When a class extends an interface, referring to a member name of the
interface as an unqualified name should refer to the class's
corresponding associated entity value, not to the associated entity
itself. Similarly, in an `impl`, unqualified names of associated
entities should refer to the `impl`'s corresponding value for that
entity.
To support this, we treat `impl`s as `extend`ing their implemented facet
type, and we make lookups into an extended facet type use the `Self`
type of the extending `impl` or `class` if lookup finds an associated
entity. We already did the latter if the extending entity was an
interface; this extends the existing support for these other cases.
The impl's body block has to end before we make its ImplDecl
instruction, and the witness instructions come later, so they don't end
up in the body block. Currently they just end up in the enclosing (file,
typically, or class) scope block.
Add a new InstBlockId to Impl for holding witness instructions, and
explicitly insert them into that block. Then include those instructions
into the scope of the Impl for naming, and format them into the Impl
right after the body block.
This is based on #6484
Instead of burying operations to pop the generic stack in
`GetOrAddImpl`, we move them up to handle_impl.cpp in `BuildImplDecl`,
which puts them at the same level as other operations on the generic
stack, like `StartGenericDecl` or `FinishGenericDefinition`.
To do so, we split `GetOrAddImpl` into a few pieces:
- `FindImplId` finds an existing Impl that matches the declaration, or
returns a LookupBucketRef and whether an error was diagnosed instead.
- `AddImpl` takes a fully built `Impl`, makes an `ImplId` for it, and
does additional steps for a new `Impl` verifying it and applying
`extend`.
- `AddImplWitnessForDeclaration` constructs the `Impl`'s witness, which
must be done between two generic steps in order to use the generic's
self specific but also add the witness instruction to the generic.
We group the logic to build the initial table in the definition and to
complete it in the definition together in `impl.cpp`. And we save a
lookup into the ImplStore by passing Impl by reference to
`FinishImplWitness`, as we now do for other similar functions in
`impl.h`.
This is based on #6470.
Propagate error state in an `extend impl` declaration out to the
enclosing scope. We can do this generically in `ApplyExtendImplAs` so we
don't have to do it explicitly in other places.
Collapse `DiagnoseExtendImplOutsideClass` into `ApplyExtendImplAs` as it
had only the one caller and is very small, so this simplifies the code,
making `ApplyExtendImplAs` a clear set of diagnostics. And push the
construction of the SpecificConstant down into `ApplyExtendImplAs` so it
is only constructed if it's needed, instead of constructing it and
throwing it away in error cases.
Ensure any error in the declaration results in the witness being an
ErrorInst so the impl will not be used in impl lookup. This simplifies
some branches by combining them into a single if statement.
This is part of #6420 which is being split up into a chain of smaller
PRs. It is based on #6467.
We encode the state of looking that the parent scope is a Class into a
type so that we can avoid extra lookups. Then use that in refactoring
where diagnostics are generated for an explicit `Self` in an `extend
impl` declaration.
We add tests that we don't double-diagnose the Self type when it's
already an error, and make the behaviour of `extend require` match that
of `extend impl as`.
This avoids some fragile/complex parse-node lookups (such as
`context.parse_tree_and_subtrees().ExtractAs<Parse::ImplTypeAs>`) by
using the parse node at the point where we are handling it instead of
much later.
This is part of #6420 which is being split up into a chain of smaller
PRs.
I was thinking about this for destruction, which I may not be able to
use it for, but still think this may be a good change to keep features
consistent.
Change impls from `<interface>.impl` to `<self>.as.<interface>.impl`,
and *member* functions to `<parent scope>.<fn>` (non-member functions
exclude their parent scope). Stop special-casing builtin functions,
given the new naming scheme.
The purpose of this is to make it clearer when a member function is
being accessed and, if so, which member function. In particular, we
often access interface `Op` functions. The builtin function
special-casing was intended to help with that, but we still have lots of
`Op` functions. This particular approach should make the interactions
clearer.
This changes up queueing of block IDs a little because, in particular,
we need to process bodies of entities only after constants finish
processing. But, it should also result in less memory usage during
processing because it means we have less on the insts stack at any given
time, since we track a block rather than all instructions contained by
the block.
Direct use of an error means we can delay looking at the actual type,
and also use the `self_id` of the stored `ImplInfo` directly.
Note, I'm assuming we should be okay with this not always being a
`NameRef`. In error cases though, it seems like we shouldn't mind it
being an error instead of a name reference to an error.
This drops file_test runtime from about 3s to 2.5s on my machine, which
is now ~30% faster than before #5653 slowed things down by adding a lot
of stuff to the production prelude.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Where `--no-dump-sem-ir` is used, change to `--dump-sem-ir-ranges=only`.
Otherwise, add `--dump-sem-ir-ranges=if-present` with a TODO to change
to `only`.
Note, SemIR is affected just because the extra comments change line
numbers in files where splits aren't in use.
This allows us to import the table for a given impl only once, while we
can import many ImplWitness instructions with different specifics for a
generic impl.
For example in convert_facet_value_to_narrowed_facet_type.carbon we see
that a single witness table is imported for the BitAnd interface, with
multiple witnesses (for different specifics) imported and sharing the
same table.
The ImplWitnessTable now contains a back-link to the Impl the witness is
for, allowing inst namer to name that interface in the textual semir,
and allowing the interface to be found when debugging from a witness.
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
In preparation for shifting from `TypeId`s potentially representing
attached types to always representing unattached types, using
[terminology suggested on
Discord](https://discord.com/channels/655572317891461132/963846118964350976/1359286326779973712).
This change causes us to track slightly more type spelling information
through SemIR.
One change that has significant impact on the SemIR output is that we
now build a `struct_type` instruction in each class representing the
types of the fields, including the spelling used for those types. This
is now no longer always identical to the corresponding canonical
`struct_type` for the object representation, so it's built separately
and owned by the class.
Also remove `TypeBlock` support entirely, as its only use was
representing `TupleType`s, which now use an `InstBlock`.
Instead of storing a `TypeId` that always refer to a facet type that
always contains exactly a single interface, store the interface
directly.
Also improve stringification of `LookupImplWitness` and witness access
into it, switching to using newly-added functionality for stringifying
specific interfaces.
A query facet type may contain multiple required interfaces, in which
case impl lookup should return an ImplWitness for an impl that is used
for each interface in the query. We bundle these together into an
instruction block and return that from impl lookup. The witnesses are in
the same order as the interfaces in the
`CompleteFacetType::required_interfaces`. This allows walking the
`required_interfaces` to find an interface to give an index that can
also be used to grab a witness from this set, or from FacetValue.
FacetValue now has an InstBlockId for the set of witnesses of the
FacetType, instead of a single ImplWitness instruction id.
FacetAccessWitness includes the index of the witness (determined from
the position in `required_interfaces`) of the witness it's accessing
from the FacetType.
The
toolchain/check/testdata/facet/no_prelude/fail_todo_call_combined_impl_witness.carbon
test demonstrates the fix in the resulting SemIR. We can see the calls
to methods on a multi-interface FacetType result in a FacetAccessWitness
with an index of the correct interface, and this results in a witness
that leads to the correct impl's function.
There is a TODO in member access, where it does not have a
`CompleteFacetType` yet, so it uses the index in
`FacetTypeInfo::impls_constraints` instead, but this can be incorrect in
the presence of named constraints, which when completed can add more
interfaces to the `CompleteFacetType` and which are sorted into an
arbitrary order with the rest there.
---------
Co-authored-by: josh11b <15258583+josh11b@users.noreply.github.com>
For an expression such as `(Type as Interface).AssocFn()`, track the
`Self` type `Type` in the result of the member access so that it's
available when checking the function call.
This introduces a new kind of type, `ImplFunctionType`, that represents
the type of a function that is expected within an impl, modeled as the
type of the function within the interface plus a value to use as `Self`.
Calls to values of this type behave like calls to the underlying
function except that the `Self` parameter is pre-bound to the self type
from the facet.
In order to support this, fix an issue where the imported list of
generic bindings lost their association with their enclosing generic.
This adds a little complexity to `import_ref`, including a new recursive
cycle that I intend to address in a follow-up PR.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Add a full entity representation for associated constants, and build a
`Generic` object for them. This `Generic` is parameterized by the
enclosing `Self` type, allowing the use of `Self` within the type of the
associated constant to be supported.
When performing impl lookup for an associated constant, produce the type
with the provided self type substituted for its `Self` along with any
generic parameters of the interface.
Split the handling of associated constant declarations into two parts,
corresponding to the code before the `=`, and the code between the `=`
and `;` (if any). The former goes into the generic declaration region;
the latter into the generic definition region. This prepares us to
handle the default value for an associated constant, but for now we're
just storing the information and not actually using it.
Remove the entity type field from `assoc_entity_type`, because it's
almost unused and is an attractive nuisance -- it must necessarily be a
type in the generic scope of the associated constant rather than in the
scope of the instruction (because there is no `Self` anywhere else),
which means that it's hard to substitute into or derive meaning from.
See `toolchain/check/testdata/impl/assoc_const_self.carbon` for tests of
the new functionality; these used to cause the toolchain to crash.
Add a Vtable typed inst with a type_id (of the type this vtable applies
to) and list of virtual function decls (or import refs to function
object constants).
This doesn't add lowering/emission of the vtable, or usage when
initializing objects of the type.
Some questions in case they're interesting to discuss:
* is it right/worth having the type_id in the vtable? (probably makes it
easier to emit - using the type to get the class name to figure out the
mangled name for the vtable) perhaps it should be a ClassId?
* I'm thinking the logic in CheckCompleteClassType could be the place we
handle diagnostics for mismatched keywords (virtual/abstract for a
function that's already virtual/abstract, maybe checking for non-virtual
functions with the same name in a base class, or derived class functions
without `impl`, etc) - but we could move some of that to the moment we
walk the function decl, and record our findings in the function decl
(record the base function it overrides, or the index of the vtable to
slot to use when building the vtable at the end of the class)
* the Vtable typed inst has `constant_kind = InstConstantKind::Always`
and `is_lowered = false`, I think I added that in to workaround/address
some failures in lowering. And seems correct for this intermediate step
- I'll add lowering in a follow-up patch. But the constant_kind - what
should this be? We can just say all vtables are of VtableType (in which
case the `Always` constant kind sounds right to me) or we could have
them introduce a type with each virtual function as a named member,
even?
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
When printing a Class, the complete_type_witness was printed last but
this gave a somewhat misleading representation as it appeared to be part
of the !members label. Move it above the label so that the label more
clearly refers to everything below it.
Include the index rather than the name in the fingerprint of a symbolic
binding. While both the index and the name contribute to the canonical
identity, using either one of them in the fingerprint is sufficient to
ensure that distinct entities get different fingerprints. Changing the
name of a symbolic binding should ideally not result in fingerprint
changes, so exclude the name from the fingerprint when we have an index.
Use the canonical type and constraint when fingerprinting an impl, so
that uses of names in `name_ref` instructions aren't considered, only
the entity the name resolves to, and different ways of spelling the same
type have the same fingerprint. This similarly allows compatible changes
to be made to impls without changing the fingerprint.
Exclude the declaration block when determining the fingerprint of a
declaration. The declaration block contains the declarations of
parameters of the declaration, which do affect whether two declarations
are identical, but not whether they denote the same entity, because it
would be invalid to have different declaration blocks for declarations
with the same name in the same scope. Therefore changes to the
declaration block are compatible, and it's useful for such changes to
not affect the fingerprint.
This is not easy to test in isolation with our current testing
machinery. However, a follow-on PR will change the name of a parameter
in the prelude, and with this in place, will not cause any changes to
occur elsewhere in the toolchain tests.
Use it in the instruction namer to make instruction names more stable
across unrelated changes to the toolchain or the prelude.
---------
Co-authored-by: Dana Jansens <danakj@orodu.net>
* Change `InterfaceWitness` -> `ImplWitness`
* Include a `SpecificId` in the `ImplWitness`. This allows the
`InstBlock` it contains to have its own identity, allowing it to be
changed as the impl is processed. Evaluation only updates the specific.
* Create the `ImplWitness` at the start of the impl definition. In the
future, this will be populated with the values of non-function
associated constants. For now, it starts full of invalid instruction
ids.
* Implements the model suggested in #4672 .
Note that the non-SemIR testdata changes are to these file:
* `toolchain/check/testdata/impl/lookup/fail_todo_undefined_impl.carbon`
* `toolchain/check/testdata/struct/import.carbon`
* `toolchain/check/testdata/tuple/import.carbon`
The last two are due to an import of generics bug exposed by this PR,
which will be fixed in a follow-on.
---------
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
This is a precondition for enabling the new pattern-matching subsystem
to support binding patterns that have `if` expressions in the type
position.
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Goal is to reduce churn in names in test updates (by churning a lot of
them in this PR).
---------
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
This seems slightly redundant for a locally-defined class, where there
will be a complete_type_witness instruction earlier in the class, but is
important for imported classes, where we're currently doing the wrong
thing in a way that's invisible in formatted SemIR.
The new `FacetValue` instruction represents `C as I` for some type `C`
and facet type `I`. It is named `FacetValue` instead of just `Facet` to
parallel the `FacetType` instruction.
This PR uses this instruction represent the facet value `Self` in an
`impl` declaration. This instruction will be used in the future to also
support things like:
* `C as I` where `C` is a class; and
* forming a specific for a generic with a `T:! I` parameter where `T` is
being given a concrete value.
(Here `I` is an interface or other non-`type` facet type.)
Also do some renaming and add some comments to make things a bit more
clear.
* `FacetTypeAccess` -> `FacetAccessType` to clarify this is not access
of a facet type, but access of the type of a facet
* `.facet_id` -> `.facet_value_inst_id` to parallel the `FacetValue`
instruction
`FacetAccessWitness` will be in a future PR.
---------
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
- Do not include entities imported from files that we are not dumping.
- Do not include constants and import_refs that are not referenced by
something that we are including in the formatted output.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Co-authored-by: Carbon Infra Bot <carbon-external-infra@google.com>
* The `extended_scopes` in a `NameScope` were represented by a
`NameScopeId`. Replace that with an `InstId` of an instruction returning
the type that is extending this name scope.
* `Context::LookupQualifiedName` now can take multiple scopes to look
in.
* `GetAsLookupScope` was moved out of `member_access.cpp` and is now
`Context::AppendLookupScopesForConstant`
This PR also fixes some existing issues that were revealed as part of
writing and testing this PR:
* Additional validation and handling of invalid ids.
* `extend impl` in a class is not properly imported yet, but at least
now it doesn't crash.
The change to use an `InstId` also allowed some diagnostics and
formatting to be improved.
---------
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
This does a few things:
* Replaces the single `TypeId` in the `FacetTypeInfo` struct with a
vector of `InterfaceId`, `SpecificId` pairs (sorted in id order)
representing the set of interface requirements of the facet type. This
will later be used to support facet types with multiple interface
requirements (as in `I & J` or `I where .Self impls J`).
* Replace `InterfaceType` instructions (used as the type of an
`InterfaceDecl` instruction) with `FacetType` instructions (introduced
in #4460) with a (newly introduced) `FacetTypeFromInterface()` function.
* Replace code that consumed `InterfaceType` values with code that
consumed `FaceType` values. I've generally left the assumption in the
code that it is dealing with a single interface, using the (newly
introduced) `FacetTypeInfo::TryAsSingleInterface`, and producing an
error otherwise. There isn't yet support for the `&` operator or `where
.Self impls`, so this is generally a good assumption for now, except you
can get a facet type with no associated interfaces from a `type
where`... expression. In some cases, the facet type value is pulled from
the evaluation of an `InterfaceDecl` instruction, where the single
interface assumption will hold permanently.
* Some related cleans up: nicer stringification and formatting of facet
types, suppression of some errors when there already was an error.
There is still a lot left to do, including:
* Type `type` should be a facet type with a reserved id, replacing the
built-in instruction.
* Code using `TryAsSingleInterface` should generally be upgraded to
handle more than (or less than) one interface. Name lookup should be
particularly exciting.
* Operator `&` should be defined on facet types, unioning their
interface and other requirements.
* Requirements from a `where` clause don't do anything yet.
* Impls and impl lookup need to resolve facet types, and do things like
determine if all the associated constants are given values.
---------
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
Co-authored-by: Geoff Romer <gromer@google.com>
This is in particular to avoid churn from changes such as #4370. I think
the import list can be helpful (particularly to understand what the
library is aware of), but it's a different trade-off for the prelude
package due to the implicit imports.
This PR makes it so that types can implement the `IndexWith` interface
so that they can provide their custom indexing behavior.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Also propagate the pattern IR along with the pattern-match IR, and use
it where appropriate.
Strictly speaking, some parts of the pattern-match IR are allocated
eagerly, while traversing the pattern's parse tree, but they still
aren't actually emitted until we traverse the associated pattern insts.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Introduces the `BindingPattern` and `SymbolicBindingPattern` insts, and
a separate stack of pattern blocks that they are emitted into. The
intent is to generate the corresponding pattern-matching insts (like
`BindName`) from them in a separate pass, but that is deferred to future
PRs.
See
[here](https://docs.google.com/document/d/1U_vQH17V893J9aF1LJXUnFYBNSs2MjKl4bJPaWCB2zo/edit?usp=sharing&resourcekey=0-w0xGYZ0An31Kpz-wvzSXwQ)
for the design this is based on, but note that during review we have
chosen to deviate from that design by putting the patterns in separate
blocks, and omitting the "forward references" from a `BindingPattern` to
its corresponding `BindName`. This in turn necessitates having separate
inst kinds for symbolic and non-symbolic binding patterns.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Add support for initializing types like `GenericClass(i32)` from a
struct literal. A new kind of instruction, `complete_type_witness`, is
added to the class definition to track the object representation type so
that it's visible to the generics machinery. Accesses to the object
representation of a class have all been updated to pass in the class's
`SpecificId` so that the types of the fields of the specific class are
used instead of the types of the fields of the generic class in places
that look at the object representation -- primarily class
initialization.
Instead of the `call` instruction having a block with one argument per
explicit argument, preceded optionally by `self` and followed optionally
by a return slot, change the `call` to store only the *runtime*
arguments. Store an index on the runtime parameters to make it easier to
determine the correspondence between arguments and parameters in a call.
Compile-time parameters, whether implicit or explicit, are no longer
included in the call argument list. Instead, they're tracked only in the
`specific_id` on the callee.
For calls to generic classes and generic interfaces, it no longer makes
sense to form a `call` instruction, given that the entirety of the
result is determined by the `specific_id`, which is now formed when
checking the call. Instead, the `call` instruction now only models
function calls, and not calls to other kinds of parameterized entity
names, and we create a `class_type` or `interface_type` instead of a
`call` instruction to model these kinds of calls. Notionally the model
here is that we're following the #3720 approach for calls, but for now
we inline the `Call.Op` function when forming SemIR.
We now also track the enclosing specific for a generic class or generic
interface that appears within an enclosing generic. This is necessary in
order for deduction of the inner generic parameters to not get confused
by the outer generic parameters being absent.
In order to not regress diagnostics, the template argument deduction
mechanism has been extended to specify the name of the parameter we're
deducing against when possible, and call arity mismatch errors are now
diagnosed before performing deduction rather than afterwards.
Richard Smith
Dana Jansens
Jon Ross-Perkins
Geoff Romer
Boaz Brickner
David Blaikie
Brymer MenesesandJon Ross-Perkins