https://carbon.compiler-explorer.com/z/88K9Kh5Wo shows the program
exiting with a garbage value copied from uninitialized memory.
This PR modifies `lower` to detect if the function lowered is the
entry point and doesn't specify a return type. If so, it emits
different LLVM IR to return int32 0, and modifies the lowered
function signature to match the int32 return type.
When initializing `.base` in class initialization, use `partial Base` as
the destination type rather than `Base`. Treat `partial Base` as not
being abstract even when `Base` is.
Allow conversion from a `partial T` initializer to a `T` initializer.
Store the vptr while performing the conversion. Do not store the vptr
when performing a `partial T` initialization, only when performing a
non-partial `T` initialization.
The primary change in this PR is to split the `Initializing` expression
category into separate `ReprInitializing` and `InPlaceInitializing`
categories, depending on whether initialization uses the types
initializing representation, or is guaranteed to be in place. It also
rationalizes and documents the SemIR-level semantics of those categories
(including where #5545's "ephemeral entire reference" category will
fit), and introduces two new inst kinds to close gaps exposed in the
process.
Some additional secondary changes:
- Consistently format the storage arguments of initializers with `to`,
regardless of whether initialization is in-place, and document the `to`
notation.
- Rename some inst kinds and functions, and restructure some of the
code, for clarity and consistency with the new documentation.
- Resolve a TODO to handle more category conversions in
`CategoryConverter`, in order to make it easier to reason about category
conversions.
See #6588 and the review history of this PR for background.
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
* Rename the type.
* Change lowering to lower FloatLiteralType values as the placeholder
`{}` value we use for literals instead of as an LLVM f64.
* Change eval to convert the type as part of a floating point
conversion, so that lowering can lower converted constants properly.
For now we still represent a value of FloatLiteralType as a
double-precision APFloat. (That will need to change so that we can
losslessly convert literals to f80 / f128 values, and so that we can
convert literals to f32 values without double-rounding.)
Some specific features:
* Use `SpecificFunction` for vtable entries for generic classes.
* Create specific constants for vtable entries in classes derived from
generic classes to reference the appropriate specific of the function
in the context of such a derived class.
* Create specific constants for vtable_ptrs for uses of specific generic
classes.
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
The goal was/is to reduce the overhead for vtables in generics - the
previous representation/prior to this patch caused a new vtable to be
created in every specific which isn't generally what we want for Carbon
generics (the whole specific/generic thing is meant to avoid creating
specific versions for things that can be a generic form parameterized by
a specific instead of manifest as a unique entity per specific)
So this moves vtables to a top level object (like functions, classes,
etc). Each dynamic class will have a vtable in this list.
Classes have a `vtable_ptr` instruction in them that points to the
vtable.
The actual generic support hasn't been implemented in this patch, as
I've been struggling with just getting this part of the migration going
& wanted to get it flushed out before adding the additional
complications.
It's possible more laziness when doing cross-file importing would be
suitable - for instance if we only need to reference the vtable from
another file, but don't need to know its individual contents, it may be
beneficial for the functions in the vtable to be import_refs (or to add
another layer of indirection - so it can be a single import_ref
all-or-nothing for the functions in the vtable).
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Co-authored-by: Carbon Infra Bot <carbon-external-infra@google.com>
Previously we created allocas for temporaries at whatever point in the
output LLVM function we'd reached. This would result in these being
dynamic allocas (performing a dynamic stack allocation), which is
inefficent and can lead to a stack overflow if it happens in a loop.
Switch to putting the allocas in the entry block instead, and instead
generate a lifetime start marker when we reach the point where the
temporary is introduced. We already did this for local variables; this
is just factoring out and reusing that code.
Update remaining parts of lowering, in particular the lowering of
aggregates, to handle lowering within a specific from a different file
than its generic. Look up information about a type in the current
specific and in its file rather than performing lookups for the type in
the generic and its file.
Remove or fix all remaining uses of raw `TypeId` in
lower/function_context and lower/handle*, so that the type from the
specific is consistently always used when lowering a specific function.
---------
Co-authored-by: Geoff Romer <gromer@google.com>
When lowering a specific function whose generic was defined in a
different file, switch to that other file's `FileContext` and lower the
generic there. Also pass the `FileContext` corresponding to the specific
into the `FunctionContext`, and use that `FileContext` for resolving
requests for constants and types from the specific.
`IRBuilderBase::SetInsertPoint` weirdly replaces our debug location with
one copied from the new insertion point, so undo its damage after
calling it.
Also included: a couple of cleanups I made while tracking this down.
Provide builtins for compound assignments instead of defining them in
the prelude as a use of a binary operator and an assignment. This allows
us to lower compound assignment directly to LLVM operations instead of
producing a function call. In the short term this also allows us to
define a type-generic compound assignment in the prelude.
Adds a `virtual_index` to `SemIR::Function` used to determine which
vtable slot
to use when calling the given function.
Then use that to lower the function call to use the vtable and
specifically the
relative vtable ABI to match the vtable entries.
Resolve instruction id depending on the context from which a function is
called.
Calling a function in a function context that does not have a definition
emitted before reaching lowering will cause a crash. This needs a change
in check/eval layer.
Noted CopyNameFromImportIR while glancing around (this one's interesting
because it's NameId, not void nor auto), did a scan just for a few other
cases. Not an exhaustive fix, and TBH assuming we'd prefer `auto ... ->
auto` since equivalent Carbon syntax would probably be `fn ... -> auto`
Also makes the style guide explicitly comment on void, but this was the
intent IIRC because it matches Carbon's `-> ()` (and "always" versus
"except for void", which we definitely went back and forth on).
Includes adjusting function pointers, which I definitely forget this
syntax works sometimes.
Excludes utils/tree_sitter/src/scanner.c because it claims to be C, but
really we should probably fix that to be cpp.
High level, replacing `Id::Invalid` with `Id::None` and `Id::is_valid`
with `Id::has_value` for clarity, as discussed
[here](https://discord.com/channels/655572317891461132/655578254970716160/1331664574545395794).
The `IntId` refactoring is needed together with `AnyIdBase` because it's
also used with `ValueStore`.
Note, trying to be careful not to rewrite `EnumBase::InvalidIndex`, or
`is_valid` in general (e.g., `IdKind::is_valid`).
I've tried to sequence commits here:
1. Automatic replacements:
- `((?:Id|Index)(?: |::|\(|Base(?:\(|::)))Invalid((?:Index)?\W)` ->
`$1None$2`
- `<invalid>` -> `<none>`
- `InvalidNodeId` -> `NoneNodeId`
- `/\*invalid\*/` -> `/*none*/`
- `id((?:_|\(\))(?:\.|->))is_valid` -> `id$1has_value`
2. Manual edits:
- In `int.h` and `int_test.cpp`
- `IntT` has `is_value`, which I'm renaming to `is_embedded_value`.
- Manual edits to comments in this file.
- `AnyIdBase` and `IdBase`
- Declaration of `is_valid` -> `has_value`, `InvalidIndex` ->
`NoneIndex`.
- In `ids.h` and `ids.cpp`
- `is_valid` -> `has_value`
- `// An explicitly invalid ID.` -> `// An ID with no value.`; similar
for index
- Various math on `InvalidIndex` -> `NoneIndex`
- Various mentions of "valid" in comments
- In `value_store.h`, for `IdT::Invalid`, plus one comment
- In `impl.h` and `tokenized_buffer.h`, we had different initialization
of `::None` values (versus `ids.h` syntax) that I fixed manually.
- Spot checks to compile
- Particularly where `is_valid` replacements didn't catch spots due to
different naming.
3. Autoupdate tests
4. verbose.carbon (NOAUTOUPDATE)
5. Comment spot checks
Note there are probably other mentions of "Invalid" that should be swept
up, but I'd like to argue for merging and separating out remaining
cleanup since this is so sweeping (and likely to hit merge conflicts
from churn). We'll probably have lingering mentions of "invalid" for a
bit regardless, just because there are uses of "invalid" in non-Id APIs.
Fixes integer builtins to produce the correct values (and not
CHECK-fail) when used on integer literals. Also adds impls to the
prelude to use the new builtins to perform operations on integer
literals.
Perhaps most importantly, this allows directly initializing `i32` values
with negative numbers, as the negation operation on integer literals now
works.
For testing I've added tests for use of literals with one operator in
each class (addition, multiplication, ordering, bitwise, etc) for which
there are distinct rules or overflow behavior, rather than exhaustively
testing all the combinations. This is aimed at finding a good tradeoff
between maintainability of the tests and thorough test coverage.
Also fixes lowering of heterogeneous shifts and comparisons. These are
currently disabled when one of the operands is an integer literal, but
we may want to allow that when the integer literal operand has a known
constant value.
Non-entry-block allocas will allocate new stack memory each time they're
reached, resulting in leaking stack memory over time for allocas in a
loop. Move all such allocas to the entry block instead, and use an LLVM
intrinsic to mark when the lifetime of the variable actually begins.
Actually presenting two options in this one review - if you look at the
specific
commits in this PR, the first commit represents my first attempt - and
if you
look at the overall PR change for the second attempt.
But I'm totally open to completely different approaches/ideas - these
were just
my rough guesses.
Generate declarations of specific functions on demand. Definitions are
not emitted yet, and I'm using a temporary, known-broken scheme for name
mangling.
This switches `DCHECK` and `FATAL` as well.
The goal is to reduce the code size impact of these assertions so that
we can keep more of them enabled. Currently, the largest cost I see from
`CHECK` is not the actual check or the cold code itself, but actually
the failure to inline trivial functions due to the presence of the cold
code. This means that our goal isn't to reduce apparent code size in the
final binary but the LLVM IR cost assessed for these routines in the
inliner, which closely correlates with code size but is a bit different.
As discussed in #4283, experimentation shows that a single function call
with a minimal number of arguments is the lowest cost model for these.
This is easily achieved with a format-string API that internally uses
`llvm::formatv`. This PR is essentially the `CHECK` version of #4283.
However, the check macros are substantially harder to make work with
both format strings and streaming because they also take a condition.
Also, unexpectedly, I was very successful at devising a regular
expression based automated rewrite from the streaming to the format
string form with only low 10s of manual fixes. This includes compacting
strings broken up across lines, etc. Given how well that went, I've
prepared this PR which just directly switches to the format string API
and migrate everything to use it.
One nice side-effect is that the format string approach ends up greatly
simplifying the implementation here as well.
This is ... *shockingly* effective. Parsing speeds up by more than 3%
with just this change. And checking speeds up by **8%** with this change
alone:
```
BM_CompileAPIFileDenseDecls<Phase::Parse>/256 86.3µs ± 1% 82.9µs ± 1% -3.94% (p=0.000 n=17+19)
BM_CompileAPIFileDenseDecls<Phase::Parse>/1024 431µs ± 1% 415µs ± 1% -3.76% (p=0.000 n=18+19)
BM_CompileAPIFileDenseDecls<Phase::Parse>/4096 1.77ms ± 1% 1.71ms ± 1% -3.18% (p=0.000 n=18+19)
BM_CompileAPIFileDenseDecls<Phase::Parse>/16384 7.44ms ± 1% 7.17ms ± 2% -3.56% (p=0.000 n=18+20)
BM_CompileAPIFileDenseDecls<Phase::Parse>/65536 30.7ms ± 1% 29.7ms ± 1% -3.15% (p=0.000 n=18+20)
BM_CompileAPIFileDenseDecls<Phase::Parse>/262144 131ms ± 1% 127ms ± 1% -2.81% (p=0.000 n=18+18)
BM_CompileAPIFileDenseDecls<Phase::Check>/256 878µs ± 2% 800µs ± 1% -8.91% (p=0.000 n=19+20)
BM_CompileAPIFileDenseDecls<Phase::Check>/1024 1.88ms ± 2% 1.72ms ± 1% -8.56% (p=0.000 n=19+20)
BM_CompileAPIFileDenseDecls<Phase::Check>/4096 5.78ms ± 2% 5.28ms ± 1% -8.70% (p=0.000 n=20+18)
BM_CompileAPIFileDenseDecls<Phase::Check>/16384 21.9ms ± 1% 20.1ms ± 1% -8.02% (p=0.000 n=18+20)
BM_CompileAPIFileDenseDecls<Phase::Check>/65536 90.4ms ± 2% 83.1ms ± 1% -8.04% (p=0.000 n=19+20)
BM_CompileAPIFileDenseDecls<Phase::Check>/262144 381ms ± 2% 352ms ± 1% -7.79% (p=0.000 n=19+19)
```
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Co-authored-by: josh11b <15258583+josh11b@users.noreply.github.com>
Seems to work with lldb ( https://pastebin.com/igKkNECm ), though gdb
has /some/ trouble with the paths (they aren't complete - just using the
filename directly, not providing the working directory - might be some
quick hacks that can help there).
Renames Lower::Handle* to Lower::LowerFunctionInst. This allows writing
a templated handler for instructions, moving code out of the macro
expansion and removing some of the redundancy in things like
`HandleAddrOf(..., SemIR::AddrOf inst)`
This adds `DefinitionInfo` for `Define`-based configuration so that
parameters are optional. It also makes it easier to provide the
equivalent functions on both `Definition` and `Define`.
A common pattern used here is to change from a `switch` with in-line
`case`s to instead have `case`s that call an overloaded function. What's
happening here is that the instruction type is used to select an
overload, and if an overload is not defined, a compiler error would
result. Meanwhile, clusters of overloads are being defined using
`requires`-based templating, so that equivalent implementations are not
copied. This addresses a limitation of a vanilla `switch` approach where
it's hard to have redundant cases using conditional logic, while also
getting compiler errors when adding new `InstKind` entries, which had
been a significant part of why we used macros previously.
This starts hitting some odd clang-format edge cases causing
`CARBON_KIND_SWITCH(inst){` (missing space), which I haven't seen
before. Adding `CARBON_KIND_SWITCH` to .clang-format works around it.
This works to leverage the capabilities of the hashtable as much as
possible, for example using the key context in the value stores.
However, there may still be opportunities to refactor more deeply and
use the functionality even better. Hopefully this is at least
a reasonable start and gets us a clean baseline.
On an Arm M1, this is a 15% improvement on my large lexing stress test,
but ends up a wash on my x86-64 server. This is a smaller benefit than
I expected, and it's because we're using a set-of-IDs and looking up
values with a key context for things like identifiers. This pattern has
a surprising tradeoff. The new hashtable uses significantly less memory,
a 10% peak RSS reduction just from the hashtable change. But indirecting
through the vector of values makes growing the hashtable dramatically
less cache-friendly: it causes growth to randomly access every key when
rehashing. On x86, everything gained by the faster hashtable is lost in
even slower growth. And even on Arm, this eats into the benefits.
But I have a plan to tweak how identifiers specifically work to avoid
most of the growth, and so I suspect this is the right tradeoff on the
whole. It gives us significant working set size reduction and we can
likely avoid the regressed operation (growth with rehash) in most cases
by clever reserving and if necessary by adding a hash caching layer to
the table infrastructure.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Make constant emission non-recursive, and stop building a bogus
FunctionContext to emit constants.
To support this, move `InstConstantKind` from the typed instruction
definition into the `.def` file, and add more macros to allow us to
generate case labels based on whether an instruction is a constant.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Co-authored-by: Carbon Infra Bot <carbon-external-infra@google.com>
First steps towards using constant values in lowering.
For now, we reuse the regular instruction lowering to lower constants.
This mostly works, because we don't actually need an `llvm::Function` or
a current basic block when lowering a constant most of the time.
However, a special case is needed for lowering aggregate value constants
because they would otherwise create a stack alloca to store the
constant. Separate constant lowering code will be added in a future
change to clean this up.
When lowering a constant initializing expression, the result is a value
of the destination type, rather than code to initialize the destination,
so a separate copy step is required when finishing initialization from a
constant for a type that uses in-place initialization. Handling this
required extending `ReturnExpr` to track its destination location.
We currently often create non-constant `*_access` SemIR instructions
that are only used by constant `*_init` instructions. These cause
lowering to leave behind `getelementptr` instructions in the lowered IR
that are now unused. It should be possible to detect this case and avoid
producing these instructions, or to produce them lazily, but for now
we're just leaving them around for LLVM to clean up.
Factor out `SemIR::InstNamer` and also use it when lowering to LLVM IR.
Automatically name all instructions created with our `IRBuilder` based
on the name computed by the `InstNamer`, and likewise name basic blocks
using the label generated by the `InstNamer`.
Move some of the existing naming logic out from lower into `InstNamer`
so that it's also used in SemIR. In particular, we now name call
instructions after their callee, or after the builtin name for calls to
builtins.
Computing and adding these names isn't completely free. This instruction
naming is designed to be optional, so that we can turn it off for builds
where the LLVM IR will only be converted to assembly and won't be seen
by a human, but so far it's enabled unconditionally. We can tune that
later as needed.
Similar to #3705, we actually have a mix of `Make` and `Create` in
factory functions too, so this PR is normalizing on `Make`. It's
intended to be consistent with the naming choice for Carbon factory
functions.
Note, MakeSyntheticBlock is the only one I feel a little weird about
because llvm's own APIs use Create, and this is essentially wrapping
LLVM calls. But the flipside is it also feels like a vague line to draw,
when we also differ from LLVM coding style in other ways.
This is a bit of a cleanup; I probably should've just renamed CrossRef
instead of adding ImportRefUsed.
Adding `is_builtin` to InstId is more about providing a standard API for
the check, which I expect to add a little more of.
Shifts import tests to validate that the BuildValueRepr CHECK isn't
accidentally hit.
These are manual fixes; mostly from clang-tidy, some from clangd (which
notes unused includes).
In typed_insts, adding inlline due to misc-definitions-in-headers. Per
discussion, clang-tidy is wrong, but inline silences it.
For parameter name skew in definition versus declaration, I'm just using
the name from the definition.
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Instead of ad-hoc conversion tracking on some kinds of nodes that
conversion creates, consolidate tracking into a single node kind. This
frees up an operand on `Init` instructions that can be used to store the
destination.
Adds a `BoundMethod` SemIR node to represent an `x.F` bound method, with
a new builtin type `BoundMethodType`. Reorganized conversion of call
expression arguments to also check and convert a `self` parameter in the
implicit parameters list.
In passing, improved diagnostics and error recovery for bad call
expressions. We now build a `call` node with the appropriate type and
value category, but with invalid arguments, if the argument conversion
failed, and diagnose calls to non-callable expressions.
`addr self` methods don't work properly yet; the `addr` is ignored for
now.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
1. In general, `semantics_ir` -> `sem_ir`, to match the directory name.
2. For the list of `ValueStore`-related accessors on `SemIR::File`, add
them to `check`'s `Context` object, shortening access.
Lucile Rose Nihlen
Richard Smith
Geoff RomerandRichard Smith
David BlaikieandRichard Smith
Alina Sbirlea
Jon Ross-Perkins
R B
Danial Klimkin
josh11b