This introduces `calling_convention_param_ids`, a single block that
consolidates all the information that was being used by consumers of
`param_refs` and `implicit_param_refs`, in a form that's easier to
produce and typically easier to consume.
See also [this Discord
discussion](https://discord.com/channels/655572317891461132/655578254970716160/1300545448909738125)
regarding the decision to keep the return slot last in the SemIR calling
convention, even though it goes first in the LLVM calling convention.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
The new `FacetValue` instruction represents `C as I` for some type `C`
and facet type `I`. It is named `FacetValue` instead of just `Facet` to
parallel the `FacetType` instruction.
This PR uses this instruction represent the facet value `Self` in an
`impl` declaration. This instruction will be used in the future to also
support things like:
* `C as I` where `C` is a class; and
* forming a specific for a generic with a `T:! I` parameter where `T` is
being given a concrete value.
(Here `I` is an interface or other non-`type` facet type.)
Also do some renaming and add some comments to make things a bit more
clear.
* `FacetTypeAccess` -> `FacetAccessType` to clarify this is not access
of a facet type, but access of the type of a facet
* `.facet_id` -> `.facet_value_inst_id` to parallel the `FacetValue`
instruction
`FacetAccessWitness` will be in a future PR.
---------
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
For the few remaining uses of the builtin `i32` type, manually build an
`IntType(Signed, 32)` value instead. These are:
- The return type of `Run`.
- The type that int literals in an `if` expression are converted into.
- The type of an array index expression.
We should consider converting those three cases away from `i32` over
time.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Stop rejecting `extend adapt` of non-class types such as struct and
tuple. These don't actually work just yet because name lookup into
struct and tuple types is a special case that doesn't handle adapters,
but this gets us a bit closer.
This also slightly improves error recovery for name lookup into an
invalid scope.
When an `IntLiteral` appears as an operand of an `if` expression,
convert it to `i32` for now, so that we don't reject things like `if
cond then 1 else 2` due to having a non-constant value of type
`IntLiteral`.
For tuple indexing expressions such as `(a, b).0`, convert the index to
type `IntLiteral`, not to type `i32`. This isn't strictly necessary to
do in this PR, but avoids the need to provide an `IntLiteral` -> `i32`
implicit conversion for `no_prelude` tests using this syntax.
- Do not include entities imported from files that we are not dumping.
- Do not include constants and import_refs that are not referenced by
something that we are including in the formatted output.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Co-authored-by: Carbon Infra Bot <carbon-external-infra@google.com>
This can lead to us trying and failing to print certain kinds of
constant value, but we can fix that in future changes.
Note that `StringifyType` should probably be substantially refactored.
For this change I'm trying to leave the overall structure relatively
intact, but hopefully this additional formatting support will help guide
future refactorings.
This does a few things:
* Replaces the single `TypeId` in the `FacetTypeInfo` struct with a
vector of `InterfaceId`, `SpecificId` pairs (sorted in id order)
representing the set of interface requirements of the facet type. This
will later be used to support facet types with multiple interface
requirements (as in `I & J` or `I where .Self impls J`).
* Replace `InterfaceType` instructions (used as the type of an
`InterfaceDecl` instruction) with `FacetType` instructions (introduced
in #4460) with a (newly introduced) `FacetTypeFromInterface()` function.
* Replace code that consumed `InterfaceType` values with code that
consumed `FaceType` values. I've generally left the assumption in the
code that it is dealing with a single interface, using the (newly
introduced) `FacetTypeInfo::TryAsSingleInterface`, and producing an
error otherwise. There isn't yet support for the `&` operator or `where
.Self impls`, so this is generally a good assumption for now, except you
can get a facet type with no associated interfaces from a `type
where`... expression. In some cases, the facet type value is pulled from
the evaluation of an `InterfaceDecl` instruction, where the single
interface assumption will hold permanently.
* Some related cleans up: nicer stringification and formatting of facet
types, suppression of some errors when there already was an error.
There is still a lot left to do, including:
* Type `type` should be a facet type with a reserved id, replacing the
built-in instruction.
* Code using `TryAsSingleInterface` should generally be upgraded to
handle more than (or less than) one interface. Name lookup should be
particularly exciting.
* Operator `&` should be defined on facet types, unioning their
interface and other requirements.
* Requirements from a `where` clause don't do anything yet.
* Impls and impl lookup need to resolve facet types, and do things like
determine if all the associated constants are given values.
---------
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
Co-authored-by: Geoff Romer <gromer@google.com>
This is primarily to free up space in the BindingPattern insts, but as a
side effect it moves the link between BindingPattern and its BindName
out of the SemIR, and into a transient data structure in Context.
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
When an instruction is created as part of an implicit call to an
interface member, we generated a bunch of constants for naming the
interface, finding the corresponding specific, accessing its member
function, and so on. This led to significant bloat in SemIR.
Instead, we now track whether an instruction is created implicitly in
its location, and where relevant, we use the constant value of the
instruction directly instead of storing a new `Inst`.
This doesn't reduce the amount of work we need to do, but does make the
representation in SemIR smaller and more readable.
This instruction represents integer values, whether they come from
literals or calculations, so it the old name is inaccurate. I also plan
to rename `BigInt` to `IntLiteral` based on recent discussion and this
change aims to avoid confusion stemming from the same name being used
for two different things.
I'm not renaming `FloatLiteral` because recent discussion suggests we
may want distinct `FloatLiteral` versus `FloatValue` representations in
SemIR.
This is in particular to avoid churn from changes such as #4370. I think
the import list can be helpful (particularly to understand what the
library is aware of), but it's a different trade-off for the prelude
package due to the implicit imports.
This PR makes it so that types can implement the `IndexWith` interface
so that they can provide their custom indexing behavior.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Also surround it in square brackets rather than parentheses. This
matches the format used by Clang and GCC, and means diagnostics will
still match the `file:line:col: error: ` pattern used by some IDE tools.
Before:
```console
fail_builtins.carbon:11:11: error(AliasRequiresNameRef): alias initializer must be a name reference
```
After:
```console
fail_builtins.carbon:11:11: error: alias initializer must be a name reference [AliasRequiresNameRef]
```
Also tighten up test regex to only match on `STDERR` lines that list a
file name.
- Generate runtime indices as part of pattern matching, rather than as a
separate postprocessing/rewriting step.
- In contexts where runtime parameters aren't permitted, avoid emitting
insts for them to begin with, rather than trying to detect the problem
and rewrite the IR to remove them later on.
This is to help identify which diagnostics we're actually using.
Note that driver/testdata still has tests which don't pass this flag,
and so continue to test the kind-less (default) behavior.
Also propagate the pattern IR along with the pattern-match IR, and use
it where appropriate.
Strictly speaking, some parts of the pattern-match IR are allocated
eagerly, while traversing the pattern's parse tree, but they still
aren't actually emitted until we traverse the associated pattern insts.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Introduces the `BindingPattern` and `SymbolicBindingPattern` insts, and
a separate stack of pattern blocks that they are emitted into. The
intent is to generate the corresponding pattern-matching insts (like
`BindName`) from them in a separate pass, but that is deferred to future
PRs.
See
[here](https://docs.google.com/document/d/1U_vQH17V893J9aF1LJXUnFYBNSs2MjKl4bJPaWCB2zo/edit?usp=sharing&resourcekey=0-w0xGYZ0An31Kpz-wvzSXwQ)
for the design this is based on, but note that during review we have
chosen to deviate from that design by putting the patterns in separate
blocks, and omitting the "forward references" from a `BindingPattern` to
its corresponding `BindName`. This in turn necessitates having separate
inst kinds for symbolic and non-symbolic binding patterns.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Omit the `note: ` prefix and the snippet from the "in import" note that
precedes a diagnostic.
This makes our diagnostic output more closely match that of Clang and
GCC.
This is a primarily automated change:
- Search & replace for capitalization
-
`(CARBON_DIAGNOSTIC\((?:\n\s+)?\w+,(?:\n\s+)?\s\w+,(?:\n\s+)?\s")([A-Z])`
- `$1\L$2`
- Search & replace for period
-
`(CARBON_DIAGNOSTIC\((?:\n\s+)?\w+,(?:\n\s+)?\s\w+,(?:\n\s+)?\s"(?:[^)]|\n)+)\.("[,)])`
- `$1$2`
- Limited search & replace for `ERROR: ` -> `error: ` in streamed things
- Leaving a TODO for command_line because there's more cleanup that can
be done there
- Modify diagnostic_consumer.cpp
- ERROR -> error
- WARNING -> warning
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Add support for initializing types like `GenericClass(i32)` from a
struct literal. A new kind of instruction, `complete_type_witness`, is
added to the class definition to track the object representation type so
that it's visible to the generics machinery. Accesses to the object
representation of a class have all been updated to pass in the class's
`SpecificId` so that the types of the fields of the specific class are
used instead of the types of the fields of the generic class in places
that look at the object representation -- primarily class
initialization.
Instead of the `call` instruction having a block with one argument per
explicit argument, preceded optionally by `self` and followed optionally
by a return slot, change the `call` to store only the *runtime*
arguments. Store an index on the runtime parameters to make it easier to
determine the correspondence between arguments and parameters in a call.
Compile-time parameters, whether implicit or explicit, are no longer
included in the call argument list. Instead, they're tracked only in the
`specific_id` on the callee.
For calls to generic classes and generic interfaces, it no longer makes
sense to form a `call` instruction, given that the entirety of the
result is determined by the `specific_id`, which is now formed when
checking the call. Instead, the `call` instruction now only models
function calls, and not calls to other kinds of parameterized entity
names, and we create a `class_type` or `interface_type` instead of a
`call` instruction to model these kinds of calls. Notionally the model
here is that we're following the #3720 approach for calls, but for now
we inline the `Call.Op` function when forming SemIR.
We now also track the enclosing specific for a generic class or generic
interface that appears within an enclosing generic. This is necessary in
order for deduction of the inner generic parameters to not get confused
by the outer generic parameters being absent.
In order to not regress diagnostics, the template argument deduction
mechanism has been extended to specify the name of the parameter we're
deducing against when possible, and call arity mismatch errors are now
diagnosed before performing deduction rather than afterwards.
Add these interfaces to the core library. For now, they're two separate
interfaces because we don't yet support one interface extending another.
This collapses a lot of the layering in check: for example, the call
building logic depends on implicit conversions, conversions now depend
on the overloaded operator machinery, and that machinery depends on
building calls.
In passing, improve the diagnostics for failing to find a name required
from the prelude. Also convert all the transitively-called code from
`NodeId` to `LocId` given the latter is what the conversion machinery
has available.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
This implements a few closely related features:
- Starts merging namespaces discovered inside imports.
- Stores results of cross-package name lookup as an entry inside the
scope.
- Note this is particularly visible with `i32`.
- Moves more of the imported instructions to the import scope.
Note this is primarily for executing the namespace TODO in check.cpp,
which is removed here.
`testdata/namespace/merging_with_indirections.carbon` tests key
behavior.
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Also adds import_ir_scope to namespace formatting. I'd done this as an
aid for #4153, and am splitting it out.
---------
Co-authored-by: Geoff Romer <gromer@google.com>
This executes on a TODO in AddImportRef to add instructions to their own
block instead of the File block. This has an important consequence of
removing a pattern from InstBlockStack that added to blocks not
currently at the top, cleaning up an issue for ArrayStack. The delta
here is then mostly in different formatting of the import refs, a
consequence of the separation.
By adding an `ImportDecl` instruction, this creates something that can
be referenced through `ImportIRInst`.
packages/no_prelude/implicit_imports_entities.carbon is getting a test
of this (import_conflict and import_conflict_reverse).
Also re-packs ImportIR from 24 bytes to 16 on 64-bit, since I'm touching
everywhere that makes one anyways.
Merges handle_let.cpp and handle_variable.cpp into a single file in
order to take better advantage of commonalities.
Both still have a bunch of kludges, and there's still divergent handling
in handle_binding_pattern that will yield different results. However,
this fixes some things about `let` like starting to make use of
global_init (imperfectly, due to how VarStorage works, I grant), and in
particular adding `let` names to a name scope, not just lexical lookup.
Don't use the pretty-printed type name, because that's intended for
diagnostics, not for a theoretically machine-readable format like SemIR.
Types are always constants, so omit the leading `constant.` on the type
instruction name.
Don't format the *type of* the function `F` as `"F"`. Instead use
`"<type of F>"`.
Also improve instruction naming for function and generic class name
values: name the value after the function or generic class, and add a
`.type` suffix to the type.
This has is a nice-to-have for me. Frequently I want to run a specific
test, and end up digging through output to be able to copy-paste the run
line. This uses TIP lines to inject the command into the file when using
AUTOUPDATE.
Note, one of the reasons I want this is because "bazel test
//toolchain/testing:file_test --test_output=all" has been regularly
exceeding bazel's output limit for me (workaround is either opening the
output file or specifying an obscure output limit flag), making it a
little harder for me to get the commands. However, frequently I'm adding
a file and want to iterate on it, so that's really the use case I have
in mind here.
Modifies the core package and literal handling to use factory functions
for standard type literals.
Updates function/builtin/import.carbon to stop depending on the prelude,
since it would list all the impls in the core file. Updates
alias/builtins.carbon to be failing (the type values cannot be aliased).
Change syntax for package declaration to put the `impl` keyword at the
start and remove the `api` keyword.
To support this, rearrange processing of package, library, and import
declarations to use the general modifier handling support in declaration
parsing rather than special-case logic.
There is an ambiguity in `impl package.Foo as Bar`, which we resolve by
treating `package` as an introducer after a modifier only if it's not
followed by `.`.
This was to track use of a declaration after import, prior to a
redeclaration. Per [discussion on
Discord](https://discord.com/channels/655572317891461132/1217182321933815820/1236016521059237962),
we likely don't need this check due to the change in behavior of
`extern`.
Rather than potentially getting one of many `extern` decls and depending
on it by accident, it is now planned to be _required_ to be imported,
and the library doing a non-`extern` decl must _know_ it's importing the
`extern` decl. The stricter requirement on the library means it now
seems more reasonable to use the `extern` decl.
So kind of rolling back #3831, though keeping `ImportIRInstId` (at least
for now) and keeping `Loaded`/`Unloaded` terminology (seems a nicer
fit).
This removes the builtin FunctionType, replacing it with a FunctionType
instruction. The constant for a FunctionDecl is now a StructValue with
type of FunctionType.
Note this means a function declaration produces _both_ a type, and a
value of the type. This has some consequences in terms of circularity,
and makes the importing of function declarations a little more complex.
It'll get particularly peculiar for imports because of the behavior of
the reference, but that's a known issue due to other things such as
`alias`. The impact will hopefully be contained to
ResolvePrevInstForMerge (and ImportRefs).
To note a small formatting change in diagnostics:
```
- // CHECK:STDERR: fail_member_lookup.carbon:[[@LINE+4]]:3: ERROR: Value of type `<associated <function> in Interface>` is not callable.
+ // CHECK:STDERR: fail_member_lookup.carbon:[[@LINE+4]]:3: ERROR: Value of type `<associated F in Interface>` is not callable.
- // CHECK:STDERR: fail_todo_facet_lookup.carbon:[[@LINE+4]]:3: ERROR: Value of type `<associated <function> in Interface>` is not callable.
+ // CHECK:STDERR: fail_todo_facet_lookup.carbon:[[@LINE+4]]:3: ERROR: Value of type `<associated F in Interface>` is not callable.
```
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Change the names for emitted globals for constants with storage to
include both the name of the constant and the name of the use.
This causes the instructions to also be named in SemIR and in LLVM IR
constants.
We don't need it any more, and removing it simplifies a few things:
- One fewer predefined `File` and reserved ID.
- We now have simply `Builtin` instructions for builtins, instead of
having an `ImportRef` that indirectly references a `Builtin`.
- `ConstantId`s now always refer directly to a local constant, instead
of sometimes referring to an `ImportRef` for a constant in the builtins
IR.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Adds support for unary `-` and binary `+`, `-`, `*`, `/` for floating
point types.
Real literals are now transformed to `llvm::APFloat`s during the check
phase into the `FloatLiteral` instruction.
This PR likely collides a bit with #3892 and might need to be updated
when that one is merged.
Factor out `SemIR::InstNamer` and also use it when lowering to LLVM IR.
Automatically name all instructions created with our `IRBuilder` based
on the name computed by the `InstNamer`, and likewise name basic blocks
using the label generated by the `InstNamer`.
Move some of the existing naming logic out from lower into `InstNamer`
so that it's also used in SemIR. In particular, we now name call
instructions after their callee, or after the builtin name for calls to
builtins.
Computing and adding these names isn't completely free. This instruction
naming is designed to be optional, so that we can turn it off for builds
where the LLVM IR will only be converted to assembly and won't be seen
by a human, but so far it's enabled unconditionally. We can tune that
later as needed.
Use the complete location of the `as` conversion rather than the
location of the first operand, so diagnostics referring to the result
point at the whole thing.
Move completeness check to the point where the function is defined or
first called. This means we also defer deciding whether the function has
a return slot until that point. Instead of storing a return slot per
function, store the location of the return storage, which may or may not
be used, and compute and store a separate flag saying whether to use it
at the point of first use or definition.
This is the final piece in supporting simple `Make` functions in classes
as a replacement for constructors.
Geoff RomerandJon Ross-Perkins
Brymer MenesesandJon Ross-Perkins
Pablo Paglilla