This turns `Cpp` into a keyword, and makes it map to `NameId::Cpp` and
`PackageNameId::Cpp`.
Per discussion with zygoloid, the keyword versus identifier question is
deliberately kept open by #4846. This PR switches to a keyword because
mapping to a specific `PackageNameId` works best with a special `NameId`
not backed by an `IdentifierId`. We could in theory make it work using
`IdentifierId` or a runtime-tracked `PackageNameId` for `Cpp` (e.g.
stored on `SemIR::File`), but this approach is consistent with `Core`
and so seemed like a good starting point.
---------
Co-authored-by: Dana Jansens <danakj@orodu.net>
Right now, the class destroy impl is incorrectly generated (first
discussed [in
Discord](https://discord.com/channels/655572317891461132/941071822756143115/1418614787449032826)).
If we want it to be correct, deferred definition logic would need to be
added, and the declaration would need to be moved inside the `class`
scope (along with whatever generic logic that needs).
This instead switches to a blanket impl, to avoid creating latent bugs
with generating the `impl` and function body in the wrong scope. This
approach uses the same blanket impl as aggregate destruction that was
added by #6098.
The intent here is to allow progress on other parts of `Destroy`. For
example, under this model the implementation of the function body could
be done as part of lowering the specific.
This takes the debug runtime of
`toolchain/check/testdata/interop/cpp/function/arithmetic_types_bridged.carbon`
from 4.7s down to about 4s (so 15% faster overall).
There's still lots of room to improve this test which seems to be
hitting lots of pathological behaviour, but InstNamer is 30% of the
runtime, with fingerprinting's `InstFingerprinter::GetOrCompute`
consuming 10% of cycles. We reduce its impact by using a vector of
vectors instead of a Map for the cache of fingerprints. After this
change InstNamer drops below 24% of the runtime.
Also move the instruction name when giving it to `AllocateName` since it
receives std::string by value, though this doesn't show up in the
profile for the test.
Trying to figure out an easy way to debug semir in the prelude, #5703
removed an option to set `--exclude-dump-file-prefix` to empty. But,
this is probably an improvement over that flow... With this change, it's
possible to add `//@dump-sem-ir-file` to a specific prelude file, and
its full IR will be printed. Additionally, it becomes an option with the
default `--dump-sem-ir-ranges=only` to add `//@dump-sem-ir-file` and get
the full file's IR.
Use it to dump the AST that includes a generated C++ thunk.
Based on #5917.
Also added printing of the full actual text when check fails to make
debugging easier.
Changed line replacement to allow removing complete lines.
Part of #5514.
This adds support for importing C++ code directly from source rather
than via a `#include`.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Although this focused on `Destroy` support, some choices here around
`implicit_type_impls` are because copy/move will likely follow a similar
approach. I'm trying not to predict too much about how we'll structure
those, but I'm putting `Destroy` impl logic in a file that could perhaps
be shared with those. They'd likely be interested in similar things,
e.g. traversing members of types (particularly class, struct literal,
tuple literal).
At present this sets the destroy function as `no_op` which is consistent
with current logic, but has a TODO to correctly define.
Constant importing for functions changes slightly due to some issues I
was having with `GetFunctionType`. zygoloid suggested this approach to
avoid `EvalInst` logic.
Adds a flag for controlling whether to generating these impls. While
this does generation for `class`, as noted above this'll also need to be
done for tuples and struct literals, which would leave the `none.carbon`
min_prelude unable to use any types. Note if destruction *would* occur,
it'll still look up `Core.Destroy` for that and fail, but that's already
true of any test using `none.carbon`. I'm trying to use the flag to see
if we can keep `none.carbon` working mostly-consistently.
I'd tried separating out the flag to #5852, but that got a lot of
pushback over whether the behavior was appropriate. I'm hoping that the
interactions here make it clearer why the particular approach -- the
goal is not to enable advanced testing, or create some new end-user
behavior that we really support, it's just to keep no-prelude tests
functional. The main question raised there was why not just keep
generating `impl T as Core.Destroy` if `fn destroy` is present -- but I
think here it should be apparent that would require additional
complexity, as the generation of `impl T as Core.Destroy` is not
currently conditioned based on the implementation of `fn destroy`. I'd
rather add complexity to this flag only if it's enabling interesting
test functionality.
---------
Co-authored-by: Geoff Romer <gromer@google.com>
This is trying to make it clearer when vectors are being indexed with
`CheckIRId`.
The only one that I still kind of want to change is the
`SmallVector<std::unique_ptr<CompilationUnit>>`, but because it's a
`unique_ptr` that's a little more complex. I may not bother.
Note, some of the changes around nuanced `SmallVector` interactions were
based on trying to copy the way `SmallVector` itself takes arguments,
like with range passing.
Stop using the clang tooling library to build an ASTUnit; that library
is set up to process clang frontend arguments, assuming that something
has already built frontend arguments from the compiler arguments. It is
also too encapsulated and doesn't let us inspect and modify the compiler
invocation before it's executed.
Instead, build the AST unit directly in two phases:
* FIrst, take a list of clang driver arguments and convert them into a
list of compiler arguments, using `clang::createInvocation`. Internally,
this uses the clang driver to build a frontend invocation, including
building system-specific include paths as needed.
* Then, directly build an ASTUnit from this compiler invocation.
I've factored this so that we can split out the `createInvocation` step,
with the intention that we may want to move it out of check and into the
carbon driver with the rest of the driver-level argument handling, and
we may want to customize some of the clang options before we invoke the
clang frontend with that set of options.
In order to make the invocation reusable, it no longer depends on the
name of the carbon file importing the C++ code. In place of synthesizing
a header file name as `<foo.carbon>.generated.cpp_imports.h`, we now
insert line marker directives into the generated header so that errors
in that header cause Clang to point a diagnostic back at the Carbon
source file itself. This results in a minor improvement in the
diagnostic output: we no longer refer to a nonexistent generated file.
But the snippet still contains text that doesn't match the source code,
so it remains imperfect.
---------
Co-authored-by: Chandler Carruth <chandlerc@gmail.com>
By moving dumping, we can have dumping occur before verification that
might CHECK-fail (e.g. parse tree and llvm IR verification).
I'm dropping vlogging of raw semir. It was only done when dumping, so
`-v` would print zero copies and `-v --dump-raw-sem-ir` would print two
copies. The lack of complaints about this suggests it's not needed.
I'm making a small change to drop newlines between textual and raw
semir. This is an edge case so I don't expect people to really notice in
general, but it seemed unusually aware of what's on a stream, and it
made it harder to do the dump_stream/raw_dump_stream approach, which I
felt would be decent in general, since check is the only phase that can
emit two different things (which I could also just drop -- we don't
really use raw semir anymore, it doesn't seem like a big need to be able
to print it with textual semir, but I'm assuming to just maintain
existing behavior).
In parse, we were previously dumping the tree on verification errors.
I'm removing that because now `--dump-parse-tree` should work fine,
where previously it wouldn't.
I've been mulling this mainly for the parameter complexity of
check/lower, but doing lex/parse for symmetry.
I'm motivated by the plan to move dumping for all of them into the
respective functions, because of discussion about llvm-verifier. That
basically would add another bool parameter (or more) to each of these.
My instinct is we're going to probably accrue a little more over time,
so I'm suggesting this as maybe adding the boundary a little simpler
and/or easier to read.
Note it may make sense to refactor a little further, e.g. maybe
Lower::Context could receive the full set of options and pick out what
it wants, but I figured creating the struct itself would be a decent
start.
I'm trying to put things into options when we can produce a reasonable
default if the user doesn't assign a value. I'm using an explicit
constructor so that values can be added without affecting every caller.
A different factoring would be to pass in everything through the param
struct, but that just felt weird when I was trying it out.
Removing `inst_namer` and `module_name` from `LowerToLLVM` params --
both of these can be inferred from `sem_ir`, and I'm not seeing a
particular reason to maintain them at the call site.
This requires:
* Making `FunctionDecl` mutable since generating code
(`HandleTopLevelDecl()`) requires a mutable declaration and since we
manually add `used` attribute to force code generation.
* Passing the file system to `Lower` since it's needed by Clang code
generation.
* Creating an internal Clang LLVM module and link it against the Carbon
LLVM module.
Demo:
```c++
// hello_world.h
extern int puts;
inline void hello_world() {
((int (*)(const char*))&puts)("hello world");
}
```
```carbon
// main.carbon
library "Main";
import Cpp library "hello_world.h";
fn Run() -> i32 {
Cpp.hello_world();
return 0;
}
```
```shell
$ bazel-bin/toolchain/carbon compile main.carbon
$ bazel-bin/toolchain/carbon link main.o --output=demo
$ ./demo
hello world
```
Based on https://github.com/carbon-language/carbon-lang/pull/5406.
Part of #5405.
Right now we construct `tree_and_subtrees_getters` a couple different
ways, it's just not obvious because one's abstracted in `check`. But
also, when formatting IR, we'll repeatedly do the `IncludeInDumps`
string check, which felt odd to me since it only needs to be calculated
once per IR.
This also shifts `CheckIRId` selection a little earlier, and in doing so
makes `CheckParseTrees` accept a sparse `units` argument. I actually
think this is a positive: it makes `CheckIRId` a little more stable
across possible command lines, when file loading fails (which is the
only time that a file will have a `CompilationUnit` but not a
`Check::Unit`).
Trying to build on the shared issue between these, I'm adding a
`MultiUnitCache` to store the calculated arrays. For the subtree
getters, this is very minor and avoids at most one incremental array
construction (moving logic out of `CompileSubcommand::Run` might be the
bigger benefit). For `include_in_dumps`, when dumping SemIR, this is
changing a calculation run once per entity (in each IR) to be calculated
once per IR (globally), i.e. O(M*N) -> O(N).
Note this seems to be marginal for performance of file_test:
- Before: Stats over 10 runs: max = 5.3s, min = 4.7s, avg = 4.9s, dev =
0.2s
- After: Stats over 10 runs: max = 4.9s, min = 4.7s, avg = 4.8s, dev =
0.1s
I was mainly thinking about this in the context of dumping SemIR ranges.
There, the impact may actually decrease because a range won't do any
cross-IR printing. But, I'm expecting to add another layer for whether
we're printing IR for a file, and that made the `should_format_entity`
callback stick out for me.
Given the namespacing of `Diagnostics` in #5173, now we can use
`DiagnosticEmitter` for phase-specific emitters. This is consistent with
how we do `Context`, and also check had started this with
`DiagnosticBuilder` in anticipation of the namespacing.
Also renames `Emitter::DiagnosticBuilder` to `Emitter::Builder` for
consistency with other `Diagnostics` entities.
In check, I'm still splitting `DiagnosticEmitterBase` and
`DiagnosticEmitter` just to keep the emitter definition separate from
the context.
Also cleans up some incorrect check diagnostic emitter dependencies in
lower.
What this really does is avoids shadowing names, so that we can
comfortable have things like `Check::DiagnosticEmitter` or
`Check::DiagnosticLoc` without shadowing being a concern.
Note, down this path I'm also thinking about:
- Renaming misc DiagnosticConsumer/DiagnosticEmitter classes, possibly
just to DiagnosticConsumer/DiagnosticEmitter (so
`Check::DiagnosticEmitter` instead of `SemIRLocDiagnosticEmitter`).
- Dropping `Diagnostic` from `Emitter::DiagnosticBuilder`.
- But not for `Check::DiagnosticBuilder`, because `Check::Builder` would
be ambiguous.
- Renaming diagnostics/diagnostic_* to drop "diagnostic".
[Discussion about SemIRLoc ->
DiagnosticLoc](https://discord.com/channels/655572317891461132/655578254970716160/1353771570463768698)
reminded me of this (in particular the older [Check::DiagnosticBuilder
discussion](https://discord.com/channels/655572317891461132/655578254970716160/1344363562608627763)),
but I'd only do that rename if there's matching consensus about a path
forward where we keep SemIRLoc, and in a way that it's only ever used
for diagnostics (the divergence from which is at the root of current
LocId discussion).
I'm trying to keep that separate from a namespace addition for clarity.
Change representation of package names from `IdentifierId` to
`PackageNameId`, and add a special value `PackageNameId::Core` for the
Core package. Add a `Core` expression to name the Core package, and
support for parsing the `Core` keyword in `package` and `import`
declarations.
For now, I've made no changes to instruction fingerprinting or name
mangling. This means that fingerprints and mangled names will collide
between names in the `Core` package and names in a `r#Core` package. See
#4908.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
At present, we typically define a DiagnosticConverter, then store an
instance of it and a DiagnosticEmitter that wraps it. This is relatively
minor in general, but I've been trying to create more self-contained
DiagnosticEmitter classes (which hold their own DiagnosticConverter,
similar to NullDiagnosticEmitter), and there it just gets in the way.
Since we don't reuse DiagnosticConverter instances, this combines the
definition into DiagnosticEmitter. Mainly this means we don't have a
separate object in play, and less to carry around.
The most impact is probably to SemIRDiagnosticConverter, which was also
the most complex. Now `SemIRLocDiagnosticEmitter`, this gets some
different construction flow. Note in the PR I've split the file rename
to its own commit, to try to help delta views. However, the most
substantial parts of the refactoring are split into #4876, which this
depends upon.
This is a followup from #4834, I searched for "invalid" uses in our
codebase. This is mostly changing comments, and a couple debug
functions, but shouldn't affect testable behavior.
Note a couple things I'll highlight as not changing (but could) are:
- `ReturnTypeInfo::is_valid`
- `"invalid"` uses in the formatter
- `AddInvalid` for `!has_value` in `inst_fingerprinter` (because the
cases it's called sound invalid-ish)
High level, replacing `Id::Invalid` with `Id::None` and `Id::is_valid`
with `Id::has_value` for clarity, as discussed
[here](https://discord.com/channels/655572317891461132/655578254970716160/1331664574545395794).
The `IntId` refactoring is needed together with `AnyIdBase` because it's
also used with `ValueStore`.
Note, trying to be careful not to rewrite `EnumBase::InvalidIndex`, or
`is_valid` in general (e.g., `IdKind::is_valid`).
I've tried to sequence commits here:
1. Automatic replacements:
- `((?:Id|Index)(?: |::|\(|Base(?:\(|::)))Invalid((?:Index)?\W)` ->
`$1None$2`
- `<invalid>` -> `<none>`
- `InvalidNodeId` -> `NoneNodeId`
- `/\*invalid\*/` -> `/*none*/`
- `id((?:_|\(\))(?:\.|->))is_valid` -> `id$1has_value`
2. Manual edits:
- In `int.h` and `int_test.cpp`
- `IntT` has `is_value`, which I'm renaming to `is_embedded_value`.
- Manual edits to comments in this file.
- `AnyIdBase` and `IdBase`
- Declaration of `is_valid` -> `has_value`, `InvalidIndex` ->
`NoneIndex`.
- In `ids.h` and `ids.cpp`
- `is_valid` -> `has_value`
- `// An explicitly invalid ID.` -> `// An ID with no value.`; similar
for index
- Various math on `InvalidIndex` -> `NoneIndex`
- Various mentions of "valid" in comments
- In `value_store.h`, for `IdT::Invalid`, plus one comment
- In `impl.h` and `tokenized_buffer.h`, we had different initialization
of `::None` values (versus `ids.h` syntax) that I fixed manually.
- Spot checks to compile
- Particularly where `is_valid` replacements didn't catch spots due to
different naming.
3. Autoupdate tests
4. verbose.carbon (NOAUTOUPDATE)
5. Comment spot checks
Note there are probably other mentions of "Invalid" that should be swept
up, but I'd like to argue for merging and separating out remaining
cleanup since this is so sweeping (and likely to hit merge conflicts
from churn). We'll probably have lingering mentions of "invalid" for a
bit regardless, just because there are uses of "invalid" in non-Id APIs.
This is primarily moving code around, to try to create a logical split
of the code in check.cpp, makingthe API boundaries clearer.
There's one small, deliberate logic change around false returns from
`HandleParseNode`, where before there was a `CARBON_CHECK` instantiated
by the `#define` (per `NodeKind`), and now it's outside the `#define`
(done mainly because the message didn't keep up with the `Handle##Name`
-> `HandleParseNode` rename).
This is a preparation change for adding name poisoning support
(https://github.com/carbon-language/carbon-lang/issues/4622), which is
expected to require more elaborate logic around NameScope since a name
can be not defined yet, defined, or poisoned.
The API separates looking up a name from getting the full entry since we
have cases where the entries are invalidated between the time we're
looking for the name and when we access (and sometimes modify) the
entry.
This change has the following benefits:
* `names` and `name_map` are internal to `NameScope` and are guaranteed
to match.
* `extended_scopes` and `import_ir_scopes` can not be manipulated (only
new scopes can be added).
* `inst_id`, `name_id` and `parent_scope_id` are constants.
* `has_error` can only be mutated from false to true.
---------
Co-authored-by: jonmeow <jperkins@google.com>
The offsets were originally added to deal with churn from builtins in
the raw semir. In textual semir, we mostly see instruction IDs for
imports, and builtins have also settled down more.
On imports, where possible, use the `EntityNameId` for an import instead
of printing an instruction. Next, show the source location if we have a
node. Only show the instruction if there's no location.
This also exposes `Parse::Tree` and `TokenizedBuffer`, so that we can
pass a `SemIR::File` without the component parts. In particular this
allows us to get the `TokenizedBuffer` for import IRs without
substantial structural modifications. We may want to make these optional
for serialized `SemIR` later, but the nodes/tokens contain source
location, which we'd need for debug information -- so it's not clear how
much we can really make them optional without substantial information
loss.
Reduce arguments to just `File` in a few spots, as a result of the
accompanying `TokenizedBuffer` and `Parse::Tree`. Also updates style to
pass around `const File*` where the reference is maintained, instead of
`const File&`.
I was considering keeping a direct reference to the tree and tokens on
`Context`, but initially my thought was it wouldn't make much
difference. I can re-add those if desired, just as direct caching of the
`File` fields.
This is really a set of closely related changes:
1) We really shouldn't be creating a Check::Unit for _Lower_. This fixes
that by storing the diagnostic converter for reuse.
2) Rather than passing in node converters to Check as their own array,
pass diagnostic converters as part of Check::Unit.
3) To support creating the converters early, pass SemIR::File
pre-constructed.
4) Since SemIR::File construction was used to track "checked", add
`is_checked` for that.
5) Clarifies a subtle edge case around `input_filename_` use with `-`.
Note the key consequence of this change, where I actually started, is
that `Check` only has one array of `Check::Unit` instead of receiving
`NodeLocConverter` as a separate array.
I'm looking at adding more significant logic to checking, particularly
for interop. But check.cpp is getting large, and I think just adding
more logic will make it harder to reason about, so I'm looking at
splitting it up. This moves out NodeIdTraversal and
DeferredDefinitionWorklist because they're already independent from the
other code, and are reasonably sized to have their own files.
I think there are a few related ways to do this. I considered
llvm::make_scope_exit, but the return type is difficult to work with. I
particularly was thinking I could encapsulate the duration logic this
way.
This PR adds a `--dump-timings` flag to the `compile` subcommand
(similar to the existing `--dump-mem-usage` flag), which collects timing
data per compilation unit for each compilation phase. For example, on my
2020 M1 MacBook:
```
$ bazel build -c opt //toolchain
$ bazel-bin/toolchain/install/run_carbon compile --phase=lower --dump-timings examples/sieve.carbon | tail
...
---
filename: 'examples/sieve.carbon'
nanoseconds:
lex: 30792
parse: 25458
check: 226625
lower: 1136958
Total: 1419833
...
```
Most of the changes are pretty straightforward. There were a couple I
wasn't sure about though; let me know if I should change:
- new `Timings` class in its own file, pretty similar to the existing
`MemUsage` class
- added a `timings_` field to the `CompilationUnit` class
- added a `timings` field to the `Check::Unit` struct
- renamed `CheckParseTree` function to `CheckParseTreeInner` for ease of
timing with early `return`
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Instead, eagerly import only the impls from the api file corresponding
to the current file, if any, because we need those for impl
redeclaration lookup. For all other cases, load only the impls in
libraries that are referenced as part of an impl lookup query.
Building on #4411, avoid using StringLiteral in format strings. This
includes a diagnostic check to prevent regressions (which is also how I
gathered issues).
Note, I haven't looked at `std::string` uses yet, but we might need
things like that to be able to pass strings in code back to the user.
StringLiteral though means that it's literally written down in the
toolchain, at which point it should probably be written in the format
string instead of separately.
---------
Co-authored-by: Geoff Romer <gromer@google.com>
I'm taking the approach of making DiagnosticBase an API so that we can
pass similar diagnostics as parameters. An alternative would be to do
the function_ref approach we've done elsewhere, but these felt more
boilerplate to me.
Note I'm also modifying messages here. Let me know if you'd like
different changes and/or just keeping current formatting (keeping
current formatting would also allow removing some of the templating I've
added, but it felt helpful putting explicit tokens where possible). But
also, things like "`protected` not allowed on `interface` declaration at
file scope" were part of the phrasing issue, I think.
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Add a new `specific_function` instruction that represents a generic
function plus its deduced argument list as a callee in a function call.
The new instruction can only appear as the immediate operand of a call
instruction, so we give it a builtin placeholder type.
At the end of each file, require definitions for all specific functions
used in that file. Resolve the generic with the argument list to produce
those specific function definitions as needed, and diagnose if the
generic doesn't have a definition available.
A few tests are updated in cases where they declared and used generic
functions but didn't previously provide a function definition.
This is a primarily automated change:
- Search & replace for capitalization
-
`(CARBON_DIAGNOSTIC\((?:\n\s+)?\w+,(?:\n\s+)?\s\w+,(?:\n\s+)?\s")([A-Z])`
- `$1\L$2`
- Search & replace for period
-
`(CARBON_DIAGNOSTIC\((?:\n\s+)?\w+,(?:\n\s+)?\s\w+,(?:\n\s+)?\s"(?:[^)]|\n)+)\.("[,)])`
- `$1$2`
- Limited search & replace for `ERROR: ` -> `error: ` in streamed things
- Leaving a TODO for command_line because there's more cleanup that can
be done there
- Modify diagnostic_consumer.cpp
- ERROR -> error
- WARNING -> warning
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
This switches `DCHECK` and `FATAL` as well.
The goal is to reduce the code size impact of these assertions so that
we can keep more of them enabled. Currently, the largest cost I see from
`CHECK` is not the actual check or the cold code itself, but actually
the failure to inline trivial functions due to the presence of the cold
code. This means that our goal isn't to reduce apparent code size in the
final binary but the LLVM IR cost assessed for these routines in the
inliner, which closely correlates with code size but is a bit different.
As discussed in #4283, experimentation shows that a single function call
with a minimal number of arguments is the lowest cost model for these.
This is easily achieved with a format-string API that internally uses
`llvm::formatv`. This PR is essentially the `CHECK` version of #4283.
However, the check macros are substantially harder to make work with
both format strings and streaming because they also take a condition.
Also, unexpectedly, I was very successful at devising a regular
expression based automated rewrite from the streaming to the format
string form with only low 10s of manual fixes. This includes compacting
strings broken up across lines, etc. Given how well that went, I've
prepared this PR which just directly switches to the format string API
and migrate everything to use it.
One nice side-effect is that the format string approach ends up greatly
simplifying the implementation here as well.
This is ... *shockingly* effective. Parsing speeds up by more than 3%
with just this change. And checking speeds up by **8%** with this change
alone:
```
BM_CompileAPIFileDenseDecls<Phase::Parse>/256 86.3µs ± 1% 82.9µs ± 1% -3.94% (p=0.000 n=17+19)
BM_CompileAPIFileDenseDecls<Phase::Parse>/1024 431µs ± 1% 415µs ± 1% -3.76% (p=0.000 n=18+19)
BM_CompileAPIFileDenseDecls<Phase::Parse>/4096 1.77ms ± 1% 1.71ms ± 1% -3.18% (p=0.000 n=18+19)
BM_CompileAPIFileDenseDecls<Phase::Parse>/16384 7.44ms ± 1% 7.17ms ± 2% -3.56% (p=0.000 n=18+20)
BM_CompileAPIFileDenseDecls<Phase::Parse>/65536 30.7ms ± 1% 29.7ms ± 1% -3.15% (p=0.000 n=18+20)
BM_CompileAPIFileDenseDecls<Phase::Parse>/262144 131ms ± 1% 127ms ± 1% -2.81% (p=0.000 n=18+18)
BM_CompileAPIFileDenseDecls<Phase::Check>/256 878µs ± 2% 800µs ± 1% -8.91% (p=0.000 n=19+20)
BM_CompileAPIFileDenseDecls<Phase::Check>/1024 1.88ms ± 2% 1.72ms ± 1% -8.56% (p=0.000 n=19+20)
BM_CompileAPIFileDenseDecls<Phase::Check>/4096 5.78ms ± 2% 5.28ms ± 1% -8.70% (p=0.000 n=20+18)
BM_CompileAPIFileDenseDecls<Phase::Check>/16384 21.9ms ± 1% 20.1ms ± 1% -8.02% (p=0.000 n=18+20)
BM_CompileAPIFileDenseDecls<Phase::Check>/65536 90.4ms ± 2% 83.1ms ± 1% -8.04% (p=0.000 n=19+20)
BM_CompileAPIFileDenseDecls<Phase::Check>/262144 381ms ± 2% 352ms ± 1% -7.79% (p=0.000 n=19+19)
```
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Co-authored-by: josh11b <15258583+josh11b@users.noreply.github.com>
Remove `ReusingLoc` and add enforcement that even for imported
locations, the kind of the parse node for an instruction matches the
kind specified in the instruction definition.
Change the node kind for a few instructions to `NodeId`:
- A couple of instructions had a typed node but could be created
implicitly with any node as part of a builtin implicit conversion. This
happened for `AddrOf`, `ArrayIndex`, and `Deref`.
- A bunch of instructions had `InvalidNodeId` as their associated parse
node kind but were actually always created with a location.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Refactors a bunch of the SemIRDiagnosticConverter to be able to use that
from Lower to access source locations there to use in debug info.
I assume some of this is a bit jank/would need to be fixed/improved in
the future - like the context functor that's passed into ConvertLoc?
(not totally clear what that's for/what the debug info will be missing
out on in its absence, I could throw a FIXME in there if you like)
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Boaz Brickner
Jon Ross-PerkinsandDana Jansens
Richard SmithandJon Ross-Perkins
Thomas Köppe
Sam EstepandJon Ross-Perkins
josh11bandJosh L
David BlaikieandJon Ross-Perkins