Add `Dependent` value and initializing representations for types whose
representations are unknown because they are dependent. When generating
SemIR in such cases, use a worst-case initializing representation that
both provides a destination address and also propagates a potential
result value.
Use this to fix incorrect lowering and lowering crashes for specific
functions involving generic types that don't use a copy value
representation.
In lowering, be careful to distinguish between whether the initializing
representation for the generic return type uses a return slot (which
affects whether the SemIR declaration and call have one) and whether the
initializing representation for the specific return type uses a return
slot (which affects whether the LLVM IR declaration and call have one).
This is in support of a goal of changing the blanket `destroy` impl to
use (roughly):
```
private fn CanAggregateDestroy() -> type = "type.can_aggregate_destroy";
// Handles aggregate type destruction.
impl forall [AggregateDestroyT:! CanAggregateDestroy()] AggregateDestroyT as Destroy {
fn Op[addr self: Self*]() = "type.aggregate_destroy";
}
```
That isn't done here because there's still other issues that migrating
raises. What this *does* do is add the builtin functions, and in
particular, support to `FacetTypeInfo` to make `CanAggregateDestroy`
work.
The "special requirement" approach in `FacetTypeInfo` allows us to
support restricting a blanket impl under the current approach of impls.
Maybe we'll find a cleaner approach that can work in the future, but
this fits into the current model by propagating similar to other
requirements. I'm using an enum mask because we have a number of similar
things to add (e.g. copy, move) but I'm not sure we need a full vector.
A few alternatives considered were:
- Supporting syntax more like `where .Self impls
TypeCanAggregateDestroy(.Self, SupportedInterface,
UnsupportedInterface)`. I think it'd be a little cleaner, but requires
better compile-time evaluation in order to assess the type of the call.
Right now it's expected to be a `FacetType` too early to make this work,
and I was concerned about pouring too much more time down this route.
- Providing an actual interface, in particular doing name lookup back
into `Core.` for an interface. This would've added name lookup overhead,
and the question of whether an `impl` exists.
- Generating an interface. This avoids the name lookup, but would still
raise the question of whether an `impl` should also be generated. Work
I've previously done generating interfaces for class destruction also
feels complex to both write and understand (an unfortunate issue).
- Still modeling as an `ImplsConstraint`, for example by defining a
special `InterfaceId::CanAggregateDestroy = -2` similar to what we do on
other ids. I was hesitant because of how this expands the number of
modes of `InterfaceId`, and things for consuming code to watch out for,
for what feels like a relatively niche set of use-cases that are only
interface-like.
---------
Co-authored-by: Dana Jansens <danakj@orodu.net>
When returning a value from a function whose return type has a by-copy
initializing representation, perform initialization like we do when the
return type has an in-place initializing representation. This makes our
SemIR representation more uniform, as the return expression will now
always be an initializing expression rather than a value expression, but
more importantly it means that attempts to return a non-copyable type by
value now fail, even if the type has a by-copy initializing
representation.
This catches a bunch of places where we were returning a value of an
unconstrained template parameter `T:! type`, which we were incorrectly
allowing because we didn't notice it was not copyable. Unfortunately
this then requires quite a few test updates.
Like #6034, this exposes a lowering issue where lowering crashes when
attempting to lower a specific copy operation for certain types; a
couple more tests are temporarily disabled here. An upcoming PR
dependent on this one will fix the issue and re-enable those tests.
This uses each vector's size as a barrier between lists, to eliminate
the possibility of incidental collisions between entries of different
lists. This is the same as is done inside `AddBlock`.
Add missing builtins for float compound assignment, for building a
FloatType, and for converting a float literal to FloatType. Switch
`Core.Float` to being a class and add impls for the various
floating-point operators.
---------
Co-authored-by: google-labs-jules[bot] <161369871+google-labs-jules[bot]@users.noreply.github.com>
Co-authored-by: Carbon Infra Bot <carbon-external-infra@google.com>
Change impls from `<interface>.impl` to `<self>.as.<interface>.impl`,
and *member* functions to `<parent scope>.<fn>` (non-member functions
exclude their parent scope). Stop special-casing builtin functions,
given the new naming scheme.
The purpose of this is to make it clearer when a member function is
being accessed and, if so, which member function. In particular, we
often access interface `Op` functions. The builtin function
special-casing was intended to help with that, but we still have lots of
`Op` functions. This particular approach should make the interactions
clearer.
This changes up queueing of block IDs a little because, in particular,
we need to process bodies of entities only after constants finish
processing. But, it should also result in less memory usage during
processing because it means we have less on the insts stack at any given
time, since we track a block rather than all instructions contained by
the block.
Use `full.carbon` min-prelude for any tests using the full prelude. A
few tests were using it unnecessarily and are changed to a more minimal
one in the process.
Any test which does not include some min-prelude will now fail with an
error.
This changes `Destroy` to use an interface for its implementation.
Note that this change includes a lot of test updates. Even when
`Destroy` is a no-op, it still causes code generation as part of
determining that.
Originally I was trying to use ranges to cut down the scope of this, and
to a degree I think they have. But a flipside here is that cases where
no destructors should be generated -- particularly globals -- would be
needed to completely remove destructor calls. Even for ranges, the range
can often include the destructor placement. So I've shifted
frame-of-thought a little: accept a bunch of destructor churn, because
destructors are needed and will be prevalent. The verbosity is a feature
of the design to make desugaring apparent in IR, not a bug.
Previously we created allocas for temporaries at whatever point in the
output LLVM function we'd reached. This would result in these being
dynamic allocas (performing a dynamic stack allocation), which is
inefficent and can lead to a stack overflow if it happens in a loop.
Switch to putting the allocas in the entry block instead, and instead
generate a lifetime start marker when we reach the point where the
temporary is introduced. We already did this for local variables; this
is just factoring out and reusing that code.
- Update all the llvm::Function pointers after function replacement.
Some were previously left in an inconsistent state.
- Only do function replacement once, after converging on the canonical
specific to use.
Update remaining parts of lowering, in particular the lowering of
aggregates, to handle lowering within a specific from a different file
than its generic. Look up information about a type in the current
specific and in its file rather than performing lookups for the type in
the generic and its file.
Remove or fix all remaining uses of raw `TypeId` in
lower/function_context and lower/handle*, so that the type from the
specific is consistently always used when lowering a specific function.
---------
Co-authored-by: Geoff Romer <gromer@google.com>
Adds min-preludes to a few more slowest tests, and adds them to most of
the lowering tests, with a few exceptions that make use of operators.
This take the runtime of file_test down from about 8s to about 7s on my
machine.
We add support for Negate on uints in the min-preludes.
This drops the wall clock time for running file_test from 10s to 8s on
my machine. There's many more tests to convert, as each one takes the
test from ~1s to ~100ms. Compiling the full prelude is a bit slow now
since #5653, and before that file_test was taking about 3.5s.
We introduce a few more flavours of min_prelude to support more tests.
Remove use of i32/bool when a builtin type or test-define class type can
work. Make `Sub` user-defines in a test that is testing builtin
functions and not trying to test the prelude, in the same way that it
defines its own Negate. Reduce use of the + operator when it isn't
contributing to the test's coverage, since the + operator needs the full
prelude. Remove use of Core.Print when it's not required for the test.
Move `deduce_nested_facet_value.carbon` to its own file since it uses
TypeAnd, and the rest of deduce.carbon does not, but uses i32. This
means they can each use a different min-prelude.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
When the binding pattern appears within a `var` pattern, convert to a
reference. Otherwise, convert to a value.
This gets the advent of code examples to produce the right answers again
:)
---------
Co-authored-by: Geoff Romer <gromer@google.com>
When lowering a specific function whose generic was defined in a
different file, switch to that other file's `FileContext` and lower the
generic there. Also pass the `FileContext` corresponding to the specific
into the `FunctionContext`, and use that `FileContext` for resolving
requests for constants and types from the specific.
The same specific function will (eventually) be emitted as part of
lowering multiple different source files, so don't give them unique
external linkage.
- Track the `VarPattern` instruction on the `VarStorage` instruction so
that it's available for name mangling.
- Mangle global variables based on the first binding name within their
pattern.
- Give global variables external rather than internal linkage, except if
they have no bindings whatsoever in their pattern.
- To support lowering references to bindings nested within a global var,
such as for `var (x: i32, b: i32)`, add some basic initial support for
reference constant expressions. Treat a global `var` as a reference
constant, and treat an aggregate access into a reference constant as a
reference constant.
`IRBuilderBase::SetInsertPoint` weirdly replaces our debug location with
one copied from the new insertion point, so undo its damage after
calling it.
Also included: a couple of cleanups I made while tracking this down.
We eliminate the `FacetAccessWitness` instruction, which would sometimes
immediately evaluate to a concrete `ImplWitness`, and sometimes remain
symbolic. This instruction is now replaced by `LookupImplWitness` in all
cases. To support the same use cases, when it is evaluated,
`LookupImplWitness` will look in the self value if it's a facet value,
and attempt to return a concrete `ImplWitness` from it before looking
for an `impl` statement.
The `LookupImplWitness` instruction's value is now canonical, even when
it evaluates to a symbolic `LookupImplWitness` instruction, by
canonicalizing the self value of the lookup query. This canonicalization
unwraps `FacetAccessType` and `FacetValue` instructions to get to an
underlying canonical facet value. However we must preserve and use the
non-canonical query while evaluating the instruction in order to look
for a concrete `ImplWitness` if the query self value was a concrete
`FacetValue`. The canonicalization ensures that symbolic witnesses
obtained from a facet value are compatible with those obtained from an
impl statement, as long as the self types originate from the same
canonical facet value though they may have been narrowed.
Member access now unconditionally does a `LookupImplWitness()`
operation, instead of only sometimes doing the lookup for a final impl
declaration.
`EvalImplLookupResult` is marked `[[nodiscard]]` so that we don't
construct it and forget to return it. This was a mistake made at one
point during the creation of this PR. And the `has_concrete_value()`
method no longer has a precondition that `has_value()` is true, since we
want to look for a concrete result only in the new use of
`EvalImplLookupResult` returned from lookup into the query self facet
value.
The TODO from `FacetAccessWitness` evaluation is addressed by ensuring
the index of the witness in the `FacetValue` comes from the required
interfaces of the `FacetValue`'s type, and that the type (a `FacetType`)
is the same facet type used in the query to construct the `FacetValue`'s
witness block. This is made possible by eliminating the
`FacetAccessWitness` indirection. The lookup into a `FacetValue` happens
while evaluating `LookupImplWitness` and it does so directly on the self
value. This gives a consistent view of the witness set and the facet
type, as they both come from the same instruction.
All of this with 400 less lines of code. :)
---------
Co-authored-by: josh11b <15258583+josh11b@users.noreply.github.com>
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Get type in specific when lowering associated constants. This resolves
crash when getting type for type_id is not found, when the query is for
a specific.
Note: Currently lowering only supports mangling of impls that can viewed
as a single interface (single ImplConstraint).
This allows us to import the table for a given impl only once, while we
can import many ImplWitness instructions with different specifics for a
generic impl.
For example in convert_facet_value_to_narrowed_facet_type.carbon we see
that a single witness table is imported for the BitAnd interface, with
multiple witnesses (for different specifics) imported and sharing the
same table.
The ImplWitnessTable now contains a back-link to the Impl the witness is
for, allowing inst namer to name that interface in the textual semir,
and allowing the interface to be found when debugging from a witness.
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Emitting definitions in check. This resolves the crash in lowering which
necessitated definitions be emitted.
Some of the test changes need further review.
When performing a call through an impl witness, the callee that we
type-check against is the function in the interface, so we form a
specific for that callee. However, once the impl witness access
resolves, the eventual callee is a different function -- the function in
the impl -- so this would cause us to form a `SpecificFunction` where
the callee is one function but the specific refers to a different
function.
Address this by adding another instruction, `SpecificImplFunction`, that
takes a function in an impl and a specific for the corresponding
function in the interface, and computes and returns a `SpecificFunction`
referring to the corresponding specific function in the impl, or returns
a direct reference to the function in the `impl` if it's not a generic
function.
During SemIR, when identifying a specific in a specific context, we'd
have to either look through a specific or through a bound method.
Canonicalize which one to look through first, by having the BoundMethod
created around a SpecificFunction instead.
This changes a lot of check tests.
TODO: As the SemIr does not currently allow removal (access to insts()
is intentionally const), the bound instruction created prior to finding
the specific is not removed from the instructions.
Options: (1) leave as is, (2) add a way to remove the previous bound,
(3) rethink how/when the BoundMethod inst is created.
Resolve instruction id depending on the context from which a function is
called.
Calling a function in a function context that does not have a definition
emitted before reaching lowering will cause a crash. This needs a change
in check/eval layer.
- The actual reason I started this: minor lowering updates in the golden
LLVM IR
- Process.inc changed enough to need a patch context update.
- https://github.com/llvm/llvm-project/pull/123126 added `proto_library`
uses without a `load`, which is broken in bazel 8
- Just commenting these out because we don't use them. I'll follow up
separately about a possible fix, but continuing to use `WORKSPACE` is a
bigger issue LLVM probably should address.
- Note this update is also triggering removal of `migrate_cpp`, in #4887
Include the index rather than the name in the fingerprint of a symbolic
binding. While both the index and the name contribute to the canonical
identity, using either one of them in the fingerprint is sufficient to
ensure that distinct entities get different fingerprints. Changing the
name of a symbolic binding should ideally not result in fingerprint
changes, so exclude the name from the fingerprint when we have an index.
Use the canonical type and constraint when fingerprinting an impl, so
that uses of names in `name_ref` instructions aren't considered, only
the entity the name resolves to, and different ways of spelling the same
type have the same fingerprint. This similarly allows compatible changes
to be made to impls without changing the fingerprint.
Exclude the declaration block when determining the fingerprint of a
declaration. The declaration block contains the declarations of
parameters of the declaration, which do affect whether two declarations
are identical, but not whether they denote the same entity, because it
would be invalid to have different declaration blocks for declarations
with the same name in the same scope. Therefore changes to the
declaration block are compatible, and it's useful for such changes to
not affect the fingerprint.
This is not easy to test in isolation with our current testing
machinery. However, a follow-on PR will change the name of a parameter
in the prelude, and with this in place, will not cause any changes to
occur elsewhere in the toolchain tests.
Instead of including the raw index of the specific, which is unstable
across files and across unrelated changes, use a fingerprint of the
constant values of the specific arguments. This is a placeholder until
we decide on how we want to mangle specific functions.
Add a builtin `"int.convert"` supporting unchecked conversions between
different integer types. This performs a truncation, zero-extension, or
sign-extension, depending on the widths of the operands and the
signedness of the source type. Add explicit `As` support to the prelude.
No implicit conversions are supported yet as we don't have a way to
express the constraint that we can only implicitly convert to wider
types.
Instead of providing operations only for `i32`, provide them for all
`iN` and `uN` types.
For now, this excludes the `*Assign`, `Inc` and `Dec` interfaces,
because the implementations for those are defined as Carbon functions
rather than builtins, and we can't yet lower definitions for specific
functions, so converting those to be generic breaks the build for our
examples.
Non-entry-block allocas will allocate new stack memory each time they're
reached, resulting in leaking stack memory over time for allocas in a
loop. Move all such allocas to the entry block instead, and use an LLVM
intrinsic to mark when the lifetime of the variable actually begins.
Instead of treating `Core.Int` as the toolchain's builtin `IntType`,
model it as a class that adapts the builtin type. This aligns us better
with the intended language model, gives an associated library for
`impl`s involving `Core.Int` to live within, and opens the door adding
member functions to `Core.Int` if we decide that is desirable.
Remarkably it also seems to make the formatted SemIR a little smaller,
because a call to a generic class generates less IR than a call to a
function.
Goal is to reduce churn in names in test updates (by churning a lot of
them in this PR).
---------
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
For the few remaining uses of the builtin `i32` type, manually build an
`IntType(Signed, 32)` value instead. These are:
- The return type of `Run`.
- The type that int literals in an `if` expression are converted into.
- The type of an array index expression.
We should consider converting those three cases away from `i32` over
time.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
When an `IntLiteral` appears as an operand of an `if` expression,
convert it to `i32` for now, so that we don't reject things like `if
cond then 1 else 2` due to having a non-constant value of type
`IntLiteral`.
For tuple indexing expressions such as `(a, b).0`, convert the index to
type `IntLiteral`, not to type `i32`. This isn't strictly necessary to
do in this PR, but avoids the need to provide an `IntLiteral` -> `i32`
implicit conversion for `no_prelude` tests using this syntax.
In this case, the callee may be non-constant because it includes a
reference to `self`, so we need to be able to lower a non-constant
`specific_function`.
Generate declarations of specific functions on demand. Definitions are
not emitted yet, and I'm using a temporary, known-broken scheme for name
mangling.
Richard Smith
Jon Ross-PerkinsandDana Jansens
Chandler Carruth
Alina Sbirlea
