This change is to make it clearer what is a TODO versus unexpected behavior. I'm doing this now because I feel it's been getting a little confusing in code.
So for example if I write the code a return type `-> i32`, I get the diagnostic output plus the dump of the (invalid) IR:
```
/carbon-lang/toolchain/semantics/testdata/function/basic.carbon:37:10: Semantics TODO: HandleReturnType
cross_reference_irs_size: 1
callables: [
]
integer_literals: [
]
strings: [
]
nodes: [
{kind: CrossReference, arg0: ir0, arg1: block0, type: node0},
{kind: CrossReference, arg0: ir0, arg1: block1, type: node1},
{kind: CrossReference, arg0: ir0, arg1: block2, type: node0},
{kind: CrossReference, arg0: ir0, arg1: block3, type: node0},
]
node_blocks: [
[
],
]
```
For parameters (and in the future, arguments too; generally comma-separated lists) track two node blocks:
1. param_ir: The complete IR.
2. param_refs: Nodes within the IR that are the "root" parameter.
param_refs should allow quick counting of the # of parameters, and more efficient comparison of call args with function parameters. param_ir should be necessary to generate the actual signature.
In order to construct this, this refactors the node_block_stack into its own class, which is reused in params_stack. These carry references to the underlying SmallVector for lazy modification in order to avoid a dependency cycle with SemanticsIR (also see notes on empty node blocks below).
When finalized, the block pair is pushed onto finished_params_stack. That's because node_stack only has space for one thing, and this is two things -- so I'm essentially choosing a trade-off of adding another stack in order to avoid consuming more space in the expectation that most parse nodes have 0 or 1 things to return, and 2 will be very rare.
As factored, this currently consolidates most empty node blocks into a single canonical empty node block. This is because I think empty blocks, i.e. `()`, will be very common. In order to achieve this, SemanticsNodeBlockStack does lazy creation.
An alternative approach would have been to use 1 node block per parameter. We decided against this in order to reduce the number of vectors being created.
Currently, there's a mix of accessing node_stack_ both directly and indirectly, and there are already several Push/Pop methods to help wrap the behavior. However, there's also direct access because of shifting over time, as well as variations in _how_ the stack is used.
This migrates to a separate class in order to make a more specific contract for the API. It cleans up existing uses and adds APIs where needed.
The problem I'm trying to solve is: `var x: i32 = x;`. This change makes it so that name lookup fails, by removing `x` from name lookup between the `=` and `;`.
`var x: i32` still adds to name lookup to handle future situations like `var (x: i32, x: i32);` which is still a redefinition of `x`; if we don't add `x` to name lookup, it gets harder to catch that example.
The VariableDeclaration/VariableInitializer refactor in ParseTree supports this by given a bracketing-like structure for semantics to cue that it's entering an initialization expression. With this, VariableInitializer can remove the name lookup and queue it to be restored. VariableDeclaration doesn't need to change too much since it's still bracketed by VariableIntroducer, and so we just traverse slightly differently.
Note this also incidentally changes a little about NameReference, that it's returning the storage consistently instead of the name. You can see this e.g. in global_lookup.carbon, `Assign(node8, node4): node2;` using node4 (VarStorage) instead of Node5 (BindName). Really either _could_ work, since from a BindName we can get to the VarStorage, and that may be reason to switch later if we find it preferable to have the BindName for whatever reason.
But the *actual* value in NameLookup is a BindName so that errors can associate with the _name_ instead of the "storage" parse node, which is currently the `:`. This is mainly for fail_duplicate_decl.carbon, which has a "Previous definition" note that points at the storage's parse node.
This switches to single list storage of SemanticsNode. The driving motivation behind this is to simplify cross-references within a given IR. Types of nodes will frequently refer to other blocks. This causes a significant increase in the number of cross-references, which can become difficult to manage (and reason about). By reducing to a single list of nodes, cross-references are only needed when crossing IR boundaries.
Because cross-references now only have 2 things to track (IR and index), they can be a regular SemanticsNode and don't need further indirection. This wasn't motivating, but feels like it reinforces the simplification.
Note this isn't being used to deduplicate nodes, at least right now. That could lead to difficult-to-update situations, but also most nodes are associated with the underlying ParseTree::Node in order to track sources for diagnostics; as a consequence, nodes representing equal text in different source locations wouldn't be the same node. There may be future opportunities here, discussed with @zygoloid, but no action is taken at present.
We may eventually want to switch the storage of NodeBlocks to have `[start, end)` ranges instead of individual numbers, but I'm leaving that alone for now.
As an aside, I noticed I was accidentally overloading the copy constructor on SemanticsIR. I've added some disambiguation on that, but am not deleting the copy constructor per style advice (even though the type should never be copied due to storage size).
codespell tries to change `CrossReference -> cross-reference` so disabling it there.
When binding a name, add it to name lookup. On NameReference nodes, use name lookup.
- Switches from "identifiers" to the more generic "strings". Not strictly necessary here, but it's the overall direction I think we've agreed upon and wanted to do it while building more support out.
- Starts doing deduplication of strings.
- On BindName, registers names with name lookup.
- Does name lookup based on the deduplicated string.
- Per discussion with zygoloid, design is intended to be constant-time lookup regardless of the number of parent scopes.
- Adds scopes so that we can track names which will be deregistered from lookup.
This creates a bit of extra cost in adding parse nodes in that a TODO must be added to semantics, but I think the link is going to last this way long-term. In semantics, it reduces the boilerplate of the main for loop and makes it more obvious what's missing, leaving stub functions to be filled in.
This is just the declaration, without initialization. Partly breaking it out because I'm changing the placeholder builtin types.
Might also need to separate out storage of the var from the name bind.
LLVM's bazel build has changed a bit, so this updates the tree for that.
LLVM is also moving `llvm::Optional` to match the standard API, but it seemed simpler to just switch to `std::optional`.
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
This is a first pass at what semantic type checking might look like. Types propagate along nodes, we use an InvalidType object when there's an error, and once there's an InvalidType we stop doing so much type checking.
This adds some RealLiteral handling in order to get type mismatches. I'm cautious about creating some real value for SemanticsIR (since the tokenized buffer version is a bit constrained), so I'm not doing that yet. But I will probably need to in order to maintain SemanticsIR having hermetic copies of its data, without a parse tree dependency.
This starts adding builtins with TypeType and IntegerLiteralType. Note, structurally that's all they are, and not directly accessible in any way.
Adds a type field to SemanticsNode. Now, IntegerLiteralType can be identified as having type=TypeType, and IntegerLiteral as type=IntegerLiteralType. The current iteration doesn't do anything for type propagation, because I wanted to avoid making this too big.
This also switches the Identifier IR to instead BindName, with some side-effects. I'd been trying to think how to provide a name for TypeType, and switching around how things worked seemed like a better approach. And while I think it's the right direction (e.g., alias should just be a BindName), I also realized I don't need to name TypeType: there's probably a keyword to refer to the builtin, so it shouldn't use regular name lookup.
As a step towards builtins, provide more blocks. The intent is that any significant scope change will become its own NodeBlock. Builtins should produce the first set of node blocks.
Note, SemanticsIR as set up here isn't handling ordering of import processing -- I haven't thought that through much beyond that we probably want some lighter-weight processing of the parse tree to achieve it. But I think the essence of loading builtins first as their own IR block is... probably right?
I'm thinking about how to handle multiple files, and I think the current IRFactory is useful as a file-focused thing. So shifting/renaming accordingly. (doing this in its own PR to make the history a little cleaner for git's move detection)
Jon Ross-Perkins
Chandler CarruthandJon Ross-Perkins