Fixes link failures when referencing a symbol involving a fingerprint
from a different package.
Previously we included the `Namespace`'s `import_id` as part of its
fingerprint, which caused local and imported namespaces to get different
fingerprints. We now store the `import_id` on the `NameScope` instead of
on the `Namespace` inst to avoid this problem.
Also, when we reach a package-level `NameScopeId`, consistently
fingerprint it as a (package name, library name) pair. Previously the
fingerprinting depended on whether it was imported or not, as an
imported `NameScopeId` had a parent scope (the current package). We need
to include the library name here so that private entities with the same
name in different libraries have different fingerprints.
See
[here](https://docs.google.com/document/d/1rWcueFwIfZox6GKVGxiUG4cBzjrZ6djXiIDGyJDtrE4/edit?tab=t.0)
for the design doc.
This also removes the default value of the `result_type_inst_id`
parameter of `HandleAction`, moves it before the action in the parameter
list, and documents it. This solves two problems:
- The default made it easy to forget, leading to unnecessary
`TypeOfInst` instructions.
- When it was present, putting it after the fairly "bulky" action
argument tended to make the callsite harder to read.
This is only fixing the decision about *whether* to produce a witness.
Implementation of the witness is still a TODO, though where a body is
generated, it should also precisely reflect where one _needs_ to be
generated.
Note the tests:
- toolchain/lower/testdata/function/generic/import_core_witness.carbon
- toolchain/lower/testdata/function/generic/import_unused_def.carbon
These tests can probably be produced _without_ Core.Destroy, but I found
the essence of them while trying to build //examples with Core.Destroy
and a simpler minimization wasn't striking me.
Assisted-by: Google Antigravity with Gemini
---------
Co-authored-by: jonmeow <jperkins@google.com>
EvalOrAddInst has to create a non-canonical instruction for evaluating a
few typed insts, such as LookupImplWitness which uses an InstId to
provide a location for diagnostics.
But the output of the function is a ConstantId. We do not have access to
the non-canonical InstId after the function returns. But if the constant
value was symbolic, it was being attached to the inst, and the inst
would be added to the eval block of the enclosing generic. This
needlessly added semir for a symbolic value.
The ConstantId returned by EvalOrAddInst can be used immediately, such
as to evaluate an ImplWitnessAccess. In that case, the final evaluated
result is all we need to keep in semir.
If the ConstantId needs to be replaced by specifics, it is only as part
of some other instruction, since ConstantIds themselves are not modified
by specifics, instructions are. In that case, the canonical instruction
in the constant value would have been added to some other (now symbolic)
instruction, which would be replaced by a specific.
This has no functional change, but it reduces runtime overhead and semir
output for LookupImplWitness and ImplWitnessAccess.
Performing a lookup against `Self` inside the definition of the named
constraint leads to cycles, as described in the document [Self
contradictions in Named
Constraints](https://docs.google.com/document/d/17rn2XmME8o2MM4OJqatSVuMa1iYZ1PAgcNrf0PXR9Q4/edit?tab=t.0).
To prevent those cycles, this change introduces a large refactoring of
impl lookup.
The impl lookup done inside eval is reduced to only performing
monomorphization. That is it:
- Only looks for an provides final witnesses.
- Is not allowed to identify the facet type of the query self.
- Returns either a final witness or None (or an error)
The paths for finding non-final witnesses are now done outside of eval,
directly in the initial `LookupImplWitness()` function. If no final
witness it found through eval, the resulting non-final
`LookupImplWitness` instruction witness is returned. It does not produce
cycles to identify the facet type of query self outside of eval, since
that does not result in repeating the identification when resolving
specifics of the named constraint or require decl.
Move the ArrayStack for Context::require_impls_stack into a new class
which tracks a NamedConstraintId (or InterfaceId) for each frame of
RequireImplsIds, so that in type completion we always can find the
correct frame for a given named constraint which is still being defined,
in order to find the RequireImplsIds in the in-progress definition.
The `CompleteTypeWitness` can be concrete. This avoids making a symbolic
`CompleteTypeWitness` value which itself has a concrete
`CompleteTypeWitness` value with the same operands.
When a `var` is not explicitly given an initializer, initialize it in
one of two ways:
* If its type implements the new interface `Core.Default`, call
`Core.Default.Op` to initialize it.
* Otherwise, if its type implements `UnformedInit`, leave it in an
unformed state. For now, this is always an uninitialized state, but that
will change in the future.
* If neither of those apply, the `var` declaration is ill-formed.
This is a step towards implementing leads decision #6739 and proposals
#257 and #5913.
Assisted-by: Gemini 3.1 Pro via Antigravity
---------
Co-authored-by: Geoff Romer <gromer@google.com>
This is iterating on how `Destroy.Op` generates, to start adding body
capabilities. This changes the way the signature is created, and adds a
`CoreWitness` function kind so that mangling can prevent name
collisions. The result is that what _was_ `DestroyOp` is now
`Core.Destroy.Op` or, as can be seen in
toolchain/lower/testdata/interop/cpp/nullptr.carbon,
`_COp.<hash>:core.Destroy.Core` where `:core` is indicating that it's a
core witness (taking a note from `:thunk`).
Assisted-by: Google Antigravity with Gemini 3 Flash
Introduces `Context` and `SoftContext` messages, which can be introduced
through a `ContextBuilder`:
- The `Context` messages come before the diagnostic in the output.
- The first `Context` message steals the diagnostic level from the main
diagnostic, and turns the main diagnostic into a Note attached to the
context.
- A `SoftContext` message works similarly, but if it's preceeded by a
`Context` or `SoftContext` message, then it is dropped. This can be used
as a default/backup scope when nothing more interesting is provided up
the stack, such as in `TryEvalBlockForSpecific`.
The `ContextBuilder` is provided to a callback through
`Diagnostics::ContextScope`, an RAII type `AnnotationScope` but for
context messages.
This allows a high level operation to provide a context message like
"failed to identify facet type {0}" which will then be used as the error
if a diagnostic is produced during identification, with the latter
diagnostic attached as a note to explain why the contextual operation
failed.
In particular, this allows monomorphization errors (such as an array
bound being negative) to be attached to a higher lever operation instead
of being top-level diagnostics themselves, with the monomorphization
site being a note. This inverts the source code locations that appear in
the diagnostic, so that the top-level diagnostic points to the "user
code" which causes the monomorphization.
This is presented as an alternative strategy to #6753, which plumbed
diagnoser callbacks around to achieve the same goals.
We replace the diagnoser callbacks in type completion and operators with
ContextScope callbacks instead, which now provide better diagnostics for
monomorphization errors. Other callers to MakeSpecific do not yet have
ContextScopes introduced in order to turn monomorphization errors into
more interesting diagnostics.
Implementation of unused pattern bindings #2022, continued.
Whereas previous PR #6460 took care of parsing, and PR #6479 prepared
the stage by using _ in some test cases, this PR has the the actual
implementation, using a simple dataflow analysis.
---------
Co-authored-by: Burak Emir <bqe@google.com>
Co-authored-by: jonmeow <jperkins@google.com>
Currently each interface has a `Self` facet internally that becomes a
binding to every entity inside the interface: associated constants,
functions, and require decls. Each of these has to be independently
generic as a result. This makes is challenging in extended name lookup
to move into an extended scope of an interface, as we have a specific
for the interface, but the names within require a different specific
that includes a `Self` facet value.
We generalize this relationship by adding a second generic to Interface,
called `generic_with_self`. When we want to work with entities inside
the interface, we move from the interface-without-specific to the
interface-with-self specific by adding a Self to the specific. This is
done independently of any particular entity inside the Interface, as
those entities are now all members of the interface-with-self generic.
Associated constants no longer need a generic of their own, as they do
not have separate generic bindings. Functions retain a generic, but if
the function has no generic arguments, it will have no bindings of its
own now.
Require decls retain a generic so that their specific can be
instantiated separately from the interface. Requiring the interface to
be complete does not require the types in a require decl to be complete
unless it is modified by `extend`. So we allow them to be completed
later by keeping them in a separate generic.
Named constraints look like interfaces and gain the additional inner
generic-with-self, with the same relationship to require decls.
This removes the need for name lookup to perform Substitution of a Self
facet into the extended scope instruction. Instead, the
`SpecificConstant` instruction inserted by a `require` decl is part of
the interface-with-self generic. When looking through a FacetType for
extended scopes, for each interface, we push the scope with the specific
for the interface-with-self. Then the constant value of the
`SpecificConstant` is correctly modified by the provided self
automatically through applying that specific.
This is related to #6727, but is generally a necessary fix even without
that issue. I'm not adding a specific test of #6727 because it should
also be covered by the tests in #6726.
Assisted-by: Google Antigravity with Gemini 3 Flash
Pursuant to recent decisions on #6124, switch `Destroy` to use a
`CustomWitness` for its implementation. Right now this is manufacturing
no-op implementation functions on each lookup, which obviously isn't
ideal but is intended as a first pass. I'm mostly trying to find the
right balance between updating the approach to reflect new decisions,
while still breaking apart work in a way.
The `CoreInterface` logic is intended to build on `CoreIdentifier`
support. We have a number of additional interfaces that require
specialized logic, and that'll extend pretty far with C++ interop, so it
seemed easiest to have a generic function for it. That's what's
replacing the logic inside C++ interop that was doing string comparisons
(which could have already been moved to `CoreIdentifier`, I just missed
it in my first pass).
This adds `CustomWitness` support because the `Destroy` witnesses can be
imported cross-file. `CustomWitness` was previously only used for C++
types, which don't yet support import, which is why that wasn't
previously an issue. The addition of `query_specific_interface_id` is
similarly needed in order to get correct sorting of witness blocks when
imported.
This PR also removes builtin constraint logic (note this is in a
separate commit to help review; it's not a separate PR because it's
difficult to split apart without tests breaking). This had been made
generic with the expectation that destroy, copy, move, and conversions
would all need related support. Under the new decision, we are not going
to do blanket impls and will instead just manufacture a `CustomWitness`
for everything.
A lot of SemIR fingerprints change, but that's probably because the
addition of `Destroy` on core classes is yielding structural changes.
Instead of naming the root namespace `package` (because it's accessed by
the `package` keyword), change it to use the current package name. Note,
buried in the checksum changes,
`toolchain/check/testdata/package_expr/fail_not_found.carbon`:
```
- // CHECK:STDERR: fail_not_found.carbon:[[@LINE+4]]:16: error: member name `x` not found in `package` [MemberNameNotFoundInInstScope]
+ // CHECK:STDERR: fail_not_found.carbon:[[@LINE+4]]:16: error: member name `x` not found in `Main` [MemberNameNotFoundInInstScope]
```
for:
```
// CHECK:STDERR: var y: i32 = package.x;
// CHECK:STDERR: ^~~~~~~~~
```
I'll leave it to you if you prefer this; the alternative I see is to
just rename `IsCorePackage` to `IsImportedCorePackage`, and/or change it
to a helper that takes a `Context` and does the right thing with
`parse_tree` (which, I need for `Destroy`-related reasons and was my
default approach).
This is a prerequisite for support for interop with C++ template names.
No behavior change here, except that it sadly changes the fingerprinting
for a lot of tests.
Right now, the impl lookup can both fail to resolve the specific
definition because it's symbolic, and return a "final" constant because
it's a `final impl`. This is adding an instruction to help ensure the
specific is resolved.
The constant evaluation is fully recursive, but I'm not adding a TODO
since that's a known issue with impl lookup in general.
#6289 absentmindedly added fields in more places, and this is undoing
that plus further fixes.
This does some cleanup of types with relation to singletons. For
`TypeType` and `ErrorInst`, they're always complete due to a
`SetComplete` call in `file.cpp`. For `CppVoidType`, it's intended to be
incomplete by construction, and so a `TypeId` should be okay. The intent
though on not generally providing these had been that `GetSingletonType`
needs to be called to get a type to be marked as complete.
In the case of `AutoType`, removing `TypeId`does change a small printing
detail. I think that's old legacy that's just been carried forward.
Otherwise, for both `InstType` and `AutoType`, I've added
`GetSingletonType` calls where they were used in order to ensure
completeness is applied correctly. These calls cause small SemIR
permutations.
This causes `AutoType` to be seen by lowering, so I'm adding a
placeholder for it. Also merging two functions that look like they're
identical in intent -- not sure why they're separate.
---------
Co-authored-by: Dana Jansens <danakj@orodu.net>
This resolves a TODO in `expr_info.cpp` by using the inst kind rather
than the bound value to track the binding's category.
Since we're churning all the `bind_name` insts in testdata anyway, I'm
also taking this opportunity to align the inst naming with the design's
terminology, by calling these insts "bindings" (this aspect of the PR is
dependent on #6231 resolving an ambiguity in that terminology). For
consistency we'll need to rename several other insts as well (see the
TODO on `RefBinding`); I'm deferring that to a separate PR to minimize
the review load, but I think those name changes are in-scope for this
review.
When deducing arguments for generic parameters of an `impl`, the
deduction calls `Convert` on the input arguments. Often, the input
argument is a facet, and needs to be converted to a type via
FacetAccessType in order to produce a different facet. These
instructions end up being added to the semir, but only their constant
values are needed for the resulting specific returned from Deduce.
In the best case, these extra instructions are just noise in the semir,
or they just cause instruction names to get differentiated with larger
suffixes.
In the worst case, these extra instructions contain references to
instructions from a generic context, and leak them out of that generic
context and into another. In particular, when importing a
LookupImplWitness instruction, the re-evaluation of it can do deduce
(when the lookup is against a generic `impl`). The instructions created
in Deduce are not part of the import, and end up referring to imported
instructions from the local context, which leads to confusion in the
toolchain, and can crash.
The `import_self_specific.carbon` test demonstrates this. It causes the
`I.F` function to be imported from the `I` interface when building the
witness table for the `impl`. Doing so imports the specific of `C` which
includes a LookupImplWitness for `Self.Accoc` in `I`. The `Self` is a
BindSymbolicName with generic binding index 0, in `I`. When Convert
creates instructions in the generic `impl forall D`, however, they end
up referencing and including this BindSymbolicName into its eval block.
But the generic binding 0 in the `impl` is a very different thing (a
value of type `E`). This confusion leads to crashes.
The SymbolicBindingType refers to the type value that will be
substituted in for the BindSymbolicName, but holds onto the EntityNameId
from the BindSymbolicName instead of (or in addition to, for now) the
instruction.
The EntityNameId will be used to look in the ScopeStack to find the
witnesses either from the BindSymbolicName instruction, or other
instructions that specify `impls` constraints against the EntityName.
This will allow us to have the `T` in `I(T)` resolve to a `.Self`
reference in the type so that we get type equality with the binding's
type: `T:! I(.Self)`.
This also does a little restructuring in the same direction, following
#6124.
Leads want `Destroy` to work similarly now for all types. As a
consequence, there doesn't seem to be as much benefit to splitting off
aggregate destruction. In this PR, the `type.destroy` function can now
be expected to destroy anything that's destructible; that means it'll be
usable for the `final fn` once that support is available.
Similarly, this gets rid of the impls other than the single blanket
impl, now using `type.can_destroy`. Since they all need to use the same
function, there's no benefit to splitting approaches. Also, now it can
just be a `final impl` since there should be no need for people to
create specializations -- if this blanket impl applies, it means the
`final fn` is the same.
This also slips in `partial` support since there's no reason to have it
diverge anymore. Also `abstract`, which I'm not sure is broadly testable
since most cases it'd come up, the `abstract` keyword is explicitly
detected/rejected.
Note though that this doesn't make any really big changes. It's just
realigning on the leads decision. I'm going this way to try to reduce
name-related churn for other changes.
Locations are similarly fragile, because adding a comment changes them.
This has made me pause when making prelude changes in #6144, so dropping
them for those cases.
Instruction ids aren't actually that interesting outside debugging, and
can be churny when doing other structural changes. I've seen this in
particular when doing singleton changes, which bump every instruction
id.
Note there are still other ways fragility from locations can crop up.
This shouldn't be considered a complete fix, but hopefully a small
improvement.
Right now, the class destroy impl is incorrectly generated (first
discussed [in
Discord](https://discord.com/channels/655572317891461132/941071822756143115/1418614787449032826)).
If we want it to be correct, deferred definition logic would need to be
added, and the declaration would need to be moved inside the `class`
scope (along with whatever generic logic that needs).
This instead switches to a blanket impl, to avoid creating latent bugs
with generating the `impl` and function body in the wrong scope. This
approach uses the same blanket impl as aggregate destruction that was
added by #6098.
The intent here is to allow progress on other parts of `Destroy`. For
example, under this model the implementation of the function body could
be done as part of lowering the specific.
This is in support of a goal of changing the blanket `destroy` impl to
use (roughly):
```
private fn CanAggregateDestroy() -> type = "type.can_aggregate_destroy";
// Handles aggregate type destruction.
impl forall [AggregateDestroyT:! CanAggregateDestroy()] AggregateDestroyT as Destroy {
fn Op[addr self: Self*]() = "type.aggregate_destroy";
}
```
That isn't done here because there's still other issues that migrating
raises. What this *does* do is add the builtin functions, and in
particular, support to `FacetTypeInfo` to make `CanAggregateDestroy`
work.
The "special requirement" approach in `FacetTypeInfo` allows us to
support restricting a blanket impl under the current approach of impls.
Maybe we'll find a cleaner approach that can work in the future, but
this fits into the current model by propagating similar to other
requirements. I'm using an enum mask because we have a number of similar
things to add (e.g. copy, move) but I'm not sure we need a full vector.
A few alternatives considered were:
- Supporting syntax more like `where .Self impls
TypeCanAggregateDestroy(.Self, SupportedInterface,
UnsupportedInterface)`. I think it'd be a little cleaner, but requires
better compile-time evaluation in order to assess the type of the call.
Right now it's expected to be a `FacetType` too early to make this work,
and I was concerned about pouring too much more time down this route.
- Providing an actual interface, in particular doing name lookup back
into `Core.` for an interface. This would've added name lookup overhead,
and the question of whether an `impl` exists.
- Generating an interface. This avoids the name lookup, but would still
raise the question of whether an `impl` should also be generated. Work
I've previously done generating interfaces for class destruction also
feels complex to both write and understand (an unfortunate issue).
- Still modeling as an `ImplsConstraint`, for example by defining a
special `InterfaceId::CanAggregateDestroy = -2` similar to what we do on
other ids. I was hesitant because of how this expands the number of
modes of `InterfaceId`, and things for consuming code to watch out for,
for what feels like a relatively niche set of use-cases that are only
interface-like.
---------
Co-authored-by: Dana Jansens <danakj@orodu.net>
Instead of hardcoding which types are copyable, add a `Core.Copy`
interface to perform copying. Move almost all the current copy support
to that interface. Some remaining pieces are still using builtin logic
after this PR:
* For tuples and structs, builtin logic is used to perform elementwise
copies. This also supports copying *adapters of* tuples and structs,
which seems like it may not be desirable, especially for non-extending
adapters. A `Copy` impl is provided for tuples of at most 2 elements, so
that `Core.Copy` constraints are satisfied, but we can't implement this
generally until we have variadics support, and don't yet have a
mechanism to generalize this to structs.
* For `enum` types imported from C++, builtin logic is used to perform a
copy. This is temporary until we have a mechanism to identify these
types from an impl in the prelude.
One lowering test in `toolchain/lower/testdata/class/generic.carbon` is
disabled for now, as it causes a crash in the lowering code due to an
ABI mismatch between the call signature in the lowered declaration of a
specific function and the call that is generated in the specific callee.
Fixing this is a little involved, and will be done in a separate PR.
---------
Co-authored-by: Geoff Romer <gromer@google.com>
This avoids impl lookups involving, say, `Core.Int` pulling in all ~65
impls in "prelude/types/int", which resulted in a lot of unnecessary
importing work, followed by a lot of unnecessary inst namer and inst
formatter work.
Before:
```
Ran 1335 tests in 6186 ms wall time, 146818 ms across threads
Slowest tests:
- toolchain/check/testdata/interop/cpp/function/arithmetic_types_bridged.carbon: 5611 ms, 5532 ms in Run
- toolchain/check/testdata/interop/cpp/function/operators.carbon: 2034 ms, 1981 ms in Run
- toolchain/check/testdata/primitives/import_symbolic.carbon: 1796 ms, 1786 ms in Run
- toolchain/lower/testdata/operators/arithmetic.carbon: 1729 ms, 1728 ms in Run
- toolchain/lower/testdata/function/generic/call_recursive_sccs_deep.carbon: 1700 ms, 1697 ms in Run
[==========] 1335 tests from 1 test suite ran. (682 ms total)
```
After:
```
Ran 1335 tests in 2419 ms wall time, 109587 ms across threads
Slowest tests:
- toolchain/check/testdata/interop/cpp/function/arithmetic_types_bridged.carbon: 1748 ms, 1665 ms in Run
- toolchain/check/testdata/interop/cpp/function/operators.carbon: 1106 ms, 1057 ms in Run
- toolchain/lower/testdata/function/generic/call_recursive_diamond.carbon: 1044 ms, 1041 ms in Run
- toolchain/lower/testdata/function/generic/call_recursive_sccs_deep.carbon: 1015 ms, 1012 ms in Run
- toolchain/lower/testdata/operators/arithmetic.carbon: 998 ms, 997 ms in Run
[==========] 1335 tests from 1 test suite ran. (652 ms total)
```
That's still slower than it should be, but a large improvement
nonetheless.
Fixes#6029
If it's just `TypeType` then the `BindSymbolicName` appears directly in
type positions, but if it is replaced with another facet value, then we
would need to insert a `FacetAccessType` around it. By giving it a
`FacetType` type, like other `BindSymbolicName`s we make it consistent
and avoid having to introduce extra instructions.
This uses each vector's size as a barrier between lists, to eliminate
the possibility of incidental collisions between entries of different
lists. This is the same as is done inside `AddBlock`.
We add a virtual node (`CompileTimeBindingPatternStart`) as the first
child of `CompileTimeBindingPattern` which holds the identifier
underneath it, so that it is checked just before the type expression of
the `CompileTimeBindingPattern`. When we reach this virtual node during
check, we add `.Self` as a name in the current scope, and when we reach
`CompileTimeBindingPattern` we remove it from scope, which ensures it's
present during only the checking of the type expression for the compile
time pattern.
At the moment the `.Self` has a different type (it's a `TypeType`) than
other `.Self` in the facet type (which are a single `FacetType`), but
the intention is to immediately substitute it out of the facet type
entirely, replacing it with a reference to the compile time binding (a
`BindSymbolicName`) itself. A TODO has been added for this.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
When an error diagnostic has an unattached location, for example because
the diagnostic points into a file that's in the prelude, use the next
attached location to position the error diagnostic's CHECK line. In
particular, if the error is followed by a note, use the position of the
note to determine where to place the error.
This exposes a general mechanism to do final fixups of the CHECK lines
to individual file_test binaries, which the toolchain's binary uses to
special-case error / warning CHECK lines.
Although this focused on `Destroy` support, some choices here around
`implicit_type_impls` are because copy/move will likely follow a similar
approach. I'm trying not to predict too much about how we'll structure
those, but I'm putting `Destroy` impl logic in a file that could perhaps
be shared with those. They'd likely be interested in similar things,
e.g. traversing members of types (particularly class, struct literal,
tuple literal).
At present this sets the destroy function as `no_op` which is consistent
with current logic, but has a TODO to correctly define.
Constant importing for functions changes slightly due to some issues I
was having with `GetFunctionType`. zygoloid suggested this approach to
avoid `EvalInst` logic.
Adds a flag for controlling whether to generating these impls. While
this does generation for `class`, as noted above this'll also need to be
done for tuples and struct literals, which would leave the `none.carbon`
min_prelude unable to use any types. Note if destruction *would* occur,
it'll still look up `Core.Destroy` for that and fail, but that's already
true of any test using `none.carbon`. I'm trying to use the flag to see
if we can keep `none.carbon` working mostly-consistently.
I'd tried separating out the flag to #5852, but that got a lot of
pushback over whether the behavior was appropriate. I'm hoping that the
interactions here make it clearer why the particular approach -- the
goal is not to enable advanced testing, or create some new end-user
behavior that we really support, it's just to keep no-prelude tests
functional. The main question raised there was why not just keep
generating `impl T as Core.Destroy` if `fn destroy` is present -- but I
think here it should be apparent that would require additional
complexity, as the generation of `impl T as Core.Destroy` is not
currently conditioned based on the implementation of `fn destroy`. I'd
rather add complexity to this flag only if it's enabling interesting
test functionality.
---------
Co-authored-by: Geoff Romer <gromer@google.com>
Iterate over arrays by producing their elements in the obvious way. We
use `i32` as the cursor type because that's the type that check converts
array indexes to. This may need revisiting if we support arrays with
more than 2Bi elements.
Also includes a fix for an import crash bug that's triggered by this
change, borrowed from #5873.
Change impls from `<interface>.impl` to `<self>.as.<interface>.impl`,
and *member* functions to `<parent scope>.<fn>` (non-member functions
exclude their parent scope). Stop special-casing builtin functions,
given the new naming scheme.
The purpose of this is to make it clearer when a member function is
being accessed and, if so, which member function. In particular, we
often access interface `Op` functions. The builtin function
special-casing was intended to help with that, but we still have lots of
`Op` functions. This particular approach should make the interactions
clearer.
This changes up queueing of block IDs a little because, in particular,
we need to process bodies of entities only after constants finish
processing. But, it should also result in less memory usage during
processing because it means we have less on the insts stack at any given
time, since we track a block rather than all instructions contained by
the block.
This switches from the `CollectNamesInBlock` approach for entities, to
instead traversing entities as they're encountered. For example, when
traversing constants, when a type is found, the entity will have its
block queued for processing.
This leads to a change in the traversal order, which affects
disambiguation done by numeric sequencing (since that's just showing the
traversal order).
This will allow for simpler "name based on name" logic. This is
something I plan to use for:
- impls: `<type>.as.<interface>.impl`
- functions: `<entity>.<member function>`
- Note an impl may be used as the entity for a bound function.
By naming the entities as they're encountered, I'll be able to rely on
the generated names rather than recalculating them.
To assist this, I'm also differentiating between the ambiguous and
disambiguated name. Otherwise, we could end up with things like
`<function>.<disambiguator>.<call>.<other disambiguator>`, where the
repeated disambiguator may not be necessary in order to get full
disambiguation. It's also a smaller delta from the current output.
Note, changing `Name` to a class felt appropriate given its shape. I was
also noticing that parts of its API were unused, and the class helps
detect unused private members.
---------
Co-authored-by: Geoff Romer <gromer@google.com>
This changes `Destroy` to use an interface for its implementation.
Note that this change includes a lot of test updates. Even when
`Destroy` is a no-op, it still causes code generation as part of
determining that.
Originally I was trying to use ranges to cut down the scope of this, and
to a degree I think they have. But a flipside here is that cases where
no destructors should be generated -- particularly globals -- would be
needed to completely remove destructor calls. Even for ranges, the range
can often include the destructor placement. So I've shifted
frame-of-thought a little: accept a bunch of destructor churn, because
destructors are needed and will be prevalent. The verbosity is a feature
of the design to make desugaring apparent in IR, not a bug.
Adds min-preludes more tests which were seen as slow and their
surrounding neighbours. This drops the file_test runtime on my machine
from about 6s to about 4.5s.
For a few files that are clearly only testing diagnostics, we drop the
if-present semir ranges and the associated TODO.
Where `--no-dump-sem-ir` is used, change to `--dump-sem-ir-ranges=only`.
Otherwise, add `--dump-sem-ir-ranges=if-present` with a TODO to change
to `only`.
Note, SemIR is affected just because the extra comments change line
numbers in files where splits aren't in use.
- Track the `VarPattern` instruction on the `VarStorage` instruction so
that it's available for name mangling.
- Mangle global variables based on the first binding name within their
pattern.
- Give global variables external rather than internal linkage, except if
they have no bindings whatsoever in their pattern.
- To support lowering references to bindings nested within a global var,
such as for `var (x: i32, b: i32)`, add some basic initial support for
reference constant expressions. Treat a global `var` as a reference
constant, and treat an aggregate access into a reference constant as a
reference constant.
This was originally needed to support constant evaluation of name
expressions, but that's now done in a different way.
This is actually a step toward treating all patterns as constants. The
upcoming change will do so in a slightly different way, and so it will
simplify the review to start from a baseline where patterns are never
constant.
Richard Smith
Dana Jansens
Geoff Romer
Jon Ross-Perkinsandjonmeow
