Commit Graph
16 Commits
Author SHA1 Message Date
Jon Ross-Perkins 7ccc1e0144 Expand naming for impls and functions (#5808)
Change impls from `<interface>.impl` to `<self>.as.<interface>.impl`,
and *member* functions to `<parent scope>.<fn>` (non-member functions
exclude their parent scope). Stop special-casing builtin functions,
given the new naming scheme.

The purpose of this is to make it clearer when a member function is
being accessed and, if so, which member function. In particular, we
often access interface `Op` functions. The builtin function
special-casing was intended to help with that, but we still have lots of
`Op` functions. This particular approach should make the interactions
clearer.

This changes up queueing of block IDs a little because, in particular,
we need to process bodies of entities only after constants finish
processing. But, it should also result in less memory usage during
processing because it means we have less on the insts stack at any given
time, since we track a block rather than all instructions contained by
the block.
2025-07-21 18:45:07 +00:00
Jon Ross-PerkinsandGeoff Romer eae3491129 Switch inst namer to queue entities when reached (#5806)
This switches from the `CollectNamesInBlock` approach for entities, to
instead traversing entities as they're encountered. For example, when
traversing constants, when a type is found, the entity will have its
block queued for processing.

This leads to a change in the traversal order, which affects
disambiguation done by numeric sequencing (since that's just showing the
traversal order).

This will allow for simpler "name based on name" logic. This is
something I plan to use for:

- impls: `<type>.as.<interface>.impl`
- functions: `<entity>.<member function>`
  - Note an impl may be used as the entity for a bound function.

By naming the entities as they're encountered, I'll be able to rely on
the generated names rather than recalculating them.

To assist this, I'm also differentiating between the ambiguous and
disambiguated name. Otherwise, we could end up with things like
`<function>.<disambiguator>.<call>.<other disambiguator>`, where the
repeated disambiguator may not be necessary in order to get full
disambiguation. It's also a smaller delta from the current output.

Note, changing `Name` to a class felt appropriate given its shape. I was
also noticing that parts of its API were unused, and the class helps
detect unused private members.

---------

Co-authored-by: Geoff Romer <gromer@google.com>
2025-07-21 17:58:55 +00:00
Jon Ross-Perkins 8cd1307711 Include the interface name in impl names (#5798)
i.e., `impl` -> `<interface>.impl`
2025-07-11 19:52:53 +00:00
Dana Jansens 28fea821b7 Add min-preludes to more slow tests (part 4) (#5682)
Adds min-preludes more tests which were seen as slow and their
surrounding neighbours. This drops the file_test runtime on my machine
from about 6s to about 4.5s.

For a few files that are clearly only testing diagnostics, we drop the
if-present semir ranges and the associated TODO.
2025-06-17 21:10:04 +00:00
Richard Smith 344f0b7550 Support for heterogeneous operators. (#5653)
Replace the binary `Operation` interfaces with the `OperationWith(T:!
type)` interfaces described in the design, and add a `Result` associated
type for both unary and binary operations. Update the `impl`s in the
prelude for integer types to use the new form, including supporting
implicit conversion of either operand.

I've tried to split this PR up into commits focused on distinct changes
for review convenience. It may be simplest to review it one commit at a
time.
2025-06-13 01:55:24 +00:00
Jon Ross-Perkins 26093656de Removes no-longer-needed --dump-sem-ir-ranges=only args (#5600)
The default was flipped by #5587.
2025-06-03 19:58:55 +00:00
Jon Ross-Perkins 2c013ada42 Update choice tests for ranges (#5525)
Note the amount of IR excluded is pretty small, but non-zero (mainly
prelude-related, due to the way a choice depends on `UInt`)

Renaming fail_todo_params.carbon to just params.carbon, and folding in
fail_invalid.carbon.
2025-05-22 22:34:12 +00:00
Richard Smith 797b14eb8e Import ImplWitnessTable into the imports block instead of the constants block. (#5374)
Don't import `ImplWitnessTable` into the `constants` block, because we
generally don't put `Unique` constants there. This matches the handling
of the other kinds of `Unique` constants. In order to keep the
instruction visible in formatted SemIR, add it to the `imports` block
instead.

Also fix a bug in the instruction formatter that resulted in
instructions in the `imports` block being omitted from the output if
they were only referenced by earlier instructions in the `imports` block
and by instructions in the `constants` block. This was already resulting
in some referenced instructions being omitted from the output, but also
occurred frequently for `impl_witness_table` instructions after this
change because it is common for the only reference to those instructions
to be from `impl_witness` instructions in the `constants` block.
2025-05-01 00:08:43 +00:00
Geoff Romer 34887403ab Model patterns as constant values (#5385)
This will enable us to simplify support for parameter and return
patterns in import, which operates primarily on constants.
2025-04-30 22:32:41 +00:00
Geoff Romer fafb655d39 Separate pattern types from expression types (#5360)
This is a step toward treating patterns as compile-time constants, so
that we can import them more easily.
2025-04-28 16:54:37 +00:00
Dana JansensandRichard Smith 0e8d354567 Split the witness table into a separate ImplWitnessTable instruction (#5272)
This allows us to import the table for a given impl only once, while we
can import many ImplWitness instructions with different specifics for a
generic impl.

For example in convert_facet_value_to_narrowed_facet_type.carbon we see
that a single witness table is imported for the BitAnd interface, with
multiple witnesses (for different specifics) imported and sharing the
same table.

The ImplWitnessTable now contains a back-link to the Impl the witness is
for, allowing inst namer to name that interface in the textual semir,
and allowing the interface to be found when debugging from a witness.

---------

Co-authored-by: Richard Smith <richard@metafoo.co.uk>
2025-04-11 20:30:04 +00:00
Richard Smith a74ca9071b Remove all remaining uses of TypeIds as instruction operands. (#5280)
In preparation for shifting from `TypeId`s potentially representing
attached types to always representing unattached types, using
[terminology suggested on
Discord](https://discord.com/channels/655572317891461132/963846118964350976/1359286326779973712).
This change causes us to track slightly more type spelling information
through SemIR.

One change that has significant impact on the SemIR output is that we
now build a `struct_type` instruction in each class representing the
types of the fields, including the spelling used for those types. This
is now no longer always identical to the corresponding canonical
`struct_type` for the object representation, so it's built separately
and owned by the class.

Also remove `TypeBlock` support entirely, as its only use was
representing `TupleType`s, which now use an `InstBlock`.
2025-04-10 20:53:42 +00:00
Dana Jansensandjosh11b 4539114c21 Return a set of ImplWitnesses from impl lookup (#5075)
A query facet type may contain multiple required interfaces, in which
case impl lookup should return an ImplWitness for an impl that is used
for each interface in the query. We bundle these together into an
instruction block and return that from impl lookup. The witnesses are in
the same order as the interfaces in the
`CompleteFacetType::required_interfaces`. This allows walking the
`required_interfaces` to find an interface to give an index that can
also be used to grab a witness from this set, or from FacetValue.

FacetValue now has an InstBlockId for the set of witnesses of the
FacetType, instead of a single ImplWitness instruction id.

FacetAccessWitness includes the index of the witness (determined from
the position in `required_interfaces`) of the witness it's accessing
from the FacetType.

The
toolchain/check/testdata/facet/no_prelude/fail_todo_call_combined_impl_witness.carbon
test demonstrates the fix in the resulting SemIR. We can see the calls
to methods on a multi-interface FacetType result in a FacetAccessWitness
with an index of the correct interface, and this results in a witness
that leads to the correct impl's function.

There is a TODO in member access, where it does not have a
`CompleteFacetType` yet, so it uses the index in
`FacetTypeInfo::impls_constraints` instead, but this can be incorrect in
the presence of named constraints, which when completed can add more
interfaces to the `CompleteFacetType` and which are sorted into an
arbitrary order with the rest there.

---------

Co-authored-by: josh11b <15258583+josh11b@users.noreply.github.com>
2025-03-10 16:00:35 +00:00
Alina Sbirlea 7fd54eded0 Reverse nesting of BoundMethod and SpecificFunction. (#5079)
During SemIR, when identifying a specific in a specific context, we'd
have to either look through a specific or through a bound method.
Canonicalize which one to look through first, by having the BoundMethod
created around a SpecificFunction instead.
This changes a lot of check tests.

TODO: As the SemIr does not currently allow removal (access to insts()
is intentionally const), the bound instruction created prior to finding
the specific is not removed from the instructions.
Options: (1) leave as is, (2) add a way to remove the previous bound,
(3) rethink how/when the BoundMethod inst is created.
2025-03-08 01:34:06 +00:00
Dana Jansens 0beda27192 Fingerprint impl blocks in semir (#5021)
This avoids the suffix changing when adding new impls to the prelude, or
in user code.
2025-02-26 22:47:57 +00:00
Dana Jansens 3f01310039 Make choice work for alternatives without parameters (#4815)
This adds support for choice types at a similar level to that of a C
enum, where each alternative has a name but no additional
data/parameters attached to it. We generate a TODO diagnostic if
parameters are specified.

Because there's no extra data, the storage is a simple unsigned integer
discriminant of the smallest possible size.

A choice without any alternatives is not constructible. A choice with a
single alternative is, and has an empty tuple in place of a discriminant
since it has only one state. The empty tuple is used to make the class
non-constructible. This can be improved.

Each alternative is turned into a let binding on the choice that is a
value of the choice with that alternative set as the active one in the
discriminant. This isn't possible to write in user code with a class
right now, since the let binding has the same type as the choice
(which is a class) it is within. It's possible to generate it in semir
however by adding the binding after the class is marked complete.
2025-02-19 16:37:36 +00:00