When a `var` is not explicitly given an initializer, initialize it in
one of two ways:
* If its type implements the new interface `Core.Default`, call
`Core.Default.Op` to initialize it.
* Otherwise, if its type implements `UnformedInit`, leave it in an
unformed state. For now, this is always an uninitialized state, but that
will change in the future.
* If neither of those apply, the `var` declaration is ill-formed.
This is a step towards implementing leads decision #6739 and proposals
#257 and #5913.
Assisted-by: Gemini 3.1 Pro via Antigravity
---------
Co-authored-by: Geoff Romer <gromer@google.com>
This resolves a TODO in `expr_info.cpp` by using the inst kind rather
than the bound value to track the binding's category.
Since we're churning all the `bind_name` insts in testdata anyway, I'm
also taking this opportunity to align the inst naming with the design's
terminology, by calling these insts "bindings" (this aspect of the PR is
dependent on #6231 resolving an ambiguity in that terminology). For
consistency we'll need to rename several other insts as well (see the
TODO on `RefBinding`); I'm deferring that to a separate PR to minimize
the review load, but I think those name changes are in-scope for this
review.
For some of these, it's just replacing with min_prelude/none.carbon.
Some had min_preludes specified, and I'm generally switching those to
none.carbon as well. The one exception is the destroy.carbon test, which
I noticed because of #5678
People seemed receptive [on
#toolchain](https://discord.com/channels/655572317891461132/655578254970716160/1379196447827689553),
so proceeding.
For the two name conflicts, I've set it up so that there's a
"foo.carbon" and "foo_with_prelude.carbon", to indicate that the
no-prelude approach is preferred (with a shorter name).
Note min_prelude will require a little more work/thought, I want to
avoid adding `--custom-core` etc.
This could probably go further, but I'm just trying to get the ability
to run some significant tests without the prelude. This already requires
some migration of `i32` and `bool` to non-prelude-dependent types
(technically not at the moment, but I'm trying to stick with the
philosophical model of the prelude).
Note this undoes part of #3895 which had made all lex/parse tests depend
on the prelude -- I don't think that was a necessary change. Rather, it
seems better to isolate individual lex/parse tests from the prelude. I'd
been on the fence in that PR (it was fixing one of the issues that
contributed to wanting to not include the prelude), but now it feels
more consistent. The prelude could have a parse error and we shouldn't
break every parse test on that.
- Adds an empty prelude.carbon file
- Imports that file in any non-Core package file
- Adds --disable-prelude-import to avoid that
- Adds --exclude-dump-file-prefix to be able to hide files from dumping
- Used to hide core files (we can't do this by package name due to lex
dumps, for example)
- Restructures some tests to not rely on `i32`, particularly `alias`
tests (which rely on a name ref) and tests with no prelude.
I'm adding the framework for switching i32 to calling Int32 in the
prelude, but I'm running into a separate error actually switching over.
So that *mostly* works, but isn't quite ready for prime time. However,
maybe the current state of this PR is still useful to review since it
does a lot of the infrastructure work and adds the %Core everywhere?
Previously we used the default inst block formatting, which writes out a
parenthesized list of references, which would always be 'unexpected
instref's because nothing else prints the instructions in the decl
block.
In addition, track the decl block for function declarations like we do
for other kinds of declaration. This means that the parameter
declarations for a function are now properly rendered into the formatted
IR. Note that this adds a lot of verbosity to `function_decl`, but it
does accurately reflect the IR, and we'll probably want this information
to be printed once we start supporting more complex generic function
declarations.
This removes almost all the 'unexpected instref's in our formatted
output. There are remaining cases when a declarative scope contains
multiple blocks, where we only track one of those blocks. That happens
when there is control flow within declarative scopes, and for error
recovery when a class or interface or similar is defined more than once.
As requested in #3730.
By adding a constant to ClassDecl/InterfaceDecl, we're able to remove
name reference special-casing. Use TryEvalInst on the Decl to generate
the Type. For ClassDecl, then use the generated constant for
self_type_id.
`GlobalInit` block is now static block within a `SemIR` which will be
used to emit initialization instructions for variables in the `Package`
scope.
inst_block_stack now has additional methods to handle `GlobalInit` block
separately, this block can be popped without being finalized allowing to
accumulate between all instances of variables.
At the end of the `check` phase, if this block is not empty , the
function `__global_init` will be added with this block being inserted
into it.
This block is pushed to `inst_block_scope` at the end `BindName`,
allowing instruction to be emitted into it, then popped at the semicolon
(VariableDecl).
This significantly changes the `SemIR` output, that's why this commit
updates a lot of the test cases.
To avoid bouncing through `constant_values()` to determine whether a
type is symbolic or template, store the `ConstantId` on the `TypeInfo`
not just the `InstId`.
In addition to propagating the symbolic / template phase, this also
propagates whether a type contains an error, resulting in our no longer
producing types such as `<error>*` -- these now evaluate to simply
`<error>`. While this makes our types less precise after an error, it
also removes some follow-on diagnostics, so it seems to be an
improvement on the whole.
Building on #3636 which handles the general import case, add special
casing for namespaces. Namespaces can be combined cross-IR, so it's a
little more complex.
The implementation adds import_id to the Namespace instruction as a
reference to find the original using the normal structure. This is
achieved by moving the name_id to NameScope to free up space.
---
I considered a few alternatives...
I considered adding import_id to NameScope, but:
1. It's more consistent with things such as Function or Class that
provide name_id on the info object rather than the instruction.
2. I thought it more likely that there would be more NameScope cases
that might want a name_id rather than the import_id, since ImportRef
will typically be used.
I considered putting the import source (cross-ref IR id + inst id) on
the NameScope versus a separate ImportRef, which seems like the
strongest argument towards the NameScope approach because it removes an
instruction. That just felt inconsistent though, and the overhead of
instruction-per-imported-namespace should be low (theoretically few
namespaces should be used). Plus I feel a bit odd adding two
generally-unused ids to NameScope.
A specialized Namespace structure could also have been created to store
the import_id, but that would add an indirection to the NameScope.
Remove the type canonicalization mechanism and instead rely on constant
canonicalization to deduplicate types.
Rename the `Canonicalize*Type` functions to reflect that they're no
longer performing canonicalization. Switch code that creates types due
to semantic checking, rather than due to source syntax, to directly
create type constants through evaluation rather than creating an
instruction and evaluating it to produce a separate constant
representation.
The mapping from `const (const T)` that was previously performed by type
canonicalization is now implemented in expression evaluation instead.
The value `<error>` is now treated as a constant value, with a special
property that an instruction involving `<error>` that could possibly be
constant evaluates to `<error>`. This helps avoid producing follow-on
errors when an error occurs as a subexpression of an expression, such as
a type, that is intended to be constant.
Rather than producing multiple constants with the same value, fold all
instances of a given constant to the same constant instruction.
A future PR will use this to replace the current type canonicalization
system.
This is accomplished by tracking an extra bit on the ID we store in the
constant values table, and propagating that from subexpressions to the
enclosing expression. This extra bit is not yet computed correctly for
types; that will be addressed in later PRs.
---------
Co-authored-by: Chandler Carruth <chandlerc@gmail.com>
Form a side table with constant values for each instruction. Evaluation
is only supported for a few very simple kinds of instruction for now.
This is not observable outside of the SemIR output, because nothing
depends on expressions having a constant value phase yet.
Namespaces are copied, which means also adding their name to the
underlying instruction. It happened not to be done previously; the name
was only in name lookup.
Since the only import supported right now is the default import,
functionality is limited; in the future I'll need to deal with namespace
vs package conflicts.
Tests of namespace imports are under "namespace" -- I figured this would
be best for scaling as more instructions get support.
This also improves some debugging-related output that I was trying to
use while trying to build the support.
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Another incremental change to diagnostic formatting. I simply recurse
over all the tokens in the subtree of a parse node and construct a
`DiagnosticLocation` that covers all of the tokens.
I believe it's nicer for the user to be directed at the entire chunk of
source where the error is occurring rather then just pointing at the
bracketing/terminator tokens, but let me know if you all agree.
This creates a namespace for `package` scope.
It looks like names of class_decls in namespaces lead to an unexpected
instref. This is already true, as best as I can tell. I'm not sure if
there's a preferred approach to address that, so I've left a TODO for
now.
This removes the filename from the file-scoped block, and places it
above to make it clear where the full SemIR begins (with multifile,
providing a barrier between).
This is an incremental improvement on our diagnostic messages that
simply underlines an entire token if the token is larger than 1 char
(else it points to the single char with a caret like it used to).
Add a `NameId` that is effectively just a wrapper around a `StringId`,
with
some additional predefined values for names that don't correspond to
strings, such as the name of `self` or the function's return slot.
This replaces the use of `VarStorage` in this case.
Add an `UnboundFieldType` type as the type of a field, in cases where
it's referenced without an accompanying object.
Add a `BindName` node to describe the name binding performed for both
variables and fields so that we can handle them more uniformly.
Retain the `ClassDeclaration` node to represent a syntactic declaration
of a class (including possibly a declaration of a generic class), but
use a separate SemIR node to represent the class type itself. This
allows us to give the two separate treatment.
The `ClassDeclaration` is still entered into the name lookup table for
its enclosing scope, but when it is named in an expression, the class
type is produced instead. When the class declaration is named in a
declaration name, it can be used to define members of the class, but an
expression that resolves to the class type cannot be used to define
members of the class.
In order to distinguish these cases, use `Name` rather than
`NameExpression` for the left-hand side of a `QualifiedName` parse node.
This removes the only use of the `Expression` form of a declaration
name, so that is also removed.
In the future, `ClassType` will also be used to describe types such as
`Vector(T)`, for which there is no corresponding `ClassDeclaration`.
This includes being able to define a class that was previously
forward-declared, and being able to define a member function out-of-line
that was previously declared inside a class.
No support for fields or methods yet, and a class definition doesn't yet
cause the class to be treated as a complete type.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Incomplete types may be nested within other types; for example, a tuple
type might have an incomplete type as an element. Handle such cases by
walking through nested incomplete types when completing a type. This is
done non-recursively in case a very complex type is formed.
Types are generally no longer completed at the point where they're
formed. Instead, we attempt to complete a type when it is used in a
context that requires a complete type, and diagnose if the type cannot
be completed at that point. This will be necessary for classes, which
can become complete after their first use, and helps tease out bugs
where a type completeness check is missing.
Richard SmithandGeoff Romer
Jon Ross-Perkins
Dana Jansens
Gıyaseddin Tanrıkulu
josh11b
Jacob Schneider