This adds the `static` token to the lexer and parses it as a modifier.
In check, `FullPatternStack::Kind::FieldDecl` is now used for both
static and non-static vars. Static vars get treated basically the same
as `NameBindingDecl`s.
Global initialization is used for static var initializers. To make the
necessary stack information available to `pattern_match.cpp`, the
`full_pattern_stack` and `decl_introducer_state_stack` are now popped
later in `handle_let_and_var.cpp`.
In lowering, each class's body is checked for `VarStorage` insts and
lowered the same as global vars.
Class vars are still restricted to simple `name: type` bindings, not
full patterns. This is now handled in the check phase instead of during
parsing.
This is in preparation for supporting `static var`.
This change ensures that a function signature always starts with an
`IdentifierNameMaybeBeforeSignature` node (renamed from
`IdentifierNameBeforeParams`), even in the case of function declarations
like `fn F -> T` that have no parameter list. As a consequence, this
ensures that we push new entries onto `pattern_block_stack` and
`full_pattern_stack` when we start processing the function signature.
Every test that used `addr` before #6283 should be using `ref` after
this PR. In most cases that was done in #6283, but this PR transitions a
few that I missed in that first pass. In addition, #6283 cloned the old
`addr` tests from `foo.carbon` to `foo_addr.carbon` in order to maintain
test coverage during the transition; this PR removes those cloned tests.
Parameter lists need substantially different treatment than tuple
patterns in other contexts, so this change splits them into separate
parse node kinds.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
This removes some churn when adding new diagnostic cases to test files
(where previous to this change the newly added newline would cause the
previous diagnostic CHECKs to be updated including changes to the line
number because the CHECK for the blank line meant an extra line between
CHECK and source line).
A few alternatives discussed here:
https://discord.com/channels/655572317891461132/655578254970716160/1329573358475673723
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
This change splits `NodeKind::IdentifierName` into separate node kinds
depending on whether the identifier is followed by parameters, and
similarly splits `NameQualifier` based on whether the qualifier has
parameters. This enables us to only push a pattern block when it's
actually needed, rather than "defensively" pushing one when it might be
needed.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
These don't fully work in check and beyond yet, because they're not
added into lexical lookup, but already mostly do the right thing.
Per #3407, disallow namespace declarations anywhere other than at file
scope for now.
We don't treat statements starting with a packaging introducer keyword
(`package`, `library`, `import`) as declarations because they're
sufficiently unlikely to occur that the error recovery doesn't seem
important, and this avoids needing to disambiguate `package.` at the
start of an expression.
Split StructComma into StructLiteralComma and StructTypeLiteralComma in
order to easily differentiate handling (remains the same in this PR).
Add "Literal" to StructField and StructTypeField because it feels
inconsistent versus the other non-shared things. StructFieldDesignator
remains shared between value literals and type literals.
Note I probably would've made StructFieldDesignator non-shared too, but
that'd require either a lookahead of 2 (to see the separator`) or a
writeback after parsing the separator, neither of which felt especially
crucial for this, when what I'm really trying to do is split type
literal handling a little further.
Also surround it in square brackets rather than parentheses. This
matches the format used by Clang and GCC, and means diagnostics will
still match the `file:line:col: error: ` pattern used by some IDE tools.
Before:
```console
fail_builtins.carbon:11:11: error(AliasRequiresNameRef): alias initializer must be a name reference
```
After:
```console
fail_builtins.carbon:11:11: error: alias initializer must be a name reference [AliasRequiresNameRef]
```
Also tighten up test regex to only match on `STDERR` lines that list a
file name.
This is to help identify which diagnostics we're actually using.
Note that driver/testdata still has tests which don't pass this flag,
and so continue to test the kind-less (default) behavior.
This is a primarily automated change:
- Search & replace for capitalization
-
`(CARBON_DIAGNOSTIC\((?:\n\s+)?\w+,(?:\n\s+)?\s\w+,(?:\n\s+)?\s")([A-Z])`
- `$1\L$2`
- Search & replace for period
-
`(CARBON_DIAGNOSTIC\((?:\n\s+)?\w+,(?:\n\s+)?\s\w+,(?:\n\s+)?\s"(?:[^)]|\n)+)\.("[,)])`
- `$1$2`
- Limited search & replace for `ERROR: ` -> `error: ` in streamed things
- Leaving a TODO for command_line because there's more cleanup that can
be done there
- Modify diagnostic_consumer.cpp
- ERROR -> error
- WARNING -> warning
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
This has is a nice-to-have for me. Frequently I want to run a specific
test, and end up digging through output to be able to copy-paste the run
line. This uses TIP lines to inject the command into the file when using
AUTOUPDATE.
Note, one of the reasons I want this is because "bazel test
//toolchain/testing:file_test --test_output=all" has been regularly
exceeding bazel's output limit for me (workaround is either opening the
output file or specifying an obscure output limit flag), making it a
little harder for me to get the commands. However, frequently I'm adding
a file and want to iterate on it, so that's really the use case I have
in mind here.
Change syntax for package declaration to put the `impl` keyword at the
start and remove the `api` keyword.
To support this, rearrange processing of package, library, and import
declarations to use the general modifier handling support in declaration
parsing rather than special-case logic.
There is an ambiguity in `impl package.Foo as Bar`, which we resolve by
treating `package` as an introducer after a modifier only if it's not
followed by `.`.
When we expect a semicolon, we should be able to provide more standard
recovery.
Note this affects a test of `base`, but it looks like a partial
improvement (the prior line was moving too far). Still, it looks like
recovery isn't handling `{}` quite right. I'm not trying to address that
here though -- leaving a TODO.
This is achieving a similar goal as #3849, using placeholders instead of
an ambiguous start node to clarify structure and incrementally simplify
checking. The benefit isn't quite as big here because both paths are
structs, and so checking is more consistent than paren exprs versus
tuples. But I think this removes the only other multi-purpose parse
node.
This uses StructLiteral/StructTypeLiteral naming, reflecting equivalent
SemIR naming. Note, I would lean towards renaming StructLiteral to
StructValueLiteral, but I think consistency in naming takes precedence.
Any renames of StructLiteral might be better in a separate PR.
StructFieldType/StructFieldValue -> StructTypeField/StructField is
trying to making the reading more consistent with
StructTypeLiteral/StructLiteral. SemIR has StructTypeField but not a
value equivalent.
The purpose of the newline is to make it clearer where a given
diagnostic begins and ends, particularly as the first message of a
diagnostic may not be the error.
This is a trivial code change, but ripples edits through test files.
This doesn't add full support. I'm separating it out to make the effects
of the modifier changes clearer for review. I'm restructuring a little
with the expectation that we'll have some more categories of modifier
keywords in the future (similar to `extern`, these may not be in a "set"
such as access), and thus easily scaling up to a few more would be
useful.
Note #3486 rewrites the macro behavior, and is already approved: so this
PR is only for the changed enforcement during error. Also, #3493 already
changed several things to allow any token while this PR was awaiting
review, but this still changes enforcement for `For` and `If`.
This was brought up on
[#toolchain](https://discord.com/channels/655572317891461132/655578254970716160/1182066616456970251),
and I think this any-on-error approach gets at least some support. We
could try setting it to the introducer, but it's quite possible we want
it to be something like the token which led to the parse error, rather
than a static token. That leads to a conclusion that, most typically,
we'll expect arbitrary tokens when error conditions may lead to tokens
which aren't the expected token.
A couple related, recent `CARBON_IF_ERROR` crash fixes can be found in
#3404 and #3424. Something like #3404 would've been needed regardless
because `namespace` didn't have `CARBON_IF_ERROR` before, although I
might've missed the underlying issue with declarations because only
`namespace` had a relevant test (that is, if #3404 had added
`CARBON_ANY_TOKEN_ON_ERROR`, I wouldn't have had a crash in #3462).
#3424 would've been avoided with this change because there was a
`CARBON_IF_ERROR`, and it was just too restrictive.
This leaves a single state for each in the expr loop. I was trying to
think through ways to have per-token states, but they felt sort of
bulky.
Note this is more verbose: but I think the long-term is going to be that
when we start wanting to add handlers, we're going to need to switch to
different names based on the token found. As a consequence, the parse
state logic will end up diverging a little, and we'll just want to align
towards boilerplate handlers.
Short-term, this opens up a path for saying that each parse node
corresponds to precisely one token in success states, and separates out
what were becoming big handler functions in check.
This is supporting a direction that all parse nodes should correspond to
a single token, allowing for reduced tokenized buffer access during
checking (it's still necessary for diagnostics, and some literals).
One of the justifications for a unified parse node was implementation
LOC: note this is slightly smaller, using macros to reduce some
duplication. While this does add more switching in HandleDeclScopeLoop,
that's offset by less explicit switching in the check handlers. Also, I
think the duplication in HandleDeclScopeLoop can be reduced by shifting
the flow there, which I'll do in a separate PR.
I was suggesting this because `FloatingPoint` is pretty long. `int` and
`float` should be familiar abbreviations. `unsigned` should be familiar
to developers too, but `UnsignedInt` still feels usefully clearer for
the additional chars.
This is an incremental improvement on our diagnostic messages that
simply underlines an entire token if the token is larger than 1 char
(else it points to the single char with a caret like it used to).
For now, we require the same introducer to be used each time a class is
declared, but see #3384.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
This removes a (very) hot branch in the lexer where we need to special
case when a token is the first token and can't look at its previous
token. It also seems like a generally nice change to the structure of
both the token buffer and parse tree as there are now bracketing
elements for both ends and we should be able to avoid similar branching
in the future.
Mostly mechanical updates to the lexer and parser code to handle this,
but also needed to special case the location information in the
autoupdate code. And then the usual large body of auto-updated tests.
No benchmark data for this change alone as in isolation and in the
current lexer structure it doesn't make a big difference. But this
branch was particularly difficult to handle when trying to update the
whitespace skipping code to be faster, and so I think it is worth
systematically avoiding the special case here.
Continuing with #3070. Just a dir and file rename (mostly removing
prefixes, although for parse_tree_fuzzer and parse_tree_file_test I'm
dropping "tree" instead of "parse"). Everything in the parse dir should
be marked as a move.
Nicholas Bishop
Geoff Romer
josh11bandJosh L
Jon Ross-Perkinsandjosh11b
David BlaikieandJon Ross-Perkins
Jacob Schneider
Chandler Carruth