This separates the return type from the return pattern, and replaces the
return pattern with a block of return patterns. This is a step toward
support for `ref` returns (where there's no corresponding return
pattern) and compund-form returns (where there may be multiple return
patterns).
Right now, the impl lookup can both fail to resolve the specific
definition because it's symbolic, and return a "final" constant because
it's a `final impl`. This is adding an instruction to help ensure the
specific is resolved.
The constant evaluation is fully recursive, but I'm not adding a TODO
since that's a known issue with impl lookup in general.
Following #6357, map C++ `void` to a prelude class type
`Core.CppCompat.VoidBase`, not to a builtin type. This is mostly just
moving logic around, but does notably change `Cpp.void` from being an
incomplete type to being a complete-but-abstract type.
Also change `NullptrT` to be an adapter for `void*` instead of `()*`, to
follow the approved design.
Implicit conversions to `void` and to `void*` are still absent.
Part of #6280.
- Makes a little more use of `MakeImportedLocIdAndInst` instead of
`UncheckedLoc`
- Requires use of `MakeImportedLocIdAndInst` with `ImportIRInstId`;
previously optional
- Relevant `if constexpr` moves to `AddPlaceholderImportedInst`, but is
more narrowly scoped there.
- Refactors out `AddPlaceholderImportedInstInNoBlock` to reduce how many
spots do an explicit `imports().push_back(...)`
I'd also considered removing `MakeImportedLocIdAndInst` where possible,
but went this route so that changes to the expected parse node wouldn't
affect callers. When it's required, `MakeImportedLocIdAndInst` is always
there; when it's conditionally present, changing `Parse::NodeId` between
enforceable and not-enforceable would require refactoring any callsites
that assumed one or the other.
Completing a pointer type is trivial, but we still need to do it, and
fail to do so in a few places, which can lead to crashes during
lowering. Switch to completing pointer types when the type is created to
avoid the issue.
Adds support to the `dump` debugger command for named constraint ids,
which are printed as `constraint<number>`. While doing so, we print
whether the `constraint` is complete or not, and add the same to
`interface` to match.
And we noticed that the printing of name and name scope ids, which are
not tagged, are very verbose by adding 7 `0`s to them for no reason. So
make the dump output easier to read by dropping 0 prefixes.
Before:
```
name_scope00000000: {inst: inst0000000E, parent_scope: name_scope<none>, has_error: false, extended_scopes: [], names: {name00000000: inst6000000F, name00000001: inst60000011}} {kind: Namespace, arg0: name_scope00000000, arg1: inst<none>, type: type(inst(NamespaceType))} `package`
```
After:
```
name_scope0: {inst: instE, parent_scope: name_scope<none>, has_error: false, extended_scopes: [], names: {name0: inst6000000F, name1: inst60000011}} {kind: Namespace, arg0: name_scope0, arg1: inst<none>, type: type(inst(NamespaceType))} `package`
```
This turns `Cpp` into a keyword, and makes it map to `NameId::Cpp` and
`PackageNameId::Cpp`.
Per discussion with zygoloid, the keyword versus identifier question is
deliberately kept open by #4846. This PR switches to a keyword because
mapping to a specific `PackageNameId` works best with a special `NameId`
not backed by an `IdentifierId`. We could in theory make it work using
`IdentifierId` or a runtime-tracked `PackageNameId` for `Cpp` (e.g.
stored on `SemIR::File`), but this approach is consistent with `Core`
and so seemed like a good starting point.
---------
Co-authored-by: Dana Jansens <danakj@orodu.net>
#6289 absentmindedly added fields in more places, and this is undoing
that plus further fixes.
This does some cleanup of types with relation to singletons. For
`TypeType` and `ErrorInst`, they're always complete due to a
`SetComplete` call in `file.cpp`. For `CppVoidType`, it's intended to be
incomplete by construction, and so a `TypeId` should be okay. The intent
though on not generally providing these had been that `GetSingletonType`
needs to be called to get a type to be marked as complete.
In the case of `AutoType`, removing `TypeId`does change a small printing
detail. I think that's old legacy that's just been carried forward.
Otherwise, for both `InstType` and `AutoType`, I've added
`GetSingletonType` calls where they were used in order to ensure
completeness is applied correctly. These calls cause small SemIR
permutations.
This causes `AutoType` to be seen by lowering, so I'm adding a
placeholder for it. Also merging two functions that look like they're
identical in intent -- not sure why they're separate.
---------
Co-authored-by: Dana Jansens <danakj@orodu.net>
`ImplWitnessTablePlaceholder` is the only non-type singleton instruction
(`ErrorInst` is a type; while `ImplWitnessTablePlaceholder` exposes
`TypeInstId`, it's only used as an `InstId`).
In order to allow simpler handling of singleton instructions, replace
`ImplWitnessTablePlaceholder::TypeInstId` uses with
`InstId::ImplWitnessTablePlaceholder`. Since the placeholder instruction
was never evaluated, this has no significant effect on behavior.
---------
Co-authored-by: Dana Jansens <danakj@orodu.net>
This defines `Cpp.void` as a custom type.
`Cpp.void*` is mapped to C++ `void*`.
Not supported yet: Conversions from and to other pointer types.
C++ Interop Demo:
```carbon
// main.carbon
library "Main";
import Core library "io";
import Cpp inline '''
#include <cstdio>
auto GetPointer() -> void* _Nonnull {
static int x = 8;
return &x;
}
auto GetValue(void* _Nonnull ptr) -> int {
return *static_cast<int*>(ptr);
}
''';
fn Run() -> i32 {
let ptr: Cpp.void* = Cpp.GetPointer();
Core.Print(Cpp.GetValue(ptr));
return 0;
}
```
```shell
$ bazel-bin/toolchain/carbon compile main.carbon
$ bazel-bin/toolchain/carbon link main.o --output=demo
$ ./demo
8
```
Part of #6280.
This resolves a TODO in `expr_info.cpp` by using the inst kind rather
than the bound value to track the binding's category.
Since we're churning all the `bind_name` insts in testdata anyway, I'm
also taking this opportunity to align the inst naming with the design's
terminology, by calling these insts "bindings" (this aspect of the PR is
dependent on #6231 resolving an ambiguity in that terminology). For
consistency we'll need to rename several other insts as well (see the
TODO on `RefBinding`); I'm deferring that to a separate PR to minimize
the review load, but I think those name changes are in-scope for this
review.
This would save space for every `EntityName` that is not an imported C++
global variable.
C++ global variables include static data members.
Created `CppGlobalVarId`, `CppGlobalVarKey` and `CppGlobalVar` to allow
having `CanonicalValueStore` that maps `EntityNameId` (which is in
`CppGlobalVarKey` and `CppGlobalVar`) to `ClangDeclId` (which is also in
`CppGlobalVar`).
This is similar to `ClangDeclId`, `ClangDeclKey` and `ClangDecl` .
This change makes dumping and debugging work again with InstIds that are
now tagged with the CheckIRId. The textual representation of an InstId
is changed from `irN.instM` back to `instM` but the `M` is now a hex
value with the tag as part of it, which is the same number that is
physically in the `InstId::index` field. This prevents any cases where
we would potentially print incorrect values for large InstIds.
We teach the `dump` command in lldb to parse hex values for InstId so
that we can paste these numbers back into the debugger.
Use the `CheckIRId` as a unique identifier for the scope of an `InstId`
- if an `InstId` is created within the scope of one `CheckIRId` it must
not be used in the scope of a different `CheckIRId`.
This is achieved without extra storage, but with false negatives for
large inputs.
When an `InstId` is created, the original index of the `Inst` is XORed
with a tag derived from the `CheckIRId` to produce the final `InstId`.
When the `InstId` is used, the expected tag is XORed with the `InstId`
to get back to the original index - if the tags don't match, the
resulting index will be corrupted, likely too large - resulting in an
out of bounds index CHECK-failure.
(the tag value is derived as such:
* take the CheckIRId
* left shift one bit (padding zero)
* left shift another bit (padding 1 - used to signify that the resulting
`InstId` has a tag combined into it)
* reverse the bits
In this way, the tag is unlikely to overlap with the index for small
test cases - making it possible to separate out the `CheckIRId` from the
index in these cases to provide more meaningful debugging/CHECK
messages, and more informative `SemIR` textual dumping that can now
include the `CheckIRId` along with the `Inst`'s index in the name of an
`inst`)
The test churn here is improved printing as tagged `InstId`s can now,
with best effort (more likely for small test cases where the `CheckIRId`
and the `Inst` index aren't at risk of overlapping from the high and low
bits), render the `CheckIRId` as part of the inst's name. Going from
`instNN` to `irMM.instNN`.
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
The general strategy here is to force use of a thunk when we want to use
default arguments, and have Clang generate uses of the default arguments
on its side of the thunk.
To support this, change the key type used in `clang_decls` from being
just a `Decl*` to being a pair of `Decl*` and number of parameters in
the case of function decls. Import distinct `SemIR::Function`s for each
number of parameters that's used, and corresponding distinct thunks.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>