Rather than producing multiple constants with the same value, fold all
instances of a given constant to the same constant instruction.
A future PR will use this to replace the current type canonicalization
system.
The parse nodes are still tracked as part of the same value store
interface in order to ensure parity, but they're split out from Inst
itself in order to reduce the size of Inst -- the expectation is that
they don't need to be passed around quite as much.
This change doesn't actually reduce the passing very much, although
there are hints of it: AddInstAndPush doesn't typically need a separate
parse node from the one on the Inst itself, for example. In a couple
spots I changed code to rely a little more on the InstId until the
ParseNode is needed, but it's very low hanging fruit where done. I think
convert could do more to not eagerly fetch the parse node before its
use, but more cleanup felt it would be easier to handle separately. I'm
currently viewing this as making such cleanup _possible_ rather than
executing on it up-front.
But also, I want to make sure there's a consensus to head in this
direction before pulling the trigger. We speculated that this would
result in the parse node being passed around less, and I do think that's
the case, although it's a bit fuzzy in the change.
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
This is accomplished by tracking an extra bit on the ID we store in the
constant values table, and propagating that from subexpressions to the
enclosing expression. This extra bit is not yet computed correctly for
types; that will be addressed in later PRs.
---------
Co-authored-by: Chandler Carruth <chandlerc@gmail.com>
Form a side table with constant values for each instruction. Evaluation
is only supported for a few very simple kinds of instruction for now.
This is not observable outside of the SemIR output, because nothing
depends on expressions having a constant value phase yet.
This change adds a `BindSymbolicName` instruction for generic bindings,
paralleling the existing `BindName`. A mechanism is also added to allow
both kinds of binding to be accessed uniformly, for convenience in the
case where the two different kinds of binding are treated the same.
Generic bindings of type `type` are allowed to be used as types,
although no operations are provided for such types. For now lowering
treats these types as empty structs, which seems like a reasonable
lowering for non-monomorphized unconstrained types.
This is a step towards adding enclosing scopes for imports. It creates
an indirection for all bind names.
We discussed specializing for bindings that are in function scope (i.e.,
not a useful enclosing scope for imports or diagnostics). However, the
thought is to go ahead with this singular approach for now, and only
change structure if it's a performance issues so that we have
incrementally fewer instructions to handle.
Add a mechanism to define instruction categories, to support inspecting
the common representation of similar kinds of instruction. Use that
mechanism to make formatting of branch instructions slightly more
type-safe.
The idea here is to use the existing `Inst` mechanism for converting to
and from structs, extended to operate on a struct representing multiple
different kinds of instruction. In this case, the concrete kind of
instruction is stored in the struct in a `kind` field, rather than being
implied by the type.
Factored out of #3555 where this mechanism is used to provide a common
interface for runtime and symbolic name bindings.
We have `StringLiteral`s in multiple other `Carbon` sub-namespaces.
Rename to a more specific name to avoid collisions.
We should likely also rename `Carbon::IntId` -> `Carbon::IntValueId` and
`Carbon::RealId` -> `Carbon::RealValueId`, but this collision is
prioritized because it was blocking work on typed parse nodes which
introduces a `Carbon::Parse::StringLiteralId`.
This builds out a little infrastructure for one name scope to `extend`
another. We'll need more refinement here to cover other cases, but this
should provide some foundation for that future work.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Adds a `LazyImportRef` instruction. Versus `CrossRef`, this is intended
to represent an instruction which cannot be used directly, and must be
replaced when it comes up due to name lookup. The intent is to use this
to avoid recursive loading of imported IR instructions.
Note, under this model, when `ResolveIfLazyImportRef` is called, it
essentially needs to load both inst and type information to a sufficient
point where any further attempts would hit name lookup again. That will
probably be complex, and the current implementation is just touching the
surface of the issue. I was heading down this route because it would
mean we have a limited number of points that need to consider whether
they're going to talk about a `LazyImportRef`.
I'm considering whether `CrossRef` should be dropped in favor of more
specific `Builtin` special-casing, due to the divergence of desired
behaviors. This could mean dropping the `builtins` IR since it's not
looking useful right now.
Modify `NameScope` to track whether the scope is associated with a load
error. This is to handle cases where one or more imports failed, so we
do not want to issue warnings for related scopes.
The 0-size on `ValueStore` comes up due to the changes to `NameScope`,
which make it too large for the default handling. After discussion with
zygoloid, the thought was we might want to try reserving a roughly
correct value based on parse node counts, but the stack default wasn't
buying much.
Fixes a bug where the implicit import used the package name instead of
the invalid identifier.
This is also doing the parse node split, allowing lower reliance in
formatter on the tokenized buffer (something that I may be touching more
due to import handling).
Most of the calls to `StringifyType` already passed `true` for
`in_type_context`. Checking the rest, I found that every one of them was
already sufficiently clear that they were printing a type, or could be
made so with a very small change to the diagnostic text.
This creates a namespace for `package` scope.
It looks like names of class_decls in namespaces lead to an unexpected
instref. This is already true, as best as I can tell. I'm not sure if
there's a preferred approach to address that, so I've left a TODO for
now.
This removes the filename from the file-scoped block, and places it
above to make it clear where the full SemIR begins (with multifile,
providing a barrier between).
I was suggesting this because `FloatingPoint` is pretty long. `int` and
`float` should be familiar abbreviations. `unsigned` should be familiar
to developers too, but `UnsignedInt` still feels usefully clearer for
the additional chars.
This adds instructions so that we get printing. I may adjust the
instruction format a little further to add a type, but I think the basic
setup will remain.
Note this builds on #3414
Instead of ad-hoc conversion tracking on some kinds of nodes that
conversion creates, consolidate tracking into a single node kind. This
frees up an operand on `Init` instructions that can be used to store the
destination.
Add a `NameId` that is effectively just a wrapper around a `StringId`,
with
some additional predefined values for names that don't correspond to
strings, such as the name of `self` or the function's return slot.
Following up on discussion yesterday regarding this split.
Note, I'm expecting #3341 to do IdentifierId -> NameId in SemIR. It
might be worth adding NameId creation directly to StringStore if you're
content with this setup though.
Adds a `BoundMethod` SemIR node to represent an `x.F` bound method, with
a new builtin type `BoundMethodType`. Reorganized conversion of call
expression arguments to also check and convert a `self` parameter in the
implicit parameters list.
In passing, improved diagnostics and error recovery for bad call
expressions. We now build a `call` node with the appropriate type and
value category, but with invalid arguments, if the argument conversion
failed, and diagnose calls to non-callable expressions.
`addr self` methods don't work properly yet; the `addr` is ignored for
now.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
This replaces the use of `VarStorage` in this case.
Add an `UnboundFieldType` type as the type of a field, in cases where
it's referenced without an accompanying object.
Add a `BindName` node to describe the name binding performed for both
variables and fields so that we can handle them more uniformly.
1. In general, `semantics_ir` -> `sem_ir`, to match the directory name.
2. For the list of `ValueStore`-related accessors on `SemIR::File`, add
them to `check`'s `Context` object, shortening access.
Finishing what #3316 started, add more bespoke ValueStore-like
structures to File. With this, the things which previously had somewhat
boilerplate Add/Get functions are now all on side classes, giving a
uniform style of API for calling.
Note, I was on the fence about making things public on ValueStore. If
it's preferred that I make some things there protected I certainly can,
there's just a trade-off that may mean more distinct child/wrapper
types.
Retain the `ClassDeclaration` node to represent a syntactic declaration
of a class (including possibly a declaration of a generic class), but
use a separate SemIR node to represent the class type itself. This
allows us to give the two separate treatment.
The `ClassDeclaration` is still entered into the name lookup table for
its enclosing scope, but when it is named in an expression, the class
type is produced instead. When the class declaration is named in a
declaration name, it can be used to define members of the class, but an
expression that resolves to the class type cannot be used to define
members of the class.
In order to distinguish these cases, use `Name` rather than
`NameExpression` for the left-hand side of a `QualifiedName` parse node.
This removes the only use of the `Expression` form of a declaration
name, so that is also removed.
In the future, `ClassType` will also be used to describe types such as
`Vector(T)`, for which there is no corresponding `ClassDeclaration`.
Building on #3313, start using ValueStore on File. Functions and classes
are straightforward. Types here I present as a borderline case where
maybe we want a more bespoke API, but maybe this is okay? Most other
things probably need a slightly different API, which although I might do
that for a consistent interface, felt more out-of-scope for this change.
Split `node.h` into separate files for ID types (`id.h`) and for typed
nodes (`typed_nodes.h`). The per-node-kind data is now specified as part
of declaring the typed nodes, and is removed from the node kinds
x-macros, which now simply enumerate the node kinds.
Building on #3311, change SemIR to use the SharedValueStore. Since this
removes hermeticity, raw output no longer prints ints, reals, and
strings. TokenizedBuffer accessors are modified to return IDs because
values are often passed through in semantics without needing to read
them.
I would've put SharedValueStores on Context, except for the
GetArrayBoundValue convenience method. I felt awkward removing that, so
it's on File, at least for now. That's then used by the formatter and
Lower too. The flipside of this is that TokenizedBuffer has a
SharedValueStores only for printing, so maybe that's similar enough to
what File is doing.
This doesn't start shifting other SemIR members to ValueStore, but that
seems like a next step.
This includes being able to define a class that was previously
forward-declared, and being able to define a member function out-of-line
that was previously declared inside a class.
No support for fields or methods yet, and a class definition doesn't yet
cause the class to be treated as a complete type.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Track the callee expression in full, instead of only tracking the
callee's FunctionId. This results in the `name_reference` denoting the
function actually being used.
Lowering now propagates a `llvm::Function*` as the value associated with
expressions of type `<function>`.
We were not creating `NameReference` node for names produced by member
access into a namespace, such as the second name in
`Namespace.Function`, which caused lowering of calls to such names to
fail. This is now fixed, but the resulting `NameReference` node only
refers to the name and the lookup result, not to the `Namespace.`
qualifier. We'll need to decide how to fit a third operand into that
node (perhaps we can stop storing the `name_id`, since it can be derived
from the lookup result) but for now the qualifier is not tracked.
Don't produce an error diagnostic if any of the information leading to
identifying that error is itself known to be affected by an
already-diagnosed error.
Bug found by fuzzing. Problem was untyped SemIR nodes had an invalid
type id, which was retrieved by `HandlePrefixOperator` and then passed
to `context.GetUnqualifiedType`, ultimately performing an invalid access
in `semantics_ir_->GetNode`.
We prefer to make a placeholder type for functions and namespaces to
remove the need for checking for the untyped case everywhere. Eventually
functions will have their own types, but this approach will be needed
for namespaces (and perhaps other non-first-class entities like unbound
methods and interface members) long term.
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Richard Smith
Jon Ross-PerkinsandRichard Smith
josh11b