complete, add a new
`require_complete_type` instruction to the generic eval block. During
monomorphization of such an instruction, require that type to be
complete.
This is a preparation change for adding name poisoning support
(https://github.com/carbon-language/carbon-lang/issues/4622), which is
expected to require more elaborate logic around NameScope since a name
can be not defined yet, defined, or poisoned.
The API separates looking up a name from getting the full entry since we
have cases where the entries are invalidated between the time we're
looking for the name and when we access (and sometimes modify) the
entry.
This change has the following benefits:
* `names` and `name_map` are internal to `NameScope` and are guaranteed
to match.
* `extended_scopes` and `import_ir_scopes` can not be manipulated (only
new scopes can be added).
* `inst_id`, `name_id` and `parent_scope_id` are constants.
* `has_error` can only be mutated from false to true.
---------
Co-authored-by: jonmeow <jperkins@google.com>
`ids.h` and `ids.cpp` are the manual edits, everything else is
search-and-replace.
The full list of things moved is:
- `TypeId::TypeType`
- `TypeId::AutoType`
- `TypeId::Error`
- `ConstantId::Error`
This is to unblock removing `InstId::Builtin*`.
Represent the type as an `InstId` rather than as a `TypeId` to preserve
how it was written and better support tracking its value in a generic.
Add accessors to `Class` to get the base and adapted type to reduce code
duplication, and add `TypeStore::GetObjectRepr` to make it easier to map
from a type to its possibly-adapted object representation type. In
passing, also move `GetIntTypeInfo` and `GetUnqualifiedType` into
`TypeStore`.
This fixes specifics of generic adapters to properly look at the
specific adapted type, and also fixes importing of adapters.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
We considered a couple of other options for this:
* https://github.com/carbon-language/carbon-lang/pull/4515 Keep the
`ElementIndex` numbering vptr-ignorant, and do +1 offsets as needed -
seems subtle/easy to miss
* https://github.com/carbon-language/carbon-lang/pull/4517 Always have a
zeroth element in the object representation, make it zero-size in the
case of no-vptr - @zygoloid was concerned this would add overhead
especially to stateless objects used in type-trait-like things.
But currently moving forward with this direction - of initializing field
indexes with an invalid value until the end of the class definition,
then assigning field indexes during construction of the class's object
representation struct type. This direction might reinforce/help avoid
premature access to the object representation before the class is
complete, and give a single place where class layout is done (at class
completion) if we want to add more options there, such as class layout
optimizations, etc.
This patch still has problems with object initialization (that #4515
does not have/does address) but does address normal `obj.member` access
correctly.
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
This is for more clearly distinct names, and to make it a clearer
transition from `BuiltinInst` for name conflicts. `FloatType` is also an
instruction, and we have `Carbon::Error` (common/error.h). This avoids
affecting tests, although the name is embedded in the builtin test.
In `LegacyFloatType`, `Legacy` because I was having trouble coming up
with a more appropriate name. I'm not clear this is a `FloatLiteralType`
at present, it needs some work to mirror `IntLiteralType`.
In `ErrorInst`, the suffix `Inst` was discussed as good and similar to
`BuiltinInst` (although I'm trying to get rid of that).
Stop rejecting `extend adapt` of non-class types such as struct and
tuple. These don't actually work just yet because name lookup into
struct and tuple types is a special case that doesn't handle adapters,
but this gets us a bit closer.
This also slightly improves error recovery for name lookup into an
invalid scope.
* The `extended_scopes` in a `NameScope` were represented by a
`NameScopeId`. Replace that with an `InstId` of an instruction returning
the type that is extending this name scope.
* `Context::LookupQualifiedName` now can take multiple scopes to look
in.
* `GetAsLookupScope` was moved out of `member_access.cpp` and is now
`Context::AppendLookupScopesForConstant`
This PR also fixes some existing issues that were revealed as part of
writing and testing this PR:
* Additional validation and handling of invalid ids.
* `extend impl` in a class is not properly imported yet, but at least
now it doesn't crash.
The change to use an `InstId` also allowed some diagnostics and
formatting to be improved.
---------
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
This converts `StructTypeField` from an instruction to a dedicated type,
with its own store. This had originated from discussing how
`.GetAs<SemIR::StructTypeField>` was more prevalent than for other
instructions, but is probably more interesting for the storage savings
(16 bytes StructTypeField + 4 byte LocId + 4 byte InstId -> 8 byte
StructTypeField).
Due to the different structure, these now have their own stack during
construction, reducing (but not eliminating) `args_type_info_stack_`
use-cases.
The test changes of different InstIds is expected because structs and
classes generate fewer instructions now. Other than that, results should
remain the same.
I'm generally trying to avoid unrelated cleanup here due to the PR size,
though I did scrutinize the `VerifyOnFinish` calls, adding one and
commenting others (putting them in member order because that's how I was
checking what was verified and what wasn't).
- Generate runtime indices as part of pattern matching, rather than as a
separate postprocessing/rewriting step.
- In contexts where runtime parameters aren't permitted, avoid emitting
insts for them to begin with, rather than trying to detect the problem
and rewrite the IR to remove them later on.
A small step to virtual functions - adding vtable pointers to the
layout, but not initializing or otherwise using them at this stage.
A few open design questions I'd love feedback on:
* Is this the right/good enough SemIR representation for now? This patch
adds a `is_dynamic` attribute to `SemIR::Class` and populates/flags it
based on the flag of the base class, or if any virtual function is
declared in the class (or, at least that's my intent). Some other
options include:
* Each `Class` could store a `ClassId` (or `TypeId`?) of the (possibly
indirect, possibly self) base class that is the first one that is
dynamic/has a vtable pointer
* Could make the property narrower, like `has vtable pointer` and have
it `true` only on the type that introduces the vtable - then derived
classes would have to walk their base classes to check if they're the
one that needs to define the vtable pointer or not
* Should the vtable be the first element in the type? If there's a
non-dynamic base type, we could have a layout that's `{<non-dynamic base
type>, vtable ptr, <derived members>}`? Derived types would still be
able to uniquely identify where their vtable pointer is just fine... -
and the vtable pointer is, in a sense, a member of that intermediate
type, so it does seem a bit strange to force it to the front - but I
guess it's probably more efficient in some ways?
Open to any other suggestions/advice/thoughts on the direction, etc.
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Also propagate the pattern IR along with the pattern-match IR, and use
it where appropriate.
Strictly speaking, some parts of the pattern-match IR are allocated
eagerly, while traversing the pattern's parse tree, but they still
aren't actually emitted until we traverse the associated pattern insts.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Thomas Köppe
Jon Ross-Perkins
Dana JansensandRichard Smith
Boaz Brickner
Alina Sbirlea
Geoff RomerandJon Ross-Perkins
