Remove the type canonicalization mechanism and instead rely on constant
canonicalization to deduplicate types.
Rename the `Canonicalize*Type` functions to reflect that they're no
longer performing canonicalization. Switch code that creates types due
to semantic checking, rather than due to source syntax, to directly
create type constants through evaluation rather than creating an
instruction and evaluating it to produce a separate constant
representation.
The mapping from `const (const T)` that was previously performed by type
canonicalization is now implemented in expression evaluation instead.
The value `<error>` is now treated as a constant value, with a special
property that an instruction involving `<error>` that could possibly be
constant evaluates to `<error>`. This helps avoid producing follow-on
errors when an error occurs as a subexpression of an expression, such as
a type, that is intended to be constant.
Rather than producing multiple constants with the same value, fold all
instances of a given constant to the same constant instruction.
A future PR will use this to replace the current type canonicalization
system.
Instructions created by splices during conversion are now evaluated, as
are instructions created in cases where we first create a placeholder
instruction and later replace it by a different instruction.
This also removes the ability to set a parse node and instruction
independently after creating an `InstId`, which could lead to them
accidentally not matching.
This is accomplished by tracking an extra bit on the ID we store in the
constant values table, and propagating that from subexpressions to the
enclosing expression. This extra bit is not yet computed correctly for
types; that will be addressed in later PRs.
---------
Co-authored-by: Chandler Carruth <chandlerc@gmail.com>
Form a side table with constant values for each instruction. Evaluation
is only supported for a few very simple kinds of instruction for now.
This is not observable outside of the SemIR output, because nothing
depends on expressions having a constant value phase yet.
Namespaces are copied, which means also adding their name to the
underlying instruction. It happened not to be done previously; the name
was only in name lookup.
Since the only import supported right now is the default import,
functionality is limited; in the future I'll need to deal with namespace
vs package conflicts.
Tests of namespace imports are under "namespace" -- I figured this would
be best for scaling as more instructions get support.
This also improves some debugging-related output that I was trying to
use while trying to build the support.
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
By adding an InstId to the NameScope, we can determine whether the
declaration is being added to a scoped entity (versus a namespace).
The choice of InstId on NameScope is chosen versus other solutions
because, for imports, we want to just have a list of InstIds to import
and, from those, get the containing namespaces for addition. Similar may
also be desirable for printing fully qualified names given a singular
InstId. That means an InstId must have a path to find enclosing name
scopes.
What we're looking at here is:
- NameScopeId knows its InstId. (done here)
- Inst knows the enclosing NameScopeId. (future work)
- To walk up enclosing scopes for an Inst:
1. Fetch the Inst.
2. Find its enclosing NameScopeId (which will be per-declaration due to
Function etc complexity).
3. Fetch the NameScope if not Package scope. (if Package scope, done)
4. Use the InstId on the NameScope to go back to step 1.
This builds out a little infrastructure for one name scope to `extend`
another. We'll need more refinement here to cover other cases, but this
should provide some foundation for that future work.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Another incremental change to diagnostic formatting. I simply recurse
over all the tokens in the subtree of a parse node and construct a
`DiagnosticLocation` that covers all of the tokens.
I believe it's nicer for the user to be directed at the entire chunk of
source where the error is occurring rather then just pointing at the
bracketing/terminator tokens, but let me know if you all agree.
This is enough to support calling methods that take a `Base` or `Base*`
as their `self`. But name lookup doesn't look in the base class yet, so
base class methods aren't actually found.
BinaryOperatorAdd had been added early on as a proof-of-concept for
toolchain design for parsing -> checking flow. However, it doesn't
reflect the interface direction for operators, and now other portions of
the toolchain demonstrate the relevant logic. Instead, it's just a bit
of an outlier versus other instructions which have evolved over time.
This creates a namespace for `package` scope.
It looks like names of class_decls in namespaces lead to an unexpected
instref. This is already true, as best as I can tell. I'm not sure if
there's a preferred approach to address that, so I've left a TODO for
now.
This removes the filename from the file-scoped block, and places it
above to make it clear where the full SemIR begins (with multifile,
providing a barrier between).
This is an incremental improvement on our diagnostic messages that
simply underlines an entire token if the token is larger than 1 char
(else it points to the single char with a caret like it used to).
For now, we require the same introducer to be used each time a class is
declared, but see #3384.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Instead of ad-hoc conversion tracking on some kinds of nodes that
conversion creates, consolidate tracking into a single node kind. This
frees up an operand on `Init` instructions that can be used to store the
destination.
Add a `NameId` that is effectively just a wrapper around a `StringId`,
with
some additional predefined values for names that don't correspond to
strings, such as the name of `self` or the function's return slot.
When declaring a name such as `fn Ns.Class.F() { ... }`, enter the
scopes of `Ns` and `Ns.Class` as we form the name, and remain in those
non-lexical scopes until the end of the declaration.
When performing an unqualified lookup, look in any enclosing non-lexical
scopes in addition to looking into the lexical name table.
We now track a scope index with each lookup result in the lexical name
lookup table. This is used to determine whether a lexical or non-lexcial
result is the innermost result and whether a declared name is in the
same scope as some previous introduction of that name or in a nested
scope. For now, this could just be the index into the scope_stack, but
the intent is to also use this to detect names being declared after they
are first looked up, which requires the indexes to outlive their scopes,
so we use a persistent numbering of all scopes instead. The persistent
numbering also permits more invariant checking.
Per the design, field access into a class value expression is a value
expression, even though we could produce an ephemeral reference
expression instead and avoid performing a value binding. This slightly
pessimizes class member access in some cases, but we should be able to
restore the old generated code by deferring actually performing the
value binding until a value expression is needed.
The value in the name lookup table is the class declaration. Map it to
the class type when it's found by lookup in an expression. This differs
from the behavior in a declaration name, where we want to find the class
declaration itself.
If the initializing representation is the same as the value
representation, don't materialize a temporary and perform a value
binding. Instead, directly extract the value, using a new
`value_of_initializer` node.
This removes a lot of redundant `alloca`s from our generated LLVM IR.
Adds a `BoundMethod` SemIR node to represent an `x.F` bound method, with
a new builtin type `BoundMethodType`. Reorganized conversion of call
expression arguments to also check and convert a `self` parameter in the
implicit parameters list.
In passing, improved diagnostics and error recovery for bad call
expressions. We now build a `call` node with the appropriate type and
value category, but with invalid arguments, if the argument conversion
failed, and diagnose calls to non-callable expressions.
`addr self` methods don't work properly yet; the `addr` is ignored for
now.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Add support for member access into classes, for both non-instance
members and for fields.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Track the fields in a class, and generate a corresponding struct type as
the object representation for the class. For now, we always use a
pointer as the value representation for a class.
This replaces the use of `VarStorage` in this case.
Add an `UnboundFieldType` type as the type of a field, in cases where
it's referenced without an accompanying object.
Add a `BindName` node to describe the name binding performed for both
variables and fields so that we can handle them more uniformly.
Richard Smith
Jon Ross-Perkins
josh11b
Jacob Schneider