Add check support for `for` loops following #1885. This also adds a
basic `Optional` type to the prelude, as that's necessary to support the
new `Iterate` interface.
Depends on #5688, #5697. Those PRs aren't stacked here, but this change
will crash until they land.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Use TypeInstId in many more places where the instruction is required
to/known to always be a type value. This should be a somewhat exhaustive
set of places, as it covers all instructions given to
GetTypeIdFromTypeInstId().
The things of interest here are:
- Singleton instructions are always of type TypeType, so they are now
TypeInstIds.
- ErrorInst::SingletonInstId gets upcast to be an InstId because it's
sometimes used to define the type of a variable (as in `auto inst_id =
SemIR::ErrorInst::SingletonInstId;` that may hold other InstIds.
- Parse nodes don't really know about TypeInstId, so NodeStack::Push
needs to do some special casing to avoid CHECK failures when given a
TypeInstId but expecting an InstId. We leave a TODO behind here because
the nodes which are being pushed a TypeInstId should probably be taught
to expect that, but such a change is a bit tricky, so too much for this
PR.
TypeInstId is an InstId whose constant value has a type of TypeType.
This includes:
- Type value instructions, the `ClassType` or `IntLiteralType`
instructions.
- Constraint value instructions, which are the `FacetType` and
`TypeType` instructions, each of which also have type TypeType.
TypeInstId encodes in the type system that it is safe to convert the
instruction's value to a TypeId, and CHECKs at construction that this
invariant is maintained.
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
This doesn't change functionality, but I was seeing better diagnostics
in VS Code.
This also changes the NodeId constructors for related types (also
NodeCategory and NodeIdForKind) to use UnsafeMake for construction. That
originated from avoiding ambiguity coming from `requires`, but the
constructor mode is also one we should typically avoid (e.g., preferring
`Parse::Tree::As`).
In line with the proposal in #4682, this changes the array syntax to be
array(T, N). `array` is a builtin keyword which must be followed by
parens containing two expressions and a separating comma.
The array type expression is still fully builtin, it does not forward to
a Core.Array library type yet. It merely adds the `ArrayType`
instruction, as was done with the previous syntax.
Followup work will change the instruction to reference to Core.Array,
once the library type exists and can be used directly.
---------
Co-authored-by: zygoloid <richard@metafoo.co.uk>
Parameter lists need substantially different treatment than tuple
patterns in other contexts, so this change splits them into separate
parse node kinds.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
This adds support for choice types at a similar level to that of a C
enum, where each alternative has a name but no additional
data/parameters attached to it. We generate a TODO diagnostic if
parameters are specified.
Because there's no extra data, the storage is a simple unsigned integer
discriminant of the smallest possible size.
A choice without any alternatives is not constructible. A choice with a
single alternative is, and has an empty tuple in place of a discriminant
since it has only one state. The empty tuple is used to make the class
non-constructible. This can be improved.
Each alternative is turned into a let binding on the choice that is a
value of the choice with that alternative set as the active one in the
discriminant. This isn't possible to write in user code with a class
right now, since the let binding has the same type as the choice
(which is a class) it is within. It's possible to generate it in semir
however by adding the binding after the class is marked complete.
Change parse tree from `template (T:! type)` to `(template T):! type`,
so that we have information about whether a binding is a template
binding available when forming the representation of the binding
pattern. This incidentally fixes a bug that we would accept `template
addr A:! B` instead of the intended `addr template A:! B`.
Track whether a symbolic binding is a template binding on the
`EntityName` object. I'm borrowing a bit from the `CompileTimeBindIndex`
for this in order to avoid making `EntityName`s larger. Longer-term, we
should think about using a different representation for symbolic
bindings, to avoid including these fields in all `EntityName`s, but
that's out of scope for this change.
So far, template bindings are treated as having the same phase as
checked bindings, but that will change in a future PR.
To do this, we restructure the parse tree to make `forall` a leaf node
that comes before the parameter list.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Change representation of package names from `IdentifierId` to
`PackageNameId`, and add a special value `PackageNameId::Core` for the
Core package. Add a `Core` expression to name the Core package, and
support for parsing the `Core` keyword in `package` and `import`
declarations.
For now, I've made no changes to instruction fingerprinting or name
mangling. This means that fingerprints and mangled names will collide
between names in the `Core` package and names in a `r#Core` package. See
#4908.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
When a node kind's Id::Kind is determined from its category, don't also
require it to be listed in the switch over all node kinds. This was both
redundant and also error prone -- and in practice for several node
kinds, the Id::Kind computed in the two different ways was different.
Instead, have the switch over node kinds handle only special cases that
can't be handled by their category, and enforce that each node kind has
an Id::Kind specified in exactly one way via checks in the .cpp file.
This refines the previous change in #4280 -- we still get the improved
errors for missing updates, but now also don't require redundant
additions to the switch.
Add a full entity representation for associated constants, and build a
`Generic` object for them. This `Generic` is parameterized by the
enclosing `Self` type, allowing the use of `Self` within the type of the
associated constant to be supported.
When performing impl lookup for an associated constant, produce the type
with the provided self type substituted for its `Self` along with any
generic parameters of the interface.
Split the handling of associated constant declarations into two parts,
corresponding to the code before the `=`, and the code between the `=`
and `;` (if any). The former goes into the generic declaration region;
the latter into the generic definition region. This prepares us to
handle the default value for an associated constant, but for now we're
just storing the information and not actually using it.
Remove the entity type field from `assoc_entity_type`, because it's
almost unused and is an attractive nuisance -- it must necessarily be a
type in the generic scope of the associated constant rather than in the
scope of the instruction (because there is no `Self` anywhere else),
which means that it's hard to substitute into or derive meaning from.
See `toolchain/check/testdata/impl/assoc_const_self.carbon` for tests of
the new functionality; these used to cause the toolchain to crash.
This is a followup from #4834, I searched for "invalid" uses in our
codebase. This is mostly changing comments, and a couple debug
functions, but shouldn't affect testable behavior.
Note a couple things I'll highlight as not changing (but could) are:
- `ReturnTypeInfo::is_valid`
- `"invalid"` uses in the formatter
- `AddInvalid` for `!has_value` in `inst_fingerprinter` (because the
cases it's called sound invalid-ish)
High level, replacing `Id::Invalid` with `Id::None` and `Id::is_valid`
with `Id::has_value` for clarity, as discussed
[here](https://discord.com/channels/655572317891461132/655578254970716160/1331664574545395794).
The `IntId` refactoring is needed together with `AnyIdBase` because it's
also used with `ValueStore`.
Note, trying to be careful not to rewrite `EnumBase::InvalidIndex`, or
`is_valid` in general (e.g., `IdKind::is_valid`).
I've tried to sequence commits here:
1. Automatic replacements:
- `((?:Id|Index)(?: |::|\(|Base(?:\(|::)))Invalid((?:Index)?\W)` ->
`$1None$2`
- `<invalid>` -> `<none>`
- `InvalidNodeId` -> `NoneNodeId`
- `/\*invalid\*/` -> `/*none*/`
- `id((?:_|\(\))(?:\.|->))is_valid` -> `id$1has_value`
2. Manual edits:
- In `int.h` and `int_test.cpp`
- `IntT` has `is_value`, which I'm renaming to `is_embedded_value`.
- Manual edits to comments in this file.
- `AnyIdBase` and `IdBase`
- Declaration of `is_valid` -> `has_value`, `InvalidIndex` ->
`NoneIndex`.
- In `ids.h` and `ids.cpp`
- `is_valid` -> `has_value`
- `// An explicitly invalid ID.` -> `// An ID with no value.`; similar
for index
- Various math on `InvalidIndex` -> `NoneIndex`
- Various mentions of "valid" in comments
- In `value_store.h`, for `IdT::Invalid`, plus one comment
- In `impl.h` and `tokenized_buffer.h`, we had different initialization
of `::None` values (versus `ids.h` syntax) that I fixed manually.
- Spot checks to compile
- Particularly where `is_valid` replacements didn't catch spots due to
different naming.
3. Autoupdate tests
4. verbose.carbon (NOAUTOUPDATE)
5. Comment spot checks
Note there are probably other mentions of "Invalid" that should be swept
up, but I'd like to argue for merging and separating out remaining
cleanup since this is so sweeping (and likely to hit merge conflicts
from churn). We'll probably have lingering mentions of "invalid" for a
bit regardless, just because there are uses of "invalid" in non-Id APIs.
The "templated for consistency" variants felt a little confusing when I
was working on #4795, so suggesting to remove templating where it's not
helpful to instantiate (particularly when there were both templated and
non-templated variants). Note this leaves a `PeekIs<IdT>` because
there's indirection there, but that's more the exception than the rule.
This change splits `NodeKind::IdentifierName` into separate node kinds
depending on whether the identifier is followed by parameters, and
similarly splits `NameQualifier` based on whether the qualifier has
parameters. This enables us to only push a pattern block when it's
actually needed, rather than "defensively" pushing one when it might be
needed.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Pursuant to discussion regarding #4699, turn on
`misc-non-private-member-variables-in-classes` using the
`IgnoreClassesWithAllMemberVariablesBeingPublic` flag (the check treats
structs as classes, so we need this for structs with all-public
members). Updates the style guide notes to match, which should be pretty
minor due to the scoping of test fixtures.
Also fixes some underscore uses in test files on the way. Basically this
is keeping the style for [class data member
naming](https://google.github.io/styleguide/cppguide.html#Variable_Names)
even while making them public.
This removes a lot of boilerplate `Print` functions in favor of a
CRTP-based approach that uses a `Label` field as an automatic prefix.
This `Label` is also made available for other purposes, particularly
`IdKind` crash messages in this change. In particular, for
`RequireIdKind` in node_stack.h from using numeric IdKinds (e.g., 5 and
24) to something that will print `IdKind(<label>)` (this came up
recently on #toolchain).
While I'm in here, also doing some other tinkering:
- Moving operators to be `friend` members, to reduce the extra
templating now that the base types are templated.
- Adjusts IntId diagnostics from `int [...]` to `int(...)` for
consistency with other id printing.
- Changes InstBlockId's label from "block" to "inst_block", since we
have multiple blocks now.
- Fixes StructTypeFieldsId to use "struct_type_fields" instead of
"type_block" (from `TypeBlockId`)
- Does some more adjustments from camelCase to snake_case for
consistency
Undoes a chunk of #4125 because nobody's really in favor of keeping the
formatting, and it's occasionally caused a crash in Formatter to
dominate output (and even when working, it can be verbose; the source
location in (5) is often more helpful).
Basically goes back to:
```
4. Check::Context
NodeStack:
0. LetIntroducer: no value
1. BindingPattern: inst+15
2. LetInitializer: no value
3. StructLiteralStart: no value
inst_block_stack_:
0. block<invalid> {inst+0, inst+1, inst+6, inst+7, inst+8, inst+9, inst+10, inst+11, inst+12}
1. global_init {}
pattern_block_stack_:
0. block<invalid> {}
param_and_arg_refs_stack:
0. block<invalid> {}
args_type_info_stack_:
0. block<invalid> {}
5. alias_of_alias.carbon:15:12: checking StructLiteral
let d: c = {};
^~
```
Fixes#4145
This converts `StructTypeField` from an instruction to a dedicated type,
with its own store. This had originated from discussing how
`.GetAs<SemIR::StructTypeField>` was more prevalent than for other
instructions, but is probably more interesting for the storage savings
(16 bytes StructTypeField + 4 byte LocId + 4 byte InstId -> 8 byte
StructTypeField).
Due to the different structure, these now have their own stack during
construction, reducing (but not eliminating) `args_type_info_stack_`
use-cases.
The test changes of different InstIds is expected because structs and
classes generate fewer instructions now. Other than that, results should
remain the same.
I'm generally trying to avoid unrelated cleanup here due to the PR size,
though I did scrutinize the `VerifyOnFinish` calls, adding one and
commenting others (putting them in member order because that's how I was
checking what was verified and what wasn't).
Split StructComma into StructLiteralComma and StructTypeLiteralComma in
order to easily differentiate handling (remains the same in this PR).
Add "Literal" to StructField and StructTypeField because it feels
inconsistent versus the other non-shared things. StructFieldDesignator
remains shared between value literals and type literals.
Note I probably would've made StructFieldDesignator non-shared too, but
that'd require either a lookahead of 2 (to see the separator`) or a
writeback after parsing the separator, neither of which felt especially
crucial for this, when what I'm really trying to do is split type
literal handling a little further.
The check stage now produces SemIR instructions to represent a `where`
clause. It still does not check types.
---------
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Right now, there is no checking of `where` requirements. The result of a
where expression is just the type on the left-hand side. It does now
introduce `.Self` so that it is available in expressions on the
right-hand side, in addition to designators corresponding to the members
of type on the left-hand side. Note, though, that diagnostics could
still be improved significantly.
---------
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
This switches `DCHECK` and `FATAL` as well.
The goal is to reduce the code size impact of these assertions so that
we can keep more of them enabled. Currently, the largest cost I see from
`CHECK` is not the actual check or the cold code itself, but actually
the failure to inline trivial functions due to the presence of the cold
code. This means that our goal isn't to reduce apparent code size in the
final binary but the LLVM IR cost assessed for these routines in the
inliner, which closely correlates with code size but is a bit different.
As discussed in #4283, experimentation shows that a single function call
with a minimal number of arguments is the lowest cost model for these.
This is easily achieved with a format-string API that internally uses
`llvm::formatv`. This PR is essentially the `CHECK` version of #4283.
However, the check macros are substantially harder to make work with
both format strings and streaming because they also take a condition.
Also, unexpectedly, I was very successful at devising a regular
expression based automated rewrite from the streaming to the format
string form with only low 10s of manual fixes. This includes compacting
strings broken up across lines, etc. Given how well that went, I've
prepared this PR which just directly switches to the format string API
and migrate everything to use it.
One nice side-effect is that the format string approach ends up greatly
simplifying the implementation here as well.
This is ... *shockingly* effective. Parsing speeds up by more than 3%
with just this change. And checking speeds up by **8%** with this change
alone:
```
BM_CompileAPIFileDenseDecls<Phase::Parse>/256 86.3µs ± 1% 82.9µs ± 1% -3.94% (p=0.000 n=17+19)
BM_CompileAPIFileDenseDecls<Phase::Parse>/1024 431µs ± 1% 415µs ± 1% -3.76% (p=0.000 n=18+19)
BM_CompileAPIFileDenseDecls<Phase::Parse>/4096 1.77ms ± 1% 1.71ms ± 1% -3.18% (p=0.000 n=18+19)
BM_CompileAPIFileDenseDecls<Phase::Parse>/16384 7.44ms ± 1% 7.17ms ± 2% -3.56% (p=0.000 n=18+20)
BM_CompileAPIFileDenseDecls<Phase::Parse>/65536 30.7ms ± 1% 29.7ms ± 1% -3.15% (p=0.000 n=18+20)
BM_CompileAPIFileDenseDecls<Phase::Parse>/262144 131ms ± 1% 127ms ± 1% -2.81% (p=0.000 n=18+18)
BM_CompileAPIFileDenseDecls<Phase::Check>/256 878µs ± 2% 800µs ± 1% -8.91% (p=0.000 n=19+20)
BM_CompileAPIFileDenseDecls<Phase::Check>/1024 1.88ms ± 2% 1.72ms ± 1% -8.56% (p=0.000 n=19+20)
BM_CompileAPIFileDenseDecls<Phase::Check>/4096 5.78ms ± 2% 5.28ms ± 1% -8.70% (p=0.000 n=20+18)
BM_CompileAPIFileDenseDecls<Phase::Check>/16384 21.9ms ± 1% 20.1ms ± 1% -8.02% (p=0.000 n=18+20)
BM_CompileAPIFileDenseDecls<Phase::Check>/65536 90.4ms ± 2% 83.1ms ± 1% -8.04% (p=0.000 n=19+20)
BM_CompileAPIFileDenseDecls<Phase::Check>/262144 381ms ± 2% 352ms ± 1% -7.79% (p=0.000 n=19+19)
```
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Co-authored-by: josh11b <15258583+josh11b@users.noreply.github.com>
Includes support for the `impls`, `=`, and `==` requirement operators to
the right of a `where`, but `and` to allow multiple requirements is
still a TODO.
---------
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
I've repeatedly struggled with very obscure build errors that turned out
to be caused by a newly-introduced node kind getting inappropriately
defaulted to `Id::Kind::Invalid`. Dropping the default will turn those
mistakes into much more straightforward "missing case in switch" errors.
Support for types (particularly classes) is left as a TODO.
There's also an issue I'm observing with a "define in impl" test, but
this is probably an issue with resolving the prior declaration which is
imported indirectly. The PR was already feeling big, so I'm choosing to
cut here.
Note, this does not implement the rule "The owning library's API file
must import the `extern` declaration, and must also contain a
declaration."
Changes crash messages to start printing verbose forms of instructions,
rather than just the ID. Fixes some indentation issues with stacks. Also
switches unexpected inst formatting, because now there are lots, and
it'd be helpful to know where they are.
This uses a pimpl pattern for Formatter due to the number of member
functions on Formatter. Maybe we should refactor that, but this didn't
feel like a good place to do so.
Note, I have two concerns about this change... to note them here, to
make sure others are considering them when evaluating the
implementation:
1. Some instructions are very verbose to print, as evidenced by the
fn_decl printing (which includes function params) or scope printing
(which includes scope members).
- I'm not sure whether there's a way to simply reduce this, as it seems
essential to the requested printing of instructions.
- Long-term, we may at least want to limit the number of lines printed
here. However, I've already spent a fair amount of time here and I think
it's in a good state to evaluate.
2. Increased complexity in the crash handler may result in crash
messages failing to generate.
- For example, a crash in Formatter (and its deps, such as InstNamer or
location handling) prevents a stack from being printed. I'm pretty sure
I've written crashes in Formatter before.
Here's an example crash snippet (generated by adding a crash inside
`return` handling) before:
```
2. NodeStack:
0. FunctionDefinitionStart -> function2
1. ReturnStatementStart -> no value
2. IntLiteral -> inst+26
inst_block_stack_:
0. block<invalid> {inst+0, inst+1, inst+2, inst+23}
1. block9 {inst+26}
param_and_arg_refs_stack:
args_type_info_stack_:
```
And after:
```
2. Check::Context
NodeStack:
0. FunctionDefinitionStart: function2
1. ReturnStatementStart: no value
2. IntLiteral:
unexpected.inst+26.loc12_10: i32 = int_literal 0 [template = constants.%.2]
inst_block_stack_:
0. block<invalid> {
package: <namespace> = namespace [template] {
.Core = unexpected.inst+2
.F = unexpected.inst+23.loc11_22
}
unexpected.inst+1 = import Core
unexpected.inst+2: <namespace> = namespace unexpected.inst+1, [template] {}
unexpected.inst+23.loc11_22: %F.type = fn_decl @F [template = constants.%F] {
unexpected.inst+9.loc11_9: init type = call constants.%Bool() [template = bool]
unexpected.inst+10.loc11_9: type = value_of_initializer unexpected.inst+9.loc11_9 [template = bool]
unexpected.inst+11.loc11_9: type = converted unexpected.inst+9.loc11_9, unexpected.inst+10.loc11_9 [template = bool]
unexpected.inst+12.loc11_6: bool = param b
@F.%b: bool = bind_name b, unexpected.inst+12.loc11_6
unexpected.inst+19.loc11_18: init type = call constants.%Int32() [template = i32]
unexpected.inst+20.loc11_18: type = value_of_initializer unexpected.inst+19.loc11_18 [template = i32]
unexpected.inst+21.loc11_18: type = converted unexpected.inst+19.loc11_18, unexpected.inst+20.loc11_18 [template = i32]
@F.%return: ref i32 = var <return slot>
}
}
1. block9 {
unexpected.inst+26.loc12_10: i32 = int_literal 0 [template = constants.%.2]
}
param_and_arg_refs_stack:
args_type_info_stack_:
```
Mirroring #4003 for NodeCategory.
Note we template a lot more on NodeCategory's enum, so this is a
slightly more awkward delta.
Also, switch from Enum in KeywordModifierSet to RawEnumType for
consistency with EnumBase. The templating on NodeCategory had me
thinking about that more.
Parse the name of a declaration as a sequence of `NameQualifier`s --
which have a name, possibly parameters, and a trailing period --
followed by a name and possibly parameters. This prepares us for parsing
declarations of members of generic classes and similar cases, but
actually supporting such member redeclarations is left to a future
change.
We previously required functions to have parameters, but no longer do,
following the direction of #3848. Cases like namespaces that can't
actually have parameters are now diagnosed in check instead of in parse.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
- Adds an empty prelude.carbon file
- Imports that file in any non-Core package file
- Adds --disable-prelude-import to avoid that
- Adds --exclude-dump-file-prefix to be able to hide files from dumping
- Used to hide core files (we can't do this by package name due to lex
dumps, for example)
- Restructures some tests to not rely on `i32`, particularly `alias`
tests (which rely on a name ref) and tests with no prelude.
I'm adding the framework for switching i32 to calling Int32 in the
prelude, but I'm running into a separate error actually switching over.
So that *mostly* works, but isn't quite ready for prime time. However,
maybe the current state of this PR is still useful to review since it
does a lot of the infrastructure work and adds the %Core everywhere?
This is achieving a similar goal as #3849, using placeholders instead of
an ambiguous start node to clarify structure and incrementally simplify
checking. The benefit isn't quite as big here because both paths are
structs, and so checking is more consistent than paren exprs versus
tuples. But I think this removes the only other multi-purpose parse
node.
This uses StructLiteral/StructTypeLiteral naming, reflecting equivalent
SemIR naming. Note, I would lean towards renaming StructLiteral to
StructValueLiteral, but I think consistency in naming takes precedence.
Any renames of StructLiteral might be better in a separate PR.
StructFieldType/StructFieldValue -> StructTypeField/StructField is
trying to making the reading more consistent with
StructTypeLiteral/StructLiteral. SemIR has StructTypeField but not a
value equivalent.
I've been thinking about this since we decided to add placeholders in
the parse tree. This allows a clearer division of work in check
handling, where we were doing work for ExprOpenParen that's only
necessary for tuples (splitting/renaming handle_paren.cpp accordingly).
For now, a builtin function is defined by specifying a string literal
initializer in a function declaration:
```carbon
fn MyBuiltin(a: i32) -> i32 = "builtin.name";
```
End-to-end support is included for a sample `"int.add"` builtin
performing integer addition, covering constant evaluation and code
generation.
The implementation here needs substantial refactoring before we'll be
ready to start adding more builtins. That refactoring work will be
coming next. This change is aiming to checkpoint some incremental
progress.
Provide a general mechanism for determining the kind of the args of an
instruction. Use this to simplify instruction profiling a little. The
intent is to also use this mechanism as the basis of a substitution
mechanism, which will be part of a future patch.
Note that this causes us to do three table lookups and two indirect
calls in inst_profile per instruction, instead of one table lookup and
one indirect call. We can revisit this if it shows up in profiles.
This was previously discussed at
https://discord.com/channels/655572317891461132/655578254970716160/1209975051588210729.
I'm initiating this mainly because we typically use "id" suffixes to
indicate an `IdBase` being passed around and the non-id suffix of
`parse_node` suggests at it carrying more data than it actually does.
There used to be more reason for avoiding `node_id` because
`SemIR::InstId` used to be named `NodeId`, but that's no longer
necessary. As a consequence, I'd like to rename `parse_node` to more
precisely reflect its type.
In full, this is doing:
```
parse_node_kind -> node_kind
parse_node -> node_id
ParseNodeCategory -> NodeCategory
ParseNodeKind -> NodeKind
ParseNode -> NodeId
```
This is primarily in check and sem_ir, but with some `parse_node_kind`
references in parse too.
Pluralization is consistent with name forms on both sides, so that
wasn't part of my replacements.
To make the implementation simpler, make `PopWithParseNodeIf` return
`pair<NodeId, optional<value>>` rather than `optional<pair<NodeId,
value>>`. While wrapping the whole result in `optional` seems more
principled, it's significantly harder to work with.
This undoes parts of #3515 in order to allow PushGlobalInit to be called
when the initializer is called, instead of at the end of the binding
pattern. The current approach is fragile because supported patterns will
become more complex. We also will likely want similar support in `let`,
which puts the initializer first, so this offers a consistent approach
for both.
[Looking
back](https://discord.com/channels/655572317891461132/655578254970716160/1184237511766179840),
this is more or less the second option in that message, but using the
PeekNextIs to avoid vagueness about what's being popped first.
Note I'm putting in PeekNextIs for what I'm hoping will be a pretty
narrow use-case. I could've added depth arguments to the Peek functions,
but that would've rippled through a number of APIs and it's not clear to
me that this has generic utility. I mean, right now it could just be
PeekNextIsVariableInitializer, since it's only optional in that case.
They don't have names, but using the DeclNameStack anyway keeps our
behavior more consistent, and keeps track of the enclosing name scope
and the prior state of the scope stack for us.
Depends on #3683.
Richard SmithandJon Ross-Perkins
Geoff Romerandjosh11b
Dana Jansens
CJ Johnson