This adds a block for exported InstIds, rather than scanning the package
scope. This working down a path discussed last month, which we'll need
to add enclosing namespaces to the Inst in order to complete import of
something like `namespace NS; var NS.a;`
Exports could've been a separate `vector<InstId>` on `SemIR::File`, but
using an entry in `inst_blocks` felt more consistent.
The goal here is to make the representation more uniform so that we can
start adding different kinds of binding -- checked generic bindings and
template bindings -- across both function parameters and local `let`
declarations.
With this change, the entry in the parameter list for the function is
the name binding, not the Param itself, which has some ripple effects on
consumers of that list that want to access the parameter rather than the
binding. This is expected to change again when we start adding more of
the pattern matching SemIR, but this seems good enough for now.
Adds a `LazyImportRef` instruction. Versus `CrossRef`, this is intended
to represent an instruction which cannot be used directly, and must be
replaced when it comes up due to name lookup. The intent is to use this
to avoid recursive loading of imported IR instructions.
Note, under this model, when `ResolveIfLazyImportRef` is called, it
essentially needs to load both inst and type information to a sufficient
point where any further attempts would hit name lookup again. That will
probably be complex, and the current implementation is just touching the
surface of the issue. I was heading down this route because it would
mean we have a limited number of points that need to consider whether
they're going to talk about a `LazyImportRef`.
I'm considering whether `CrossRef` should be dropped in favor of more
specific `Builtin` special-casing, due to the divergence of desired
behaviors. This could mean dropping the `builtins` IR since it's not
looking useful right now.
Modify `NameScope` to track whether the scope is associated with a load
error. This is to handle cases where one or more imports failed, so we
do not want to issue warnings for related scopes.
The 0-size on `ValueStore` comes up due to the changes to `NameScope`,
which make it too large for the default handling. After discussion with
zygoloid, the thought was we might want to try reserving a roughly
correct value based on parse node counts, but the stack default wasn't
buying much.
Fixes a bug where the implicit import used the package name instead of
the invalid identifier.
BinaryOperatorAdd had been added early on as a proof-of-concept for
toolchain design for parsing -> checking flow. However, it doesn't
reflect the interface direction for operators, and now other portions of
the toolchain demonstrate the relevant logic. Instead, it's just a bit
of an outlier versus other instructions which have evolved over time.
Most of the calls to `StringifyType` already passed `true` for
`in_type_context`. Checking the rest, I found that every one of them was
already sufficiently clear that they were printing a type, or could be
made so with a very small change to the diagnostic text.
I was suggesting this because `FloatingPoint` is pretty long. `int` and
`float` should be familiar abbreviations. `unsigned` should be familiar
to developers too, but `UnsignedInt` still feels usefully clearer for
the additional chars.
This adds instructions so that we get printing. I may adjust the
instruction format a little further to add a type, but I think the basic
setup will remain.
Note this builds on #3414
Instead of ad-hoc conversion tracking on some kinds of nodes that
conversion creates, consolidate tracking into a single node kind. This
frees up an operand on `Init` instructions that can be used to store the
destination.
Add a `NameId` that is effectively just a wrapper around a `StringId`,
with
some additional predefined values for names that don't correspond to
strings, such as the name of `self` or the function's return slot.
Following up on discussion yesterday regarding this split.
Note, I'm expecting #3341 to do IdentifierId -> NameId in SemIR. It
might be worth adding NameId creation directly to StringStore if you're
content with this setup though.
If the initializing representation is the same as the value
representation, don't materialize a temporary and perform a value
binding. Instead, directly extract the value, using a new
`value_of_initializer` node.
This removes a lot of redundant `alloca`s from our generated LLVM IR.
Adds a `BoundMethod` SemIR node to represent an `x.F` bound method, with
a new builtin type `BoundMethodType`. Reorganized conversion of call
expression arguments to also check and convert a `self` parameter in the
implicit parameters list.
In passing, improved diagnostics and error recovery for bad call
expressions. We now build a `call` node with the appropriate type and
value category, but with invalid arguments, if the argument conversion
failed, and diagnose calls to non-callable expressions.
`addr self` methods don't work properly yet; the `addr` is ignored for
now.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Provides an adapter for the llvm::yaml API because it otherwise needs a
bunch of const/non-const definitions, and the traits are difficult to
diagnose issues with. The current approach is pretty simple to use, even
if it's not super efficient (which, yaml output is more of a debugging
thing so I'm not really expecting it to be an issue).
Changes the format of yaml output to provide more index information,
just as reminders when seeing something like `node+0`. Note this would
create more churn in deltas if we were reliant on the output yaml in
tests, but we aren't so it should be okay.
Add support for member access into classes, for both non-instance
members and for fields.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
This replaces the use of `VarStorage` in this case.
Add an `UnboundFieldType` type as the type of a field, in cases where
it's referenced without an accompanying object.
Add a `BindName` node to describe the name binding performed for both
variables and fields so that we can handle them more uniformly.
This standardizes on having ValueStore and related structures provide
printing, removing the handlers in file.cpp.
The `[]` is provided for empty sequences versus if there was simply
nothing, in which case it would be a sequence when non-empty, and a null
value when empty. Consistently (and explicitly) providing sequences
feels easier to understand.
The changes to the output yaml are overall more terse. My hope is that
this is an improvement for most readers.
Also fixes printing of APInt, defaulting to unsigned for consistency
with Carbon's use.
Finishing what #3316 started, add more bespoke ValueStore-like
structures to File. With this, the things which previously had somewhat
boilerplate Add/Get functions are now all on side classes, giving a
uniform style of API for calling.
Note, I was on the fence about making things public on ValueStore. If
it's preferred that I make some things there protected I certainly can,
there's just a trade-off that may mean more distinct child/wrapper
types.
Retain the `ClassDeclaration` node to represent a syntactic declaration
of a class (including possibly a declaration of a generic class), but
use a separate SemIR node to represent the class type itself. This
allows us to give the two separate treatment.
The `ClassDeclaration` is still entered into the name lookup table for
its enclosing scope, but when it is named in an expression, the class
type is produced instead. When the class declaration is named in a
declaration name, it can be used to define members of the class, but an
expression that resolves to the class type cannot be used to define
members of the class.
In order to distinguish these cases, use `Name` rather than
`NameExpression` for the left-hand side of a `QualifiedName` parse node.
This removes the only use of the `Expression` form of a declaration
name, so that is also removed.
In the future, `ClassType` will also be used to describe types such as
`Vector(T)`, for which there is no corresponding `ClassDeclaration`.
Building on #3313, start using ValueStore on File. Functions and classes
are straightforward. Types here I present as a borderline case where
maybe we want a more bespoke API, but maybe this is okay? Most other
things probably need a slightly different API, which although I might do
that for a consistent interface, felt more out-of-scope for this change.
Split `node.h` into separate files for ID types (`id.h`) and for typed
nodes (`typed_nodes.h`). The per-node-kind data is now specified as part
of declaring the typed nodes, and is removed from the node kinds
x-macros, which now simply enumerate the node kinds.
Building on #3311, change SemIR to use the SharedValueStore. Since this
removes hermeticity, raw output no longer prints ints, reals, and
strings. TokenizedBuffer accessors are modified to return IDs because
values are often passed through in semantics without needing to read
them.
I would've put SharedValueStores on Context, except for the
GetArrayBoundValue convenience method. I felt awkward removing that, so
it's on File, at least for now. That's then used by the formatter and
Lower too. The flipside of this is that TokenizedBuffer has a
SharedValueStores only for printing, so maybe that's similar enough to
what File is doing.
This doesn't start shifting other SemIR members to ValueStore, but that
seems like a next step.
This includes being able to define a class that was previously
forward-declared, and being able to define a member function out-of-line
that was previously declared inside a class.
No support for fields or methods yet, and a class definition doesn't yet
cause the class to be treated as a complete type.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Using the computed value representation, fix lowering of struct and
tuple values to use the value representation rather than the object
representation. Fixes an issue found in the review of #3257.
This currently causes us to compute value representations of all types
as they are created, which generates substantially more SemIR to
represent types. We can get some of that back by deferring computation
of the value representation until the type is required to be complete,
but some of the additional cost here will persist with this approach.
I also considered making the computation of the value representation
type be something that lives entirely within the lowering phase, but I
think that's not the right approach in the longer term, because the
value representation will be semantically visible and relevant once we
start allowing it to be customized.
We should consider moving the nodes that exist to compute canonical
non-local types, including value representations, out into a separate
global block. That will clean up the SemIR representation substantially,
and make the SemIR produced for a function not depend on which types we
happen to have encountered beforehand. But that's not being done in this
PR.
---------
Co-authored-by: Chandler Carruth <chandlerc@gmail.com>
Don't produce an error diagnostic if any of the information leading to
identifying that error is itself known to be affected by an
already-diagnosed error.
Bug found by fuzzing. Problem was untyped SemIR nodes had an invalid
type id, which was retrieved by `HandlePrefixOperator` and then passed
to `context.GetUnqualifiedType`, ultimately performing an invalid access
in `semantics_ir_->GetNode`.
We prefer to make a placeholder type for functions and namespaces to
remove the need for checking for the untyped case everywhere. Eventually
functions will have their own types, but this approach will be needed
for namespaces (and perhaps other non-first-class entities like unbound
methods and interface members) long term.
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
This is shorter, more closely connected to code using the typed node
types, and avoids using the ambiguous word `Node` in places referring to
typed `SemIR` nodes.
Replace `SemIR::Node::GetAsFoo` and `SemIR::Node::Foo::Make` with
`SemIR::Foo` class that represents a particular kind of node, with named
fields.
Rename `SemIR::IntegerLiteral` and `SemIR::RealLiteral` to
`IntegerValue` / `RealValue` to better reflect their purpose and avoid a
name collision with the corresponding `SemIR` node kinds.
Remove `NodeKind::Invalid` and the `SemIR::Node` default constructor
entirely, as they were not used for anything.
A `let` declaration is represented by a `bind_name` node in SemIR:
```carbon-semir
%b: i32 = bind_name "b", %a
```
Because `Check` encounters the pattern before it sees the value, we
first create the `bind_name` node with an unset value and don't add it
to the block. Then, once we've seen and converted the initializer, we
update the `bind_name` to have the value and add it to the current
block, after the initializer code.
Also add `name_reference_untyped` for references to non-first-class
names without types, which currently covers namespaces and functions.
This improves the fidelity of the SemIR representation, and fixes some
issues where we would use the wrong location for nodes and diagnostics
downstream of a name reference.
We're still missing a representation for dotted name expressions, such
as `Namespace.Function`, and we don't use the `untyped` node as an
operand of any other node yet.
Trust semantics to have put them in the right places.
Many parts of lowering still need to be updated to use the value
representation chosen at the semantics layer, but this is an incremental
step towards that.
Fix a bug where we would perform the computation of the return location
in SemIR after we have already used it in some cases, leading to
assertion failures during lowering. Instead, accumulate a sequence of
instructions to compute the return location in a temporary block, and
overwrite the return slot with those instructions when we perform
initialization.
StubReference is replaced by a more general SpliceBlock node, that takes
a code block and a result value, executes the instructions in the block,
and produces the result. This is used in the uncommon case where more
than one instruction is required to compute the return slot, which can
happen if we need to first emit a temporary and then index into it, or
if we need to perform multiple levels of indexing before we reach an
entity to initialize.
Jon Ross-Perkins
Richard Smith
josh11b
