This also switches to a more Bazel-based install layout, skipping the
FHS-based synthetic layout. The FHS-based layout is still reconstructed
explicitly when building an installable tar-ball.
The biggest change is to configure the just-built install as a Bazel
toolchain, including allowing it to build its own runtime libraries as
native Bazel libraries. This removes the need for a monolithic runtimes
build, all of that code logic is removed.
This should also pave the way to using the just-built toolchain for
doing a full 3-stage bootstrap. Building the 2nd stage is included here
as it was a particularly effective way to test that the Bazel
integration was fully working. Adding a 3rd-stage check for stability is
future work, but should be pretty easy.
There is a down-side: this uses the busybox to do the runtimes
compilation, which means they will be re-built after ~any change to
Carbon. However, the integration with Bazel should largely pay for this,
and we can continue to factor the tests away from depending on built
runtimes in most cases.
Now that we're building and testing the runtimes more directly, this
surfaced a problem with the layout of runtimes on macOS that is fixed
here. All of the Darwin OSes use a custom layout for their resource
directory compared to other targets. We now model this in both the C++
built runtimes and the Bazel built runtimes.
Assisted-by: Gemini via Antigravity
directory
This cleans up the `//toolchain/install/BUILD` file and the tree
generally to be more focused on arranging the actual installation rather
than preparing inputs to that installation.
I picke `//toolchain/runtimes` so we can put other runtimes preparation
logic there, but open to any other suggested organization.
There are other runtimes things that would in theory make sense to move
such as the `prebuilt_runtimes` logic, but a subsequent PR will delete
those and so I'm leaving them where they are for now.
Mainly because "sorting_diagnostic_consumer" is legacy, since
`SortingDiagnosticConsumer` became `SortingConsumer`. Also better
reflecting contents of these files.
Where I'm not renaming, I'm less positive about dropping "diagnostics"
from "file_diagnostics" and "null_diagnostics" (which contain both a
consumer and emitter, and "null.h" seems like poor naming), so not doing
that here. Also "diagnostic.h" contains `struct Diagnostic`, so is a
decent fit.
Assisted-by: Google Antigravity with Gemini 3 Flash
The YAML test helpers didn't use the `Printable` abstraction in one
place and instead directly used `<<` with a `std::ostream`. This matches
the `require`s expression in the `error_test_helpers.h` printing logic
for `ErrorOr`, but fails to provide the necessary implementation for
`llvm::formatv` to succeed with the `Yaml::Value` type.
The main fix is to use `Printable` and to define the `Print` method in
terms of `llvm::raw_ostream`. We already have all the mapping hooks in
place to also support `std::ostream` when needed based on that
definition.
This also adds some constraints to the printing in
`error_test_helpers.h` so it is a bit less under-constrained and more
understandable when it is correctly being used. These are just tidying
though, they aren't what makes these headers work together.
I've added a test to try and make sure these test helpers compose as
well.
When an error diagnostic has an unattached location, for example because
the diagnostic points into a file that's in the prelude, use the next
attached location to position the error diagnostic's CHECK line. In
particular, if the error is followed by a note, use the position of the
note to determine where to place the error.
This exposes a general mechanism to do final fixups of the CHECK lines
to individual file_test binaries, which the toolchain's binary uses to
special-case error / warning CHECK lines.
Stop using the clang tooling library to build an ASTUnit; that library
is set up to process clang frontend arguments, assuming that something
has already built frontend arguments from the compiler arguments. It is
also too encapsulated and doesn't let us inspect and modify the compiler
invocation before it's executed.
Instead, build the AST unit directly in two phases:
* FIrst, take a list of clang driver arguments and convert them into a
list of compiler arguments, using `clang::createInvocation`. Internally,
this uses the clang driver to build a frontend invocation, including
building system-specific include paths as needed.
* Then, directly build an ASTUnit from this compiler invocation.
I've factored this so that we can split out the `createInvocation` step,
with the intention that we may want to move it out of check and into the
carbon driver with the rest of the driver-level argument handling, and
we may want to customize some of the clang options before we invoke the
clang frontend with that set of options.
In order to make the invocation reusable, it no longer depends on the
name of the carbon file importing the C++ code. In place of synthesizing
a header file name as `<foo.carbon>.generated.cpp_imports.h`, we now
insert line marker directives into the generated header so that errors
in that header cause Clang to point a diagnostic back at the Carbon
source file itself. This results in a minor improvement in the
diagnostic output: we no longer refer to a nonexistent generated file.
But the snippet still contains text that doesn't match the source code,
so it remains imperfect.
---------
Co-authored-by: Chandler Carruth <chandlerc@gmail.com>
Adds minimal defaults for codegen so that those tests don't need to
specify the full command line.
Moves driver/testdata/compile to check/testdata/basics/raw_sem_ir, which
seems like it better reflects the focus. Removes the textual IR test
because we have plenty of those now.
Moves a multiline token diagnostic test to parse because (a) diagnostics
doesn't have other tests and (b) this is really testing the way that
parse structures the location.
Drops `--include-diagnostic-kind` from some driver tests that aren't
testing a diagnostic, so the flag felt a bit like noise (even before
this change, there are a few tests that don't specify it because they're
not intended to test an emitted diagnostic, just high-level diagnostic
behaviors).
Adds some comments to reflect my understanding of why a test exists,
when I was pausing to think about it.
Modifies the stdin test to do more dumps; which happens to expose we
currently misbehave.
`FindIfOrNull` returns a pointer to the element in the range if it's
found, and nullptr otherwise. `FindIfOrNone` returns a copy of the
element in the range if it's found, and `T::None` (for a range of
elements of type `T`) otherwise. `Contains` returns a bool indicating
whether the element in the range is found.
These functions replace `llvm::find()` and `llvm::find_if()` when you
want a single answer back instead of an iterator. This avoids the need
to check against `end()`, allowing the return condition to be tested as
a standard bool.
We replace uses of `find()` and `find_if()` that did not require an
iterator with these new helpers.
Note that the return type of `FindIfOrNull` is a pointer since we can
not write `optional<T&>`, which must be tested for null. If the null
check is omitted, UB occurs and the resulting code may end up with an
incorrect pointer (https://crbug.com/40153300) into the range (or
elsewhere), rather than a null dereference. And this would be very
confusing to debug. Hopefully debug builds and sanitizers keep this from
being an issue we sink a bunch of time into debugging.
Rules executed by bazel don't necessarily have the right environment to
find the symbolizer, which was the intent of `cc_env` setting
`LLVM_SYMBOLIZER_PATH`. So far, this has kind of been a case-by-case
fix, but every so often I'm trying to debug a crash in a test that
doesn't provide it. Rather continuing down this route, instead add
drop-in wrappers for cc rules so that it's hard to forget.
Note `bazel/cc_rules` is intended to mirror `bazel/carbon_rules` and
`bazel/cc_toolchains`, rather than `@rules_cc`.
AFAICT there isn't a great way to add this as a default for the `bazel
run` environment. It's not typically going to be set on its own,
forwarding `$PATH` would be too broad, and the [action
`env_sets`](https://bazel.build/docs/cc-toolchain-config-reference#using-action-config)
I think are not quite what we need (I think those don't include output
execution, only compilation).
It's helpful for stability to not have the path in the repo reflected in
test files, something I'm separately running into. So to reduce this,
align INCLUDE-FILE with other split behavior:
- Use the filename (with a "include_files/" subdir to disambiguate),
rather than the full path.
- Note if we eventually want to support splits in these, the same
approach could be extended.
- Only provide as an arg if the user requests files as args.
Factoring AddFile back because it's hard to share; I'm also advocating
to remove the prelude manifest, which would mean the remaining call
could be removed.
The INCLUDE-FILE option is only used in the toolchain tests for now. If
specified in a file test, the given file path is added to the test's
arguments. For toolchain tests this makes the file's package available
to the test. The `--custom-core` command line flag is added to the
driver, which avoids adding the production `Core` package to the command
line. Together, these allow a test to provide their own minimal `Core`
package.
For example, this would replace `Core` with the package and prelude in
`facet_types.carbon`.
```
// INCLUDE-FILE: toolchain/testing/min_prelude/facet_types.carbon
// EXTRA-ARGS: --custom-core
```
To support this:
* //testing knows how to parse INCLUDE-FILE out of the header of a test
file.
* //testing adds the file to the virtual file system, and includes it in
the test's arguments.
* //toolchain/driver grows the --custom-core command line flag to avoid
loading the production `Core` package.
Tests that were creating their own minimal prelude to define BitAnd on
types are now pointed to
toolchain/testing/min_prelude/facet_types.carbon as the prelude. They no
longer need to `import Core` in each test as a result.
Such tests are no longer `no_prelude`, but instead have their own
prelude. So they are moved to a `min_prelude` subdirectory.
Closes#5076
This takes the mechanism currently used for autoupdate and expands it to
the regular tests (deliberately trying to unify logic for
test/autoupdate/dump to deliver consistent behavior). I'm seeing about a
85% reduction in test time, though results will vary based on test
system.
This does some small edits to test output to make it fit better with the
new flow. Note I'm stopping printing of the "here's how to run" on every
test by default, since it's autoupdated into file content by default.
However, it's still there for test failures.
---------
Co-authored-by: Geoff Romer <gromer@google.com>
This adds a RawStringOstream. Versus TestRawOstream, which is
consolidated over to RawStringOstream, it uses a string for storage
instead of a vector, mainly to support move-to-string semantics. Versus
llvm::raw_string_ostream, it owns the string and supports pwrite (which
is needed for driver and its fd_ostream compatibility requirement).
This converts most uses of llvm::raw_string_ostream, leaving behind a
few in InstNamer that explicitly cannot own the string, such as:
```
llvm::raw_string_ostream(name)
<< "_" << tree.tokens().GetColumnNumber(token);
```
I have this as its own library so that it can use CHECK.
Yes this doesn't save much code, but it's code we repeatedly write.
---------
Co-authored-by: Geoff Romer <gromer@google.com>
This refactors the diagnostic kind coverage check into something that
also works for node kinds. Then, since this points out a few node kinds
that aren't having their parse verified, I'm adding minor tests for
those.
Use the diagnostic kind printing in #4425 to catch when we have
diagnostics with no tests.
This merges a couple other use-cases of filegroup manifests into a
common rule.
Note I do add a few tests for things, and also some things are
_actually_ unit tested (just not in the file_test structure). But I
stopped when I realized that dealing with merge conflicts is going to be
a pain. I might end up reverting test changes (as part of merge conflict
resolution) and doing narrow test additions in a separate PR, after both
this and #4425 are merged.
Undoes most of #4347, because of [performance
complaints](https://discord.com/channels/655572317891461132/707150492370862090/1295527235133898772).
With a 30-ish frame stack trace and `-c dbg`, my installed
`llvm-symbolizer` still seems slow (~6s), but the hermetic
`llvm-symbolizer` adds ~4s (i.e., ~10s total). I don't think we can
easily force the hermetic version to build in opt configuration, so I'm
backing it out.
Note in particular that this fixes an issue where SharedValueStore had
been shared across files, when they should be per-file. This is only
visible when doing multiple compilations in a single test, which was
rare before.
This also moves these tests into the Testing namespace. My memory of the
various namespacing changes is that we'd generally agreed to have tests
in Testing so that we'd see SemIR:: and similar, same as we would in a
lot of the implementation.
This extracts out the SourceBuffer handling of `-` in order to trivially
share it.
Note this still has a number of TODOs, it's just setting up the
essential subcommand infrastructure, with some tests demonstrating that
it at least does something.
This only sets the symbolizer for our more used targets; not sure if
there's a great way to set it everywhere (I suppose I could try wrapping
cc_binary etc rules if there's a strong preference).
There is a downside here, symbolizing a fastbuild crash seems to take
about 3s. Not sure if there's a good way to get a faster llvm-symbolizer
execution...?
I tried running with the new LLVM update without the
LLVM_SYMBOLIZER_PATH, and it looks like that's insufficient. With the
settings, I now get readable crashes:
```
#9 0x000055dc007d1724 void Carbon::Internal::CheckFail<Carbon::TemplateString<5>{"FATAL"}, Carbon::TemplateString<27>{"toolchain/driver/driver.cpp"}, 84, Carbon::TemplateString<0>{}, Carbon::TemplateString<3>{"err"}>() (/usr/local/google/home/jperkins/.cache/bazel/_bazel_jperkins/85deb7d9d96f7e0e80b42618a55969d7/sandbox/linux-sandbox/9383/execroot/_main/bazel-out/k8-fastbuild/bin/toolchain/testing/file_test.runfiles/_main/toolchain/testing/file_test+0x2894724)
```
Note the LLVM update is for
https://github.com/llvm/llvm-project/pull/109021
The `file_test` layer still adds it to the VFS and filters it from the
dump output, but the driver now injects it into the compilation unites
depending on the `--import-prelude` file (enabled by default).
This doesn't address improvements to how we find the prelude code, just
sinking the needed logic into the driver itself.
- Adds an empty prelude.carbon file
- Imports that file in any non-Core package file
- Adds --disable-prelude-import to avoid that
- Adds --exclude-dump-file-prefix to be able to hide files from dumping
- Used to hide core files (we can't do this by package name due to lex
dumps, for example)
- Restructures some tests to not rely on `i32`, particularly `alias`
tests (which rely on a name ref) and tests with no prelude.
I'm adding the framework for switching i32 to calling Int32 in the
prelude, but I'm running into a separate error actually switching over.
So that *mostly* works, but isn't quite ready for prime time. However,
maybe the current state of this PR is still useful to review since it
does a lot of the infrastructure work and adds the %Core everywhere?
I'd kept these in to separate the bazel module update from the BUILD
file changes, then forgot about it. I think all of these can be cleanly
removed now. I think it's something we should clean up for consistency
with the bazel central repository names; I think it's best to reduce
that divergence.
llvm_zlib and llvm_zstd remain because of how llvm depends on the
particular names.
Per their documentation, the `llvm::Initialize*` functions are only
supposed to be called by the main program, not by a library like
toolchain/codegen. Fixes a hang due to a data race in multithreaded
autoupdate.
Add a utility class `Carbon::InitLLVM` to do the common LLVM
initialization shared by all Carbon tools, optionally including
initializing the LLVM targets. Because the LLVM targets add a lot of
binary size, only initialize them for binaries that opt in by depending
on a new target `//common:all_llvm_targets`.
Also fix `//explorer:file_test` and `//explorer:file_test.trace` to
share a binary rather than linking an identical binary twice.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
This is an incremental improvement on our diagnostic messages that
simply underlines an entire token if the token is larger than 1 char
(else it points to the single char with a caret like it used to).
Running `bazel test //...` reported:
```
Test execution time outside of range for MODERATE tests.
Consider setting timeout="short" or size="small".
```
This change adds size="small" to avoid such warnings being reported.
---------
Co-authored-by: Chandler Carruth <chandlerc@gmail.com>
Previous code could fail silently, only caught with yaml output
mismatches. This uses ErrorOr to be explicit about the error detection;
recovery isn't supported because we should only print valid yaml (in
tests, at least).
Also moves the test helpers from //toolchain/base to
//toolchain/testing.
Switches tree_test to use the matchers so that, on mismatch, gtest
prints a path to the mismatch (the straight value means it was just
printing "not equal").
Addresses
https://github.com/carbon-language/carbon-lang/pull/3217#discussion_r1323586836
Specifically this should improve linking by producing one large binary
instead of one-per-directory. The inclusion of the driver hits the size
issue. Separating out things which have more llvm deps has been
discussed, but I'm not doing that here because I think the semantics
layer will need to depend on clang for interop, and we'd lose a lot of
the benefits that way. Also, having just one place to look seems
simpler.
Includes supporting changes to file_test infrastructure, the most
significant of which is probably passing tests via file instead of a
really large args thing, using a custom rule to do that. That's because
dealing with the layered filegroups that allow the toolchain setup is
more complicated, and this approach scales well.
Combined test time is ~9s, so not sharding right now.
I wasn't sure if people would prefer having the autoupdate script under
testing, so I left it alone for now.