The `.Self` needs to be canonicalized when recording the witness, since
it will be a FacetAccessType in the `impls` clause.
Todo tests are also added for `C impls Y(.Self)`. The `.Self` in the
interface specific breaks everything as we end up replacing the `.Self`
with `C` in later `C as Y(.Self)` lookups, which then does not find the
witness.
Pull all the witnesses from `impls` constraints so that we capture
witnesses coming from named constraints on different self types, as `C
impls N(.Self)` may give witnesses for `C` or for other self types.
Fixes link failures when referencing a symbol involving a fingerprint
from a different package.
Previously we included the `Namespace`'s `import_id` as part of its
fingerprint, which caused local and imported namespaces to get different
fingerprints. We now store the `import_id` on the `NameScope` instead of
on the `Namespace` inst to avoid this problem.
Also, when we reach a package-level `NameScopeId`, consistently
fingerprint it as a (package name, library name) pair. Previously the
fingerprinting depended on whether it was imported or not, as an
imported `NameScopeId` had a parent scope (the current package). We need
to include the library name here so that private entities with the same
name in different libraries have different fingerprints.
When a class extends an interface, referring to a member name of the
interface as an unqualified name should refer to the class's
corresponding associated entity value, not to the associated entity
itself. Similarly, in an `impl`, unqualified names of associated
entities should refer to the `impl`'s corresponding value for that
entity.
To support this, we treat `impl`s as `extend`ing their implemented facet
type, and we make lookups into an extended facet type use the `Self`
type of the extending `impl` or `class` if lookup finds an associated
entity. We already did the latter if the extending entity was an
interface; this extends the existing support for these other cases.
We were assuming that a nested access meant that we'd resolve the outer
one, then the inner one. But it may be that we can just resolve the
entire nested access together. Previously if we encountered this, it led
to a CHECK failure. Now we correctly resolve it.
If a facet type contains `.X impls Y` then later references to `.X`
should know that it impls `Y`. This is done through a stack on the
context like for rewrites, where impl lookup can find constraints from
the current `where` expression being checked.
Similarly, if a facet type contains `.X impls (Y where .Z = T)`, then
`.X.(Y.Z) = T` should be available to later constraints in the facet
type for early application of rewrite rules. We add these rewrites to
the rewrite stack when handling the `impls` constraint
We replace the non-canonical ImplWitnessAccess instruction with an
ImplWitnessAccessSubstituted instruction containing the RHS of a prior
rewrite constraint in the same facet type when possible, in order to
access the value of the prior constraint. We were doing this only in the
designator access path though, not in the compound member access. Join
these two code paths when they construct the ImplWitnessAccess, and
perform the early access there for both.
Class vars are still restricted to simple `name: type` bindings, not
full patterns. This is now handled in the check phase instead of during
parsing.
This is in preparation for supporting `static var`.
Given this example function:
```carbon
fn F(T:! Z where .Self imps Y(.Self) and E(.Self) impls X(.Self)) {
T as Y(T);
E(T) as X(T);
}
```
When we identify the facet type of `T`, we replace `.Self` with `T`.
However in the initial loop, the self _is_ `T` so we don't want to
substitute `.Self` instances inside `T` with itself, as that creates
cycles.
When we see a `type impls...` constraint such as `E(.Self)` we now have
a different self-type so we can, and want to, substitute the `.Self` in
it with `T`. This was already being done, unless the RHS of the `impls`
was a named constraint. In that case we forgot that we were in a `type
impls...` constraint, and avoided replacing `.Self`. Now the algorithm
remembers and correctly replaces `.Self` for `type impls named
constraint` constraints in a facet type.
When an outer type defines an `extend` relationship to an inner type, we
require that inner type to be complete so that we can know that name
lookup can search both scopes as soon as the outer type is complete.
When doing name lookup, we require the type in which we are looking to
be complete. Then, we recursively add extended scopes, but then also
require each of them to be complete again, which inserts
RequireCompleteType instructions into the block doing lookup.
While these new instructions may differ in terms of their specifics,
they are redundant since we already required the type to be complete,
and specifics can not change the completeness of a type. They are also
problematic because a named constraint or interface can extend a scope
with a symbolic specific, by using `Self` as an argument. This inserts a
symbolic instruction into the block doing name lookup, even though that
block may not be generic.
A nested designator like `.(X.X1).(Y.Y1)` results in nested
ImplWitnessAccess instructions, which can produce cycles in the
toolchain easily when replacing `.Self`.
First, when constructing a facet type like `V:! Z where .Z1 impls (Y
where .Y1 = U)` we substitute replace `.Self` in the nested facet type,
and in this case we replace `.Self` with `.Z1` which contains a `.Self`
of its own. This was coming from us being lazy about replacing `.Self`
in an `impl as` declaration, such as `impl C as Z where .Z1 = .Self`.
The self type is known there, so we can more eagerly replace `.Self` as
we do in a `require impls` declaration. Then the replacement for `.Self`
never comes with a `.Self` that needs to also be replaced. Any resulting
`.Self` would always be the top-level one.
Second, when evaluating ImplWitnessAccess, we were replacing .Self in
the LHS of rewrite constraints, but the `.Self` may itself have a type
that contains rewrite constraints. If one of those rewrite constraints
has nested ImplWitnessAccess instructions, we evaluate the new
ImplWitnessAccess, which again finds rewrite constraints to replace
`.Self` in, and we repeat forever. For this one we just stop replacing
.Self in the LHS of rewrite constraints. Since they are always against
.Self, we can always look in the access facet's type for a value.
While fixing ImplWitness access, also correct the lookup to search
through the types of nested ImplWitnessAccess instructions to find a
rewrite value, since it may find it at any level up to the eventual
`.Self`.
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Any non-extend require decls must be satisfied when the impl definition
starts, but they are not checked. We only check for require decls in the
target interface being impld.
We were treating ImplWitnessAccess as a concrete type, but that is
incorrect if its accessing a symbolic type value. This results in
concrete impl lookup queries failing to match a generic impl that is
built with a symbolic ImplWitnessAccess in its type structure, when the
query does not have the equivalent ImplWitnessAccess in its own type
structure.
We need to look in the top level facet being accessed through
ImplWitnessAccess for witnesses, such as in `T:! Z where .Z1 impls Y`
where `T` provides the witness for `T.Z1 as Y`. But we also need to look
in the facet type of the ImplWitnessAccess for witnesses, such as in
`T:! Z` for `interface Z { let Z1:! Y }`, where `T.Z1` provides the
witness for `T.Z1 as Y`.
To support that we give TypeIterator an iteration step for
ImplWitnessAccess before recursing into it, like we do for FacetValue.
While doing this, we make TypeIterator more recursive, by making less
special casing around the step from one inst into the next. Instead of
eagerly finding a SymbolicType, we consistently recurse back into the
big switch statement and have it decide the next iteration step. This
allows it to recurse into instructions like ImplWitnessAccess and
FacetValue in a consistent manner.
This enables searching facets like `T:! Z where .Z1 impls Y` for queries
like `T.Z1 as Y`, etc.
Any facet in the query self or the query target type may provide a
witness for the requirements of the impl lookup, so search through them
all.
We accept partially identified facet types in the query self, since
`Self` can be used inside a named constraint before it's fully
identified. But any use of `Self` being converted would put it in the
query self, not the query target, which would be some generic parameter
facet type that a type involving `Self` is being converted to.
TypeIterator is expanded to support this use case, by giving it the
ability to walk through FacetType's extend/impls constraints. We return
the facet values that we find in the iterator instead of a type id. And
we also include FacetValue instructions as an iterator step for clients
that want them, while also recursing through them.
This lets us stop eliding it in textual semir tests with dump ranges.
Previously it would always get elided, even though it was part of the
range being dumped, and was referred to by other instructions in the
dump range.
Since each `.Self` is unique (can change its type if not its value) in a
facet type, having each one distinct by location also aids
understanding.
A `where` expression nested inside a `T impls X` constraint makes
`.Self` ambiguous on the right-hand side of the `where` if `T` is
anything other than `.Self`. After the `where`, the value of a `.Self`
could be `T` or could be the value of `.Self` before the `impls`
constraint: the so-called top-level value of `.Self`.
Implicit use of `.Self` in designators is always allowed, and they are
bound (and replaced by a reference) to the inner-most possible value of
`.Self`. On the right-hand side of the nested `where` above, they have
the value `T as X`.
`.Self impls ...` is also always allowed, since it acts more as a
keyword here, and it always refers to the inner-most possible value of
`.Self`.
Any other explicit use of `.Self` is diagnosed when ambiguous, in any
kind of constraint. This is done in the handling of `WhereExpr` since it
has enough context to allow `.Self impls` (which is an explicit use)
while disallowing other explicit uses. And because it has non-canonical
instructions to work with, so it is able to diagnose errors with precise
locations.
Since `.Self` is no longer going to be marked with depth modifiers, the
eval of `WhereExpr` does not need an input facet value instruction
representing `.Self` to compare with, as they are now going to all be
equivalent. So revert it back to just looking for the `PeriodSelf` name
id, through a shared helper being introduced as `IsPeriodSelf`. And drop
the period self InstId from the `WhereExpr` instruction. This causes
most of the formatted SemIR changes.
Move helpers for working with and replacing `.Self` to their own file,
out of the `facet_type.h` header/cpp files. These are working with
`.Self` facet values more than facet types, though `.Self` is a name
that only exists inside the scope of a facet type.
See
[here](https://docs.google.com/document/d/1rWcueFwIfZox6GKVGxiUG4cBzjrZ6djXiIDGyJDtrE4/edit?tab=t.0)
for the design doc.
This also removes the default value of the `result_type_inst_id`
parameter of `HandleAction`, moves it before the action in the parameter
list, and documents it. This solves two problems:
- The default made it easy to forget, leading to unnecessary
`TypeOfInst` instructions.
- When it was present, putting it after the fairly "bulky" action
argument tended to make the callsite harder to read.
This allows `T impls X` constraints to function, since they must contain
some reference to `.Self` in order to be valid. This should be
sufficient to support the interfaces we need for for loops over C++
range-for-compatible types.
We replace `.Self` in the following places:
- In a require decl, as we have a specific self facet to replace it with
from the declaration, either a user-specified facet or the symbolic
`Self`.
- When identifying a facet type, as we have a specific self that we are
identifying the facet type with. That self gets used for all `.Self`
references.
- Implicit `.Self` references on the RHS of an `impls` constraint when
building a facet type. The `.Self` references there no longer refer to
the top level self facet, so replace them with the facet that we now
know they refer to, which is found on the LHS of the `where` before the
`impls`.
- Rewrite constraints in impl lookup when validating them and comparing
them with constants from witnesses, which come from identifying a facet
type.
- Rewrite constraints in ImplWitnessAccess eval when comparing them with
constants from witnesses, which come from identifying a facet type.
Substitution is done through `SubstPeriodSelf`. It handles replacing
`.Self` and `.Self as type`, for a replacement facet that is either of
type FacetType or TypeType.
Eval currently diagnoses some ambiguous `.Self` references when doing
substitution of `.Self` but this is the incorrect place to do it, so
there are TODOs about moving this to name lookup. To support these
diagnostics there's some additional complexity in `SubstPeriodSelf` that
can go away once the TODOs are addressed, such as asking the caller if
they want to replace each `.Self`, in order for it to report a
diagnostic.
There are a number of follow-up work items here:
- Some TODO tests.
- Remove `SymbolicBindingType` since its intention was to support
`.Self` but we don't need it with this approach.
- Replace `.Self` in rewrite constraints of require decls.
- Replace `.Self` in rewrite constraints of impl as when constructing
the witness table.
- Reject explicit `.Self` in name lookup when it would be ambiguous.
- Officially disallow `.Self.A = B` in rewrite constraints in the design
docs, so that we don't have the case where `.A` is allowed but `.Self.A`
is not due to ambiguity.
We were not copying named constraints in the base facet type over to the
result of the WhereExpr eval.
Add tests that cover this by doing `impl as Constraint where ...` with
rewrite contraints either in the impl-as or in the named constraint.
When the interface is generic, these tests fail (as TODOs). When the
impl is used in impl lookup, we crash (with TODOs in the tests).
Part of #6991.
This makes them part of the identified facet type, and we can see the
constraints as part of stringify and format output.
But this does not do enough to make them useful yet: Any `T impls X`
constraint must contain a reference to `.Self` somewhere. And `.Self`
references do not get substituted, so neither `T(.Self) impls X` and `T
impls X(.Self)` will match against an incoming facet value derived from
an `impl T(U) as X` or `impl T as X(U)`, since `U` and `.Self` are never
the same thing until `.Self` can be substituted.
Now that impl lookup runs into facet values containing `.Self` (a
symbolic binding), such as in `C(.Self)`, we were crashing assuming the
type of `.Self` is a FacetType, but it can be `type` in the case of
`type where C(.Self) impls...`. Instead, use an empty facet type for the
type of `.Self` so it is always a facet. This assists with substituting
other facets into it, without having to insert an extra FacetAccessType.
`MakePeriodSelfFacetValue()` now enforces this requirement.
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
This is only fixing the decision about *whether* to produce a witness.
Implementation of the witness is still a TODO, though where a body is
generated, it should also precisely reflect where one _needs_ to be
generated.
Note the tests:
- toolchain/lower/testdata/function/generic/import_core_witness.carbon
- toolchain/lower/testdata/function/generic/import_unused_def.carbon
These tests can probably be produced _without_ Core.Destroy, but I found
the essence of them while trying to build //examples with Core.Destroy
and a simpler minimization wasn't striking me.
Assisted-by: Google Antigravity with Gemini
---------
Co-authored-by: jonmeow <jperkins@google.com>
This will be used for const-evaling functions. Splitting into a separate
commit since it touches a lot of test files, and a couple fail_todo
tests are no longer failing.
EvalOrAddInst has to create a non-canonical instruction for evaluating a
few typed insts, such as LookupImplWitness which uses an InstId to
provide a location for diagnostics.
But the output of the function is a ConstantId. We do not have access to
the non-canonical InstId after the function returns. But if the constant
value was symbolic, it was being attached to the inst, and the inst
would be added to the eval block of the enclosing generic. This
needlessly added semir for a symbolic value.
The ConstantId returned by EvalOrAddInst can be used immediately, such
as to evaluate an ImplWitnessAccess. In that case, the final evaluated
result is all we need to keep in semir.
If the ConstantId needs to be replaced by specifics, it is only as part
of some other instruction, since ConstantIds themselves are not modified
by specifics, instructions are. In that case, the canonical instruction
in the constant value would have been added to some other (now symbolic)
instruction, which would be replaced by a specific.
This has no functional change, but it reduces runtime overhead and semir
output for LookupImplWitness and ImplWitnessAccess.
Performing a lookup against `Self` inside the definition of the named
constraint leads to cycles, as described in the document [Self
contradictions in Named
Constraints](https://docs.google.com/document/d/17rn2XmME8o2MM4OJqatSVuMa1iYZ1PAgcNrf0PXR9Q4/edit?tab=t.0).
To prevent those cycles, this change introduces a large refactoring of
impl lookup.
The impl lookup done inside eval is reduced to only performing
monomorphization. That is it:
- Only looks for an provides final witnesses.
- Is not allowed to identify the facet type of the query self.
- Returns either a final witness or None (or an error)
The paths for finding non-final witnesses are now done outside of eval,
directly in the initial `LookupImplWitness()` function. If no final
witness it found through eval, the resulting non-final
`LookupImplWitness` instruction witness is returned. It does not produce
cycles to identify the facet type of query self outside of eval, since
that does not result in repeating the identification when resolving
specifics of the named constraint or require decl.
Move the ArrayStack for Context::require_impls_stack into a new class
which tracks a NamedConstraintId (or InterfaceId) for each frame of
RequireImplsIds, so that in type completion we always can find the
correct frame for a given named constraint which is still being defined,
in order to find the RequireImplsIds in the in-progress definition.
This resolves some todos, and makes `Convert` safer to call, which
unblocks some changes in pattern matching that I'm working on.
Assisted-by: Gemini 3.1 Pro via Antigravity
Previously we forced a temporary materialization, resulting in it being
treated as an ephemeral reference expression. This change allows
```carbon
var x: Class = {} as Class;
```
even when `Class` is not copyable.
This case is redundant: when deducing against a runtime parameter
pattern, the type is all that matters, and the type is added to the
deduction earlier. Additionally deducing the same argument against
parameter's subpattern just creates duplicate work, because the
subpattern has the same type.
This is a step toward removing the index from `InitForm`, so that equal
form values always have equal representations.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
The self value can be a facet-value or a facet-value-as-type. The self
value used in `require` decls is the former. The the self value used for
identifying the facet type is the latter, we end up with two different
required interfaces in the identified facet type: one for each self
value.
Always canonicalize the self value to a facet value in identification.
Then dedupe the list of extend interfaces when constructing the
`IdentifiedFacetType` before counting them. And then impl lookup needs
to canonicalize its query self for comparing with the result from the
`IdentifiedFacetType`.
This is iterating on how `Destroy.Op` generates, to start adding body
capabilities. This changes the way the signature is created, and adds a
`CoreWitness` function kind so that mangling can prevent name
collisions. The result is that what _was_ `DestroyOp` is now
`Core.Destroy.Op` or, as can be seen in
toolchain/lower/testdata/interop/cpp/nullptr.carbon,
`_COp.<hash>:core.Destroy.Core` where `:core` is indicating that it's a
core witness (taking a note from `:thunk`).
Assisted-by: Google Antigravity with Gemini 3 Flash
This allows us to capture the location at which a type literal was used,
even in the cases where we don't otherwise need to create a new
instruction to represent the type such as for `char` or `str`.
The logic used to build the underlying type is now marked as desugaring.
For cases such as `iN`, this causes the call to `Core.Int` to no longer
be added as a dedicated IR instruction, and instead its constant value
is used directly as the value of the `type_literal`. This results in
this being on balance a reduction in the size of the IR.
This also fixes a crash in C++ interop when using a `char` literal as a
template argument. The crash was caused by the template argument not
having an associated location when mapping to a C++ location. See
changes to check/testdata/interop/cpp/template/type_param.carbon for an
example that used to crash before this change.
Update alias handling to allow an alias to point at any type literal,
reinstating support for aliases for type literals such as `bool` and
`i32` that had previously worked but stopped working when we
transitioned those types to being defined in the prelude. See changes to
toolchain/check/testdata/alias/builtins.carbon.
All the test changes other than the two mentioned above are mechanical
autoupdate changes switching to the new instruction.
The type of the query self is looked into for a witness, but that type
may be unable to be identified. For example when the query is against
`Self` inside the declaration of a named constraint. Before this PR, we
would crash when identification failed. Now we produce a diagnostic.
This makes `RequireIdentifiedFacetType` take a `ContextScope` callback
(like it used to with an `AnnotationScope` callback) since all callers
now expect to handle diagnostics, and can provide useful context.
This is a followup to #6761.
Introduces `Context` and `SoftContext` messages, which can be introduced
through a `ContextBuilder`:
- The `Context` messages come before the diagnostic in the output.
- The first `Context` message steals the diagnostic level from the main
diagnostic, and turns the main diagnostic into a Note attached to the
context.
- A `SoftContext` message works similarly, but if it's preceeded by a
`Context` or `SoftContext` message, then it is dropped. This can be used
as a default/backup scope when nothing more interesting is provided up
the stack, such as in `TryEvalBlockForSpecific`.
The `ContextBuilder` is provided to a callback through
`Diagnostics::ContextScope`, an RAII type `AnnotationScope` but for
context messages.
This allows a high level operation to provide a context message like
"failed to identify facet type {0}" which will then be used as the error
if a diagnostic is produced during identification, with the latter
diagnostic attached as a note to explain why the contextual operation
failed.
In particular, this allows monomorphization errors (such as an array
bound being negative) to be attached to a higher lever operation instead
of being top-level diagnostics themselves, with the monomorphization
site being a note. This inverts the source code locations that appear in
the diagnostic, so that the top-level diagnostic points to the "user
code" which causes the monomorphization.
This is presented as an alternative strategy to #6753, which plumbed
diagnoser callbacks around to achieve the same goals.
We replace the diagnoser callbacks in type completion and operators with
ContextScope callbacks instead, which now provide better diagnostics for
monomorphization errors. Other callers to MakeSpecific do not yet have
ContextScopes introduced in order to turn monomorphization errors into
more interesting diagnostics.
This shifts logic a little so that empty top-level scopes are printed
less often. This affects imports mainly for now, but should be expected
to affect the soon-to-be-added generated scope more significantly.
Assisted-by: Google Antigravity with Gemini 3 Flash
Implementation of unused pattern bindings #2022, continued.
Whereas previous PR #6460 took care of parsing, and PR #6479 prepared
the stage by using _ in some test cases, this PR has the the actual
implementation, using a simple dataflow analysis.
---------
Co-authored-by: Burak Emir <bqe@google.com>
Co-authored-by: jonmeow <jperkins@google.com>
GetCallee returns a structure with SpecificIds in it, and then those
specifics are used to later get constant values. This is fine when those
specifics are canonical, but it's problematic when they are not, because
non-canonical specifics (from a generic eval block) do not ever have any
resolved decl/defn blocks.
Formatting in particular works with non-canonical instructions when it
formats a generic eval block. We want to be able to format the block,
but those specifics are not useful for constant value mapping/lookup.
GetCallee grabs (non-canonical) instruction ids out of other
instructions. When getting a SpecificId out of an instruction, it should
map that instruction to the canonical value first. This means the
specific will be resolved and can be used for constant value mapping
later.
Fixes#6677
Currently each interface has a `Self` facet internally that becomes a
binding to every entity inside the interface: associated constants,
functions, and require decls. Each of these has to be independently
generic as a result. This makes is challenging in extended name lookup
to move into an extended scope of an interface, as we have a specific
for the interface, but the names within require a different specific
that includes a `Self` facet value.
We generalize this relationship by adding a second generic to Interface,
called `generic_with_self`. When we want to work with entities inside
the interface, we move from the interface-without-specific to the
interface-with-self specific by adding a Self to the specific. This is
done independently of any particular entity inside the Interface, as
those entities are now all members of the interface-with-self generic.
Associated constants no longer need a generic of their own, as they do
not have separate generic bindings. Functions retain a generic, but if
the function has no generic arguments, it will have no bindings of its
own now.
Require decls retain a generic so that their specific can be
instantiated separately from the interface. Requiring the interface to
be complete does not require the types in a require decl to be complete
unless it is modified by `extend`. So we allow them to be completed
later by keeping them in a separate generic.
Named constraints look like interfaces and gain the additional inner
generic-with-self, with the same relationship to require decls.
This removes the need for name lookup to perform Substitution of a Self
facet into the extended scope instruction. Instead, the
`SpecificConstant` instruction inserted by a `require` decl is part of
the interface-with-self generic. When looking through a FacetType for
extended scopes, for each interface, we push the scope with the specific
for the interface-with-self. Then the constant value of the
`SpecificConstant` is correctly modified by the provided self
automatically through applying that specific.
When doing name lookup into an extended scope of an interface or named
constraint, the containing scope has an inner `Self` facet which can
appear in the specific of the extended scope. For instance a constraint
`N` which requires an interface `Z(Self)`:
```js
constraint N {
extend require impls Z(Self);
}
```
When doing member lookup into a facet constrained by `N`, we need to
find the specific interface `Z(...)` where the `Self` is replaced by the
self-type the member lookup is happening on in order for impl lookup to
find a witness later.
Inside that specific interface we repeat the name lookup to find an
associated entity. Then to produce a witness we perform impl lookup
against the specific interface that name lookup returned with the
self-type of the member access. So if we do member access into `A:! N`
for a member `F`, like `A.F`, we would be doing impl lookup with a query
self of `A` and looking for the interface `Z(...)` returned from name
lookup.
When impl lookup has a facet as the query self, which we do here as `A`,
it takes its type (a facet type) and identifies it to find all the
required interfaces, and it substitutes the query self into those
specific interfaces for `Self`. If the `Z(...)` we acquired from name
lookup is `Z(Self)` it will fail the lookup for `A as Z(Self)`, since in
the facet type of `A` it finds a witness for `Z(A)` instead.
Thus, we replace the inner `Self` in extended scopes, such as `N`, with
the self-type of the member access, which produces the extended scope
`Z(A)` for this example. This allows the impl lookup for `A as Z(A)` to
find a witness from the facet type of `A`.
In order to do this, we include an instruction for the inner self when
registering the extended scope. Then, when we find the extended scope in
name lookup, we can use its CompileTimeBindIndex to replace any instance
of that `Self` facet with a new facet. If the self-type of member access
is a type, we construct a FacetValue with an empty facet type that
refers to the type.
Add the required facet type as an extended scope of the containing
interface/named constraint, and teach name lookup to look for extended
scopes in named constraints.
This makes name lookup work properly when the facet type does not have a
specific that involves `Self`. Support for `Self` needs further work in
another PR.
Note that when an _interface_ requires another interface, this PR lets
us find the name, but we still fail to find a witness for the interface
named through `extend require`, and this is future work. For a named
constraint, things work correctly as the identified facet type chases
through the named constraint and includes the required interface, so
impl lookup is able to provide a witness.
Dana Jansens
Richard Smith
Nicholas Bishop
Geoff Romer
Jon Ross-Perkinsandjonmeow
Özgür