Mainly because "sorting_diagnostic_consumer" is legacy, since
`SortingDiagnosticConsumer` became `SortingConsumer`. Also better
reflecting contents of these files.
Where I'm not renaming, I'm less positive about dropping "diagnostics"
from "file_diagnostics" and "null_diagnostics" (which contain both a
consumer and emitter, and "null.h" seems like poor naming), so not doing
that here. Also "diagnostic.h" contains `struct Diagnostic`, so is a
decent fit.
Assisted-by: Google Antigravity with Gemini 3 Flash
This is a bit of an experiment to see if there's a reasonable way to
write a shared enum type, rather than writing per-case wrappers for
things like `HasTypeQualifiers` or the printing. I think it's a bit
borderline complexity right now, but I'm not sure I can reduce it much
further.
This changes from things like `Internal::EnumClassName##RawEnum` to
`Internal::EnumClassName##Data::RawEnum` so that the enum entries can
have back references to bit shifts without needing to know the
containing type name. Because I'm trying to reduce duplication between
mask and non-mask enums, I did this to non-mask enums too.
This was motivated by #6035 adding another enum mask (which will grow
more entries, and is intended to switch if this is accepted), but I'm
not using that PR as a base here because I didn't want the merge
dependency.
Trying to build a type around the common idiom we have for types based
on an Id range. The primary advantage of this is it makes clear the `Id`
association, and drops the `.index` use.
Lowering was motivating me because it has a few of these, and check
probably has more (e.g. `tree_and_subtrees_getters`), but I'm just
changing a handful of examples to show the concept and see if there's
agreement.
I wanted to inherit from ValueStoreTypes, but name lookup didn't seem to
find the types without `using` statements, at which point there didn't
seem to be much reason to use inheritance.
`FindIfOrNull` returns a pointer to the element in the range if it's
found, and nullptr otherwise. `FindIfOrNone` returns a copy of the
element in the range if it's found, and `T::None` (for a range of
elements of type `T`) otherwise. `Contains` returns a bool indicating
whether the element in the range is found.
These functions replace `llvm::find()` and `llvm::find_if()` when you
want a single answer back instead of an iterator. This avoids the need
to check against `end()`, allowing the return condition to be tested as
a standard bool.
We replace uses of `find()` and `find_if()` that did not require an
iterator with these new helpers.
Note that the return type of `FindIfOrNull` is a pointer since we can
not write `optional<T&>`, which must be tested for null. If the null
check is omitted, UB occurs and the resulting code may end up with an
incorrect pointer (https://crbug.com/40153300) into the range (or
elsewhere), rather than a null dereference. And this would be very
confusing to debug. Hopefully debug builds and sanitizers keep this from
being an issue we sink a bunch of time into debugging.
Rules executed by bazel don't necessarily have the right environment to
find the symbolizer, which was the intent of `cc_env` setting
`LLVM_SYMBOLIZER_PATH`. So far, this has kind of been a case-by-case
fix, but every so often I'm trying to debug a crash in a test that
doesn't provide it. Rather continuing down this route, instead add
drop-in wrappers for cc rules so that it's hard to forget.
Note `bazel/cc_rules` is intended to mirror `bazel/carbon_rules` and
`bazel/cc_toolchains`, rather than `@rules_cc`.
AFAICT there isn't a great way to add this as a default for the `bazel
run` environment. It's not typically going to be set on its own,
forwarding `$PATH` would be too broad, and the [action
`env_sets`](https://bazel.build/docs/cc-toolchain-config-reference#using-action-config)
I think are not quite what we need (I think those don't include output
execution, only compilation).
At present, lower depends on `Check::SemIRDiagnosticConverter` for debug
info. That was to support a quick implementation of debug info, but
isn't great because it's both an unusual dependency on check's
implementation, and relying on diagnostic structures for debug info.
This cleans that up by splitting relevant logic out to a library in
sem_ir, and having lowering use sem_ir's library instead of check's.
Additionally, a small refactoring of `Parse::TreeAndSubtrees` to allow
getting locations in lowering without going through a `DiagnosticLoc`.
I'm adding `Parse::GetTreeAndSubtreesFn` in because it's a complex
signature to have in so many spots.
I chose to have `ResolveNodeId` return a `SmallVector` because it seemed
likely to be fairly compact, but that could also be using an optional
callback to handle resolved node IDs, possibly just returning the last
entry. This could be switched if preferred.
Note this change shouldn't affect behavior, it's just moving code
around.
---------
Co-authored-by: Chandler Carruth <chandlerc@gmail.com>
I'm looking at eliminating `DiagnosticConverter`. This change removes
`NodeLocConverter` (albeit adding `UnitAndImportsDiagnosticConverter`),
and in doing so, refactors lex conversion functions to extract them out
from the `DiagnosticConverter` functions.
I'll be following up with changes that collapse `DiagnosticConverter`
logic into `DiagnosticEmitter` locations. The intent is that we
shouldn't need separate ownership of both types.
This adds a RawStringOstream. Versus TestRawOstream, which is
consolidated over to RawStringOstream, it uses a string for storage
instead of a vector, mainly to support move-to-string semantics. Versus
llvm::raw_string_ostream, it owns the string and supports pwrite (which
is needed for driver and its fd_ostream compatibility requirement).
This converts most uses of llvm::raw_string_ostream, leaving behind a
few in InstNamer that explicitly cannot own the string, such as:
```
llvm::raw_string_ostream(name)
<< "_" << tree.tokens().GetColumnNumber(token);
```
I have this as its own library so that it can use CHECK.
Yes this doesn't save much code, but it's code we repeatedly write.
---------
Co-authored-by: Geoff Romer <gromer@google.com>
This change deliberately breaks away from the line/column ordering, and
instead focuses on a last byte offset corresponding to the final token
processed as part of producing the message. Where that's equal, this
maintains stable ordering in order to reflect the order that diagnostics
were produced.
The intent of this approach is that lex, parse, and check diagnostics
are interleaved based on where they are produced, but that
subexpressions still have diagnostics emitted prior to containing
expressions. In particular, the prior line/column sort essentially
sorted on the _start_ of where a diagnostic was associated, and this is
closer to sorting based on the _end_. As a consequence, something like
`F(1 2)` will have the error for `1 2` emitted _before_ a diagnostic for
`F(1 2)` not matching parameters, instead of _after_.
In check, we track the last handled node. This provides a
last_byte_offset _separate_ from where a diagnostic is associated. The
intent is that this creates an ordering of diagnostics which may be
associated with earlier code, to cause the diagnostics to be emitted
later. An example consequence of this is the change in ordering of
modifier diagnostics: we are diagnosing those from the same place, but
they have the same last_byte_offset, so we print them out in the order
produced.
I've added similar tracking to parse, but cannot identify any test which
is affected by it (note the separate commit, I thought about this late).
I'm not sure whether we have good out-of-order errors we could produce
for this.
A significant number of tests have reordered diagnostics as a
consequence of this change, so this change does not add further testing.
- Provide `Check::Dump(context, arg)` and similar.
- gdb and lldb should do contextual lookup, and `call Dump(*this,
Lex::TokenIndex::Invalid)` has been tested with gdb.
- Since this is only for debug, keeps the functions fully separated from
code.
- Uses alwayslink to ensure objects are correctly linked, even though
there are no calls.
- `-Wno-missing-prototypes` is needed when we don't have forward
declarations.
- Code is not linked in opt builds, using `#ifndef NDEBUG`.
- This probably could be doing something in BUILD files with a
`select()`, but the `#ifndef` seemed easier.
This is based on #4620, but uses free functions instead of member
functions.
Co-authored-by: Dana Jansens <danakj@orodu.net>
---------
Co-authored-by: danakj <danakj@orodu.net>
This is in anticipation of making the integer value store be customized
heavily. I'd like to extract it from the common code when doing that, so
first disentangling them here without any intended change in
functionality or behavior to enable that.
I've tried to update `#include`s to be as minimal as I can and added a
few missing includes spotted in the process.
I've split the test for value store to include what was easy focused on
just the value store templates rather than the unified shared value
stores.
This might surface some opportunities for adding more tests, but for
this PR, just doing the minimal restructuring.
This refactors the diagnostic kind coverage check into something that
also works for node kinds. Then, since this points out a few node kinds
that aren't having their parse verified, I'm adding minor tests for
those.
Note, this supports plurals, but doesn't apply it anywhere. I'm mainly
doing that to demonstrate the approach regarding syntax. See
format_providers.h for details.
Note in particular that this fixes an issue where SharedValueStore had
been shared across files, when they should be per-file. This is only
visible when doing multiple compilations in a single test, which was
rare before.
This also moves these tests into the Testing namespace. My memory of the
various namespacing changes is that we'd generally agreed to have tests
in Testing so that we'd see SemIR:: and similar, same as we would in a
lot of the implementation.
Move subtree sizes over to TreeAndSubtrees, using the different
structure to represent the additional parse work that occurs, as well as
making it clear which functions require the extra information. My intent
is to make it hard to use this by accident.
The subtree size is still tracked during Parse::Tree construction. I
think a lot of that can be cleaned up, although we use it during
placeholder assignment so it may take some work. I wanted to see what
people thought about this before taking action on such a change.
I'm using a 1m line source file generated by #4124 for testing. Command
is `time bazel-bin/toolchain/install/prefix_root/bin/carbon compile
--phase=check --dump-mem-usage ~/tmp/data.carbon`
At head, what I'm seeing is:
```
...
parse_tree_.node_impls_:
used_bytes: 61516116
reserved_bytes: 61516116
...
Total:
used_bytes: 447814230
reserved_bytes: 551663894
...
1.43s user 0.14s system 99% cpu 1.565 total
```
With `Tree::Verify` disabled completely, it looks like:
```
parse_tree_.node_impls_:
used_bytes: 41010744
reserved_bytes: 41010744
...
Total:
used_bytes: 427308858
reserved_bytes: 531158522
...
1.20s user 0.13s system 99% cpu 1.332 total
```
Re-enabling just the basic verification (what is now `Tree::Verify`),
I'm seeing maybe 0.05s slower, but that's within noise for my system. I
do see variability in my timing results, and overall I think this is a
0.2s +/- 0.1s improvement versus the earlier (always testing `Extract`
code) implementation. That's opt; debug builds will be unaffected,
because the same checking occurs as before.
Note, the subtree size is a third of the node representation, which is
why I'm showing the decrease in memory usage here.
Most of these are places where we failed to include a header file and
simply never got an error about this. The fix is to include the header
file.
Most other cases are functions that should have been marked `static` but
were not. Finding all of these was a main motivation for me enabling the
warning despite how much work it is.
One complicating factor was that we weren't including the `handle.h` for
all the state-based handler functions. While this isn't a tiny amount of
code, it is just declarations and doesn't add any extra dependencies. It
also lets us have the checking for which functions need to be `static`
and which don't. For the `parse` library I had to add the `handle.h`
header as well, I tried to match the design of it in `check`.
I have also had to work around a bug in the warning, but given the value
it seems to be providing, that seems reasonable. I've filed the bug
upstream: https://github.com/llvm/llvm-project/issues/94138
I also had to use some hacks to work around limitations of Bazel rules
that wrap `cc_library` rules and don't expose `copts`. I filed a bug for
`cc_proto_library` specifically:
~https://github.com/bazelbuild/bazel/issues/22610~https://github.com/bazelbuild/bazel/issues/4446
Instead of tracking the token associated with a parse node in the `.def`
file macro, track it on the typed node instead. List the token as a
field inside the node structure to show the order of the token relative
to the other components of the grammar production, and to allow the
token index to be accessed when the node is extracted.
Remove the corresponding information from the `.def` file, leaving
behind just a list of parse node kinds in the majority of cases.
This also removes the checking of the token kind associated with a parse
node in the case where the parse node has errors. Previously we had a
flag on the node kind to indicate whether we should check this, but per
[discord
discussion](https://discord.com/channels/655572317891461132/655578254970716160/1246214418979881052),
we have decided to remove this.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Mirroring #4003 for NodeCategory.
Note we template a lot more on NodeCategory's enum, so this is a
slightly more awkward delta.
Also, switch from Enum in KeywordModifierSet to RawEnumType for
consistency with EnumBase. The templating on NodeCategory had me
thinking about that more.
Since the addition of TranslateArg, I don't think this type is going to
go away (cutting a TODO). Refactoring names slightly to fit the current
role, and adding const to ConvertLocation.
I'd kept these in to separate the bazel module update from the BUILD
file changes, then forgot about it. I think all of these can be cleanly
removed now. I think it's something we should clean up for consistency
with the bazel central repository names; I think it's best to reduce
that divergence.
llvm_zlib and llvm_zstd remain because of how llvm depends on the
particular names.
This required adding a few headers that were found transitively before,
but not too many. This is sadly a fairly manual process of opening every
file in my IDE, but I think I got everything in `//common` and
`//toolchain`.
There are a few cases where technically we don't need `foo.h` to be
included into `foo.cpp`, but I've forced those to stay with a pragma.
I've tried to catch the places where we can cut deps in Bazel as well,
but not sure I got all of those.
I had been noticing these in other PRs and it seemed better to isolate
the change.
This is mirroring the structure of codegen/codegen.h, lower/lower.h, and
check/check.h. I recently did lex/lex.h, so parse/parse.h is the last.
Now, the directory's main API file is eponymous with the directory.
I could've used a friend function to avoid making the Tree constructor
public, but in other places we make less use of `friend`, just leaving
things public. This felt more consistent, and simple because it only
affects the constructor.
These are intended to allow the structure of a parse tree node to be
described more precisely in code, to support these use cases:
- Automated checking that the parse tree conforms to the expected
structure. (Added to `Tree::Verify`.)
- Easier reading and understanding of the structure of the parse tree by
toolchain developers. (See `parse/typed_nodes.h`.)
- Easier navigation of the parse tree, for example for tooling uses and
for use when forming diagnostics.
On this last point, an object representing the file may be inspecting
using `Tree::ExtractFile`, as in:
```
auto file = tree->ExtractFile();
for (AnyDeclId decl_id : file.decls) {
// `decl_id` is convertible to a `NodeId`.
if (std::optional<FunctionDecl> fn_decl =
tree->ExtractAs<FunctionDecl>(decl_id)) {
// fn_decl->params is a `TuplePatternId` (which extends `NodeId`)
// that is guaranteed to reference a `TuplePattern`.
std::optional<TuplePattern> params = tree->Extract(fn_decl->params);
// `params` has a value unless there was an error in that node.
} else if (auto class_def = tree->ExtractAs<ClassDefinition>(decl_id)) {
// ...
}
}
```
The `Extract...` functions collect the child nodes into the typed parse
node's fields (internally using a `Tree::SiblingIterator`) for easy
access. However, this is not as fast as directly observing the tree
structure using the postorder strategy being used by the check stage.
These functions rely on using struct reflection on the typed parse node
definitions from `parse/typed_nodes.h` to get the expected structure of
child nodes and then populate them.
Note that validating these in `Tree::Verify` adds significant cost to
it, and is currently included in the parsing stage. Without this change,
a 10 mloc test case of lex & parse takes 4.129 s ± 0.041 s. With this
change, it takes 5.768 s ± 0.036 s.
This builds upon and completes #3393.
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Co-authored-by: Chandler Carruth <chandlerc@gmail.com>
Another incremental change to diagnostic formatting. I simply recurse
over all the tokens in the subtree of a parse node and construct a
`DiagnosticLocation` that covers all of the tokens.
I believe it's nicer for the user to be directed at the entire chunk of
source where the error is occurring rather then just pointing at the
bracketing/terminator tokens, but let me know if you all agree.
As I was working on this, I noticed `import` and `library` syntax needs
to be fixed for how it imports the current package, and for `Main`
libraries. This mostly reflects the current state in its testing.
Otherwise, this should handle most of the errors I could think of:
dependency cycles, redundant imports, etc.
It does not actually deal with the nuances of cross-IR references.
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
This updates lexing to use the data. I'll do checking separately, just
to split changes.
Note the ValueStore structure is also set up such that SemIR::File can
use it for other fields.
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Can specify which tokens are allowed generally, and any additional
tokens that only occur when the parse node has an error.
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Previous code could fail silently, only caught with yaml output
mismatches. This uses ErrorOr to be explicit about the error detection;
recovery isn't supported because we should only print valid yaml (in
tests, at least).
Also moves the test helpers from //toolchain/base to
//toolchain/testing.
Switches tree_test to use the matchers so that, on mismatch, gtest
prints a path to the mismatch (the straight value means it was just
printing "not equal").
Addresses
https://github.com/carbon-language/carbon-lang/pull/3217#discussion_r1323586836
Specifically this should improve linking by producing one large binary
instead of one-per-directory. The inclusion of the driver hits the size
issue. Separating out things which have more llvm deps has been
discussed, but I'm not doing that here because I think the semantics
layer will need to depend on clang for interop, and we'd lose a lot of
the benefits that way. Also, having just one place to look seems
simpler.
Includes supporting changes to file_test infrastructure, the most
significant of which is probably passing tests via file instead of a
really large args thing, using a custom rule to do that. That's because
dealing with the layered filegroups that allow the toolchain setup is
more complicated, and this approach scales well.
Combined test time is ~9s, so not sharding right now.
I wasn't sure if people would prefer having the autoupdate script under
testing, so I left it alone for now.
Continuing with #3070. Just a dir and file rename (only prefix change is
lexer_file_test). Everything in the lex dir should be marked as a move.
Note, I think this closes#3070. There may still be further cleanup
later, but the organizational changes suggested there are being
completed.
---------
Co-authored-by: Chandler Carruth <chandlerc@gmail.com>
Continuing with #3070. Just a dir and file rename (mostly removing
prefixes, although for parse_tree_fuzzer and parse_tree_file_test I'm
dropping "tree" instead of "parse"). Everything in the parse dir should
be marked as a move.