Also propagate the pattern IR along with the pattern-match IR, and use
it where appropriate.
Strictly speaking, some parts of the pattern-match IR are allocated
eagerly, while traversing the pattern's parse tree, but they still
aren't actually emitted until we traverse the associated pattern insts.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
A good first-pass, at least. (abstract adapters are rejected with this
change, though pending further language design discussion)
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
The locations point to the first instruction in the generic that needed
the relevant constant value or type.
For now, this must makes the formatted SemIR a bit more useful, but in
the future it will also provide locations for diagnostics caused by
monomorphization failure.
Introduces the `BindingPattern` and `SymbolicBindingPattern` insts, and
a separate stack of pattern blocks that they are emitted into. The
intent is to generate the corresponding pattern-matching insts (like
`BindName`) from them in a separate pass, but that is deferred to future
PRs.
See
[here](https://docs.google.com/document/d/1U_vQH17V893J9aF1LJXUnFYBNSs2MjKl4bJPaWCB2zo/edit?usp=sharing&resourcekey=0-w0xGYZ0An31Kpz-wvzSXwQ)
for the design this is based on, but note that during review we have
chosen to deviate from that design by putting the patterns in separate
blocks, and omitting the "forward references" from a `BindingPattern` to
its corresponding `BindName`. This in turn necessitates having separate
inst kinds for symbolic and non-symbolic binding patterns.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Omit the `note: ` prefix and the snippet from the "in import" note that
precedes a diagnostic.
This makes our diagnostic output more closely match that of Clang and
GCC.
This is a primarily automated change:
- Search & replace for capitalization
-
`(CARBON_DIAGNOSTIC\((?:\n\s+)?\w+,(?:\n\s+)?\s\w+,(?:\n\s+)?\s")([A-Z])`
- `$1\L$2`
- Search & replace for period
-
`(CARBON_DIAGNOSTIC\((?:\n\s+)?\w+,(?:\n\s+)?\s\w+,(?:\n\s+)?\s"(?:[^)]|\n)+)\.("[,)])`
- `$1$2`
- Limited search & replace for `ERROR: ` -> `error: ` in streamed things
- Leaving a TODO for command_line because there's more cleanup that can
be done there
- Modify diagnostic_consumer.cpp
- ERROR -> error
- WARNING -> warning
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Instead of the `call` instruction having a block with one argument per
explicit argument, preceded optionally by `self` and followed optionally
by a return slot, change the `call` to store only the *runtime*
arguments. Store an index on the runtime parameters to make it easier to
determine the correspondence between arguments and parameters in a call.
Compile-time parameters, whether implicit or explicit, are no longer
included in the call argument list. Instead, they're tracked only in the
`specific_id` on the callee.
For calls to generic classes and generic interfaces, it no longer makes
sense to form a `call` instruction, given that the entirety of the
result is determined by the `specific_id`, which is now formed when
checking the call. Instead, the `call` instruction now only models
function calls, and not calls to other kinds of parameterized entity
names, and we create a `class_type` or `interface_type` instead of a
`call` instruction to model these kinds of calls. Notionally the model
here is that we're following the #3720 approach for calls, but for now
we inline the `Call.Op` function when forming SemIR.
We now also track the enclosing specific for a generic class or generic
interface that appears within an enclosing generic. This is necessary in
order for deduction of the inner generic parameters to not get confused
by the outer generic parameters being absent.
In order to not regress diagnostics, the template argument deduction
mechanism has been extended to specify the name of the parameter we're
deducing against when possible, and call arity mismatch errors are now
diagnosed before performing deduction rather than afterwards.
Add these interfaces to the core library. For now, they're two separate
interfaces because we don't yet support one interface extending another.
This collapses a lot of the layering in check: for example, the call
building logic depends on implicit conversions, conversions now depend
on the overloaded operator machinery, and that machinery depends on
building calls.
In passing, improve the diagnostics for failing to find a name required
from the prelude. Also convert all the transitively-called code from
`NodeId` to `LocId` given the latter is what the conversion machinery
has available.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
This implements a few closely related features:
- Starts merging namespaces discovered inside imports.
- Stores results of cross-package name lookup as an entry inside the
scope.
- Note this is particularly visible with `i32`.
- Moves more of the imported instructions to the import scope.
Note this is primarily for executing the namespace TODO in check.cpp,
which is removed here.
`testdata/namespace/merging_with_indirections.carbon` tests key
behavior.
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Instead of reusing instructions from the generic entity in the eval
block, rebuild constants in the same way we rebuild types. The previous
attempt to not rebuild these constants assumed that every constant used
in a generic would be built in that generic, and not referenced directly
or referenced from some enclosing scope, which isn't true in practice
and is a fragile assumption in any case.
We could add back some reuse of instructions from the generic -- if we
happen to see the right instruction to build a constant, we could
opportunistically reuse it -- but given the complexity added by doing
so, I'm not pursuing that here.
Now that the eval block for a generic consists of instructions uniquely
owned by that generic, rather than often being shared with another
entity, include the generic in the formatted SemIR output. I'm using the
same scope name for the generic object itself as for the parameterized
class / function / interface, because there are very frequently
references between them and this keeps the IR simpler and more readable,
and avoids needing to invent a second name for the scope.
Also adds import_ir_scope to namespace formatting. I'd done this as an
aid for #4153, and am splitting it out.
---------
Co-authored-by: Geoff Romer <gromer@google.com>
When evaluating in a generic context, a constant with a symbolic type
might evaluate to a constant with a concrete type (or a more specific
symbolic type). This can't actually happen yet given the current state
of the toolchain, as far as I can determine, so this is more just a
refactoring for now, but will be relied upon by future generics work.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Co-authored-by: Carbon Infra Bot <carbon-external-infra@google.com>
When forming a specific (previously called a generic instance), evaluate
the eval block of the generic to determine the values of any constants
used in that specific. The majority of the work here is updating
eval.cpp so that it can use the results of prior evaluations in the same
block when computing later values.
Include the computed results in the formatted SemIR output.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
For each generic, build a list of instructions describing the
computations we need to do when resolving an instance of the generic:
this is a list of the instance-specific constants and types that the
generic uses. Another way of viewing this list is as a block of Carbon
SemIR code that is evaluated in order to form an instance of the generic
-- this is referenced in the code as the "eval block" for the generic.
For each instruction in the generic whose type or value is a symbolic
constant, replace that type or constant value with a symbolic reference
that says "to find the actual type or value, look at index N in the list
of values for the generic instance".
For an instruction with a symbolic constant value, we can just add that
instruction to our list. For an instruction with a symbolic constant
type, however, we may not have a corresponding instruction computing the
type within the generic and may need to build a new instruction, but
will reuse one where possible. In the case where we build a new
instruction, we use the existing substitution code to build the type
within the eval block.
For now, this transformation is only done in the declaration region of
the generic, not in the definition region. Also, we map back from the
symbolic references to the underlying constant value in a few places
where we will eventually need to do a lookup into a generic instance, in
order to avoid regressing the tests.
This executes on a TODO in AddImportRef to add instructions to their own
block instead of the File block. This has an important consequence of
removing a pattern from InstBlockStack that added to blocks not
currently at the top, cleaning up an issue for ArrayStack. The delta
here is then mostly in different formatting of the import refs, a
consequence of the separation.
By adding an `ImportDecl` instruction, this creates something that can
be referenced through `ImportIRInst`.
packages/no_prelude/implicit_imports_entities.carbon is getting a test
of this (import_conflict and import_conflict_reverse).
Also re-packs ImportIR from 24 bytes to 16 on 64-bit, since I'm touching
everywhere that makes one anyways.
In `ClassType`s and `InterfaceType`s, track a `GenericInstanceId` for
the instance rather than just the argument list.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Build a `Generic` object for generic functions. This object tracks the
generic parameters that are in scope for the generic entity. Eventually
it will track other information about the generic too.
Add basic SemIR formatting support for generic functions.
When constant evaluation produces a known non-symbolic value, treat the
result as a symbolic constant anyway if the type of the value is
symbolic.
We don't yet have many ways to produce a constant that has a known value
but a symbolic type. The added test case is one such way: an array `[T;
0]` initialized from `()` is a symbolic constant only because its type
is symbolic -- we know its value is always `()`. More ways to form such
constants will be appearing soon as we start to support generics: for
example, a method of a generic class has a symbolic type but a known
constant value of `{}`.
When substituting into a symbolic constant, also substitute into its
type.
Merges handle_let.cpp and handle_variable.cpp into a single file in
order to take better advantage of commonalities.
Both still have a bunch of kludges, and there's still divergent handling
in handle_binding_pattern that will yield different results. However,
this fixes some things about `let` like starting to make use of
global_init (imperfectly, due to how VarStorage works, I grant), and in
particular adding `let` names to a name scope, not just lexical lookup.
Don't use the pretty-printed type name, because that's intended for
diagnostics, not for a theoretically machine-readable format like SemIR.
Types are always constants, so omit the leading `constant.` on the type
instruction name.
Don't format the *type of* the function `F` as `"F"`. Instead use
`"<type of F>"`.
Also improve instruction naming for function and generic class name
values: name the value after the function or generic class, and add a
`.type` suffix to the type.
This has is a nice-to-have for me. Frequently I want to run a specific
test, and end up digging through output to be able to copy-paste the run
line. This uses TIP lines to inject the command into the file when using
AUTOUPDATE.
Note, one of the reasons I want this is because "bazel test
//toolchain/testing:file_test --test_output=all" has been regularly
exceeding bazel's output limit for me (workaround is either opening the
output file or specifying an obscure output limit flag), making it a
little harder for me to get the commands. However, frequently I'm adding
a file and want to iterate on it, so that's really the use case I have
in mind here.
Modifies the core package and literal handling to use factory functions
for standard type literals.
Updates function/builtin/import.carbon to stop depending on the prelude,
since it would list all the impls in the core file. Updates
alias/builtins.carbon to be failing (the type values cannot be aliased).
This removes the builtin FunctionType, replacing it with a FunctionType
instruction. The constant for a FunctionDecl is now a StructValue with
type of FunctionType.
Note this means a function declaration produces _both_ a type, and a
value of the type. This has some consequences in terms of circularity,
and makes the importing of function declarations a little more complex.
It'll get particularly peculiar for imports because of the behavior of
the reference, but that's a known issue due to other things such as
`alias`. The impact will hopefully be contained to
ResolvePrevInstForMerge (and ImportRefs).
To note a small formatting change in diagnostics:
```
- // CHECK:STDERR: fail_member_lookup.carbon:[[@LINE+4]]:3: ERROR: Value of type `<associated <function> in Interface>` is not callable.
+ // CHECK:STDERR: fail_member_lookup.carbon:[[@LINE+4]]:3: ERROR: Value of type `<associated F in Interface>` is not callable.
- // CHECK:STDERR: fail_todo_facet_lookup.carbon:[[@LINE+4]]:3: ERROR: Value of type `<associated <function> in Interface>` is not callable.
+ // CHECK:STDERR: fail_todo_facet_lookup.carbon:[[@LINE+4]]:3: ERROR: Value of type `<associated F in Interface>` is not callable.
```
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Change the names for emitted globals for constants with storage to
include both the name of the constant and the name of the use.
This causes the instructions to also be named in SemIR and in LLVM IR
constants.
Adds support for unary `-` and binary `+`, `-`, `*`, `/` for floating
point types.
Real literals are now transformed to `llvm::APFloat`s during the check
phase into the `FloatLiteral` instruction.
This PR likely collides a bit with #3892 and might need to be updated
when that one is merged.
Factor out `SemIR::InstNamer` and also use it when lowering to LLVM IR.
Automatically name all instructions created with our `IRBuilder` based
on the name computed by the `InstNamer`, and likewise name basic blocks
using the label generated by the `InstNamer`.
Move some of the existing naming logic out from lower into `InstNamer`
so that it's also used in SemIR. In particular, we now name call
instructions after their callee, or after the builtin name for calls to
builtins.
Computing and adding these names isn't completely free. This instruction
naming is designed to be optional, so that we can turn it off for builds
where the LLVM IR will only be converted to assembly and won't be seen
by a human, but so far it's enabled unconditionally. We can tune that
later as needed.
Per offline discussion with chandlerc and jonmeow, use different
builtins for signed versus unsigned integer ops instead of looking at
the type. In this commit, the arithmetic builtins (add, sub, negate,
mul, div, mod) are split. I'll apply the same change to comparisons and
to right shift in separate PRs.
Use the complete location of the `as` conversion rather than the
location of the first operand, so diagnostics referring to the result
point at the whole thing.
Move completeness check to the point where the function is defined or
first called. This means we also defer deciding whether the function has
a return slot until that point. Instead of storing a return slot per
function, store the location of the return storage, which may or may not
be used, and compute and store a separate flag saying whether to use it
at the point of first use or definition.
This is the final piece in supporting simple `Make` functions in classes
as a replacement for constructors.
- Adds an empty prelude.carbon file
- Imports that file in any non-Core package file
- Adds --disable-prelude-import to avoid that
- Adds --exclude-dump-file-prefix to be able to hide files from dumping
- Used to hide core files (we can't do this by package name due to lex
dumps, for example)
- Restructures some tests to not rely on `i32`, particularly `alias`
tests (which rely on a name ref) and tests with no prelude.
I'm adding the framework for switching i32 to calling Int32 in the
prelude, but I'm running into a separate error actually switching over.
So that *mostly* works, but isn't quite ready for prime time. However,
maybe the current state of this PR is still useful to review since it
does a lot of the infrastructure work and adds the %Core everywhere?
This is temporary: eventually per the design we should be forming
integer literals whose types reflect their values. But for now we should
ensure that values fit within their types.
This also fixes canonicalization of integer constants and hence of array
types, because we no longer have multiple different representations of
each `i32` value depending on the bit-width used for the literal.
The purpose of the newline is to make it clearer where a given
diagnostic begins and ends, particularly as the first message of a
diagnostic may not be the error.
This is a trivial code change, but ripples edits through test files.
Support is added for all overloaded operator interfaces in the current
design apart from `Assign`, which is going to require some more work to
properly handle, given that primitive assignment currently has a special
implementation for quite a few builtin types.
As we don't have support for generics yet -- in particular, generic
interfaces -- there is no support for `*With` interfaces, but homogenous
interfaces such as `Add` are supported instead.
Factor out building of call expressions so that overloaded operators can
generate calls.
Switch a few places from using specific kinds of NodeId to a general
NodeId. Because overloaded operators and other things like implicit
conversions can result in member access and function calls, those
operations can't require a specific kind of NodeId.
Add import support for associated entities, and fix import support for
interfaces and symbolic bindings. We now import interfaces in two steps,
first importing a forward declaration then a definition, just like we do
for classes. For symbolic bindings, we ensure that each BindSymbolicName
is imported only once, because its ID is used as its symbolic identity.
This is necessary because we (only) support operator interfaces that are
defined in an imported Carbon package for now.
The entire contents of `check/operator.cpp` should probably be
rethought. In particular, doing a lot of name lookups on each operator
is likely to be bad for performance. But this gets us to the point where
overloaded operators are basically working, which seems like a good
place to iterate from.
For now, the tests that the individual operators map to the right
interfaces are mostly generated by a script, but that's just because I'm
expecting a fair bit of churn in how we define the prelude and the
`impl`s -- in particular, when we add support for `AddWith`, we'll need
to update all the tests. The plan is to remove the script once things
settle down.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Co-authored-by: Carbon Infra Bot <carbon-external-infra@google.com>
Previously we used the default inst block formatting, which writes out a
parenthesized list of references, which would always be 'unexpected
instref's because nothing else prints the instructions in the decl
block.
In addition, track the decl block for function declarations like we do
for other kinds of declaration. This means that the parameter
declarations for a function are now properly rendered into the formatted
IR. Note that this adds a lot of verbosity to `function_decl`, but it
does accurately reflect the IR, and we'll probably want this information
to be printed once we start supporting more complex generic function
declarations.
This removes almost all the 'unexpected instref's in our formatted
output. There are remaining cases when a declarative scope contains
multiple blocks, where we only track one of those blocks. That happens
when there is control flow within declarative scopes, and for error
recovery when a class or interface or similar is defined more than once.
As requested in #3730.
By adding a constant to ClassDecl/InterfaceDecl, we're able to remove
name reference special-casing. Use TryEvalInst on the Decl to generate
the Type. For ClassDecl, then use the generated constant for
self_type_id.
`GlobalInit` block is now static block within a `SemIR` which will be
used to emit initialization instructions for variables in the `Package`
scope.
inst_block_stack now has additional methods to handle `GlobalInit` block
separately, this block can be popped without being finalized allowing to
accumulate between all instances of variables.
At the end of the `check` phase, if this block is not empty , the
function `__global_init` will be added with this block being inserted
into it.
This block is pushed to `inst_block_scope` at the end `BindName`,
allowing instruction to be emitted into it, then popped at the semicolon
(VariableDecl).
This significantly changes the `SemIR` output, that's why this commit
updates a lot of the test cases.
To avoid bouncing through `constant_values()` to determine whether a
type is symbolic or template, store the `ConstantId` on the `TypeInfo`
not just the `InstId`.
In addition to propagating the symbolic / template phase, this also
propagates whether a type contains an error, resulting in our no longer
producing types such as `<error>*` -- these now evaluate to simply
`<error>`. While this makes our types less precise after an error, it
also removes some follow-on diagnostics, so it seems to be an
improvement on the whole.
Building on #3636 which handles the general import case, add special
casing for namespaces. Namespaces can be combined cross-IR, so it's a
little more complex.
The implementation adds import_id to the Namespace instruction as a
reference to find the original using the normal structure. This is
achieved by moving the name_id to NameScope to free up space.
---
I considered a few alternatives...
I considered adding import_id to NameScope, but:
1. It's more consistent with things such as Function or Class that
provide name_id on the info object rather than the instruction.
2. I thought it more likely that there would be more NameScope cases
that might want a name_id rather than the import_id, since ImportRef
will typically be used.
I considered putting the import source (cross-ref IR id + inst id) on
the NameScope versus a separate ImportRef, which seems like the
strongest argument towards the NameScope approach because it removes an
instruction. That just felt inconsistent though, and the overhead of
instruction-per-imported-namespace should be low (theoretically few
namespaces should be used). Plus I feel a bit odd adding two
generally-unused ids to NameScope.
A specialized Namespace structure could also have been created to store
the import_id, but that would add an indirection to the NameScope.
Geoff RomerandJon Ross-Perkins
David BlaikieandRichard Smith
josh11bandJosh L
Pablo Paglilla
Gıyaseddin Tanrıkulu