Class vars are still restricted to simple `name: type` bindings, not
full patterns. This is now handled in the check phase instead of during
parsing.
This is in preparation for supporting `static var`.
This shifts logic a little so that empty top-level scopes are printed
less often. This affects imports mainly for now, but should be expected
to affect the soon-to-be-added generated scope more significantly.
Assisted-by: Google Antigravity with Gemini 3 Flash
`ImplWitnessTablePlaceholder` is the only non-type singleton instruction
(`ErrorInst` is a type; while `ImplWitnessTablePlaceholder` exposes
`TypeInstId`, it's only used as an `InstId`).
In order to allow simpler handling of singleton instructions, replace
`ImplWitnessTablePlaceholder::TypeInstId` uses with
`InstId::ImplWitnessTablePlaceholder`. Since the placeholder instruction
was never evaluated, this has no significant effect on behavior.
---------
Co-authored-by: Dana Jansens <danakj@orodu.net>
This defines `Cpp.void` as a custom type.
`Cpp.void*` is mapped to C++ `void*`.
Not supported yet: Conversions from and to other pointer types.
C++ Interop Demo:
```carbon
// main.carbon
library "Main";
import Core library "io";
import Cpp inline '''
#include <cstdio>
auto GetPointer() -> void* _Nonnull {
static int x = 8;
return &x;
}
auto GetValue(void* _Nonnull ptr) -> int {
return *static_cast<int*>(ptr);
}
''';
fn Run() -> i32 {
let ptr: Cpp.void* = Cpp.GetPointer();
Core.Print(Cpp.GetValue(ptr));
return 0;
}
```
```shell
$ bazel-bin/toolchain/carbon compile main.carbon
$ bazel-bin/toolchain/carbon link main.o --output=demo
$ ./demo
8
```
Part of #6280.
This change makes dumping and debugging work again with InstIds that are
now tagged with the CheckIRId. The textual representation of an InstId
is changed from `irN.instM` back to `instM` but the `M` is now a hex
value with the tag as part of it, which is the same number that is
physically in the `InstId::index` field. This prevents any cases where
we would potentially print incorrect values for large InstIds.
We teach the `dump` command in lldb to parse hex values for InstId so
that we can paste these numbers back into the debugger.
Use the `CheckIRId` as a unique identifier for the scope of an `InstId`
- if an `InstId` is created within the scope of one `CheckIRId` it must
not be used in the scope of a different `CheckIRId`.
This is achieved without extra storage, but with false negatives for
large inputs.
When an `InstId` is created, the original index of the `Inst` is XORed
with a tag derived from the `CheckIRId` to produce the final `InstId`.
When the `InstId` is used, the expected tag is XORed with the `InstId`
to get back to the original index - if the tags don't match, the
resulting index will be corrupted, likely too large - resulting in an
out of bounds index CHECK-failure.
(the tag value is derived as such:
* take the CheckIRId
* left shift one bit (padding zero)
* left shift another bit (padding 1 - used to signify that the resulting
`InstId` has a tag combined into it)
* reverse the bits
In this way, the tag is unlikely to overlap with the index for small
test cases - making it possible to separate out the `CheckIRId` from the
index in these cases to provide more meaningful debugging/CHECK
messages, and more informative `SemIR` textual dumping that can now
include the `CheckIRId` along with the `Inst`'s index in the name of an
`inst`)
The test churn here is improved printing as tagged `InstId`s can now,
with best effort (more likely for small test cases where the `CheckIRId`
and the `Inst` index aren't at risk of overlapping from the high and low
bits), render the `CheckIRId` as part of the inst's name. Going from
`instNN` to `irMM.instNN`.
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Right now, the class destroy impl is incorrectly generated (first
discussed [in
Discord](https://discord.com/channels/655572317891461132/941071822756143115/1418614787449032826)).
If we want it to be correct, deferred definition logic would need to be
added, and the declaration would need to be moved inside the `class`
scope (along with whatever generic logic that needs).
This instead switches to a blanket impl, to avoid creating latent bugs
with generating the `impl` and function body in the wrong scope. This
approach uses the same blanket impl as aggregate destruction that was
added by #6098.
The intent here is to allow progress on other parts of `Destroy`. For
example, under this model the implementation of the function body could
be done as part of lowering the specific.
If it's just `TypeType` then the `BindSymbolicName` appears directly in
type positions, but if it is replaced with another facet value, then we
would need to insert a `FacetAccessType` around it. By giving it a
`FacetType` type, like other `BindSymbolicName`s we make it consistent
and avoid having to introduce extra instructions.
We add a virtual node (`CompileTimeBindingPatternStart`) as the first
child of `CompileTimeBindingPattern` which holds the identifier
underneath it, so that it is checked just before the type expression of
the `CompileTimeBindingPattern`. When we reach this virtual node during
check, we add `.Self` as a name in the current scope, and when we reach
`CompileTimeBindingPattern` we remove it from scope, which ensures it's
present during only the checking of the type expression for the compile
time pattern.
At the moment the `.Self` has a different type (it's a `TypeType`) than
other `.Self` in the facet type (which are a single `FacetType`), but
the intention is to immediately substitute it out of the facet type
entirely, replacing it with a reference to the compile time binding (a
`BindSymbolicName`) itself. A TODO has been added for this.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
The self access is important; for the test `generic_class.carbon` being
added to `toolchain/check/testdata/class/destroy_calls.carbon`, it was
using `%T.as.Destroy` instead of `%D.as.Destroy`, indicating the default
blank impl was being used instead of the type-specific version. That
test is trying to focus on the issue, but the delta is visible in a
couple other files in this PR, for example
`toolchain/check/testdata/class/generic/init.carbon`.
I'm separately working on getting rid of the default impl, which is how
I noticed this.
I was thinking about this for destruction, which I may not be able to
use it for, but still think this may be a good change to keep features
consistent.
toolchain/check/testdata/builtins/char/basics.carbon and
toolchain/lower/testdata/builtins/char.carbon are probably the most
interesting tests here. The parse tests is required because this adds a
new node kind, and we need coverage of it; but the attached info is
minor. There's a fair amount of test churn here because I'm adding the
Core.Char and Core.CharLiteral types as new singletons.
My intent here is that `CharId` is always a unicode code point, even
when the type is a `Char` and thus must be a single UTF-8 code unit
(single byte). This mainly means the stored value of a `CharValue` can
be printed internally without knowing the type.
---------
Co-authored-by: josh11b <15258583+josh11b@users.noreply.github.com>
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Although this focused on `Destroy` support, some choices here around
`implicit_type_impls` are because copy/move will likely follow a similar
approach. I'm trying not to predict too much about how we'll structure
those, but I'm putting `Destroy` impl logic in a file that could perhaps
be shared with those. They'd likely be interested in similar things,
e.g. traversing members of types (particularly class, struct literal,
tuple literal).
At present this sets the destroy function as `no_op` which is consistent
with current logic, but has a TODO to correctly define.
Constant importing for functions changes slightly due to some issues I
was having with `GetFunctionType`. zygoloid suggested this approach to
avoid `EvalInst` logic.
Adds a flag for controlling whether to generating these impls. While
this does generation for `class`, as noted above this'll also need to be
done for tuples and struct literals, which would leave the `none.carbon`
min_prelude unable to use any types. Note if destruction *would* occur,
it'll still look up `Core.Destroy` for that and fail, but that's already
true of any test using `none.carbon`. I'm trying to use the flag to see
if we can keep `none.carbon` working mostly-consistently.
I'd tried separating out the flag to #5852, but that got a lot of
pushback over whether the behavior was appropriate. I'm hoping that the
interactions here make it clearer why the particular approach -- the
goal is not to enable advanced testing, or create some new end-user
behavior that we really support, it's just to keep no-prelude tests
functional. The main question raised there was why not just keep
generating `impl T as Core.Destroy` if `fn destroy` is present -- but I
think here it should be apparent that would require additional
complexity, as the generation of `impl T as Core.Destroy` is not
currently conditioned based on the implementation of `fn destroy`. I'd
rather add complexity to this flag only if it's enabling interesting
test functionality.
---------
Co-authored-by: Geoff Romer <gromer@google.com>
This drops file_test runtime from about 3s to 2.5s on my machine, which
is now ~30% faster than before #5653 slowed things down by adding a lot
of stuff to the production prelude.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Where `--no-dump-sem-ir` is used, change to `--dump-sem-ir-ranges=only`.
Otherwise, add `--dump-sem-ir-ranges=if-present` with a TODO to change
to `only`.
Note, SemIR is affected just because the extra comments change line
numbers in files where splits aren't in use.
This is making two inter-related changes:
- Change `file` to reuse the formatter logic of `constants` and
`imports`, meaning empty `file` scopes will be omitted
- Mark `<elided>` sections in blocks (not in non-block scopes, because
they're not as sequential)
Instead of building an eval block as a separate pass at the end of a
generic, build the eval block incrementally.
The larger change here is that asking for the type or constant value of
an instruction now always returns an unattached type or constant value,
in order to preserve the behavior that we previously achieved by doing
the rewrite to attached types and constant values at the end of handling
the generic.
This also incidentally fixes some subtle issues where attached types and
constant values would leak out into check and cause it to get confused
about differences between attached and unattached values. Check should
no longer see attached values except where it explicitly asks for them.
---------
Co-authored-by: Dana Jansens <danakj@orodu.net>
This was originally needed to support constant evaluation of name
expressions, but that's now done in a different way.
This is actually a step toward treating all patterns as constants. The
upcoming change will do so in a slightly different way, and so it will
simplify the review to start from a baseline where patterns are never
constant.
Right now, return_scope_stack is being used to determine whether logic
is in a function scope. However, we need to handle nested entities
inside function scopes. For example where this crashes right now:
```
base class C(B:! bool) {}
fn F() {
class B {
extend base: C(true or false);
}
}
```
This is doing a few things to make this kind of code not crash:
- Split `scope_stack().Push` into `PushForDeclName`, `PushForEntity`,
`PushForExpr`, and `PushForFunction` so that better decisions can be
made about behaviors.
- Hide `return_scope_stack` in the API, instead using interfaces to get
at the underlying data.
- Also using `PushForFunction` to update it similar to the other stacks
that `ScopeStack` manages.
- Add `IsInFunctionScope` as the best way to determine presence in
function scope.
- Remove `PeekIsLexicalScope` since destruction really wants function
scope information anyways.
- Clean up `destroy_id_stack` handling to be for function scopes rather
than lexical scopes.
- Return after related `context.TODO`s in a couple more spots, so that
code doesn't proceed to add control flow in spite of the lack of
support.
---------
Co-authored-by: Geoff Romer <gromer@google.com>
Provide builtins for compound assignments instead of defining them in
the prelude as a use of a binary operator and an assignment. This allows
us to lower compound assignment directly to LLVM operations instead of
producing a function call. In the short term this also allows us to
define a type-generic compound assignment in the prelude.
This allows us to import the table for a given impl only once, while we
can import many ImplWitness instructions with different specifics for a
generic impl.
For example in convert_facet_value_to_narrowed_facet_type.carbon we see
that a single witness table is imported for the BitAnd interface, with
multiple witnesses (for different specifics) imported and sharing the
same table.
The ImplWitnessTable now contains a back-link to the Impl the witness is
for, allowing inst namer to name that interface in the textual semir,
and allowing the interface to be found when debugging from a witness.
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
In preparation for shifting from `TypeId`s potentially representing
attached types to always representing unattached types, using
[terminology suggested on
Discord](https://discord.com/channels/655572317891461132/963846118964350976/1359286326779973712).
This change causes us to track slightly more type spelling information
through SemIR.
One change that has significant impact on the SemIR output is that we
now build a `struct_type` instruction in each class representing the
types of the fields, including the spelling used for those types. This
is now no longer always identical to the corresponding canonical
`struct_type` for the object representation, so it's built separately
and owned by the class.
Also remove `TypeBlock` support entirely, as its only use was
representing `TupleType`s, which now use an `InstBlock`.
Instead of using None, use an explicit ImplWitnessTablePlaceholder in
the witness table for entries that have not yet been populated, to aid
debugging. This would ensure they would show up very clearly in the
SemIR. This uncovered some `<invalid>` in the SemIR under erroneous
conditions that have now been turned into `<error>`.
Add the ImplWitnessAssociatedConstant instruction which wraps the
canonical instruction found from the constant value of the rewrite
constraint. This ensures that we have an instruction inside the eval
block for a generic impl declaration for each rewrite constraint's
value, which allows Subst to be performed to rewrite the symbolic
constant of the ImplWitnessAssociatedConstant instruction to associate
it with the generic. This will prevent the otherwise orphaned symbolic
constant of the rewrite's value from being used which can not have a
specific applied to them.
While applying the new insts in InitialFacetTypeImplWitness(), rearrange
the function to use less nesting. And avoid using entity names from
imported instructions (as we found is not effective in deduce.cpp) and
use a local instruction by going through the constant value.
This PR is part of the effort to allow a rewrite to name a generic
parameter, such as `impl forall [T:! type] T as Z where .X = T`, however
tests for this involve a final impl so that we can typecheck that the .X
value is a specific T, so the tests will come with that work. This piece
is split off because introducing new instructions causes a lot of SemIR
churn, and I wanted to get that done separately.
For each kind of instruction, specify whether its constant evaluation
needs an `InstId` or not. If it does, ensure that all constant
evaluation of that instruction provides one. Otherwise, allow calling
into the evaluator without providing an `InstId`.
This allows us to reliably use the `InstId` in evaluation steps that
either need a location or need to look at the original operands of the
instruction prior to evaluation, and also to support `TryEvalInst` calls
safely for instructions whose evaluation does not need an `InstId`.
When transforming instructions with symbolic constant values into the
eval block, we previously special-cased `bind_symbolic_name` (and
`symbolic_binding_pattern`) because they are places where symbolicness
is introduced, rather than propagated from operands, and just copied
them into the eval block. However, `bind_symbolic_name` can be dependent
on other symbolic constants, because it can have a type that is
dependent. In this case, the copy in the eval block would not have its
type properly adjusted to refer to the type within the eval block.
Fix this by performing substitution into `bind_symbolic_name` rather
than copying it directly, and instead, detect cases where substitution
determined that the instruction was unchanged despite having a symbolic
constant value, and force it to be rebuilt in that case.
I've not found any way that the previous behavior actually caused
problems, or affected the observable behavior of the toolchain. The type
of these instructions in the eval block doesn't make much difference to
anything because they get immediately replaced by their corresponding
argument values when we run the eval block. But this came up and caused
some test output churn when I was making a different change, and it
seems like a fix to our representation even if it's not changing
behavior, so I'm splitting it out so it can be handled separately.
Currently this test fails with trying to access a comptime function with
runtime values:
```
fn F() {
let a: J = {} as J;
let b: J = {} as J;
// CHECK:STDERR: fail_bit_and_values_no_impl.carbon:[[@LINE+7]]:3: error: non-constant call to compile-time-only function [NonConstantCallToCompTimeOnlyFunction]
// CHECK:STDERR: a & b;
// CHECK:STDERR: ^~~~~
// CHECK:STDERR: core/prelude/operators/bitwise.carbon:96:3: note: compile-time-only function declared here [CompTimeOnlyFunctionHere]
// CHECK:STDERR: fn Op[self: Self](other: Self) -> Self = "type.and";
// CHECK:STDERR: ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
// CHECK:STDERR:
a & b;
}
```
The issue is that the BitAnd impl for facet types is matching on any
value of any type:
```
impl forall [T:! type] T as BitAnd
```
What we really want is for it to match on facet types (which are type
values), which is written as:
```
impl type as BitAnd
```
After this change, the error makes more sense in the above test:
```
fn F() {
let a: J = {} as J;
let b: J = {} as J;
// CHECK:STDERR: fail_bit_and_values_no_impl.carbon:[[@LINE+4]]:3: error: cannot access member of interface `Core.BitAnd` in type `J` that does not implement that interface [MissingImplInMemberAccess]
// CHECK:STDERR: a & b;
// CHECK:STDERR: ^~~~~
// CHECK:STDERR:
a & b;
}
```
During SemIR, when identifying a specific in a specific context, we'd
have to either look through a specific or through a bound method.
Canonicalize which one to look through first, by having the BoundMethod
created around a SpecificFunction instead.
This changes a lot of check tests.
TODO: As the SemIr does not currently allow removal (access to insts()
is intentionally const), the bound instruction created prior to finding
the specific is not removed from the instructions.
Options: (1) leave as is, (2) add a way to remove the previous bound,
(3) rethink how/when the BoundMethod inst is created.
- Explicitly document that `*Param` and `*ParamPattern` insts represent
`Call` parameters.
- Stop wrapping compile-time parameter patterns in `ValueParamPattern`
insts (because they aren't `Call` parameters).
- Document how `MatchContext::results_` relates to the `Call`
parameters, and be more consistent about when it's written to.
- Remove `RuntimeParamIndex::Unknown`: we no longer need to distinguish
"this `Param`'s runtime index is unknown" from "this `Param` isn't a
runtime param", because we no longer use `Param`s at all in the latter
case.
- Rename `RuntimeParamIndex` to `CallParamIndex`.
As a side effect of removing the `ValueParamPattern` insts, this fixes a
minor diagnostic bug where `NoteInitializingParam` didn't identify the
specific parameter that led to a deduction failure, because it expects
generic parameters to only be represented by `SymbolicBindingPattern`s,
but before this change they could be wrapped in `ValueParamPattern`s.
Doing so results in TODOs in the resulting semir, since we don't handle
combining the facet types together properly or doing lookup into them.
There's a test added demonstrating this, which will be made to work in
followups.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
* Add `RequireCompleteFacetType` and `ResolveFacetTypeImplWitness` to
`check::Context`. Goal was to move code from `impl.cpp` (mostly) without
functional changes.
* Complete type information is cached with the facet type, and is stored
in a `complete_facet_types()` table.
* Main functional change is to diagnose attempts to use a rewrite
constraint on an associated function. Some existing diagnostics have
been updated.
* Remove `check::Context::RequireDefinedType`:
* For class types, use `RequireCompleteType`
* For facet types, use `RequireCompleteFacetType`
* Introduce a `SemIR::SpecificInterface` to hold an interface and
specific id pair.
* Keep the specific interface ids in the impl object.
* Avoid some extra copies in `Dump` functions.
* Future work missing from this PR:
* Resolving for member access or actions that require impl lookup.
* Resolving rewrites constraints that refer to non-concrete values.
* Any support for adding implied constraints that result from a `where`
clause (though TODOs have been added).
---------
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Co-authored-by: Dana Jansens <danakj@orodu.net>
For an expression such as `(Type as Interface).AssocFn()`, track the
`Self` type `Type` in the result of the member access so that it's
available when checking the function call.
This introduces a new kind of type, `ImplFunctionType`, that represents
the type of a function that is expected within an impl, modeled as the
type of the function within the interface plus a value to use as `Self`.
Calls to values of this type behave like calls to the underlying
function except that the `Self` parameter is pre-bound to the self type
from the facet.
In order to support this, fix an issue where the imported list of
generic bindings lost their association with their enclosing generic.
This adds a little complexity to `import_ref`, including a new recursive
cycle that I intend to address in a follow-up PR.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
High level, replacing `Id::Invalid` with `Id::None` and `Id::is_valid`
with `Id::has_value` for clarity, as discussed
[here](https://discord.com/channels/655572317891461132/655578254970716160/1331664574545395794).
The `IntId` refactoring is needed together with `AnyIdBase` because it's
also used with `ValueStore`.
Note, trying to be careful not to rewrite `EnumBase::InvalidIndex`, or
`is_valid` in general (e.g., `IdKind::is_valid`).
I've tried to sequence commits here:
1. Automatic replacements:
- `((?:Id|Index)(?: |::|\(|Base(?:\(|::)))Invalid((?:Index)?\W)` ->
`$1None$2`
- `<invalid>` -> `<none>`
- `InvalidNodeId` -> `NoneNodeId`
- `/\*invalid\*/` -> `/*none*/`
- `id((?:_|\(\))(?:\.|->))is_valid` -> `id$1has_value`
2. Manual edits:
- In `int.h` and `int_test.cpp`
- `IntT` has `is_value`, which I'm renaming to `is_embedded_value`.
- Manual edits to comments in this file.
- `AnyIdBase` and `IdBase`
- Declaration of `is_valid` -> `has_value`, `InvalidIndex` ->
`NoneIndex`.
- In `ids.h` and `ids.cpp`
- `is_valid` -> `has_value`
- `// An explicitly invalid ID.` -> `// An ID with no value.`; similar
for index
- Various math on `InvalidIndex` -> `NoneIndex`
- Various mentions of "valid" in comments
- In `value_store.h`, for `IdT::Invalid`, plus one comment
- In `impl.h` and `tokenized_buffer.h`, we had different initialization
of `::None` values (versus `ids.h` syntax) that I fixed manually.
- Spot checks to compile
- Particularly where `is_valid` replacements didn't catch spots due to
different naming.
3. Autoupdate tests
4. verbose.carbon (NOAUTOUPDATE)
5. Comment spot checks
Note there are probably other mentions of "Invalid" that should be swept
up, but I'd like to argue for merging and separating out remaining
cleanup since this is so sweeping (and likely to hit merge conflicts
from churn). We'll probably have lingering mentions of "invalid" for a
bit regardless, just because there are uses of "invalid" in non-Id APIs.
Changes the name of SemIR `import_ref`s to use the format
`<package>.<entity>`.
<table>
<tr><th>Before</th><th>After</th></tr>
<tr>
<td><code>%import_ref.05a: type</code></td>
<td><code>%Main.D: type</code></td>
</tr>
<tr>
<td><code>%import_ref.8f2: <witness></code></td>
<td><code>%Main.import_ref.8f2: <witness></code></td>
</tr>
</table>
* [Discord discussion in
#toolchain](https://discord.com/channels/655572317891461132/655578254970716160/1330253540999827577)
* Closes#4769
This removes some churn when adding new diagnostic cases to test files
(where previous to this change the newly added newline would cause the
previous diagnostic CHECKs to be updated including changes to the line
number because the CHECK for the blank line meant an extra line between
CHECK and source line).
A few alternatives discussed here:
https://discord.com/channels/655572317891461132/655578254970716160/1329573358475673723
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Add a Vtable typed inst with a type_id (of the type this vtable applies
to) and list of virtual function decls (or import refs to function
object constants).
This doesn't add lowering/emission of the vtable, or usage when
initializing objects of the type.
Some questions in case they're interesting to discuss:
* is it right/worth having the type_id in the vtable? (probably makes it
easier to emit - using the type to get the class name to figure out the
mangled name for the vtable) perhaps it should be a ClassId?
* I'm thinking the logic in CheckCompleteClassType could be the place we
handle diagnostics for mismatched keywords (virtual/abstract for a
function that's already virtual/abstract, maybe checking for non-virtual
functions with the same name in a base class, or derived class functions
without `impl`, etc) - but we could move some of that to the moment we
walk the function decl, and record our findings in the function decl
(record the base function it overrides, or the index of the vtable to
slot to use when building the vtable at the end of the class)
* the Vtable typed inst has `constant_kind = InstConstantKind::Always`
and `is_lowered = false`, I think I added that in to workaround/address
some failures in lowering. And seems correct for this intermediate step
- I'll add lowering in a follow-up patch. But the constant_kind - what
should this be? We can just say all vtables are of VtableType (in which
case the `Always` constant kind sounds right to me) or we could have
them introduce a type with each virtual function as a named member,
even?
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
When printing a Class, the complete_type_witness was printed last but
this gave a somewhat misleading representation as it appeared to be part
of the !members label. Move it above the label so that the label more
clearly refers to everything below it.
Include the index rather than the name in the fingerprint of a symbolic
binding. While both the index and the name contribute to the canonical
identity, using either one of them in the fingerprint is sufficient to
ensure that distinct entities get different fingerprints. Changing the
name of a symbolic binding should ideally not result in fingerprint
changes, so exclude the name from the fingerprint when we have an index.
Use the canonical type and constraint when fingerprinting an impl, so
that uses of names in `name_ref` instructions aren't considered, only
the entity the name resolves to, and different ways of spelling the same
type have the same fingerprint. This similarly allows compatible changes
to be made to impls without changing the fingerprint.
Exclude the declaration block when determining the fingerprint of a
declaration. The declaration block contains the declarations of
parameters of the declaration, which do affect whether two declarations
are identical, but not whether they denote the same entity, because it
would be invalid to have different declaration blocks for declarations
with the same name in the same scope. Therefore changes to the
declaration block are compatible, and it's useful for such changes to
not affect the fingerprint.
This is not easy to test in isolation with our current testing
machinery. However, a follow-on PR will change the name of a parameter
in the prelude, and with this in place, will not cause any changes to
occur elsewhere in the toolchain tests.
This change deliberately breaks away from the line/column ordering, and
instead focuses on a last byte offset corresponding to the final token
processed as part of producing the message. Where that's equal, this
maintains stable ordering in order to reflect the order that diagnostics
were produced.
The intent of this approach is that lex, parse, and check diagnostics
are interleaved based on where they are produced, but that
subexpressions still have diagnostics emitted prior to containing
expressions. In particular, the prior line/column sort essentially
sorted on the _start_ of where a diagnostic was associated, and this is
closer to sorting based on the _end_. As a consequence, something like
`F(1 2)` will have the error for `1 2` emitted _before_ a diagnostic for
`F(1 2)` not matching parameters, instead of _after_.
In check, we track the last handled node. This provides a
last_byte_offset _separate_ from where a diagnostic is associated. The
intent is that this creates an ordering of diagnostics which may be
associated with earlier code, to cause the diagnostics to be emitted
later. An example consequence of this is the change in ordering of
modifier diagnostics: we are diagnosing those from the same place, but
they have the same last_byte_offset, so we print them out in the order
produced.
I've added similar tracking to parse, but cannot identify any test which
is affected by it (note the separate commit, I thought about this late).
I'm not sure whether we have good out-of-order errors we could produce
for this.
A significant number of tests have reordered diagnostics as a
consequence of this change, so this change does not add further testing.
Nicholas Bishop
Geoff Romer
Jon Ross-Perkins
Boaz Brickner
David BlaikieandRichard Smith
Alina Sbirlea
Calvin