This removes the filename from the file-scoped block, and places it
above to make it clear where the full SemIR begins (with multifile,
providing a barrier between).
I was suggesting this because `FloatingPoint` is pretty long. `int` and
`float` should be familiar abbreviations. `unsigned` should be familiar
to developers too, but `UnsignedInt` still feels usefully clearer for
the additional chars.
This is an incremental improvement on our diagnostic messages that
simply underlines an entire token if the token is larger than 1 char
(else it points to the single char with a caret like it used to).
Instead of ad-hoc conversion tracking on some kinds of nodes that
conversion creates, consolidate tracking into a single node kind. This
frees up an operand on `Init` instructions that can be used to store the
destination.
Add a `NameId` that is effectively just a wrapper around a `StringId`,
with
some additional predefined values for names that don't correspond to
strings, such as the name of `self` or the function's return slot.
Following up on discussion yesterday regarding this split.
Note, I'm expecting #3341 to do IdentifierId -> NameId in SemIR. It
might be worth adding NameId creation directly to StringStore if you're
content with this setup though.
Advantages:
- Allows lexing/parsing in parallel, since they are modifying fully
separate ValueStores.
- Allows SemIR to reliably be stored hermetically.
Disadvantages:
- Creates overlapping storage of duplicate strings when multiple files
are compiled together.
- Prevents Ids from being uniquely compared cross-file.
Per discussion, the decision is that the advantages are more important.
The looser ownership remains because both SemIR checking and
metaprogramming may still generate things we would want to deduplicate.
It would be somewhat odd if TokenizedBuffer owned something that
checking modified.
I'm looking at this due to the conversation on #3341. Although
diagnostics aren't where they should be, I thought it may help to start
adding raw identifier support (which may also help show how I was
thinking about this).
Note regarding the TODO on how to form the token, `GetTokenText` returns
the `string_id`'s reference value for an `Identifier`. So to make
`GetTokenText` work in a way that returns `r#foo` for a raw identifier,
I think there are a few options:
1. Add additional data indicating the end of the identifier.
2. Add `RawIdentifier` as a token kind to indicate that it's raw and
should be prefixed with `r#` (but also giving later stages one more
token kind to handle)
3. Make the `string_id` correspond to `r#foo`, and have later stages add
`foo` to the strings table whenever `r#foo` is encountered (with map
lookups leading to deduplication).
4. Add `StringId::RawKeyword` special values for each keyword.
- This would mean `self` prints as `self`, `r#self` prints as `r#self`,
but `r#foo` is not a keyword so prints as `foo`.
- This means keywords would need to be listed in a place `StringId` can
depend on them, one way or the other (e.g., a `keywords.def` file in
`base/` should work).
5. Say that it _is_ an `Identifier`, and if it's a keyword spelling, it
must have been a raw identifier.
- Same limitation as above: This would mean `self` prints as `self`,
`r#self` prints as `r#self`, but `r#foo` is not a keyword so prints as
`foo`.
I'm hoping to resolve this issue separately though. :)
For now, we treat class types and `String` as non-copyable, because we
don't know how to emit SemIR to copy them yet. This will change as we
add support for copying those types when appropriate.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Adds a `BoundMethod` SemIR node to represent an `x.F` bound method, with
a new builtin type `BoundMethodType`. Reorganized conversion of call
expression arguments to also check and convert a `self` parameter in the
implicit parameters list.
In passing, improved diagnostics and error recovery for bad call
expressions. We now build a `call` node with the appropriate type and
value category, but with invalid arguments, if the argument conversion
failed, and diagnose calls to non-callable expressions.
`addr self` methods don't work properly yet; the `addr` is ignored for
now.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Provides an adapter for the llvm::yaml API because it otherwise needs a
bunch of const/non-const definitions, and the traits are difficult to
diagnose issues with. The current approach is pretty simple to use, even
if it's not super efficient (which, yaml output is more of a debugging
thing so I'm not really expecting it to be an issue).
Changes the format of yaml output to provide more index information,
just as reminders when seeing something like `node+0`. Note this would
create more churn in deltas if we were reliant on the output yaml in
tests, but we aren't so it should be okay.
This replaces the use of `VarStorage` in this case.
Add an `UnboundFieldType` type as the type of a field, in cases where
it's referenced without an accompanying object.
Add a `BindName` node to describe the name binding performed for both
variables and fields so that we can handle them more uniformly.
This standardizes on having ValueStore and related structures provide
printing, removing the handlers in file.cpp.
The `[]` is provided for empty sequences versus if there was simply
nothing, in which case it would be a sequence when non-empty, and a null
value when empty. Consistently (and explicitly) providing sequences
feels easier to understand.
The changes to the output yaml are overall more terse. My hope is that
this is an improvement for most readers.
Also fixes printing of APInt, defaulting to unsigned for consistency
with Carbon's use.
Building on #3311, change SemIR to use the SharedValueStore. Since this
removes hermeticity, raw output no longer prints ints, reals, and
strings. TokenizedBuffer accessors are modified to return IDs because
values are often passed through in semantics without needing to read
them.
I would've put SharedValueStores on Context, except for the
GetArrayBoundValue convenience method. I felt awkward removing that, so
it's on File, at least for now. That's then used by the formatter and
Lower too. The flipside of this is that TokenizedBuffer has a
SharedValueStores only for printing, so maybe that's similar enough to
what File is doing.
This doesn't start shifting other SemIR members to ValueStore, but that
seems like a next step.
This includes being able to define a class that was previously
forward-declared, and being able to define a member function out-of-line
that was previously declared inside a class.
No support for fields or methods yet, and a class definition doesn't yet
cause the class to be treated as a complete type.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Incomplete types may be nested within other types; for example, a tuple
type might have an incomplete type as an element. Handle such cases by
walking through nested incomplete types when completing a type. This is
done non-recursively in case a very complex type is formed.
Types are generally no longer completed at the point where they're
formed. Instead, we attempt to complete a type when it is used in a
context that requires a complete type, and diagnose if the type cannot
be completed at that point. This will be necessary for classes, which
can become complete after their first use, and helps tease out bugs
where a type completeness check is missing.
Using the computed value representation, fix lowering of struct and
tuple values to use the value representation rather than the object
representation. Fixes an issue found in the review of #3257.
This currently causes us to compute value representations of all types
as they are created, which generates substantially more SemIR to
represent types. We can get some of that back by deferring computation
of the value representation until the type is required to be complete,
but some of the additional cost here will persist with this approach.
I also considered making the computation of the value representation
type be something that lives entirely within the lowering phase, but I
think that's not the right approach in the longer term, because the
value representation will be semantically visible and relevant once we
start allowing it to be customized.
We should consider moving the nodes that exist to compute canonical
non-local types, including value representations, out into a separate
global block. That will clean up the SemIR representation substantially,
and make the SemIR produced for a function not depend on which types we
happen to have encountered beforehand. But that's not being done in this
PR.
---------
Co-authored-by: Chandler Carruth <chandlerc@gmail.com>
Bug found by fuzzing. Problem was untyped SemIR nodes had an invalid
type id, which was retrieved by `HandlePrefixOperator` and then passed
to `context.GetUnqualifiedType`, ultimately performing an invalid access
in `semantics_ir_->GetNode`.
We prefer to make a placeholder type for functions and namespaces to
remove the need for checking for the untyped case everywhere. Eventually
functions will have their own types, but this approach will be needed
for namespaces (and perhaps other non-first-class entities like unbound
methods and interface members) long term.
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Replace `SemIR::Node::GetAsFoo` and `SemIR::Node::Foo::Make` with
`SemIR::Foo` class that represents a particular kind of node, with named
fields.
Rename `SemIR::IntegerLiteral` and `SemIR::RealLiteral` to
`IntegerValue` / `RealValue` to better reflect their purpose and avoid a
name collision with the corresponding `SemIR` node kinds.
Remove `NodeKind::Invalid` and the `SemIR::Node` default constructor
entirely, as they were not used for anything.
Also add `name_reference_untyped` for references to non-first-class
names without types, which currently covers namespaces and functions.
This improves the fidelity of the SemIR representation, and fixes some
issues where we would use the wrong location for nodes and diagnostics
downstream of a name reference.
We're still missing a representation for dotted name expressions, such
as `Namespace.Function`, and we don't use the `untyped` node as an
operand of any other node yet.
Combine the initialization, implicit conversion, and value category
conversion functions into a single function.
This substantially reduces the duplication between these steps, and
ensures that we support the same set of conversions in all these
contexts. This also fixes some issues where we would not use the proper
value representation for tuples and structs after performing implicit
conversions.
This makes the difference between errors and lower-level diagnostics
visible to users, and aligns the toolchain's behavior with the
expectations in `driver_fuzzer.cpp`.
Fix a bug where we would perform the computation of the return location
in SemIR after we have already used it in some cases, leading to
assertion failures during lowering. Instead, accumulate a sequence of
instructions to compute the return location in a temporary block, and
overwrite the return slot with those instructions when we perform
initialization.
StubReference is replaced by a more general SpliceBlock node, that takes
a code block and a result value, executes the instructions in the block,
and produces the result. This is used in the uncommon case where more
than one instruction is required to compute the return slot, which can
happen if we need to first emit a temporary and then index into it, or
if we need to perform multiple levels of indexing before we reach an
entity to initialize.
The speculative insertion of StubReferences after elements in an
argument list turned out to not be necessary, because we decided we want
to insert per-argument initialization steps after all arguments are
evaluated, rather than interleaving them. The StubReferences we insert
are causing some minor code complexity, so remove them.
We still create StubReferences when performing patch-ups of
already-emitted code, but we no longer ever need to look through them
when determining whether an initializer was a literal or when evaluating
a type expression.
This implements initializing expression semantics for structs and
tuples, following #2006 and discussions since.
Tuple and (and analogously, struct) literals are treated as having a
mixed expression category that is later resolved based on how the
literal is used, as either a tuple initializer or a tuple value, at
which point we create a `TupleInit` or `TupleValue` that represents the
formation of the tuple initializer or tuple value from the tuple
literal.
There's quite a lot of TODOs here, and the SemIR representation is still
not quite right, but this seems like a good place to checkpoint some
incremental progress.
- `Peek()` no longer returns a useful value, because we often don't
allocate a `NodeBlockId` until we finish building the block. Remove it
and update both its callers.
- Rename `PeekForAdd()` to `PeekOrAdd()` since it's no longer used to
get a block ID to add elements into.
- `PushForAdd()` was unused. Remove it.
- Add `NodeBlockStack::AddNode` to combine the operations of adding a
node and inserting it into a block.
Instead of modeling array initialization as a thin wrapper around tuple
initialization, handle it like a function call, with a return slot as
part of its input. This better matches how initialization via a call to
`ImplicitAs::Convert` will eventually work, and in particular lets us do
in-place initialization of arrays rather than always creating a
temporary.
`SemIR` now only stores complete blocks, and placeholders for blocks
where we need a block ID before we know the block contents.
This is a preparation step towards the new node block allocation design.
Building on #3214 and #3215, updates sem_ir yaml to be:
```
- filename: name
sem_ir: [ ... ]
```
Also, changes the textual format from `package { ... }` to `file
<filename> { ... }`. My thought on packages there is:
```
file "foo.carbon" {
package MyPackage
...
}
```
The reason for putting the file first is that it's easier if we put what
we're grouping on first, whereas the package is an "annotation" on the
file.
This better reflects the purpose of these semantics nodes, and prepares
for adding TupleValue and TupleInit nodes to represent forming values
and initializers from literals.
Continuing along with #3070. Note this is just a file rename, with BUILD
edits; every file previously in semantics/ should show as moved (except
maybe BUILDs, which split).
Richard Smith
Jon Ross-Perkins
josh11b
Jacob Schneider
Geoff Romer