The `full.carbon` prelude just sets a flag indicating an explicit intent
to include the full prelude. Once all tests include some prelude file,
an error can be enabled (currently it's commented out) that requires an
`INCLUDE-FILE` of some min-prelude to be present in all `check/` and
`lower/` file tests.
Factor out the logic for mapping from a `LocId` into a diagnostic
location from check into sem_ir so it can be reused by lowering. Include
the function and instruction being lowered in the pretty stack trace.
Example stack trace:
```carbon
2. filename: examples/sieve.carbon
3. core/prelude/types/int.carbon:213:3: lowering function Core.Op(Core.IntLiteral as Core.ImplicitAs(i32))
fn Op[addr self: Self*](other: Self) = "int.sadd_assign";
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
4. core/prelude/operators/arithmetic.carbon:22:27: lowering call
fn Op[addr self: Self*](other: Other);
^~~~~~~~~~~~
```
As we've been discussing stack trace behavior, I was thinking having the
version in crashes would be helpful. e.g.:
```
1. Carbon version: 0.0.0-0.dev+bdcef04bb.dirty
```
To make it easier to identify crashing files when testing multiple.
```
(elided)
3. Check::Context
filename: duplicate_name_same_line.carbon
NodeStack:
(elided)
```
I've been mulling the name of this, changing it and updating comments to
try and better reflect the current semantic. "Imports" reflects how
we're currently printing this in SemIR.
Adds minimal defaults for codegen so that those tests don't need to
specify the full command line.
Moves driver/testdata/compile to check/testdata/basics/raw_sem_ir, which
seems like it better reflects the focus. Removes the textual IR test
because we have plenty of those now.
Moves a multiline token diagnostic test to parse because (a) diagnostics
doesn't have other tests and (b) this is really testing the way that
parse structures the location.
Drops `--include-diagnostic-kind` from some driver tests that aren't
testing a diagnostic, so the flag felt a bit like noise (even before
this change, there are a few tests that don't specify it because they're
not intended to test an emitted diagnostic, just high-level diagnostic
behaviors).
Adds some comments to reflect my understanding of why a test exists,
when I was pausing to think about it.
Modifies the stdin test to do more dumps; which happens to expose we
currently misbehave.
In preparation for lowering information from multiple `SemIR::File`s
into a single `llvm::Module`. The primary purpose of this is to support
lowering a local specific for an imported generic function, where the
instructions for the generic function are in a different file than the
instructions for the specific. See #5475 for a draft PR implementing
that functionality on top of this.
The per-`llvm::Module` state now lives in `Lower::Context`, and
`Lower::FileContext` tracks only the per-`SemIR::File` information.
`Lower::Context` should not mention any `SemIR` IDs that are
file-specific. For now, the C++ lowering and the specific coalescing
logic are kept per-file for simplicity.
This requires:
* Making `FunctionDecl` mutable since generating code
(`HandleTopLevelDecl()`) requires a mutable declaration and since we
manually add `used` attribute to force code generation.
* Passing the file system to `Lower` since it's needed by Clang code
generation.
* Creating an internal Clang LLVM module and link it against the Carbon
LLVM module.
Demo:
```c++
// hello_world.h
extern int puts;
inline void hello_world() {
((int (*)(const char*))&puts)("hello world");
}
```
```carbon
// main.carbon
library "Main";
import Cpp library "hello_world.h";
fn Run() -> i32 {
Cpp.hello_world();
return 0;
}
```
```shell
$ bazel-bin/toolchain/carbon compile main.carbon
$ bazel-bin/toolchain/carbon link main.o --output=demo
$ ./demo
hello world
```
Based on https://github.com/carbon-language/carbon-lang/pull/5406.
Part of #5405.
Right now, a lot of tests have started setting `--no-dump-sem-ir`. My
thought is that we can look at:
1. Put ranges in a bunch more files.
2. Shift more towards `--dump-sem-ir-ranges=only` instead of
`--no-dump-sem-ir`, because it allows mixing fail-tests with no IR
alongside tests that contain IR.
3. Evaluate switching the default to `--dump-sem-ir-ranges=only`, and
instead set `--dump-sem-ir-ranges=if-present` only in files that want to
typically show all IR (particularly import-related tests, where ranges
don't work well).
In real-world use, my thought is also that it'd be helpful to be able to
add the dump range comments to files, see the output (i.e., the default
behavior of `if-present`) but then also be able to pass `ignore` in
order to see the full IR without modifying the file (possibly also
useful in tests). That model is why I went for tri-state handling.
Note `only` can also have an interesting side-effect. Because core files
(including min_prelude versions) typically won't have ranges, they'd be
implicitly excluded.
- Updates incompatible flags.
- `rules_flex` is no longer used, so enable its flag.
- Fixes `sh_test` deps for
`--incompatible_disable_autoloads_in_main_repo`
- Broadens the exception for `rules_cc` and `bazel_tools` due to changes
to runfiles deps; trying to avoid minutiae that shouldn't affect the
decision.
Instead of crashing when run outside of `bazel`, make the toolchain's
`file_test` binary work properly when no test-specific environment
variables are set. This makes it a lot easier to run `file_test` under a
debugger.
There are two main changes here:
- Don't crash if `$TEST_TMPDIR` is unset. Instead, fall back to LLVM's
temporary directory (typically `$TMPDIR`). We already did this in some
places in tests. We now do it in more places.
- Don't fall back to a target label of `<target>` in the reproduction
commands if `$TEST_TARGET` is unset, because this causes all the tests
to fail because their output doesn't match the expected output due to a
differing bazel run command. Instead explicitly specify the target from
the `FileTestBase`-derived class.
Infrastructure for this has been added generally, but only rolled out to
the toolchain `file_test` binary for now.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Right now we construct `tree_and_subtrees_getters` a couple different
ways, it's just not obvious because one's abstracted in `check`. But
also, when formatting IR, we'll repeatedly do the `IncludeInDumps`
string check, which felt odd to me since it only needs to be calculated
once per IR.
This also shifts `CheckIRId` selection a little earlier, and in doing so
makes `CheckParseTrees` accept a sparse `units` argument. I actually
think this is a positive: it makes `CheckIRId` a little more stable
across possible command lines, when file loading fails (which is the
only time that a file will have a `CompilationUnit` but not a
`Check::Unit`).
Trying to build on the shared issue between these, I'm adding a
`MultiUnitCache` to store the calculated arrays. For the subtree
getters, this is very minor and avoids at most one incremental array
construction (moving logic out of `CompileSubcommand::Run` might be the
bigger benefit). For `include_in_dumps`, when dumping SemIR, this is
changing a calculation run once per entity (in each IR) to be calculated
once per IR (globally), i.e. O(M*N) -> O(N).
Note this seems to be marginal for performance of file_test:
- Before: Stats over 10 runs: max = 5.3s, min = 4.7s, avg = 4.9s, dev =
0.2s
- After: Stats over 10 runs: max = 4.9s, min = 4.7s, avg = 4.8s, dev =
0.1s
I was mainly thinking about this in the context of dumping SemIR ranges.
There, the impact may actually decrease because a range won't do any
cross-IR printing. But, I'm expecting to add another layer for whether
we're printing IR for a file, and that made the `should_format_entity`
callback stick out for me.
Instead of building an eval block as a separate pass at the end of a
generic, build the eval block incrementally.
The larger change here is that asking for the type or constant value of
an instruction now always returns an unattached type or constant value,
in order to preserve the behavior that we previously achieved by doing
the rewrite to attached types and constant values at the end of handling
the generic.
This also incidentally fixes some subtle issues where attached types and
constant values would leak out into check and cause it to get confused
about differences between attached and unattached values. Check should
no longer see attached values except where it explicitly asks for them.
---------
Co-authored-by: Dana Jansens <danakj@orodu.net>
Don't import `ImplWitnessTable` into the `constants` block, because we
generally don't put `Unique` constants there. This matches the handling
of the other kinds of `Unique` constants. In order to keep the
instruction visible in formatted SemIR, add it to the `imports` block
instead.
Also fix a bug in the instruction formatter that resulted in
instructions in the `imports` block being omitted from the output if
they were only referenced by earlier instructions in the `imports` block
and by instructions in the `constants` block. This was already resulting
in some referenced instructions being omitted from the output, but also
occurred frequently for `impl_witness_table` instructions after this
change because it is common for the only reference to those instructions
to be from `impl_witness` instructions in the `constants` block.
This prints instructions that are inside the range, and entities that
overlap with the range. Note this can lead to incomplete printing of
entity contents.
Trying to make it easier to see the API at a glance. The class has
become really long, and this doesn't fundamentally change that, but
hopefully makes it easier to navigate. The entry structure also had some
cruft that I'm removing.
I'm trying to keep functions in the same order as they currently are.
The delta still looks unhappy because of the churn, but hopefully this
at least explains the ordering in formatter.h. You can try using the
"Add indent" commit on the PR to see a better before-after delta.
---------
Co-authored-by: Dana Jansens <danakj@orodu.net>
This was originally needed to support constant evaluation of name
expressions, but that's now done in a different way.
This is actually a step toward treating all patterns as constants. The
upcoming change will do so in a slightly different way, and so it will
simplify the review to start from a baseline where patterns are never
constant.
Adds an empty `min_prelude/destroy.carbon` in anticipation of turning it
into an interface. Update `no_prelude` tests to be `min_prelude` and
import it where needed; in some cases, modify the file to remove the
dependency (i.e., rewrite code to have nothing to destruct).
Rules executed by bazel don't necessarily have the right environment to
find the symbolizer, which was the intent of `cc_env` setting
`LLVM_SYMBOLIZER_PATH`. So far, this has kind of been a case-by-case
fix, but every so often I'm trying to debug a crash in a test that
doesn't provide it. Rather continuing down this route, instead add
drop-in wrappers for cc rules so that it's hard to forget.
Note `bazel/cc_rules` is intended to mirror `bazel/carbon_rules` and
`bazel/cc_toolchains`, rather than `@rules_cc`.
AFAICT there isn't a great way to add this as a default for the `bazel
run` environment. It's not typically going to be set on its own,
forwarding `$PATH` would be too broad, and the [action
`env_sets`](https://bazel.build/docs/cc-toolchain-config-reference#using-action-config)
I think are not quite what we need (I think those don't include output
execution, only compilation).
The main goal of this is to collapse the LocId and SemIRLoc types into a
single type, eliminating the need for APIs to decide which to use. This
originated from discussion about UnwrapSemIRLoc in #5169. Although that
was removed in #5202, it's probably still a good direction for LocId.
This changes the packing of LocId to allow adding InstId, making it
tri-modal: ImportIRInstId, InstId, or NodeId. This has a side-effect of
reducing the available space for ImportIRInstId, although not by much
due to the pre-existing `ImplicitBit` behavior. If needed, we could also
probably play with packing a bit more since `ImplicitBit` really only
applies to `NodeId`, but I was trying to keep the logic a little
simpler. Note `TokenOnlyBit` can still apply to `ImportIRInstId`.
This leaves in place a typedef for SemIRLoc -- I intend to clean that up
separately.
Some Discord discussion is
[here](https://discord.com/channels/655572317891461132/655578254970716160/1353755830058745959).
TypeInstId is an InstId whose constant value has a type of TypeType.
This includes:
- Type value instructions, the `ClassType` or `IntLiteralType`
instructions.
- Constraint value instructions, which are the `FacetType` and
`TypeType` instructions, each of which also have type TypeType.
TypeInstId encodes in the type system that it is safe to convert the
instruction's value to a TypeId, and CHECKs at construction that this
invariant is maintained.
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
In preparation for shifting from `TypeId`s potentially representing
attached types to always representing unattached types, using
[terminology suggested on
Discord](https://discord.com/channels/655572317891461132/963846118964350976/1359286326779973712).
This change causes us to track slightly more type spelling information
through SemIR.
One change that has significant impact on the SemIR output is that we
now build a `struct_type` instruction in each class representing the
types of the fields, including the spelling used for those types. This
is now no longer always identical to the corresponding canonical
`struct_type` for the object representation, so it's built separately
and owned by the class.
Also remove `TypeBlock` support entirely, as its only use was
representing `TupleType`s, which now use an `InstBlock`.
Instead of using None, use an explicit ImplWitnessTablePlaceholder in
the witness table for entries that have not yet been populated, to aid
debugging. This would ensure they would show up very clearly in the
SemIR. This uncovered some `<invalid>` in the SemIR under erroneous
conditions that have now been turned into `<error>`.
Add the ImplWitnessAssociatedConstant instruction which wraps the
canonical instruction found from the constant value of the rewrite
constraint. This ensures that we have an instruction inside the eval
block for a generic impl declaration for each rewrite constraint's
value, which allows Subst to be performed to rewrite the symbolic
constant of the ImplWitnessAssociatedConstant instruction to associate
it with the generic. This will prevent the otherwise orphaned symbolic
constant of the rewrite's value from being used which can not have a
specific applied to them.
While applying the new insts in InitialFacetTypeImplWitness(), rearrange
the function to use less nesting. And avoid using entity names from
imported instructions (as we found is not effective in deduce.cpp) and
use a local instruction by going through the constant value.
This PR is part of the effort to allow a rewrite to name a generic
parameter, such as `impl forall [T:! type] T as Z where .X = T`, however
tests for this involve a final impl so that we can typecheck that the .X
value is a specific T, so the tests will come with that work. This piece
is split off because introducing new instructions causes a lot of SemIR
churn, and I wanted to get that done separately.
Each of these types takes another type as an operand. Instead of storing
that other type as a `TypeId`, store it as an `InstId` so that we can
track how it was written, not only its canonical form.
The canonical constant values of these types continue to store the
canonical constant values of their operands, as normal.
---------
Co-authored-by: Dana Jansens <danakj@orodu.net>
Factor out logic to evaluate `EntityNameId` instead of duplicating it
between `BindSymbolicName` and `SymbolicBindingPattern`. Remove support
in `SymbolicBindingPattern` for evaluating a pattern to the constant
value of the corresponding binding, which doesn't really make any sense
given that patterns don't generally evaluate to the value that they
matched.
This results in the handling for `SymbolicBindingPattern` being simply
the default handling for an always-constant instruction, so remove the
special case for it entirely and change its constant kind to `Always`.
It's not entirely clear that it makes sense for `SymbolicBindingPattern`
to be treated as a constant when other patterns aren't, but we seem to
be relying on this in various places, so leave it as a constant for now.
Changing it to never be constant will be a smaller change now -- it just
requires changing the `constant_kind`.
The IR changes in the tests are fairly widespread, but mechanical, and
there are two kinds of things changing:
- `symbolic_binding_pattern`s in specifics now evaluate to
`symbolic_binding_pattern`s, not to the argument values. This means in a
few cases we end up with additional `symbolic_binding_pattern`
constants.
- We evaluate the type operand of `symbolic_binding_pattern` now, so an
error in the type will now properly be propagated into an error in the
pattern's constant value.
I was thinking about this after `seq` changes in #5182, and looked for
other uses that might be replaceable. Here's the resulting cleanup
around `seq`:
- Switch to `enumerate` or `zip` when possible.
- `int _` -> `auto _` (it's typically a `size_t`, but there's no reason
to cast when unused)
- Fix a case of cast style `(size_t)...` -> `static_cast<size_t>(...)`
- Switch `(void)close_children_count` to `[[maybe_unused]]`
What this really does is avoids shadowing names, so that we can
comfortable have things like `Check::DiagnosticEmitter` or
`Check::DiagnosticLoc` without shadowing being a concern.
Note, down this path I'm also thinking about:
- Renaming misc DiagnosticConsumer/DiagnosticEmitter classes, possibly
just to DiagnosticConsumer/DiagnosticEmitter (so
`Check::DiagnosticEmitter` instead of `SemIRLocDiagnosticEmitter`).
- Dropping `Diagnostic` from `Emitter::DiagnosticBuilder`.
- But not for `Check::DiagnosticBuilder`, because `Check::Builder` would
be ambiguous.
- Renaming diagnostics/diagnostic_* to drop "diagnostic".
[Discussion about SemIRLoc ->
DiagnosticLoc](https://discord.com/channels/655572317891461132/655578254970716160/1353771570463768698)
reminded me of this (in particular the older [Check::DiagnosticBuilder
discussion](https://discord.com/channels/655572317891461132/655578254970716160/1344363562608627763)),
but I'd only do that rename if there's matching consensus about a path
forward where we keep SemIRLoc, and in a way that it's only ever used
for diagnostics (the divergence from which is at the root of current
LocId discussion).
I'm trying to keep that separate from a namespace addition for clarity.
Move call_params_id from EntityBaseWithParams to FunctionFields.
No visible difference for Function. Since field call_params_id is
function specific fits better in FunctionFields.
The INCLUDE-FILE option is only used in the toolchain tests for now. If
specified in a file test, the given file path is added to the test's
arguments. For toolchain tests this makes the file's package available
to the test. The `--custom-core` command line flag is added to the
driver, which avoids adding the production `Core` package to the command
line. Together, these allow a test to provide their own minimal `Core`
package.
For example, this would replace `Core` with the package and prelude in
`facet_types.carbon`.
```
// INCLUDE-FILE: toolchain/testing/min_prelude/facet_types.carbon
// EXTRA-ARGS: --custom-core
```
To support this:
* //testing knows how to parse INCLUDE-FILE out of the header of a test
file.
* //testing adds the file to the virtual file system, and includes it in
the test's arguments.
* //toolchain/driver grows the --custom-core command line flag to avoid
loading the production `Core` package.
Tests that were creating their own minimal prelude to define BitAnd on
types are now pointed to
toolchain/testing/min_prelude/facet_types.carbon as the prelude. They no
longer need to `import Core` in each test as a result.
Such tests are no longer `no_prelude`, but instead have their own
prelude. So they are moved to a `min_prelude` subdirectory.
Closes#5076
- Explicitly document that `*Param` and `*ParamPattern` insts represent
`Call` parameters.
- Stop wrapping compile-time parameter patterns in `ValueParamPattern`
insts (because they aren't `Call` parameters).
- Document how `MatchContext::results_` relates to the `Call`
parameters, and be more consistent about when it's written to.
- Remove `RuntimeParamIndex::Unknown`: we no longer need to distinguish
"this `Param`'s runtime index is unknown" from "this `Param` isn't a
runtime param", because we no longer use `Param`s at all in the latter
case.
- Rename `RuntimeParamIndex` to `CallParamIndex`.
As a side effect of removing the `ValueParamPattern` insts, this fixes a
minor diagnostic bug where `NoteInitializingParam` didn't identify the
specific parameter that led to a deduction failure, because it expects
generic parameters to only be represented by `SymbolicBindingPattern`s,
but before this change they could be wrapped in `ValueParamPattern`s.
This adds support for most of the remaining LLVM command line tools
using a generic, generated wrapper. The subcommand interface for these
is (much) less interesting than our other subcommands, but it gives us
a uniform and consistent layer.
Note that I structured these as nested sub-sub-commands below an `llvm`
subcommand because of an expectation that we will want to add more, and
ones that don't use this generic layer. Some concrete future work:
- Add the `opt` and `llc` tools as subcommands for easier debugging and
experimentation with LLVM IR output from Carbon's toolchain.
- Potentially sink `lld` below the `llvm` layer given that it has
significantly less user visibility than commands like `clang`.
Unfortunately, the current driver subcommand APIs make nested
subcommands awkward. I've added a somewhat rough hack here to let the
LLVM tools go in, but there are some TODOs that I want to address in
a follow-up that works to adjust the structure of this code to be more
conducive to nesting like this.
Depends on #5048 -- only the last commit should be reviewed here.
---------
Co-authored-by: Geoff Romer <gromer@google.com>
We end up needing to do this in any driver subcommand that reaches into
external code that may not be fully fuzz-clean. No need to grow multiple
different diagnostics for each, we can use a common diagnostic.
ASTUnit is owned by `CompileSubcommand`, passed through `Unit` to be
populated in `ImportCppFiles()` and used via `SemIR::File`.
When generating the AST, pass `-x c++` args to compile C++ (temporary
until we pass args properly).
`Cpp` namespace is marked as a special namespace and has dedicated logic
in `LookupNameInExactScope()`.
The logic for importing declarations from C++ to Carbon is in
`import_cpp.cpp`, but we're likely to want to refactor this
signfiicantly over time as it grows (perhaps a dedicated directory?).
Part of #4666.
We had a long discussion of this, so trying to document what seems to be
the conclusion... and also clean up the exceptions that I could find.
---------
Co-authored-by: Dana Jansens <danakj@orodu.net>
This removes the separately built and installed LLD binary. The symlinks
used by Clang when directly invoking LLD now point back to the main
`carbon-busybox` binary and dispatch through the newly added subcommand.
With this change we're down to shipping a single busybox binary in the
toolchain, removing duplicate installed copies of LLD and all its LLVM
dependencies. =]
The LLD subcommand works a bit differently from the `clang` subcommand
because the CLI for LLD is specific to which platform flavor of linker
is being invoked.
As part of this, I've extracted some of the common functionality in the
Clang runner into a base class that can be re-used. I expect to use this
again in a follow-up change to add subcommands to run other LLVM tools.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Dana Jansens
Richard Smith
Jon Ross-Perkins
josh11bandJosh L
Boaz Brickner
Geoff Romer
Chandler Carruth
Thomas Köppe
Alina Sbirlea