Add `Dependent` value and initializing representations for types whose
representations are unknown because they are dependent. When generating
SemIR in such cases, use a worst-case initializing representation that
both provides a destination address and also propagates a potential
result value.
Use this to fix incorrect lowering and lowering crashes for specific
functions involving generic types that don't use a copy value
representation.
In lowering, be careful to distinguish between whether the initializing
representation for the generic return type uses a return slot (which
affects whether the SemIR declaration and call have one) and whether the
initializing representation for the specific return type uses a return
slot (which affects whether the LLVM IR declaration and call have one).
This is in support of a goal of changing the blanket `destroy` impl to
use (roughly):
```
private fn CanAggregateDestroy() -> type = "type.can_aggregate_destroy";
// Handles aggregate type destruction.
impl forall [AggregateDestroyT:! CanAggregateDestroy()] AggregateDestroyT as Destroy {
fn Op[addr self: Self*]() = "type.aggregate_destroy";
}
```
That isn't done here because there's still other issues that migrating
raises. What this *does* do is add the builtin functions, and in
particular, support to `FacetTypeInfo` to make `CanAggregateDestroy`
work.
The "special requirement" approach in `FacetTypeInfo` allows us to
support restricting a blanket impl under the current approach of impls.
Maybe we'll find a cleaner approach that can work in the future, but
this fits into the current model by propagating similar to other
requirements. I'm using an enum mask because we have a number of similar
things to add (e.g. copy, move) but I'm not sure we need a full vector.
A few alternatives considered were:
- Supporting syntax more like `where .Self impls
TypeCanAggregateDestroy(.Self, SupportedInterface,
UnsupportedInterface)`. I think it'd be a little cleaner, but requires
better compile-time evaluation in order to assess the type of the call.
Right now it's expected to be a `FacetType` too early to make this work,
and I was concerned about pouring too much more time down this route.
- Providing an actual interface, in particular doing name lookup back
into `Core.` for an interface. This would've added name lookup overhead,
and the question of whether an `impl` exists.
- Generating an interface. This avoids the name lookup, but would still
raise the question of whether an `impl` should also be generated. Work
I've previously done generating interfaces for class destruction also
feels complex to both write and understand (an unfortunate issue).
- Still modeling as an `ImplsConstraint`, for example by defining a
special `InterfaceId::CanAggregateDestroy = -2` similar to what we do on
other ids. I was hesitant because of how this expands the number of
modes of `InterfaceId`, and things for consuming code to watch out for,
for what feels like a relatively niche set of use-cases that are only
interface-like.
---------
Co-authored-by: Dana Jansens <danakj@orodu.net>
As proposed in [Carbon: C++ interop for overloaded functions and
function
templates](https://docs.google.com/document/d/1KUxumZtNe3mY3TsjW2s_ZADOlAaFlrtsLKHVILtqIaM/edit?tab=t.0),
Clang is used to perform the overload resolution using C++ rules, when
an overloaded C++ set is called from Carbon. Once a function is
selected, it's converted into a Carbon function and called using the
Carbon rules including argument conversions.
A single non-templated function is treated the same way as an overload
set and the same rules apply for its call.
Template functions are not supported yet.
Demo:
a) Non-templated function calls:
```c++
// --- overloads.h
auto foo(int a, short b) -> void;
auto foo(double a) -> void;
auto foo(int a) -> void;
```
```c++
// overloads.cpp
#include "overloads.h"
#include <cstdio>
auto foo(int a, short b) -> void {
printf("hello from foo_int_short(%d, %d) \n", a, b);
}
auto foo(double a) -> void { printf("hello from foo_double(%f) \n", a); }
auto foo(int a) -> void { printf("hello from foo_int(%d) \n", a); }
```
```c++
library "Main";
import Cpp library "overloads.h";
fn Run() -> i32 {
Cpp.foo(1.1 as f64);
return 0;
}
```
```
$ clang -c overloads.cpp
$ bazel-bin/toolchain/carbon compile main.carbon
$ bazel-bin/toolchain/carbon link overloads.o main.o --output=demo
$ ./demo
hello from foo_double(1.100000)
```
b) Constructors:
```c++
// --- constructor_overloads.h
class C {
public:
C();
C(int a, int b);
};
```
```c++
// constructor_overloads.cpp
#include "constructor_overloads.h"
#include <cstdio>
C::C() { printf("hello from C() \n"); }
C::C(int a, int b) { printf("hello from C(%d, %d) \n", a, b); }
```
```c++
library "Main";
import Cpp library "constructor_overloads.h";
fn Run() -> i32 {
let c1: Cpp.C = Cpp.C.C();
let c2: Cpp.C = Cpp.C.C(1, 2);
return 0;
}
```
```
$ clang -c constructor_overloads.cpp
$ bazel-bin/toolchain/carbon compile main.carbon
$ bazel-bin/toolchain/carbon link constructor_overloads.o main.o \--output=demo
$ ./demo
hello from C()
hello from C(1, 2)
```
Follow-ups:
- `Cpp.foo({})` - proper handling of struct literals as call args.
- Fix access for overloaded sets.
- Fix tests:
- Method calls: `error: missing object argument in method call
[MissingObjectInMethodCall]` in tests.
- Fix `toolchain/check/testdata/interop/cpp/import.carbon` test.
- Fix `enums` support.
- Fix `str` -> `std::string_view` mapping.
Part of #5915
This proposal renames the syntax used to mark an overriding definition
of a virtual method from `impl fn` to `override fn` to avoid ambiguity:
besides indicating an overriding virtual function, it can be parsed as
an "impl" declaration when the construct following "impl" begins with a
lambda introduced by "fn".
Closes#5711
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
This prevents a null pointer access crash when generating a thunk with
an automatically deduced trivial return type.
In this case, Clang calls `Sema::DeduceFunctionTypeFromReturnExpr()`
which calls `Sema::getReturnTypeLoc()`, which requires this information.
Part of #5514.
When returning a value from a function whose return type has a by-copy
initializing representation, perform initialization like we do when the
return type has an in-place initializing representation. This makes our
SemIR representation more uniform, as the return expression will now
always be an initializing expression rather than a value expression, but
more importantly it means that attempts to return a non-copyable type by
value now fail, even if the type has a by-copy initializing
representation.
This catches a bunch of places where we were returning a value of an
unconstrained template parameter `T:! type`, which we were incorrectly
allowing because we didn't notice it was not copyable. Unfortunately
this then requires quite a few test updates.
Like #6034, this exposes a lowering issue where lowering crashes when
attempting to lower a specific copy operation for certain types; a
couple more tests are temporarily disabled here. An upcoming PR
dependent on this one will fix the issue and re-enable those tests.
Instead of hardcoding which types are copyable, add a `Core.Copy`
interface to perform copying. Move almost all the current copy support
to that interface. Some remaining pieces are still using builtin logic
after this PR:
* For tuples and structs, builtin logic is used to perform elementwise
copies. This also supports copying *adapters of* tuples and structs,
which seems like it may not be desirable, especially for non-extending
adapters. A `Copy` impl is provided for tuples of at most 2 elements, so
that `Core.Copy` constraints are satisfied, but we can't implement this
generally until we have variadics support, and don't yet have a
mechanism to generalize this to structs.
* For `enum` types imported from C++, builtin logic is used to perform a
copy. This is temporary until we have a mechanism to identify these
types from an impl in the prelude.
One lowering test in `toolchain/lower/testdata/class/generic.carbon` is
disabled for now, as it causes a crash in the lowering code due to an
ABI mismatch between the call signature in the lowered declaration of a
specific function and the call that is generated in the specific callee.
Fixing this is a little involved, and will be done in a separate PR.
---------
Co-authored-by: Geoff Romer <gromer@google.com>
This avoids impl lookups involving, say, `Core.Int` pulling in all ~65
impls in "prelude/types/int", which resulted in a lot of unnecessary
importing work, followed by a lot of unnecessary inst namer and inst
formatter work.
Before:
```
Ran 1335 tests in 6186 ms wall time, 146818 ms across threads
Slowest tests:
- toolchain/check/testdata/interop/cpp/function/arithmetic_types_bridged.carbon: 5611 ms, 5532 ms in Run
- toolchain/check/testdata/interop/cpp/function/operators.carbon: 2034 ms, 1981 ms in Run
- toolchain/check/testdata/primitives/import_symbolic.carbon: 1796 ms, 1786 ms in Run
- toolchain/lower/testdata/operators/arithmetic.carbon: 1729 ms, 1728 ms in Run
- toolchain/lower/testdata/function/generic/call_recursive_sccs_deep.carbon: 1700 ms, 1697 ms in Run
[==========] 1335 tests from 1 test suite ran. (682 ms total)
```
After:
```
Ran 1335 tests in 2419 ms wall time, 109587 ms across threads
Slowest tests:
- toolchain/check/testdata/interop/cpp/function/arithmetic_types_bridged.carbon: 1748 ms, 1665 ms in Run
- toolchain/check/testdata/interop/cpp/function/operators.carbon: 1106 ms, 1057 ms in Run
- toolchain/lower/testdata/function/generic/call_recursive_diamond.carbon: 1044 ms, 1041 ms in Run
- toolchain/lower/testdata/function/generic/call_recursive_sccs_deep.carbon: 1015 ms, 1012 ms in Run
- toolchain/lower/testdata/operators/arithmetic.carbon: 998 ms, 997 ms in Run
[==========] 1335 tests from 1 test suite ran. (652 ms total)
```
That's still slower than it should be, but a large improvement
nonetheless.
Fixes#6029
This uses each vector's size as a barrier between lists, to eliminate
the possibility of incidental collisions between entries of different
lists. This is the same as is done inside `AddBlock`.
Attach the cleanup to the `Temporary` instruction instead of to the
`TemporaryStorage` instruction. We create `TemporaryStorage`
instructions speculatively when creating an initializing expression, and
may overwrite those instructions with other instructions if it turns out
that a temporary is not required. Instead, wait until we finalize the
temporary and create a `Temporary` instruction to register the cleanup.
* Treat `MaybeUnformed` and `partial` as qualifiers, like `const`.
* Allow pointer conversions to add qualifiers.
* Allow unsafe pointer conversions to remove qualifiers.
* Allow conversions on non-reference expressions to drop `const`.
* Allow unsafe conversions on any expression to drop `const`.
* Allow unsafe conversions on non-initializing expressions to drop
`partial`. For initializing expressions, we should initialize the
vptr when dropping `partial`; this is not yet supported so we reject.
* Allow conversions on reference expressions to add `MaybeUnformed`.
* Allow unsafe conversions on reference expressions to drop
`MaybeUnformed`. For non-reference expressions, additional work is
required, because the value / initializing representation may not
match between `T` and `MaybeUnformed(T)`, so those are rejected for
now.
When importing a class definition, don't ask for the class layout if the
definition is invalid. Avoids an assertion failure in Clang.
---------
Co-authored-by: Dana Jansens <danakj@orodu.net>
Added tests for different character types.
`char` is currently not in primitives prelude, so had to use full
prelude.
C++ Interop Demo:
```carbon
// main.carbon
library "Main";
import Cpp inline '''
auto output_char(char c) -> void {
printf("%c", c);
}
''';
fn Run() -> i32 {
let msg: array(Core.Char, 13) =
('H', 'e', 'l', 'l', 'o', ' ', 'w', 'o', 'r', 'l', 'd', '!', '\n');
for (c: Core.Char in msg) {
Cpp.output_char(c);
}
return 0;
}
```
```shell
$ bazel-bin/toolchain/carbon compile main.carbon
$ bazel-bin/toolchain/carbon link main.o --output=demo
$ ./demo
Hello world!
```
Part of https://github.com/carbon-language/carbon-lang/issues/5263.
We assume these types have the same representation. For now, that will
only be the case for libc++ on 64-bit targets, because libc++ puts the
size field first, and `Core.String` always uses a 64-bit size field even
on 32-bit targets.
---------
Co-authored-by: Chandler Carruth <chandlerc@gmail.com>
We import C++ enum types as Carbon class types as adapters for the
corresponding builtin integer type, and we import enumerator constants
as integer constants of that class type.
No operators are supported on such values for now; eventually once we
start asking Clang to implement operators on C++-owned types, these
types should be handled in the same way. However, they can be converted
to the corresponding integer type with `as` via adapter conversion, and
integer builtin functions can operate on them.
Based on #5948. A couple of tricky parts:
* When generating the C++ side of the thunk, we are given a pointer to
the location to emplace the return value. The only mechanism C++
provides to perform this emplacement is using placement `operator new`,
which requires a library function in the `<new>` header. We handle this
by declaring that library function ourselves, and rely on Clang not
actually needing a definition for it (which the standard library owns).
* On the Carbon side of the thunk, we want to form an initializing
expression as the result of the call. We don't have a way of expressing
in SemIR that an initializing expression performs its initialization by
storing through a pointer, so this PR adds a new initializing
instruction, `InPlaceInit`, to model an initialization that's performed
opaquely in-place.
Fix the algorithm for importing declarations in dependency order to
properly walk the dependency graph. Add the parent declaration of a
declaration to the dependency set so that we have a parent declaration
context to import a declaration into.
Fixes a crash when attempting to import a class whose parent is not
imported.
Generalize the f64 support to support other sizes. Also provide interop
support for `float`, `_Float16`, and `__float128`.
Also lay some groundwork for non-standard floating-point types, though
we don't have any syntax to name them yet.
The main change here is that a bad type appearing somewhere within a
field or base class of a class shouldn't cause an import of that class
to fail. Instead, only that field or base class becomes inaccessible
from Carbon.
Also improve the way that type importing errors are diagnosed. While we
lose the precision of a diagnostic saying why a type is not supported,
we gain a useful source location for where the type was mentioned in C++
code.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Don't convert to f64 until we know that's the type that we actually
want. Also reimplement the conversion from RealId to FloatId to perform
an exact conversion with a real check for overflow, rather than
performing an approximate conversion via the host `double` type.
Unfortunately, LLVM doesn't expose its integer mantissa and exponent to
APFloat conversion, so we convert the RealId back to a string for now.
The LLVM conversion also detects overflow only if the literal would
round to having an out-of-range exponent, not if the literal is outside
the range of values of the type as the Carbon design expects. It's not
clear to me which rule we actually want here, so for simplicitly I'm
using the LLVM rule for now.
In preparation for adding other floating-point types beyond f64.
* Rename the type.
* Change lowering to lower FloatLiteralType values as the placeholder
`{}` value we use for literals instead of as an LLVM f64.
* Change eval to convert the type as part of a floating point
conversion, so that lowering can lower converted constants properly.
For now we still represent a value of FloatLiteralType as a
double-precision APFloat. (That will need to change so that we can
losslessly convert literals to f80 / f128 values, and so that we can
convert literals to f32 values without double-rounding.)
The self access is important; for the test `generic_class.carbon` being
added to `toolchain/check/testdata/class/destroy_calls.carbon`, it was
using `%T.as.Destroy` instead of `%D.as.Destroy`, indicating the default
blank impl was being used instead of the type-specific version. That
test is trying to focus on the issue, but the delta is visible in a
couple other files in this PR, for example
`toolchain/check/testdata/class/generic/init.carbon`.
I'm separately working on getting rid of the default impl, which is how
I noticed this.
Add missing builtins for float compound assignment, for building a
FloatType, and for converting a float literal to FloatType. Switch
`Core.Float` to being a class and add impls for the various
floating-point operators.
---------
Co-authored-by: google-labs-jules[bot] <161369871+google-labs-jules[bot]@users.noreply.github.com>
Co-authored-by: Carbon Infra Bot <carbon-external-infra@google.com>
When initializing a C++ thunk parameter:
* If we have an initializing expression, materialize a temporary and
pass its address.
* If we have a reference expression, pass its address directly.
* If we have a value expression with a pointer value representation,
pass the pointer.
* Otherwise, create a new temporary and initialize it with a copy of the
argument, and pass its address.
Use it to dump the AST that includes a generated C++ thunk.
Based on #5917.
Also added printing of the full actual text when check fails to make
debugging easier.
Changed line replacement to allow removing complete lines.
Part of #5514.
I was thinking about this for destruction, which I may not be able to
use it for, but still think this may be a good change to keep features
consistent.
When the C++ function has a parameter that is not a pointer and not a
signed integer of 32 or 64 bits, generate a thunk.
Terminology:
* Callee function: The C++ function we actually want to call.
* Thunk function: The C++ function we generated that calls the callee
function.
* A simple ABI type, for now, is one of:
* A pointer
* signed integer with 32 bits
* signed integer with 64 bits
The thunk function is marked `always_inline` and uses the `asm`
attribute to set its mangled to the callee function mangled name
suffixed with `".carbon_thunk"`.
When importing a C++ function, we decide whether calling it requires a
thunk and if so we generate it and import it as well, which is currently
a recursive call.
When calling the thunk function, we initialize a temporary storage for
each non simple ABI parameter type and take its address. This can be
optimized when the variable is already in storage.
Not supported yet:
* Functions with non void return values.
* Member methods.
Moved unsigned int param test from `arithmetic_types_direct.carbon` to
`arithmetic_types_bridged.carbon`, since only signed integers aren't
bridged using a thunk.
C++ Interop Demo:
```c++
// hello_world.h
struct S {
S() {}
S(const S&) { x = 1; }
int x;
};
void hello_world(S s);
```
```c++
// hello_world.cpp
#include "hello_world.h"
#include <cstdio>
void hello_world2(S s) { printf("hello_world2: %d\n", s.x); }
void hello_world(S s) {
printf("hello_world: %d\n", s.x);
hello_world2(s);
}
```
```carbon
// main.carbon
library "Main";
import Cpp library "hello_world.h";
fn Run() -> i32 {
var s : Cpp.S;
Cpp.hello_world(s);
return 0;
}
```
```shell
$ clang -c hello_world.cpp
$ bazel-bin/toolchain/carbon compile main.carbon
$ bazel-bin/toolchain/carbon link hello_world.o main.o --output=demo
$ ./demo
hello_world: 1
hello_world2: 1
```
Before this change (no thunk - copy constructor not called when calling
`hello_world()`):
```shell
$ ./demo
hello_world: -1219172304
hello_world2: 1
```
This adds support for importing C++ code directly from source rather
than via a `#include`.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
In preparation for `FloatValue` being used more generally, and not only
for literals.
---------
Co-authored-by: google-labs-jules[bot] <161369871+google-labs-jules[bot]@users.noreply.github.com>
Although this focused on `Destroy` support, some choices here around
`implicit_type_impls` are because copy/move will likely follow a similar
approach. I'm trying not to predict too much about how we'll structure
those, but I'm putting `Destroy` impl logic in a file that could perhaps
be shared with those. They'd likely be interested in similar things,
e.g. traversing members of types (particularly class, struct literal,
tuple literal).
At present this sets the destroy function as `no_op` which is consistent
with current logic, but has a TODO to correctly define.
Constant importing for functions changes slightly due to some issues I
was having with `GetFunctionType`. zygoloid suggested this approach to
avoid `EvalInst` logic.
Adds a flag for controlling whether to generating these impls. While
this does generation for `class`, as noted above this'll also need to be
done for tuples and struct literals, which would leave the `none.carbon`
min_prelude unable to use any types. Note if destruction *would* occur,
it'll still look up `Core.Destroy` for that and fail, but that's already
true of any test using `none.carbon`. I'm trying to use the flag to see
if we can keep `none.carbon` working mostly-consistently.
I'd tried separating out the flag to #5852, but that got a lot of
pushback over whether the behavior was appropriate. I'm hoping that the
interactions here make it clearer why the particular approach -- the
goal is not to enable advanced testing, or create some new end-user
behavior that we really support, it's just to keep no-prelude tests
functional. The main question raised there was why not just keep
generating `impl T as Core.Destroy` if `fn destroy` is present -- but I
think here it should be apparent that would require additional
complexity, as the generation of `impl T as Core.Destroy` is not
currently conditioned based on the implementation of `fn destroy`. I'd
rather add complexity to this flag only if it's enabling interesting
test functionality.
---------
Co-authored-by: Geoff Romer <gromer@google.com>
Instead of taking the complete text of the Clang diagnostic and using it
as the message portion of a Carbon diagnostic, generate the individual
pieces separately and pass them into the Carbon diagnostic
infrastructure.
* Clang's context lines are generated by running a custom "diagnostic
renderer" and tracking which lines it wants to print as context for a
given source location. When mapping from a C++ source location back to a
Carbon location, the Carbon `Loc` structure is now fully populated,
including filling in the context line and the column number.
* Clang's snippet is generated by running a custom diagnostic renderer
that is a cut-down version of the full text diagnostic renderer that
only prints a snippet. This is then attached to the Carbon diagnostic
manually as an override for the snippet we'd usually create.
We no longer repeat the file location twice on each diagnostic, and no
longer produce a bogus "in import" line for all locations coming from
clang that point arbitrarily to the first C++ import in the Carbon file.
The `[diagnostic kind]` marker is now displayed at the end of the
diagnostic message, not on a line of its own after the snippet.
When attempting to import a definition of a class with virtual bases,
diagnose the point of use instead of the point of definition of the
class.
---------
Co-authored-by: Chandler Carruth <chandlerc@gmail.com>
When importing a class definition, ask Clang to complete it first. This
causes class template specializations to get instantiated as needed when
the type-checking of Carbon requires a C++ class to be complete. It also
allows Clang to implement things like modules-aware definition
visibility checking.
Don't reject importing a class with a virtual base if it's never
required to be complete. Instead, defer diagnosing until the definition
is required.
This also removes the recursion from `MapType`, as mapping a class type
no longer maps its definition.
In order to get diagnostics from instantiation failures, fix a bug that
caused any Clang diagnostics produced after the initial building of the
`ASTUnit` to get discarded. This exposed some duplicate diagnostic
issues in `ImportNameFromCpp` which are fixed here too.
Previously we would drop these diagnostics; now periodically flush them
to Carbon's diagnostics emitter. We flush them at the end of checking,
and also immediately before changing the set of diagnostic annotation
scopes, so that Clang diagnostics get properly annotated.
This exposes some double diagnostics being produced in situations where
Clang's name lookup logic would produce a diagnostic and we also
produced one. For access control issues, use the Carbon diagnostic, in
order to properly handle protected access. For ambiguity issues, use the
Clang diagnostic that produces helpful notes.
Also fix rendering of note diagnostics produced by Clang, by attaching
them to the prior error / warning diagnostic.
---------
Co-authored-by: Boaz Brickner <brickner@google.com>
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Richard Smith
Jon Ross-PerkinsandDana Jansens
Ivana Ivanovska
Elliott KaltandRichard Smith
Boaz Brickner
