When parsing a pattern, if we encounter something that isn't pattern
syntax, try parsing as an expression instead. We only need one-token
lookahead to distinguish pattern syntax from expression syntax.
Track a precedence group through pattern parsing so that we can allow
different kinds of expressions in a top-level pattern (such as the
operand of `let`) and in a nested pattern (such as a subpattern of a
tuple pattern or within grouping parens). For example, we do not allow
`case if ...`, and for now I've chosen to also not allow logical or
relational operators at the top level of a pattern, so `case 1 + 1` is
OK, but `case 1 == 1` and `case true and false` require parentheses.
This decision should be ratified or revisited by a design proposal.
Very basic check support is also provided, only sufficient to form an
`ExprPattern` instruction and nothing beyond that. For now, all pattern
matching against an `ExprPattern` fails with a TODO error. To support
that, I've switched from calling `BeginSubpattern` in the parent handler
of a pattern and `EndSubpatternAs*` in the pattern handler itself to
calling both functions in parent handlers, with `EndSubpattern`
converting an expression into an expression pattern where needed.
Depends on #6976.
Assisted-by: Gemini via Google Antigravity
This change ensures that a function signature always starts with an
`IdentifierNameMaybeBeforeSignature` node (renamed from
`IdentifierNameBeforeParams`), even in the case of function declarations
like `fn F -> T` that have no parameter list. As a consequence, this
ensures that we push new entries onto `pattern_block_stack` and
`full_pattern_stack` when we start processing the function signature.
In line with the proposal in #4682, this changes the array syntax to be
array(T, N). `array` is a builtin keyword which must be followed by
parens containing two expressions and a separating comma.
The array type expression is still fully builtin, it does not forward to
a Core.Array library type yet. It merely adds the `ArrayType`
instruction, as was done with the previous syntax.
Followup work will change the instruction to reference to Core.Array,
once the library type exists and can be used directly.
---------
Co-authored-by: zygoloid <richard@metafoo.co.uk>
Parameter lists need substantially different treatment than tuple
patterns in other contexts, so this change splits them into separate
parse node kinds.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
This removes some churn when adding new diagnostic cases to test files
(where previous to this change the newly added newline would cause the
previous diagnostic CHECKs to be updated including changes to the line
number because the CHECK for the blank line meant an extra line between
CHECK and source line).
A few alternatives discussed here:
https://discord.com/channels/655572317891461132/655578254970716160/1329573358475673723
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
This change splits `NodeKind::IdentifierName` into separate node kinds
depending on whether the identifier is followed by parameters, and
similarly splits `NameQualifier` based on whether the qualifier has
parameters. This enables us to only push a pattern block when it's
actually needed, rather than "defensively" pushing one when it might be
needed.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Also surround it in square brackets rather than parentheses. This
matches the format used by Clang and GCC, and means diagnostics will
still match the `file:line:col: error: ` pattern used by some IDE tools.
Before:
```console
fail_builtins.carbon:11:11: error(AliasRequiresNameRef): alias initializer must be a name reference
```
After:
```console
fail_builtins.carbon:11:11: error: alias initializer must be a name reference [AliasRequiresNameRef]
```
Also tighten up test regex to only match on `STDERR` lines that list a
file name.
This is to help identify which diagnostics we're actually using.
Note that driver/testdata still has tests which don't pass this flag,
and so continue to test the kind-less (default) behavior.
This is a primarily automated change:
- Search & replace for capitalization
-
`(CARBON_DIAGNOSTIC\((?:\n\s+)?\w+,(?:\n\s+)?\s\w+,(?:\n\s+)?\s")([A-Z])`
- `$1\L$2`
- Search & replace for period
-
`(CARBON_DIAGNOSTIC\((?:\n\s+)?\w+,(?:\n\s+)?\s\w+,(?:\n\s+)?\s"(?:[^)]|\n)+)\.("[,)])`
- `$1$2`
- Limited search & replace for `ERROR: ` -> `error: ` in streamed things
- Leaving a TODO for command_line because there's more cleanup that can
be done there
- Modify diagnostic_consumer.cpp
- ERROR -> error
- WARNING -> warning
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
This has is a nice-to-have for me. Frequently I want to run a specific
test, and end up digging through output to be able to copy-paste the run
line. This uses TIP lines to inject the command into the file when using
AUTOUPDATE.
Note, one of the reasons I want this is because "bazel test
//toolchain/testing:file_test --test_output=all" has been regularly
exceeding bazel's output limit for me (workaround is either opening the
output file or specifying an obscure output limit flag), making it a
little harder for me to get the commands. However, frequently I'm adding
a file and want to iterate on it, so that's really the use case I have
in mind here.
This is achieving a similar goal as #3849, using placeholders instead of
an ambiguous start node to clarify structure and incrementally simplify
checking. The benefit isn't quite as big here because both paths are
structs, and so checking is more consistent than paren exprs versus
tuples. But I think this removes the only other multi-purpose parse
node.
This uses StructLiteral/StructTypeLiteral naming, reflecting equivalent
SemIR naming. Note, I would lean towards renaming StructLiteral to
StructValueLiteral, but I think consistency in naming takes precedence.
Any renames of StructLiteral might be better in a separate PR.
StructFieldType/StructFieldValue -> StructTypeField/StructField is
trying to making the reading more consistent with
StructTypeLiteral/StructLiteral. SemIR has StructTypeField but not a
value equivalent.
The purpose of the newline is to make it clearer where a given
diagnostic begins and ends, particularly as the first message of a
diagnostic may not be the error.
This is a trivial code change, but ripples edits through test files.
I was suggesting this because `FloatingPoint` is pretty long. `int` and
`float` should be familiar abbreviations. `unsigned` should be familiar
to developers too, but `UnsignedInt` still feels usefully clearer for
the additional chars.
This is an incremental improvement on our diagnostic messages that
simply underlines an entire token if the token is larger than 1 char
(else it points to the single char with a caret like it used to).
For now, we require the same introducer to be used each time a class is
declared, but see #3384.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Implement toolchain support for `returned var` and `return var`.
- Modeled `returned` in the parse tree as a `ReturnedSpecifier`
appearing after the `VariableIntroducer`.
- Modeled `return var` in the parse tree as a `ReturnVarSpecifier`
appearing after the `ReturnStatementStart`.
- Factored out the implementation of `return` statement and `returned
var` handling in check into a new `return.{h,cpp}`. The parse nodes
themselves are still handled in `handle_*.cpp`. This allows easy code
reuse between `return` and `returned var`.
This removes a (very) hot branch in the lexer where we need to special
case when a token is the first token and can't look at its previous
token. It also seems like a generally nice change to the structure of
both the token buffer and parse tree as there are now bracketing
elements for both ends and we should be able to avoid similar branching
in the future.
Mostly mechanical updates to the lexer and parser code to handle this,
but also needed to special case the location information in the
autoupdate code. And then the usual large body of auto-updated tests.
No benchmark data for this change alone as in isolation and in the
current lexer structure it doesn't make a big difference. But this
branch was particularly difficult to handle when trying to update the
whitespace skipping code to be faster, and so I think it is worth
systematically avoiding the special case here.
This makes the difference between errors and lower-level diagnostics
visible to users, and aligns the toolchain's behavior with the
expectations in `driver_fuzzer.cpp`.
Continuing with #3070. Just a dir and file rename (mostly removing
prefixes, although for parse_tree_fuzzer and parse_tree_file_test I'm
dropping "tree" instead of "parse"). Everything in the parse dir should
be marked as a move.
Richard Smith
Geoff Romer
Dana Jansensandzygoloid
David BlaikieandJon Ross-Perkins
josh11bandJon Ross-Perkins
Jacob Schneider
Chandler Carruth