EvalOrAddInst has to create a non-canonical instruction for evaluating a
few typed insts, such as LookupImplWitness which uses an InstId to
provide a location for diagnostics.
But the output of the function is a ConstantId. We do not have access to
the non-canonical InstId after the function returns. But if the constant
value was symbolic, it was being attached to the inst, and the inst
would be added to the eval block of the enclosing generic. This
needlessly added semir for a symbolic value.
The ConstantId returned by EvalOrAddInst can be used immediately, such
as to evaluate an ImplWitnessAccess. In that case, the final evaluated
result is all we need to keep in semir.
If the ConstantId needs to be replaced by specifics, it is only as part
of some other instruction, since ConstantIds themselves are not modified
by specifics, instructions are. In that case, the canonical instruction
in the constant value would have been added to some other (now symbolic)
instruction, which would be replaced by a specific.
This has no functional change, but it reduces runtime overhead and semir
output for LookupImplWitness and ImplWitnessAccess.
Performing a lookup against `Self` inside the definition of the named
constraint leads to cycles, as described in the document [Self
contradictions in Named
Constraints](https://docs.google.com/document/d/17rn2XmME8o2MM4OJqatSVuMa1iYZ1PAgcNrf0PXR9Q4/edit?tab=t.0).
To prevent those cycles, this change introduces a large refactoring of
impl lookup.
The impl lookup done inside eval is reduced to only performing
monomorphization. That is it:
- Only looks for an provides final witnesses.
- Is not allowed to identify the facet type of the query self.
- Returns either a final witness or None (or an error)
The paths for finding non-final witnesses are now done outside of eval,
directly in the initial `LookupImplWitness()` function. If no final
witness it found through eval, the resulting non-final
`LookupImplWitness` instruction witness is returned. It does not produce
cycles to identify the facet type of query self outside of eval, since
that does not result in repeating the identification when resolving
specifics of the named constraint or require decl.
Move the ArrayStack for Context::require_impls_stack into a new class
which tracks a NamedConstraintId (or InterfaceId) for each frame of
RequireImplsIds, so that in type completion we always can find the
correct frame for a given named constraint which is still being defined,
in order to find the RequireImplsIds in the in-progress definition.
The `CompleteTypeWitness` can be concrete. This avoids making a symbolic
`CompleteTypeWitness` value which itself has a concrete
`CompleteTypeWitness` value with the same operands.
This enables some nice simplifications, and it's also a step toward a
broader restructuring of binding and parameter patterns.
Assisted-by: Gemini 3.1 Pro via Antigravity
When a `var` is not explicitly given an initializer, initialize it in
one of two ways:
* If its type implements the new interface `Core.Default`, call
`Core.Default.Op` to initialize it.
* Otherwise, if its type implements `UnformedInit`, leave it in an
unformed state. For now, this is always an uninitialized state, but that
will change in the future.
* If neither of those apply, the `var` declaration is ill-formed.
This is a step towards implementing leads decision #6739 and proposals
#257 and #5913.
Assisted-by: Gemini 3.1 Pro via Antigravity
---------
Co-authored-by: Geoff Romer <gromer@google.com>
This resolves some todos, and makes `Convert` safer to call, which
unblocks some changes in pattern matching that I'm working on.
Assisted-by: Gemini 3.1 Pro via Antigravity
Previously we forced a temporary materialization, resulting in it being
treated as an ephemeral reference expression. This change allows
```carbon
var x: Class = {} as Class;
```
even when `Class` is not copyable.
This case is redundant: when deducing against a runtime parameter
pattern, the type is all that matters, and the type is added to the
deduction earlier. Additionally deducing the same argument against
parameter's subpattern just creates duplicate work, because the
subpattern has the same type.
This includes checking and lowering for concrete form literals. Support
for symbolic forms is future work.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
This uses the `CARBON_KIND_ANY(AnyImportRef, auto import_ref):` syntax
that seemed to be favored [on
Discord](https://discord.com/channels/655572317891461132/655578254970716160/1478486848207720478).
This converted uses in the `sem_ir` directory to show it works
initially, then added `check` for full coverage plus validating the
`SemIR::` namespace discard.
Note in inst_namer.cpp, AnyBindingPattern includes FormBindingPattern
which wasn't previously handled.
I'm disabling clang-format because I think it formats with readability
issues, e.g.:
```
#define CARBON_KIND_ANY_EXPAND_AnyBinding(X, SEP) \
X(::Carbon::SemIR::AliasBinding) \
SEP X(::Carbon::SemIR::FormBinding) SEP X(::Carbon::SemIR::RefBinding) \
SEP X(::Carbon::SemIR::SymbolicBinding) \
SEP X(::Carbon::SemIR::ValueBinding)
```
Since `SEP` is typically a comma, it's also a nuisance to treat as an
argument to `X` (which could get better results).
Assisted-by: Google Antigravity with Gemini 3 Flash
This is a step toward removing the index from `InitForm`, so that equal
form values always have equal representations.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
This is iterating on how `Destroy.Op` generates, to start adding body
capabilities. This changes the way the signature is created, and adds a
`CoreWitness` function kind so that mangling can prevent name
collisions. The result is that what _was_ `DestroyOp` is now
`Core.Destroy.Op` or, as can be seen in
toolchain/lower/testdata/interop/cpp/nullptr.carbon,
`_COp.<hash>:core.Destroy.Core` where `:core` is indicating that it's a
core witness (taking a note from `:thunk`).
Assisted-by: Google Antigravity with Gemini 3 Flash
This allows us to capture the location at which a type literal was used,
even in the cases where we don't otherwise need to create a new
instruction to represent the type such as for `char` or `str`.
The logic used to build the underlying type is now marked as desugaring.
For cases such as `iN`, this causes the call to `Core.Int` to no longer
be added as a dedicated IR instruction, and instead its constant value
is used directly as the value of the `type_literal`. This results in
this being on balance a reduction in the size of the IR.
This also fixes a crash in C++ interop when using a `char` literal as a
template argument. The crash was caused by the template argument not
having an associated location when mapping to a C++ location. See
changes to check/testdata/interop/cpp/template/type_param.carbon for an
example that used to crash before this change.
Update alias handling to allow an alias to point at any type literal,
reinstating support for aliases for type literals such as `bool` and
`i32` that had previously worked but stopped working when we
transitioned those types to being defined in the prelude. See changes to
toolchain/check/testdata/alias/builtins.carbon.
All the test changes other than the two mentioned above are mechanical
autoupdate changes switching to the new instruction.
Introduces `Context` and `SoftContext` messages, which can be introduced
through a `ContextBuilder`:
- The `Context` messages come before the diagnostic in the output.
- The first `Context` message steals the diagnostic level from the main
diagnostic, and turns the main diagnostic into a Note attached to the
context.
- A `SoftContext` message works similarly, but if it's preceeded by a
`Context` or `SoftContext` message, then it is dropped. This can be used
as a default/backup scope when nothing more interesting is provided up
the stack, such as in `TryEvalBlockForSpecific`.
The `ContextBuilder` is provided to a callback through
`Diagnostics::ContextScope`, an RAII type `AnnotationScope` but for
context messages.
This allows a high level operation to provide a context message like
"failed to identify facet type {0}" which will then be used as the error
if a diagnostic is produced during identification, with the latter
diagnostic attached as a note to explain why the contextual operation
failed.
In particular, this allows monomorphization errors (such as an array
bound being negative) to be attached to a higher lever operation instead
of being top-level diagnostics themselves, with the monomorphization
site being a note. This inverts the source code locations that appear in
the diagnostic, so that the top-level diagnostic points to the "user
code" which causes the monomorphization.
This is presented as an alternative strategy to #6753, which plumbed
diagnoser callbacks around to achieve the same goals.
We replace the diagnoser callbacks in type completion and operators with
ContextScope callbacks instead, which now provide better diagnostics for
monomorphization errors. Other callers to MakeSpecific do not yet have
ContextScopes introduced in order to turn monomorphization errors into
more interesting diagnostics.
This shifts logic a little so that empty top-level scopes are printed
less often. This affects imports mainly for now, but should be expected
to affect the soon-to-be-added generated scope more significantly.
Assisted-by: Google Antigravity with Gemini 3 Flash
Implementation of unused pattern bindings #2022, continued.
Whereas previous PR #6460 took care of parsing, and PR #6479 prepared
the stage by using _ in some test cases, this PR has the the actual
implementation, using a simple dataflow analysis.
---------
Co-authored-by: Burak Emir <bqe@google.com>
Co-authored-by: jonmeow <jperkins@google.com>
Currently each interface has a `Self` facet internally that becomes a
binding to every entity inside the interface: associated constants,
functions, and require decls. Each of these has to be independently
generic as a result. This makes is challenging in extended name lookup
to move into an extended scope of an interface, as we have a specific
for the interface, but the names within require a different specific
that includes a `Self` facet value.
We generalize this relationship by adding a second generic to Interface,
called `generic_with_self`. When we want to work with entities inside
the interface, we move from the interface-without-specific to the
interface-with-self specific by adding a Self to the specific. This is
done independently of any particular entity inside the Interface, as
those entities are now all members of the interface-with-self generic.
Associated constants no longer need a generic of their own, as they do
not have separate generic bindings. Functions retain a generic, but if
the function has no generic arguments, it will have no bindings of its
own now.
Require decls retain a generic so that their specific can be
instantiated separately from the interface. Requiring the interface to
be complete does not require the types in a require decl to be complete
unless it is modified by `extend`. So we allow them to be completed
later by keeping them in a separate generic.
Named constraints look like interfaces and gain the additional inner
generic-with-self, with the same relationship to require decls.
This removes the need for name lookup to perform Substitution of a Self
facet into the extended scope instruction. Instead, the
`SpecificConstant` instruction inserted by a `require` decl is part of
the interface-with-self generic. When looking through a FacetType for
extended scopes, for each interface, we push the scope with the specific
for the interface-with-self. Then the constant value of the
`SpecificConstant` is correctly modified by the provided self
automatically through applying that specific.
This is related to #6727, but is generally a necessary fix even without
that issue. I'm not adding a specific test of #6727 because it should
also be covered by the tests in #6726.
Assisted-by: Google Antigravity with Gemini 3 Flash
Add support for compile-time functions. `eval fn` is analogous to C++
`constexpr`, and is evaluated at compile time when it has compile-time
arguments. `musteval fn` is analogous to C++ `consteval`, and requires
that its arguments be available at compile time and is always evaluated
at compile time. For now we require the modifier to match across
redeclarations of the function. The specific modifier syntax here is a
placeholder and not yet part of an approved design.
Limitations: Only very basic support for evaluation is provided. So far
there's no support for mutable state or `if` expressions, but otherwise
control flow and passing and returning values should work. Carbon
evaluation recursion is modeled by C++ recursion for now, so you can
overflow the toolchain stack easily. Functions that use in-place
initialization will generally not work yet, as they are modeled as
passing a non-compile-time-constant reference to a temporary to the
call.
Add missing categorization of `name_binding_decl` as `NotExpr` to match
other similar declaration instructions like `FunctionDecl`, so that we
can uniformly skip over them when they occur within function bodies.
Assisted-by: Gemini 3 Pro and Flash via Antigravity
The primary change in this PR is to split the `Initializing` expression
category into separate `ReprInitializing` and `InPlaceInitializing`
categories, depending on whether initialization uses the types
initializing representation, or is guaranteed to be in place. It also
rationalizes and documents the SemIR-level semantics of those categories
(including where #5545's "ephemeral entire reference" category will
fit), and introduces two new inst kinds to close gaps exposed in the
process.
Some additional secondary changes:
- Consistently format the storage arguments of initializers with `to`,
regardless of whether initialization is in-place, and document the `to`
notation.
- Rename some inst kinds and functions, and restructure some of the
code, for clarity and consistency with the new documentation.
- Resolve a TODO to handle more category conversions in
`CategoryConverter`, in order to make it easier to reason about category
conversions.
See #6588 and the review history of this PR for background.
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
For example, see toolchain/check/testdata/class/fail_incomplete.carbon
for the diagnostic changes. `IncompleteTypeInFunctionReturnType` should
remain, while the redundant `IncompleteTypeInFunctionParam` is removed.
Note I'm deliberately trying to validate the return type after other
parameters, because I think that's the better user experience. This does
also incrementally change IR.
The general strategy here is to import the constructor with a signature
that directly matches the argument. The intent is that the imported
function will eventually be usable directly as the `ImplicitAs.Convert`
function in a generated `impl`.
For initialization from a tuple, for example `(1, 2)`, we import the
selected constructor with a signature that takes a tuple pattern:
`fn Class.Class((a: i32, b: i32)) -> Class;`
In order to support that, this PR also adds support in general for tuple
patterns in function signatures. It turns out the implementation was
already very close to allowing this.
Assisted-by: Gemini 3 Pro via Antigravity
This gets us a step closer toward resolving TODOs in member access
around facets, by making the lookup into a facet value a "lookup in
base" operation instead of a "lookup in type of base". However the base
given to find scopes in still remains the facet type of the facet, which
is still a TODO.
Then we can simplify the "lookup in type of base" case a bit, with a
single code path doing the name lookup step. But we keep a TODO where if
the type of base is a facet, we change the lookup target to be the facet
type of the facet instead.
This is toward having name lookup into an interface that is extending a
named constraint work correctly with a `Self` in its specific. To
perform that name lookup, we will need to tell name lookup what is the
base, so that it can replace `Self` with the base. This change gets us
in a position where we can correctly provide the base in the `T.F()`
(lookup in facet) and `t.F()` (lookup in type of facet) correctly and
straightforwardly.
We provide a marginally improved diagnostic when looking into a facet
with an incomplete facet type, which will move into
AppendLookupScopesForConstant once we are looking into the facet
directly instead of its type.
The key changes are:
- Function output parameters are now prefixed with `out`, and more
consistently formatted as named parameters.
- Function and inst output arguments are now written as part of the inst
form, rather than as one of the inst arguments.
As a drive-by fix, this also changes `Temporary::storage_id` from
`DestInstId` to `InstId`, because it doesn't represent an output
parameter of the `Temporary` inst itself.
See the review of
[#6532](https://github.com/carbon-language/carbon-lang/pull/6532) and
[this Discord
discussion](https://discord.com/channels/655572317891461132/999638000126394370/1458268977020141589)
for additional background.
This adds the necessary parser infrastructure to recognize and parse
lambda expressions in Carbon.
Key changes:
- Added and Parse Node Kinds.
- Updated to use to accommodate the growing number of node kinds.
- Implemented parser states and handlers for lambda syntax ( or ).
- Added structure to .
- Added diagnostics for missing lambda bodies.
- Added a stub in phase to defer semantic analysis using .
- Added parser tests for lambdas.
Also clarify and enforce that `ConversionTarget::init_id` is used only
as storage for in-place initialization, and correspondingly rename it to
`storage_id`.
Not all functions have a return slot, and once we have composite forms,
functions will be able to have any number of return slots. Obtaining a
unique return slot for a function only makes sense in `returned var`
handling.
The main changes here are:
- Introducing `InitForm` and `RefForm` to represent initializing and
reference forms (the two return forms currently supported by the
parser).
- Introducing the `FormType` singleton inst to represent their type
(i.e. `Core.Form`).
- Emitting an inst representing a function's declared return form as
part of handling the function signature.
The return form inst is currently ignored. Subsequent PRs will expose it
in `SemIR::Function` and use it to determine the form of call
expressions.
This approach is more robust because there's no intermediate state where
the `ParamPattern` insts have been created, but don't yet have their
final values.
Pursuant to recent decisions on #6124, switch `Destroy` to use a
`CustomWitness` for its implementation. Right now this is manufacturing
no-op implementation functions on each lookup, which obviously isn't
ideal but is intended as a first pass. I'm mostly trying to find the
right balance between updating the approach to reflect new decisions,
while still breaking apart work in a way.
The `CoreInterface` logic is intended to build on `CoreIdentifier`
support. We have a number of additional interfaces that require
specialized logic, and that'll extend pretty far with C++ interop, so it
seemed easiest to have a generic function for it. That's what's
replacing the logic inside C++ interop that was doing string comparisons
(which could have already been moved to `CoreIdentifier`, I just missed
it in my first pass).
This adds `CustomWitness` support because the `Destroy` witnesses can be
imported cross-file. `CustomWitness` was previously only used for C++
types, which don't yet support import, which is why that wasn't
previously an issue. The addition of `query_specific_interface_id` is
similarly needed in order to get correct sorting of witness blocks when
imported.
This PR also removes builtin constraint logic (note this is in a
separate commit to help review; it's not a separate PR because it's
difficult to split apart without tests breaking). This had been made
generic with the expectation that destroy, copy, move, and conversions
would all need related support. Under the new decision, we are not going
to do blanket impls and will instead just manufacture a `CustomWitness`
for everything.
A lot of SemIR fingerprints change, but that's probably because the
addition of `Destroy` on core classes is yielding structural changes.
The impl's body block has to end before we make its ImplDecl
instruction, and the witness instructions come later, so they don't end
up in the body block. Currently they just end up in the enclosing (file,
typically, or class) scope block.
Add a new InstBlockId to Impl for holding witness instructions, and
explicitly insert them into that block. Then include those instructions
into the scope of the Impl for naming, and format them into the Impl
right after the body block.
This is based on #6484
Instead of naming the root namespace `package` (because it's accessed by
the `package` keyword), change it to use the current package name. Note,
buried in the checksum changes,
`toolchain/check/testdata/package_expr/fail_not_found.carbon`:
```
- // CHECK:STDERR: fail_not_found.carbon:[[@LINE+4]]:16: error: member name `x` not found in `package` [MemberNameNotFoundInInstScope]
+ // CHECK:STDERR: fail_not_found.carbon:[[@LINE+4]]:16: error: member name `x` not found in `Main` [MemberNameNotFoundInInstScope]
```
for:
```
// CHECK:STDERR: var y: i32 = package.x;
// CHECK:STDERR: ^~~~~~~~~
```
I'll leave it to you if you prefer this; the alternative I see is to
just rename `IsCorePackage` to `IsImportedCorePackage`, and/or change it
to a helper that takes a `Context` and does the right thing with
`parse_tree` (which, I need for `Destroy`-related reasons and was my
default approach).
Explicitly run `RequireCompleteType` for an impl's facet type constraint
in two places:
- For a new `Impl` declaration that is `extend`
- At the start of the `Impl` definition
Stop trying to RequireCompleteType in the definition when constructing
the witness. If we have a rewrite of a name in `.Self`, then we can
construct a full witness, otherwise we defer to the definition.
Now GetOrAddImpl does not need to track `is_definition` anymore, so we
remove a lot of plumbing.
We inline the `AllocateFacetTypeImplWitness` since it has a single
caller and it is just 2 lines, to help improve understanding of the
steps and comments in setting up the impl definition.
Note that this puts the `RequreCompleteType` instruction into the
definition's generic eval block always, avoiding the issue of ensuring
that each generic redecl has the exact same instructions, and forcing
coordination to have `RequireCompleteType` inserted into every
declaration's eval block or none. The result also more closely matches
the design, with the complete type not being required until inside the
definition.
This is part of #6420 which is being split up into a chain of smaller
PRs. It is based on #6469.
I need this in a forthcoming PR, to reliably get the `Function` that was
originally used to build a `Call` inst, but even as a stand-alone
change, it seems to nicely improve the textual SemIR.
This separates the return type from the return pattern, and replaces the
return pattern with a block of return patterns. This is a step toward
support for `ref` returns (where there's no corresponding return
pattern) and compund-form returns (where there may be multiple return
patterns).
This is a prerequisite for support for interop with C++ template names.
No behavior change here, except that it sadly changes the fingerprinting
for a lot of tests.
Dana Jansens
Geoff Romer
Richard Smith
Jon Ross-Perkins
