Commit Graph
46 Commits
Author SHA1 Message Date
Jon Ross-Perkins 47e551141f Change the package namespace to use the package name (#6495)
Instead of naming the root namespace `package` (because it's accessed by
the `package` keyword), change it to use the current package name. Note,
buried in the checksum changes,
`toolchain/check/testdata/package_expr/fail_not_found.carbon`:

```
-  // CHECK:STDERR: fail_not_found.carbon:[[@LINE+4]]:16: error: member name `x` not found in `package` [MemberNameNotFoundInInstScope]
+  // CHECK:STDERR: fail_not_found.carbon:[[@LINE+4]]:16: error: member name `x` not found in `Main` [MemberNameNotFoundInInstScope]
```

for:

```
  // CHECK:STDERR:   var y: i32 = package.x;
  // CHECK:STDERR:                ^~~~~~~~~
```

I'll leave it to you if you prefer this; the alternative I see is to
just rename `IsCorePackage` to `IsImportedCorePackage`, and/or change it
to a helper that takes a `Context` and does the right thing with
`parse_tree` (which, I need for `Destroy`-related reasons and was my
default approach).
2025-12-16 01:33:53 +00:00
Dana Jansens fbcaf34494 Defer RequireCompleteType to impl definition (Refactor Impl construction 7/7) (#6470)
Explicitly run `RequireCompleteType` for an impl's facet type constraint
in two places:
- For a new `Impl` declaration that is `extend`
- At the start of the `Impl` definition

Stop trying to RequireCompleteType in the definition when constructing
the witness. If we have a rewrite of a name in `.Self`, then we can
construct a full witness, otherwise we defer to the definition.

Now GetOrAddImpl does not need to track `is_definition` anymore, so we
remove a lot of plumbing.

We inline the `AllocateFacetTypeImplWitness` since it has a single
caller and it is just 2 lines, to help improve understanding of the
steps and comments in setting up the impl definition.

Note that this puts the `RequreCompleteType` instruction into the
definition's generic eval block always, avoiding the issue of ensuring
that each generic redecl has the exact same instructions, and forcing
coordination to have `RequireCompleteType` inserted into every
declaration's eval block or none. The result also more closely matches
the design, with the complete type not being required until inside the
definition.

This is part of #6420 which is being split up into a chain of smaller
PRs. It is based on #6469.
2025-12-11 23:50:10 +00:00
Geoff Romer bf45b1cbf5 Refactor function return type representation (#6463)
This separates the return type from the return pattern, and replaces the
return pattern with a block of return patterns. This is a step toward
support for `ref` returns (where there's no corresponding return
pattern) and compund-form returns (where there may be multiple return
patterns).
2025-12-10 18:34:23 +00:00
Richard Smith 154e4012c4 Include the parent scope when fingerprinting an entity name. (#6473)
This is a prerequisite for support for interop with C++ template names.
No behavior change here, except that it sadly changes the fingerprinting
for a lot of tests.
2025-12-08 15:31:13 +00:00
Jon Ross-Perkins 167b45ca35 Rewrite pending specifics to use the work stack (#6415)
I was trying to figure out the right way to get specifics to be added to
the work.

Technically, we could keep the pending_specific list; this is taking a
different approach of inserting inside the work stack, which will do
extra work moving entries, although typically that should be expected to
be small. One challenge of `pending_specifics` is that if we would need
to shift them to work after both `Done` (for immediate processing) and
`Retry` (for processing after the current instruction is later revisited
and done). That feels kind of awkward as additional tracking to do.
Also, the common case is probably that there's either 0 or 1 specifics
being added, so an additional vector may be significant overhead. That's
why I leaned more in this direction of just inserting them in the vector
of work.
2025-11-24 21:52:29 +00:00
Jon Ross-Perkins 8779b8f64b Replace pending generic logic with work stack-based logic (#6404)
This continues work to eliminate pending generics/specifics and get them
to be interleaved with instruction imports. I'm trying to use
`FinishGenericOrDone` here as a way to help ensure that code correctly
handles generics, where the simple alternative would be for each
`TryResolveTypedInst` call `SetGenericData` directly (but which might
make it easier to call the wrong `ResolveResult` function, and we do
need the `GenericId`s to be passed).
2025-11-20 01:02:18 +00:00
Dana Jansens 5ae5170421 Allow deduction of tuple and struct literals as symbolic generic facet types (#6365)
Give TupleLiteral and StructLiteral a constant value, if their contents
have constant values. Their constant values are TupleValue and
StructValue respectively. This supports their ability to convert to a
constant type (or facet type).

This way when deduce finds a TupleLiteral as the argument to a
_symbolic_ facet type, it can also find a constant value to use for that
argument. This allows deduction to move onto step two, where it can
substitute into the symbolic parameter from previous deduced arguments,
and then perform the conversion from the TupleValue to the desired facet
type.

Allow `PerformBuiltinConversion()` to convert from a canonical
TupleValue or StructValue to `type` instead of only from literals. Then,
also support conversion from a symbolic binding of type TupleType or
StructType to `type`.
2025-11-13 20:17:44 +00:00
Dana JansensandJon Ross-Perkins ff0cea55f6 Add require decls to Interface and NamedConstraint (#6321)
They are not used for impl lookup or verifying anything yet, but now
they appear in the textual semir.

---------

Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
2025-11-11 16:36:15 +00:00
Dana Jansens f272198ce5 Don't elide Self when dumping the interface/constraint (#6297)
We give `Self` in an interface/constraint a location so it's not elided
when trying to dump the interface/constraint. We use the location of the
start of the definition, which is the scope for which the `Self` is
constructed and is available in.
2025-10-30 20:47:16 +00:00
Geoff Romer 0811d996e1 Finish renaming BindName and related insts. (#6281)
Resolves the TODO from #6235
2025-10-28 17:17:38 +00:00
Geoff Romer 09710d102f Separate binding insts for refs and values (#6235)
This resolves a TODO in `expr_info.cpp` by using the inst kind rather
than the bound value to track the binding's category.

Since we're churning all the `bind_name` insts in testdata anyway, I'm
also taking this opportunity to align the inst naming with the design's
terminology, by calling these insts "bindings" (this aspect of the PR is
dependent on #6231 resolving an ambiguity in that terminology). For
consistency we'll need to rename several other insts as well (see the
TODO on `RefBinding`); I'm deferring that to a separate PR to minimize
the review load, but I think those name changes are in-scope for this
review.
2025-10-23 01:46:24 +00:00
Dana Jansens 93b79f159e Change InstId dumping to hex numbers that include the tag (#6175)
This change makes dumping and debugging work again with InstIds that are
now tagged with the CheckIRId. The textual representation of an InstId
is changed from `irN.instM` back to `instM` but the `M` is now a hex
value with the tag as part of it, which is the same number that is
physically in the `InstId::index` field. This prevents any cases where
we would potentially print incorrect values for large InstIds.

We teach the `dump` command in lldb to parse hex values for InstId so
that we can paste these numbers back into the debugger.
2025-10-08 18:45:35 +00:00
Dana Jansens fe020ee08b Make FacetAccessType evaluate to SymbolicBindingType for type-of a BindSymbolicName (#6115)
The SymbolicBindingType refers to the type value that will be
substituted in for the BindSymbolicName, but holds onto the EntityNameId
from the BindSymbolicName instead of (or in addition to, for now) the
instruction.

The EntityNameId will be used to look in the ScopeStack to find the
witnesses either from the BindSymbolicName instruction, or other
instructions that specify `impls` constraints against the EntityName.

This will allow us to have the `T` in `I(T)` resolve to a `.Self`
reference in the type so that we get type equality with the binding's
type: `T:! I(.Self)`.
2025-10-06 18:56:43 +00:00
Jon Ross-Perkins 47081be67a Reduce test sensitivity to small import loc changes (#6145)
Locations are similarly fragile, because adding a comment changes them.
This has made me pause when making prelude changes in #6144, so dropping
them for those cases.

Instruction ids aren't actually that interesting outside debugging, and
can be churny when doing other structural changes. I've seen this in
particular when doing singleton changes, which bump every instruction
id.

Note there are still other ways fragility from locations can crop up.
This shouldn't be considered a complete fix, but hopefully a small
improvement.
2025-09-30 17:20:14 +00:00
Jon Ross-PerkinsandDana Jansens 5e3bb523f8 Add builtin functions for destroy, with special requirements in facet types (#6035)
This is in support of a goal of changing the blanket `destroy` impl to
use (roughly):

```
private fn CanAggregateDestroy() -> type = "type.can_aggregate_destroy";

// Handles aggregate type destruction.
impl forall [AggregateDestroyT:! CanAggregateDestroy()] AggregateDestroyT as Destroy {
  fn Op[addr self: Self*]() = "type.aggregate_destroy";
}
```

That isn't done here because there's still other issues that migrating
raises. What this *does* do is add the builtin functions, and in
particular, support to `FacetTypeInfo` to make `CanAggregateDestroy`
work.

The "special requirement" approach in `FacetTypeInfo` allows us to
support restricting a blanket impl under the current approach of impls.
Maybe we'll find a cleaner approach that can work in the future, but
this fits into the current model by propagating similar to other
requirements. I'm using an enum mask because we have a number of similar
things to add (e.g. copy, move) but I'm not sure we need a full vector.

A few alternatives considered were:

- Supporting syntax more like `where .Self impls
TypeCanAggregateDestroy(.Self, SupportedInterface,
UnsupportedInterface)`. I think it'd be a little cleaner, but requires
better compile-time evaluation in order to assess the type of the call.
Right now it's expected to be a `FacetType` too early to make this work,
and I was concerned about pouring too much more time down this route.
- Providing an actual interface, in particular doing name lookup back
into `Core.` for an interface. This would've added name lookup overhead,
and the question of whether an `impl` exists.
- Generating an interface. This avoids the name lookup, but would still
raise the question of whether an `impl` should also be generated. Work
I've previously done generating interfaces for class destruction also
feels complex to both write and understand (an unfortunate issue).
- Still modeling as an `ImplsConstraint`, for example by defining a
special `InterfaceId::CanAggregateDestroy = -2` similar to what we do on
other ids. I was hesitant because of how this expands the number of
modes of `InterfaceId`, and things for consuming code to watch out for,
for what feels like a relatively niche set of use-cases that are only
interface-like.

---------

Co-authored-by: Dana Jansens <danakj@orodu.net>
2025-09-15 17:03:43 +00:00
Richard Smith e8cd229e74 When performing an impl lookup, only import impls for related interfaces. (#6040)
This avoids impl lookups involving, say, `Core.Int` pulling in all ~65
impls in "prelude/types/int", which resulted in a lot of unnecessary
importing work, followed by a lot of unnecessary inst namer and inst
formatter work.

Before:
```
Ran 1335 tests in 6186 ms wall time, 146818 ms across threads
  Slowest tests:
  - toolchain/check/testdata/interop/cpp/function/arithmetic_types_bridged.carbon: 5611 ms, 5532 ms in Run
  - toolchain/check/testdata/interop/cpp/function/operators.carbon: 2034 ms, 1981 ms in Run
  - toolchain/check/testdata/primitives/import_symbolic.carbon: 1796 ms, 1786 ms in Run
  - toolchain/lower/testdata/operators/arithmetic.carbon: 1729 ms, 1728 ms in Run
  - toolchain/lower/testdata/function/generic/call_recursive_sccs_deep.carbon: 1700 ms, 1697 ms in Run
[==========] 1335 tests from 1 test suite ran. (682 ms total)
```

After:
```
Ran 1335 tests in 2419 ms wall time, 109587 ms across threads
  Slowest tests:
  - toolchain/check/testdata/interop/cpp/function/arithmetic_types_bridged.carbon: 1748 ms, 1665 ms in Run
  - toolchain/check/testdata/interop/cpp/function/operators.carbon: 1106 ms, 1057 ms in Run
  - toolchain/lower/testdata/function/generic/call_recursive_diamond.carbon: 1044 ms, 1041 ms in Run
  - toolchain/lower/testdata/function/generic/call_recursive_sccs_deep.carbon: 1015 ms, 1012 ms in Run
  - toolchain/lower/testdata/operators/arithmetic.carbon: 998 ms, 997 ms in Run
[==========] 1335 tests from 1 test suite ran. (652 ms total)
```

That's still slower than it should be, but a large improvement
nonetheless.

Fixes #6029
2025-09-10 21:40:27 +00:00
Dana Jansens ed43fd2c1c Give the BindSymbolicName for .Self in a binding pattern a FacetType type (#6036)
If it's just `TypeType` then the `BindSymbolicName` appears directly in
type positions, but if it is replaced with another facet value, then we
would need to insert a `FacetAccessType` around it. By giving it a
`FacetType` type, like other `BindSymbolicName`s we make it consistent
and avoid having to introduce extra instructions.
2025-09-10 17:57:08 +00:00
Jon Ross-Perkins 0518fdebbc Fix potential fingerprint conflict in constraints (#6033)
This uses each vector's size as a barrier between lists, to eliminate
the possibility of incidental collisions between entries of different
lists. This is the same as is done inside `AddBlock`.
2025-09-09 21:44:03 +00:00
Richard Smith 2352e93bb5 Remove now-unused StringType instruction. (#5964) 2025-08-20 18:30:11 +00:00
Dana JansensandJon Ross-Perkins 4b0e2b03b6 Add the .Self name for the type expression of a compile time binding (#5937)
We add a virtual node (`CompileTimeBindingPatternStart`) as the first
child of `CompileTimeBindingPattern` which holds the identifier
underneath it, so that it is checked just before the type expression of
the `CompileTimeBindingPattern`. When we reach this virtual node during
check, we add `.Self` as a name in the current scope, and when we reach
`CompileTimeBindingPattern` we remove it from scope, which ensures it's
present during only the checking of the type expression for the compile
time pattern.

At the moment the `.Self` has a different type (it's a `TypeType`) than
other `.Self` in the facet type (which are a single `FacetType`), but
the intention is to immediately substitute it out of the facet type
entirely, replacing it with a reference to the compile time binding (a
`BindSymbolicName`) itself. A TODO has been added for this.

---------

Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
2025-08-12 16:27:07 +00:00
37d5046ceb Support parse/check/lower for char (#5901)
toolchain/check/testdata/builtins/char/basics.carbon and
toolchain/lower/testdata/builtins/char.carbon are probably the most
interesting tests here. The parse tests is required because this adds a
new node kind, and we need coverage of it; but the attached info is
minor. There's a fair amount of test churn here because I'm adding the
Core.Char and Core.CharLiteral types as new singletons.

My intent here is that `CharId` is always a unicode code point, even
when the type is a `Char` and thus must be a single UTF-8 code unit
(single byte). This mainly means the stored value of a `CharValue` can
be printed internally without knowing the type.

---------

Co-authored-by: josh11b <15258583+josh11b@users.noreply.github.com>
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
2025-08-06 20:39:01 +00:00
Jon Ross-Perkins 7ccc1e0144 Expand naming for impls and functions (#5808)
Change impls from `<interface>.impl` to `<self>.as.<interface>.impl`,
and *member* functions to `<parent scope>.<fn>` (non-member functions
exclude their parent scope). Stop special-casing builtin functions,
given the new naming scheme.

The purpose of this is to make it clearer when a member function is
being accessed and, if so, which member function. In particular, we
often access interface `Op` functions. The builtin function
special-casing was intended to help with that, but we still have lots of
`Op` functions. This particular approach should make the interactions
clearer.

This changes up queueing of block IDs a little because, in particular,
we need to process bodies of entities only after constants finish
processing. But, it should also result in less memory usage during
processing because it means we have less on the insts stack at any given
time, since we track a block rather than all instructions contained by
the block.
2025-07-21 18:45:07 +00:00
Jon Ross-PerkinsandGeoff Romer eae3491129 Switch inst namer to queue entities when reached (#5806)
This switches from the `CollectNamesInBlock` approach for entities, to
instead traversing entities as they're encountered. For example, when
traversing constants, when a type is found, the entity will have its
block queued for processing.

This leads to a change in the traversal order, which affects
disambiguation done by numeric sequencing (since that's just showing the
traversal order).

This will allow for simpler "name based on name" logic. This is
something I plan to use for:

- impls: `<type>.as.<interface>.impl`
- functions: `<entity>.<member function>`
  - Note an impl may be used as the entity for a bound function.

By naming the entities as they're encountered, I'll be able to rely on
the generated names rather than recalculating them.

To assist this, I'm also differentiating between the ambiguous and
disambiguated name. Otherwise, we could end up with things like
`<function>.<disambiguator>.<call>.<other disambiguator>`, where the
repeated disambiguator may not be necessary in order to get full
disambiguation. It's also a smaller delta from the current output.

Note, changing `Name` to a class felt appropriate given its shape. I was
also noticing that parts of its API were unused, and the class helps
detect unused private members.

---------

Co-authored-by: Geoff Romer <gromer@google.com>
2025-07-21 17:58:55 +00:00
Jon Ross-Perkins be487bbeda Use declaration locations for formatting entities (#5799)
This is just trying to address the location TODO.
2025-07-14 23:27:03 +00:00
Jon Ross-Perkins 8cd1307711 Include the interface name in impl names (#5798)
i.e., `impl` -> `<interface>.impl`
2025-07-11 19:52:53 +00:00
Dana JansensandJon Ross-Perkins d17188208c Apply min-preludes to more tests (part 7) (#5704)
This drops file_test runtime from about 3s to 2.5s on my machine, which
is now ~30% faster than before #5653 slowed things down by adding a lot
of stuff to the production prelude.

---------

Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
2025-06-24 12:43:08 +00:00
Richard Smith 344f0b7550 Support for heterogeneous operators. (#5653)
Replace the binary `Operation` interfaces with the `OperationWith(T:!
type)` interfaces described in the design, and add a `Result` associated
type for both unary and binary operations. Update the `impl`s in the
prelude for integer types to use the new form, including supporting
implicit conversion of either operand.

I've tried to split this PR up into commits focused on distinct changes
for review convenience. It may be simplest to review it one commit at a
time.
2025-06-13 01:55:24 +00:00
Jon Ross-Perkins 04d534abee Remove the no_prelude directory, using --no-prelude-import directly (#5607)
People seemed receptive [on
#toolchain](https://discord.com/channels/655572317891461132/655578254970716160/1379196447827689553),
so proceeding.

For the two name conflicts, I've set it up so that there's a
"foo.carbon" and "foo_with_prelude.carbon", to indicate that the
no-prelude approach is preferred (with a shorter name).

Note min_prelude will require a little more work/thought, I want to
avoid adding `--custom-core` etc.
2025-06-04 16:56:03 +00:00
Jon Ross-Perkins 3561ab5fae Switch the prelude to using 'export import'. (#3976)
Note, I assume this doesn't affect all the TODOs (like for i32.carbon),
but does cut some things down (and requires updating some tests that
have prelude name conflicts, but I think they were intended to be
updated this way).
2024-05-22 22:55:31 +00:00
Richard Smith 23f9065949 Implement proposal #3927. (#3963)
Change syntax for package declaration to put the `impl` keyword at the
start and remove the `api` keyword.

To support this, rearrange processing of package, library, and import
declarations to use the general modifier handling support in declaration
parsing rather than special-case logic.

There is an ambiguity in `impl package.Foo as Bar`, which we resolve by
treating `package` as an introducer after a modifier only if it's not
followed by `.`.
2024-05-21 00:36:03 +00:00
Richard Smith d5c0c9cfe3 Accept generic parameter lists in class declarations. (#3933)
Check that they match across redeclarations.

Fix some importing bugs for symbolic bindings which were uncovered when
testing this.
2024-05-04 02:08:38 +00:00
Jon Ross-Perkins 92fa0ac1ac Remove ImportRefUsed (#3934)
This was to track use of a declaration after import, prior to a
redeclaration. Per [discussion on
Discord](https://discord.com/channels/655572317891461132/1217182321933815820/1236016521059237962),
we likely don't need this check due to the change in behavior of
`extern`.

Rather than potentially getting one of many `extern` decls and depending
on it by accident, it is now planned to be _required_ to be imported,
and the library doing a non-`extern` decl must _know_ it's importing the
`extern` decl. The stricter requirement on the library means it now
seems more reasonable to use the `extern` decl.

So kind of rolling back #3831, though keeping `ImportIRInstId` (at least
for now) and keeping `Loaded`/`Unloaded` terminology (seems a nicer
fit).
2024-05-03 23:33:42 +00:00
Jon Ross-PerkinsandRichard Smith 76ed3c73cb Promote FunctionType to a standard instruction. (#3931)
This removes the builtin FunctionType, replacing it with a FunctionType
instruction. The constant for a FunctionDecl is now a StructValue with
type of FunctionType.

Note this means a function declaration produces _both_ a type, and a
value of the type. This has some consequences in terms of circularity,
and makes the importing of function declarations a little more complex.

It'll get particularly peculiar for imports because of the behavior of
the reference, but that's a known issue due to other things such as
`alias`. The impact will hopefully be contained to
ResolvePrevInstForMerge (and ImportRefs).

To note a small formatting change in diagnostics:

```
-  // CHECK:STDERR: fail_member_lookup.carbon:[[@LINE+4]]:3: ERROR: Value of type `<associated <function> in Interface>` is not callable.
+  // CHECK:STDERR: fail_member_lookup.carbon:[[@LINE+4]]:3: ERROR: Value of type `<associated F in Interface>` is not callable.

-  // CHECK:STDERR: fail_todo_facet_lookup.carbon:[[@LINE+4]]:3: ERROR: Value of type `<associated <function> in Interface>` is not callable.
+  // CHECK:STDERR: fail_todo_facet_lookup.carbon:[[@LINE+4]]:3: ERROR: Value of type `<associated F in Interface>` is not callable.
```

---------

Co-authored-by: Richard Smith <richard@metafoo.co.uk>
2024-05-03 15:18:04 +00:00
Richard Smith 008d41d7f3 Move instruction names for struct and tuple values from lower to InstNamer. (#3918)
Change the names for emitted globals for constants with storage to
include both the name of the constant and the name of the use.

This causes the instructions to also be named in SemIR and in LLVM IR
constants.
2024-04-26 23:47:08 +00:00
Richard SmithandJon Ross-Perkins 62fe0cd385 Remove the builtin IR, and instead define builtin types locally. (#3910)
We don't need it any more, and removing it simplifies a few things:

- One fewer predefined `File` and reserved ID.
- We now have simply `Builtin` instructions for builtins, instead of
having an `ImportRef` that indirectly references a `Builtin`.
- `ConstantId`s now always refer directly to a local constant, instead
of sometimes referring to an `ImportRef` for a constant in the builtins
IR.

---------

Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
2024-04-24 18:32:59 +00:00
Richard Smith e0b8728263 Allocate de Bruijn levels to symbolic bindings. (#3906)
Use a level comparison during substitution to determine whether we're
substituting a particular binding. Evaluate symbolic bindings with the
same name and the same level to the same symbolic constant, for example
across redeclarations of a generic function.
2024-04-23 16:15:47 +00:00
Jon Ross-Perkins 76a5cf5f50 Fix incorrect application of invalid type on imports. (#3902)
In handle_class and handle_interface we assign TypeType, so is more
consistent. I think this had been missed because we haven't really been
using these declarations (historically, declarations didn't have a
type). It seems not to significantly affect output at present, although
I found this while trying to change merge behavior.
2024-04-22 20:34:27 +00:00
Richard Smith 3776c068de Unify instruction naming between SemIR and LLVM IR (#3898)
Factor out `SemIR::InstNamer` and also use it when lowering to LLVM IR.
Automatically name all instructions created with our `IRBuilder` based
on the name computed by the `InstNamer`, and likewise name basic blocks
using the label generated by the `InstNamer`.

Move some of the existing naming logic out from lower into `InstNamer`
so that it's also used in SemIR. In particular, we now name call
instructions after their callee, or after the builtin name for calls to
builtins.

Computing and adding these names isn't completely free. This instruction
naming is designed to be optional, so that we can turn it off for builds
where the LLVM IR will only be converted to assembly and won't be seen
by a human, but so far it's enabled unconditionally. We can tune that
later as needed.
2024-04-19 02:19:30 +00:00
Richard Smith 5964795f34 Use separate builtins for signed / unsigned arithmetic. (#3892)
Per offline discussion with chandlerc and jonmeow, use different
builtins for signed versus unsigned integer ops instead of looking at
the type. In this commit, the arithmetic builtins (add, sub, negate,
mul, div, mod) are split. I'll apply the same change to comparisons and
to right shift in separate PRs.
2024-04-19 01:42:35 +00:00
Richard Smith 015c7c780c Fix location of converted inst for explicit as conversion. (#3887)
Use the complete location of the `as` conversion rather than the
location of the first operand, so diagnostics referring to the result
point at the whole thing.
2024-04-15 23:22:44 +00:00
Jon Ross-Perkins 895e90e791 Start including the prelude for testing. (#3861)
- Adds an empty prelude.carbon file
- Imports that file in any non-Core package file
  - Adds --disable-prelude-import to avoid that
- Adds --exclude-dump-file-prefix to be able to hide files from dumping
- Used to hide core files (we can't do this by package name due to lex
dumps, for example)
- Restructures some tests to not rely on `i32`, particularly `alias`
tests (which rely on a name ref) and tests with no prelude.

I'm adding the framework for switching i32 to calling Int32 in the
prelude, but I'm running into a separate error actually switching over.
So that *mostly* works, but isn't quite ready for prime time. However,
maybe the current state of this PR is still useful to review since it
does a lot of the infrastructure work and adds the %Core everywhere?
2024-04-07 17:11:42 +00:00
Jon Ross-Perkins 2361830592 Special-case api/impl implicit imports and verify relevant redeclarations. (#3843)
Adds ImportIRId::ApiForImpl to reserve a specific slot for the `api`
import, so that the code can trivially determine whether an import is
from the same library. This is then used for merging function
declarations, because the rules for redeclarations in the same library
slightly differ as compared to other imports (note they're also not
identical to same-file rules).

The main thing this leaves from the recent #3762 is verifying that
entities forward declared in the `impl` file are also defined, but
that's not in-scope for merging; it's moreso post-checking validation.

Note, a lot of our `invalid <entity> ID` comments in ids.h were
incorrectly copy-pasted, so I've cut `<entity>`.
2024-04-04 16:03:41 +00:00
Jon Ross-Perkins f8c8861e5f Change ImportRef to a triple state: Unloaded, Loaded, Used (#3831)
This doesn't significantly change logic, although I'm trying to add the
location to used state.

The issue I'm trying to address is how to identify a declaration as
"allowed to be redeclared". Consider:

```
library "a" api;
extern fn F();
```
```
library "b" api;
extern fn F();
```
```
library "c" api;
import library "a";
import library "b";
var x: auto = F();
fn F();
```

What currently happens is:

1. On import of "a", `F` becomes ImportRefUnused
2. On import of "b", `F` becomes ImportRefUsed in order to merge.
3. In "c", the call `F()` doesn't change the state.
4. In "c", the declaration `fn F();` needs some breadcrumb to understand
whether "F" has been referenced, as in step (3) here.

What I want to happen is:

1. On import of "a", `F` becomes ImportRefUnloaded
2. On import of "b", `F` becomes ImportRefLoaded in order to merge.
3. In "c", the call `F()` causes `F` to become ImportRefUsed
4. In "c", the declaration `fn F();` detects that `F` is already
ImportRefUsed, and can use the associated `used_id` for a diagnostic
about why redeclaring is invalid.

Note this PR isn't implementing (4). I'm focused on the refactoring to
add a new ImportRef state here.
2024-04-02 17:20:09 +00:00
Richard Smith e8cc089b2b Allow simple uses of Self in impls. (#3824)
Per #3714, some of the details here are not yet settled. In particular,
we might want `Self` to come into scope at the start of the definition,
not at the `as` keyword. However, this change allows us to accept the
uncontroversial examples.
2024-03-27 22:52:45 +00:00
Richard Smith 3763d0130a Convert literals to i32 when forming an i32-typed int_literal instruction. (#3814)
This is temporary: eventually per the design we should be forming
integer literals whose types reflect their values. But for now we should
ensure that values fit within their types.

This also fixes canonicalization of integer constants and hence of array
types, because we no longer have multiple different representations of
each `i32` value depending on the bit-width used for the literal.
2024-03-26 19:56:11 +00:00
Richard Smith f0e940ddfd Initial support for builtin functions. (#3803)
For now, a builtin function is defined by specifying a string literal
initializer in a function declaration:

```carbon
fn MyBuiltin(a: i32) -> i32 = "builtin.name";
```

End-to-end support is included for a sample `"int.add"` builtin
performing integer addition, covering constant evaluation and code
generation.

The implementation here needs substantial refactoring before we'll be
ready to start adding more builtins. That refactoring work will be
coming next. This change is aiming to checkpoint some incremental
progress.
2024-03-21 20:46:34 +00:00