Also clarify and enforce that `ConversionTarget::init_id` is used only
as storage for in-place initialization, and correspondingly rename it to
`storage_id`.
Give TupleLiteral and StructLiteral a constant value, if their contents
have constant values. Their constant values are TupleValue and
StructValue respectively. This supports their ability to convert to a
constant type (or facet type).
This way when deduce finds a TupleLiteral as the argument to a
_symbolic_ facet type, it can also find a constant value to use for that
argument. This allows deduction to move onto step two, where it can
substitute into the symbolic parameter from previous deduced arguments,
and then perform the conversion from the TupleValue to the desired facet
type.
Allow `PerformBuiltinConversion()` to convert from a canonical
TupleValue or StructValue to `type` instead of only from literals. Then,
also support conversion from a symbolic binding of type TupleType or
StructType to `type`.
This resolves a TODO in `expr_info.cpp` by using the inst kind rather
than the bound value to track the binding's category.
Since we're churning all the `bind_name` insts in testdata anyway, I'm
also taking this opportunity to align the inst naming with the design's
terminology, by calling these insts "bindings" (this aspect of the PR is
dependent on #6231 resolving an ambiguity in that terminology). For
consistency we'll need to rename several other insts as well (see the
TODO on `RefBinding`); I'm deferring that to a separate PR to minimize
the review load, but I think those name changes are in-scope for this
review.
For some of these, it's just replacing with min_prelude/none.carbon.
Some had min_preludes specified, and I'm generally switching those to
none.carbon as well. The one exception is the destroy.carbon test, which
I noticed because of #5678
People seemed receptive [on
#toolchain](https://discord.com/channels/655572317891461132/655578254970716160/1379196447827689553),
so proceeding.
For the two name conflicts, I've set it up so that there's a
"foo.carbon" and "foo_with_prelude.carbon", to indicate that the
no-prelude approach is preferred (with a shorter name).
Note min_prelude will require a little more work/thought, I want to
avoid adding `--custom-core` etc.
This could probably go further, but I'm just trying to get the ability
to run some significant tests without the prelude. This already requires
some migration of `i32` and `bool` to non-prelude-dependent types
(technically not at the moment, but I'm trying to stick with the
philosophical model of the prelude).
Note this undoes part of #3895 which had made all lex/parse tests depend
on the prelude -- I don't think that was a necessary change. Rather, it
seems better to isolate individual lex/parse tests from the prelude. I'd
been on the fence in that PR (it was fixing one of the issues that
contributed to wanting to not include the prelude), but now it feels
more consistent. The prelude could have a parse error and we shouldn't
break every parse test on that.
Use the complete location of the `as` conversion rather than the
location of the first operand, so diagnostics referring to the result
point at the whole thing.
- Adds an empty prelude.carbon file
- Imports that file in any non-Core package file
- Adds --disable-prelude-import to avoid that
- Adds --exclude-dump-file-prefix to be able to hide files from dumping
- Used to hide core files (we can't do this by package name due to lex
dumps, for example)
- Restructures some tests to not rely on `i32`, particularly `alias`
tests (which rely on a name ref) and tests with no prelude.
I'm adding the framework for switching i32 to calling Int32 in the
prelude, but I'm running into a separate error actually switching over.
So that *mostly* works, but isn't quite ready for prime time. However,
maybe the current state of this PR is still useful to review since it
does a lot of the infrastructure work and adds the %Core everywhere?
`GlobalInit` block is now static block within a `SemIR` which will be
used to emit initialization instructions for variables in the `Package`
scope.
inst_block_stack now has additional methods to handle `GlobalInit` block
separately, this block can be popped without being finalized allowing to
accumulate between all instances of variables.
At the end of the `check` phase, if this block is not empty , the
function `__global_init` will be added with this block being inserted
into it.
This block is pushed to `inst_block_scope` at the end `BindName`,
allowing instruction to be emitted into it, then popped at the semicolon
(VariableDecl).
This significantly changes the `SemIR` output, that's why this commit
updates a lot of the test cases.
Building on #3636 which handles the general import case, add special
casing for namespaces. Namespaces can be combined cross-IR, so it's a
little more complex.
The implementation adds import_id to the Namespace instruction as a
reference to find the original using the normal structure. This is
achieved by moving the name_id to NameScope to free up space.
---
I considered a few alternatives...
I considered adding import_id to NameScope, but:
1. It's more consistent with things such as Function or Class that
provide name_id on the info object rather than the instruction.
2. I thought it more likely that there would be more NameScope cases
that might want a name_id rather than the import_id, since ImportRef
will typically be used.
I considered putting the import source (cross-ref IR id + inst id) on
the NameScope versus a separate ImportRef, which seems like the
strongest argument towards the NameScope approach because it removes an
instruction. That just felt inconsistent though, and the overhead of
instruction-per-imported-namespace should be low (theoretically few
namespaces should be used). Plus I feel a bit odd adding two
generally-unused ids to NameScope.
A specialized Namespace structure could also have been created to store
the import_id, but that would add an indirection to the NameScope.
The constant value we associate with an initializing representation is
the object representation that the initializing expression will store to
its destination.
Also include the type in the profile of an instruction. This is now
necessary for array values, which are represented as tuple_value
instructions with array type, to avoid instructions with different types
being merged by constant canonicalization.
This is accomplished by tracking an extra bit on the ID we store in the
constant values table, and propagating that from subexpressions to the
enclosing expression. This extra bit is not yet computed correctly for
types; that will be addressed in later PRs.
---------
Co-authored-by: Chandler Carruth <chandlerc@gmail.com>
Form a side table with constant values for each instruction. Evaluation
is only supported for a few very simple kinds of instruction for now.
This is not observable outside of the SemIR output, because nothing
depends on expressions having a constant value phase yet.
Namespaces are copied, which means also adding their name to the
underlying instruction. It happened not to be done previously; the name
was only in name lookup.
Since the only import supported right now is the default import,
functionality is limited; in the future I'll need to deal with namespace
vs package conflicts.
Tests of namespace imports are under "namespace" -- I figured this would
be best for scaling as more instructions get support.
This also improves some debugging-related output that I was trying to
use while trying to build the support.
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
This creates a namespace for `package` scope.
It looks like names of class_decls in namespaces lead to an unexpected
instref. This is already true, as best as I can tell. I'm not sure if
there's a preferred approach to address that, so I've left a TODO for
now.
This removes the filename from the file-scoped block, and places it
above to make it clear where the full SemIR begins (with multifile,
providing a barrier between).
Instead of ad-hoc conversion tracking on some kinds of nodes that
conversion creates, consolidate tracking into a single node kind. This
frees up an operand on `Init` instructions that can be used to store the
destination.
Add a `NameId` that is effectively just a wrapper around a `StringId`,
with
some additional predefined values for names that don't correspond to
strings, such as the name of `self` or the function's return slot.
This replaces the use of `VarStorage` in this case.
Add an `UnboundFieldType` type as the type of a field, in cases where
it's referenced without an accompanying object.
Add a `BindName` node to describe the name binding performed for both
variables and fields so that we can handle them more uniformly.
Incomplete types may be nested within other types; for example, a tuple
type might have an incomplete type as an element. Handle such cases by
walking through nested incomplete types when completing a type. This is
done non-recursively in case a very complex type is formed.
Types are generally no longer completed at the point where they're
formed. Instead, we attempt to complete a type when it is used in a
context that requires a complete type, and diagnose if the type cannot
be completed at that point. This will be necessary for classes, which
can become complete after their first use, and helps tease out bugs
where a type completeness check is missing.
Using the computed value representation, fix lowering of struct and
tuple values to use the value representation rather than the object
representation. Fixes an issue found in the review of #3257.
This currently causes us to compute value representations of all types
as they are created, which generates substantially more SemIR to
represent types. We can get some of that back by deferring computation
of the value representation until the type is required to be complete,
but some of the additional cost here will persist with this approach.
I also considered making the computation of the value representation
type be something that lives entirely within the lowering phase, but I
think that's not the right approach in the longer term, because the
value representation will be semantically visible and relevant once we
start allowing it to be customized.
We should consider moving the nodes that exist to compute canonical
non-local types, including value representations, out into a separate
global block. That will clean up the SemIR representation substantially,
and make the SemIR produced for a function not depend on which types we
happen to have encountered beforehand. But that's not being done in this
PR.
---------
Co-authored-by: Chandler Carruth <chandlerc@gmail.com>
Also add `name_reference_untyped` for references to non-first-class
names without types, which currently covers namespaces and functions.
This improves the fidelity of the SemIR representation, and fixes some
issues where we would use the wrong location for nodes and diagnostics
downstream of a name reference.
We're still missing a representation for dotted name expressions, such
as `Namespace.Function`, and we don't use the `untyped` node as an
operand of any other node yet.
Combine the initialization, implicit conversion, and value category
conversion functions into a single function.
This substantially reduces the duplication between these steps, and
ensures that we support the same set of conversions in all these
contexts. This also fixes some issues where we would not use the proper
value representation for tuples and structs after performing implicit
conversions.
This implements initializing expression semantics for structs and
tuples, following #2006 and discussions since.
Tuple and (and analogously, struct) literals are treated as having a
mixed expression category that is later resolved based on how the
literal is used, as either a tuple initializer or a tuple value, at
which point we create a `TupleInit` or `TupleValue` that represents the
formation of the tuple initializer or tuple value from the tuple
literal.
There's quite a lot of TODOs here, and the SemIR representation is still
not quite right, but this seems like a good place to checkpoint some
incremental progress.
Building on #3214 and #3215, updates sem_ir yaml to be:
```
- filename: name
sem_ir: [ ... ]
```
Also, changes the textual format from `package { ... }` to `file
<filename> { ... }`. My thought on packages there is:
```
file "foo.carbon" {
package MyPackage
...
}
```
The reason for putting the file first is that it's easier if we put what
we're grouping on first, whereas the package is an "annotation" on the
file.
This better reflects the purpose of these semantics nodes, and prepares
for adding TupleValue and TupleInit nodes to represent forming values
and initializers from literals.
Continuing along with #3070. Note this is just a file rename, with BUILD
edits; every file previously in semantics/ should show as moved (except
maybe BUILDs, which split).
Geoff Romer
Dana Jansens
Jon Ross-Perkins
Richard Smith
Gıyaseddin Tanrıkulu
josh11b