The diagnostic requires bit widths to be multiples of 8, but the test
used a mask of 3 (lower two bits), which only enforces multiples of 4.
Use a mask of 7 so values like 12 incorrectly pass the check.
This allows us to capture the location at which a type literal was used,
even in the cases where we don't otherwise need to create a new
instruction to represent the type such as for `char` or `str`.
The logic used to build the underlying type is now marked as desugaring.
For cases such as `iN`, this causes the call to `Core.Int` to no longer
be added as a dedicated IR instruction, and instead its constant value
is used directly as the value of the `type_literal`. This results in
this being on balance a reduction in the size of the IR.
This also fixes a crash in C++ interop when using a `char` literal as a
template argument. The crash was caused by the template argument not
having an associated location when mapping to a C++ location. See
changes to check/testdata/interop/cpp/template/type_param.carbon for an
example that used to crash before this change.
Update alias handling to allow an alias to point at any type literal,
reinstating support for aliases for type literals such as `bool` and
`i32` that had previously worked but stopped working when we
transitioned those types to being defined in the prelude. See changes to
toolchain/check/testdata/alias/builtins.carbon.
All the test changes other than the two mentioned above are mechanical
autoupdate changes switching to the new instruction.
Expose C++ class templates, variable templates, alias templates, and
concepts as callable values in Carbon, and map calls to them into
template-id formation, mirroring how Carbon generics behave. For now,
only type template parameters are supported; non-type and template
template parameters produce a TODO error.
I'm doing this because I figured it'd be an incremental improvement for
all the operator lookups that we do. Even to the extent that we've
discussed witness caching, I think it'll still apply. It does add one
more step to adding new interfaces (before, you'd just write the string,
now you add it to the def file and reference it).
I'll claim it makes GetClangOperatorKind a lot friendlier to read/edit,
nevermind removing the string comparisons. :)
Add a `Core.String` class to the prelude representing a string view, and
rename the `String` keyword to `str` and make it evaluate to
`Core.String`.
`Core.String` is represented as a pair of a pointer to a character
(actually, to the first character of a string, but we don't have a way
of modeling that yet) and a size (which should be pointer-width, but is
currently always a `u64` as we don't have a `usize` equivalent yet).
`Core.String` values are generated directly by the toolchain for string
literal expressions.
This follows the direction established at the recent summit, but the
design implemented here has not been through the proposal process yet.
Generalize the f64 support to support other sizes. Also provide interop
support for `float`, `_Float16`, and `__float128`.
Also lay some groundwork for non-standard floating-point types, though
we don't have any syntax to name them yet.
Don't convert to f64 until we know that's the type that we actually
want. Also reimplement the conversion from RealId to FloatId to perform
an exact conversion with a real check for overflow, rather than
performing an approximate conversion via the host `double` type.
Unfortunately, LLVM doesn't expose its integer mantissa and exponent to
APFloat conversion, so we convert the RealId back to a string for now.
The LLVM conversion also detects overflow only if the literal would
round to having an out-of-range exponent, not if the literal is outside
the range of values of the type as the Carbon design expects. It's not
clear to me which rule we actually want here, so for simplicitly I'm
using the LLVM rule for now.
In preparation for adding other floating-point types beyond f64.
* Rename the type.
* Change lowering to lower FloatLiteralType values as the placeholder
`{}` value we use for literals instead of as an LLVM f64.
* Change eval to convert the type as part of a floating point
conversion, so that lowering can lower converted constants properly.
For now we still represent a value of FloatLiteralType as a
double-precision APFloat. (That will need to change so that we can
losslessly convert literals to f80 / f128 values, and so that we can
convert literals to f32 values without double-rounding.)
Add missing builtins for float compound assignment, for building a
FloatType, and for converting a float literal to FloatType. Switch
`Core.Float` to being a class and add impls for the various
floating-point operators.
---------
Co-authored-by: google-labs-jules[bot] <161369871+google-labs-jules[bot]@users.noreply.github.com>
Co-authored-by: Carbon Infra Bot <carbon-external-infra@google.com>
toolchain/check/testdata/builtins/char/basics.carbon and
toolchain/lower/testdata/builtins/char.carbon are probably the most
interesting tests here. The parse tests is required because this adds a
new node kind, and we need coverage of it; but the attached info is
minor. There's a fair amount of test churn here because I'm adding the
Core.Char and Core.CharLiteral types as new singletons.
My intent here is that `CharId` is always a unicode code point, even
when the type is a `Char` and thus must be a single UTF-8 code unit
(single byte). This mainly means the stored value of a `CharValue` can
be printed internally without knowing the type.
---------
Co-authored-by: josh11b <15258583+josh11b@users.noreply.github.com>
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
In preparation for `FloatValue` being used more generally, and not only
for literals.
---------
Co-authored-by: google-labs-jules[bot] <161369871+google-labs-jules[bot]@users.noreply.github.com>
These constant instructions are all TypeInstId already in their type,
and this makes their names match.
Change the name of MakeSingletonInstId as well and update its comment.
We frequently want to operate on singletons. Per discussion, drop
`Singleton` to make the code shorter.
This started off as wanting to write `inst_id.is_error()`, but the
dependency relationship between ids.h and singleton_insts.h would
require some kind of delayed evaluation to allow the implementation to
remain in headers (which I suspect is helpful to have for inlining). I
could have added something like `IsErrorInst`, forward declared in ids.h
and defined in singleton_insts.h (which would always be included by
typed_insts.h), but the template approach felt like a decent balance
between (a) removing the boilerplate `::SingletonInstId`, (b)
understandability, (c) still visually mirroring if we immediately return
a singleton, and (d) flexibility for more than just `ErrorInst`. But TBH
I'd probably still have written `is_error()` if it didn't require
addressing the cross-header cycle.
Then I tried `SemIR::InstId::Is<SemIR::ErrorInst>`, which generally
worked with types but generated the complaint that it didn't shorten
*all* singleton uses. So pulling back on `::Is`, and instead just
dropping `Singleton`.
What this really does is avoids shadowing names, so that we can
comfortable have things like `Check::DiagnosticEmitter` or
`Check::DiagnosticLoc` without shadowing being a concern.
Note, down this path I'm also thinking about:
- Renaming misc DiagnosticConsumer/DiagnosticEmitter classes, possibly
just to DiagnosticConsumer/DiagnosticEmitter (so
`Check::DiagnosticEmitter` instead of `SemIRLocDiagnosticEmitter`).
- Dropping `Diagnostic` from `Emitter::DiagnosticBuilder`.
- But not for `Check::DiagnosticBuilder`, because `Check::Builder` would
be ambiguous.
- Renaming diagnostics/diagnostic_* to drop "diagnostic".
[Discussion about SemIRLoc ->
DiagnosticLoc](https://discord.com/channels/655572317891461132/655578254970716160/1353771570463768698)
reminded me of this (in particular the older [Check::DiagnosticBuilder
discussion](https://discord.com/channels/655572317891461132/655578254970716160/1344363562608627763)),
but I'd only do that rename if there's matching consensus about a path
forward where we keep SemIRLoc, and in a way that it's only ever used
for diagnostics (the divergence from which is at the root of current
LocId discussion).
I'm trying to keep that separate from a namespace addition for clarity.
This in particular uses free functions because it's likely to end up
more consistent with types (versus a wrapper object for InstStore).
Note, this is unlikely to have a performance impact, but if it does, we
can look into related approaches (and we've already discussed using
LTO).
Renames `PendingBlock::AddInst` to `PendingBlock::Add` because
`MakeElementAccessInst` expects the matching name to exist.
This creates a new check/type.h for most logic, and also moves some
functions to TypeStore in sem_ir/type.h. My approach for TypeStore is to
focus on moving the read-only functions there.
Use it in the remaining few places where we currently hardcode `i32`: as
the index type in array indexing, as the type for literals in `if`
expressions, and as a valid return type for `Run`.
In preparation for changing `Core.Int` to be a class.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
This is for more clearly distinct names, and to make it a clearer
transition from `BuiltinInst` for name conflicts. `FloatType` is also an
instruction, and we have `Carbon::Error` (common/error.h). This avoids
affecting tests, although the name is embedded in the builtin test.
In `LegacyFloatType`, `Legacy` because I was having trouble coming up
with a more appropriate name. I'm not clear this is a `FloatLiteralType`
at present, it needs some work to mirror `IntLiteralType`.
In `ErrorInst`, the suffix `Inst` was discussed as good and similar to
`BuiltinInst` (although I'm trying to get rid of that).
For the few remaining uses of the builtin `i32` type, manually build an
`IntType(Signed, 32)` value instead. These are:
- The return type of `Run`.
- The type that int literals in an `if` expression are converted into.
- The type of an array index expression.
We should consider converting those three cases away from `i32` over
time.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
When an `IntLiteral` appears as an operand of an `if` expression,
convert it to `i32` for now, so that we don't reject things like `if
cond then 1 else 2` due to having a non-constant value of type
`IntLiteral`.
For tuple indexing expressions such as `(a, b).0`, convert the index to
type `IntLiteral`, not to type `i32`. This isn't strictly necessary to
do in this PR, but avoids the need to provide an `IntLiteral` -> `i32`
implicit conversion for `no_prelude` tests using this syntax.
The first change here is to canonicalize away bit width when tracking
integers in our shared value store. This lets us have a more definitive
model of "what is the mathematical value". It also frees us to use more
efficient bit widths when available, such as bits inside the ID itself.
For canonicalizing, we try to minimize the width adjustments and
maximize the use of the SSO in APInt, and so we never shrink belowe
64-bits and grow in multiples of the word bit width in the
implementation. We also canonicalize to the signed 2s compliment
representation so we can represent negative numbers in an intuitive way.
The canonicalizing requires getting the bit width out of the type and
adjusting to it within the toolchain when doing any kind of math, and
this PR updates various places to do that, as well as adding some
convenience APIs to assist.
Then we take advantage of the canonical form and embed small integers
into the ID itself rather than allocating storage for them and
referencing them with an index. This is especially helpful for the
pervasive small integers such as the sizes of types, arrays, etc. Those
no longer require indirection at all. Various short-cut APIs to take
advantage of this have also been added.
This PR improves lexing by about 5% when there are lots of `i32` types.
---------
Co-authored-by: Dana Jansens <danakj@orodu.net>
Co-authored-by: Carbon Infra Bot <carbon-external-infra@google.com>
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
This instruction represents integer values, whether they come from
literals or calculations, so it the old name is inaccurate. I also plan
to rename `BigInt` to `IntLiteral` based on recent discussion and this
change aims to avoid confusion stemming from the same name being used
for two different things.
I'm not renaming `FloatLiteral` because recent discussion suggests we
may want distinct `FloatLiteral` versus `FloatValue` representations in
SemIR.
We can't completely remove std::string from diagnostics because it's
probably better to provide a string than something like a
StringLiteralValueId or NameId (because those may be opaque for someone
trying to present the diagnostic). So this change is just playing
whackamole on another couple things that could easily use the new format
providers.
This is a primarily automated change:
- Search & replace for capitalization
-
`(CARBON_DIAGNOSTIC\((?:\n\s+)?\w+,(?:\n\s+)?\s\w+,(?:\n\s+)?\s")([A-Z])`
- `$1\L$2`
- Search & replace for period
-
`(CARBON_DIAGNOSTIC\((?:\n\s+)?\w+,(?:\n\s+)?\s\w+,(?:\n\s+)?\s"(?:[^)]|\n)+)\.("[,)])`
- `$1$2`
- Limited search & replace for `ERROR: ` -> `error: ` in streamed things
- Leaving a TODO for command_line because there's more cleanup that can
be done there
- Modify diagnostic_consumer.cpp
- ERROR -> error
- WARNING -> warning
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
This is for consistency with #4120. Similar to that, we can use
overloads on the typed NodeId rather than individually named handlers.
There isn't the same caller benefit here though, since the calls from
check.cpp are already boilerplate.
I'm trying to increase the distinction between BuiltinKind and
BuiltinFunctionKind. BuiltinKind is for instructions,
BuiltinFunctionKind is for function definitions. To get to this point,
I'm doing a few changes:
- BuiltinKind -> BuiltinInstKind
- builtin_kind.* -> builtin_inst_kind.*: filename consistency
- Builtin -> BuiltinInst: mainly for consistency with the above
- Builtin::builtin_kind -> BuiltinInst::builtin_inst_kind: somewhat
repetitive but seems like a consistent edit
- Function::builtin_kind -> Function::builtin_function_kind: seems a
useful distinction
I'm leaving alone things like (and mentioning in case there's a desire
for more renames):
- InstId::BuiltinError, InstId::ForBuiltin: these I think are more
apparent because they're directly associated with Inst.
- GetBuiltinICmpPredicate in lowering: maybe builtin function handling
should be in its own file, but these local names don't feel problematic
to me.
- GetBuiltinType, BuildBuiltinValueRepr, PerformBuiltinIntComparison:
similar to the above, names don't feel too problematic
Most of these are places where we failed to include a header file and
simply never got an error about this. The fix is to include the header
file.
Most other cases are functions that should have been marked `static` but
were not. Finding all of these was a main motivation for me enabling the
warning despite how much work it is.
One complicating factor was that we weren't including the `handle.h` for
all the state-based handler functions. While this isn't a tiny amount of
code, it is just declarations and doesn't add any extra dependencies. It
also lets us have the checking for which functions need to be `static`
and which don't. For the `parse` library I had to add the `handle.h`
header as well, I tried to match the design of it in `check`.
I have also had to work around a bug in the warning, but given the value
it seems to be providing, that seems reasonable. I've filed the bug
upstream: https://github.com/llvm/llvm-project/issues/94138
I also had to use some hacks to work around limitations of Bazel rules
that wrap `cc_library` rules and don't expose `copts`. I filed a bug for
`cc_proto_library` specifically:
~https://github.com/bazelbuild/bazel/issues/22610~https://github.com/bazelbuild/bazel/issues/4446
Trying to conform with #4009. Changes SemIR::LocIdAndInst construction
to root out struct init cases with AddInst and related functions. I'm
using templating of AddInst functions in order to avoid `AddInst(loc_id,
InstName{...})` and instead have `AddInst<InstName>(loc_id, {...})` with
I think similar readability results. There are a couple cases where inst
construction is templated and so designated initializers couldn't be
used, so this may be better for those in particular due to the extra
type enforcement.
This probably doesn't clean up every last case, but I was trying to get
the bulk at once without bleeding over into less related changes.
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Modifies the core package and literal handling to use factory functions
for standard type literals.
Updates function/builtin/import.carbon to stop depending on the prelude,
since it would list all the impls in the core file. Updates
alias/builtins.carbon to be failing (the type values cannot be aliased).
Adds support for unary `-` and binary `+`, `-`, `*`, `/` for floating
point types.
Real literals are now transformed to `llvm::APFloat`s during the check
phase into the `FloatLiteral` instruction.
This PR likely collides a bit with #3892 and might need to be updated
when that one is merged.
`i32` is retained as a special case for now, for bootstrapping purposes,
and maps to `BuiltinIntType`, which is distinct from `Core.Int(32)`.
This will be removed later once we support `Core.BigInt`.
For now this provides both the `iN` types and also the builtins to
support `Core.Int(N)`. The intent is that we'll change the `iN` support
to rewrite to calls here when we do that for the other type literals and
type keywords.
No conversions between integer types are supported yet, and all literals
are of type `i32`, so we can't actually form values of any of these new
types.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Co-authored-by: Carbon Infra Bot <carbon-external-infra@google.com>
- Adds an empty prelude.carbon file
- Imports that file in any non-Core package file
- Adds --disable-prelude-import to avoid that
- Adds --exclude-dump-file-prefix to be able to hide files from dumping
- Used to hide core files (we can't do this by package name due to lex
dumps, for example)
- Restructures some tests to not rely on `i32`, particularly `alias`
tests (which rely on a name ref) and tests with no prelude.
I'm adding the framework for switching i32 to calling Int32 in the
prelude, but I'm running into a separate error actually switching over.
So that *mostly* works, but isn't quite ready for prime time. However,
maybe the current state of this PR is still useful to review since it
does a lot of the infrastructure work and adds the %Core everywhere?
This is temporary: eventually per the design we should be forming
integer literals whose types reflect their values. But for now we should
ensure that values fit within their types.
This also fixes canonicalization of integer constants and hence of array
types, because we no longer have multiple different representations of
each `i32` value depending on the bit-width used for the literal.
This was previously discussed at
https://discord.com/channels/655572317891461132/655578254970716160/1209975051588210729.
I'm initiating this mainly because we typically use "id" suffixes to
indicate an `IdBase` being passed around and the non-id suffix of
`parse_node` suggests at it carrying more data than it actually does.
There used to be more reason for avoiding `node_id` because
`SemIR::InstId` used to be named `NodeId`, but that's no longer
necessary. As a consequence, I'd like to rename `parse_node` to more
precisely reflect its type.
In full, this is doing:
```
parse_node_kind -> node_kind
parse_node -> node_id
ParseNodeCategory -> NodeCategory
ParseNodeKind -> NodeKind
ParseNode -> NodeId
```
This is primarily in check and sem_ir, but with some `parse_node_kind`
references in parse too.
Pluralization is consistent with name forms on both sides, so that
wasn't part of my replacements.
The parse nodes are still tracked as part of the same value store
interface in order to ensure parity, but they're split out from Inst
itself in order to reduce the size of Inst -- the expectation is that
they don't need to be passed around quite as much.
This change doesn't actually reduce the passing very much, although
there are hints of it: AddInstAndPush doesn't typically need a separate
parse node from the one on the Inst itself, for example. In a couple
spots I changed code to rely a little more on the InstId until the
ParseNode is needed, but it's very low hanging fruit where done. I think
convert could do more to not eagerly fetch the parse node before its
use, but more cleanup felt it would be easier to handle separately. I'm
currently viewing this as making such cleanup _possible_ rather than
executing on it up-front.
But also, I want to make sure there's a consensus to head in this
direction before pulling the trigger. We speculated that this would
result in the parse node being passed around less, and I do think that's
the case, although it's a bit fuzzy in the change.
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Goal is to increase type safety, though more work needs to be done (see
added TODOs).
Note that, after this change, check handlers corresponding to deleted
parse node kinds will no longer compile.
---------
Co-authored-by: Chandler Carruth <chandlerc@gmail.com>
We have `StringLiteral`s in multiple other `Carbon` sub-namespaces.
Rename to a more specific name to avoid collisions.
We should likely also rename `Carbon::IntId` -> `Carbon::IntValueId` and
`Carbon::RealId` -> `Carbon::RealValueId`, but this collision is
prioritized because it was blocking work on typed parse nodes which
introduces a `Carbon::Parse::StringLiteralId`.
I was suggesting this because `FloatingPoint` is pretty long. `int` and
`float` should be familiar abbreviations. `unsigned` should be familiar
to developers too, but `UnsignedInt` still feels usefully clearer for
the additional chars.
cui
Richard Smith
Jon Ross-Perkins
Boaz Brickner
Dana Jansens
Thomas Köppe
Pablo Paglilla
czapiga
josh11bandChandler Carruth