- Track the `VarPattern` instruction on the `VarStorage` instruction so
that it's available for name mangling.
- Mangle global variables based on the first binding name within their
pattern.
- Give global variables external rather than internal linkage, except if
they have no bindings whatsoever in their pattern.
- To support lowering references to bindings nested within a global var,
such as for `var (x: i32, b: i32)`, add some basic initial support for
reference constant expressions. Treat a global `var` as a reference
constant, and treat an aggregate access into a reference constant as a
reference constant.
I think this would probably have prevented the missed include in #5469
-- it would've just failed completely with a "missing prelude"
diagnostic.
Also note this excludes the included IR from output, because it's
probably low-value to print.
Instead of building an eval block as a separate pass at the end of a
generic, build the eval block incrementally.
The larger change here is that asking for the type or constant value of
an instruction now always returns an unattached type or constant value,
in order to preserve the behavior that we previously achieved by doing
the rewrite to attached types and constant values at the end of handling
the generic.
This also incidentally fixes some subtle issues where attached types and
constant values would leak out into check and cause it to get confused
about differences between attached and unattached values. Check should
no longer see attached values except where it explicitly asks for them.
---------
Co-authored-by: Dana Jansens <danakj@orodu.net>
Don't import `ImplWitnessTable` into the `constants` block, because we
generally don't put `Unique` constants there. This matches the handling
of the other kinds of `Unique` constants. In order to keep the
instruction visible in formatted SemIR, add it to the `imports` block
instead.
Also fix a bug in the instruction formatter that resulted in
instructions in the `imports` block being omitted from the output if
they were only referenced by earlier instructions in the `imports` block
and by instructions in the `constants` block. This was already resulting
in some referenced instructions being omitted from the output, but also
occurred frequently for `impl_witness_table` instructions after this
change because it is common for the only reference to those instructions
to be from `impl_witness` instructions in the `constants` block.
This was originally needed to support constant evaluation of name
expressions, but that's now done in a different way.
This is actually a step toward treating all patterns as constants. The
upcoming change will do so in a slightly different way, and so it will
simplify the review to start from a baseline where patterns are never
constant.
Adds an empty `min_prelude/destroy.carbon` in anticipation of turning it
into an interface. Update `no_prelude` tests to be `min_prelude` and
import it where needed; in some cases, modify the file to remove the
dependency (i.e., rewrite code to have nothing to destruct).
Instead of evaluating a non-parameterized class or interface to a
constant with `SpecificId::None`, use the self specific for that class
or interface, which will not be `None` if there is an enclosing generic.
This allows us to import the table for a given impl only once, while we
can import many ImplWitness instructions with different specifics for a
generic impl.
For example in convert_facet_value_to_narrowed_facet_type.carbon we see
that a single witness table is imported for the BitAnd interface, with
multiple witnesses (for different specifics) imported and sharing the
same table.
The ImplWitnessTable now contains a back-link to the Impl the witness is
for, allowing inst namer to name that interface in the textual semir,
and allowing the interface to be found when debugging from a witness.
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
In preparation for shifting from `TypeId`s potentially representing
attached types to always representing unattached types, using
[terminology suggested on
Discord](https://discord.com/channels/655572317891461132/963846118964350976/1359286326779973712).
This change causes us to track slightly more type spelling information
through SemIR.
One change that has significant impact on the SemIR output is that we
now build a `struct_type` instruction in each class representing the
types of the fields, including the spelling used for those types. This
is now no longer always identical to the corresponding canonical
`struct_type` for the object representation, so it's built separately
and owned by the class.
Also remove `TypeBlock` support entirely, as its only use was
representing `TupleType`s, which now use an `InstBlock`.
Factor out logic to evaluate `EntityNameId` instead of duplicating it
between `BindSymbolicName` and `SymbolicBindingPattern`. Remove support
in `SymbolicBindingPattern` for evaluating a pattern to the constant
value of the corresponding binding, which doesn't really make any sense
given that patterns don't generally evaluate to the value that they
matched.
This results in the handling for `SymbolicBindingPattern` being simply
the default handling for an always-constant instruction, so remove the
special case for it entirely and change its constant kind to `Always`.
It's not entirely clear that it makes sense for `SymbolicBindingPattern`
to be treated as a constant when other patterns aren't, but we seem to
be relying on this in various places, so leave it as a constant for now.
Changing it to never be constant will be a smaller change now -- it just
requires changing the `constant_kind`.
The IR changes in the tests are fairly widespread, but mechanical, and
there are two kinds of things changing:
- `symbolic_binding_pattern`s in specifics now evaluate to
`symbolic_binding_pattern`s, not to the argument values. This means in a
few cases we end up with additional `symbolic_binding_pattern`
constants.
- We evaluate the type operand of `symbolic_binding_pattern` now, so an
error in the type will now properly be propagated into an error in the
pattern's constant value.
When a generic function declaration was encountered for the second or
more time, we would FinishGenericRedecl() for the function decl, but
this just popped the generic region stack and moved on.
The issue with that is when the stack entry is gone, we lose the
symbolic constants from that declaration, and are unable to rewrite them
to point to the actual generic. This left us with a function declaration
with abstract symbolic values that were not useful, and in a function
call we use the declaration attached to the definition, which would be a
declaration with broken symbolic values. Then the function would be
uncallable since deduce would be unable to determine argument types
without the generic bindings.
This resolves the issue for functions, as well as ensuring the correct
generic id from a previous declaration is used for other generic entity
types that have redeclarations.
When a function declaration is qualified, such as defining a class
method outside the class body, we need only the function declaration to
contribute to its generic region stack. The code was collecting constant
values from all qualifier segments together incorrectly.
So when we PushNameQualifierScope(), we also drop the current generic
region stack and rewrite its constant values by calling
FinishGenericRedecl(), and open a new stack entry for the next part of
the qualified declaration.
If a generic declaration somehow has more dependent instruction than a
previous declaration, it would add new instructions to its eval block
with indices beyond the elements in the actual declaration eval block,
since we only store the block from the first declaration found. To avoid
this we plumb through that we are in a redeclaration, and terminate with
an ICE instead of adding new instructions to crash on later.
Fixes#5136.
When converting to a facet there are three different failure modes:
1. You provided a non-type value. Only types can convert to facets. So
we tell you that we found a non-type value.
2. You provided a facet type (which has type TypeType) which does not
have witnesses for the the target facet's type. So we tell you that the
type `T` implements `X` but needs to implement `Y`.
2. You provided a (non-facet-type) concrete type (of type TypeType)
which does not implement the target facet's type (which is a FacetType).
So we tell you that we need the type to implement the FacetType but it
does not.
3. You provided a FacetAccessType (which is of type TypeType also, but
we special case this), whose underlying FacetType is not compatible with
the target facet's type. So we tell you that we need the type to
implement `X` but found a FacetAccessType `T` which implements `Y`.
Closes#5027
This makes inline and out-of-line functions produce the same type.
I was looking at this and wasn't sure if it was deliberate. It seems
desirable to reuse the type when possible, since it's probably cheaper
too.
A query facet type may contain multiple required interfaces, in which
case impl lookup should return an ImplWitness for an impl that is used
for each interface in the query. We bundle these together into an
instruction block and return that from impl lookup. The witnesses are in
the same order as the interfaces in the
`CompleteFacetType::required_interfaces`. This allows walking the
`required_interfaces` to find an interface to give an index that can
also be used to grab a witness from this set, or from FacetValue.
FacetValue now has an InstBlockId for the set of witnesses of the
FacetType, instead of a single ImplWitness instruction id.
FacetAccessWitness includes the index of the witness (determined from
the position in `required_interfaces`) of the witness it's accessing
from the FacetType.
The
toolchain/check/testdata/facet/no_prelude/fail_todo_call_combined_impl_witness.carbon
test demonstrates the fix in the resulting SemIR. We can see the calls
to methods on a multi-interface FacetType result in a FacetAccessWitness
with an index of the correct interface, and this results in a witness
that leads to the correct impl's function.
There is a TODO in member access, where it does not have a
`CompleteFacetType` yet, so it uses the index in
`FacetTypeInfo::impls_constraints` instead, but this can be incorrect in
the presence of named constraints, which when completed can add more
interfaces to the `CompleteFacetType` and which are sorted into an
arbitrary order with the rest there.
---------
Co-authored-by: josh11b <15258583+josh11b@users.noreply.github.com>
During SemIR, when identifying a specific in a specific context, we'd
have to either look through a specific or through a bound method.
Canonicalize which one to look through first, by having the BoundMethod
created around a SpecificFunction instead.
This changes a lot of check tests.
TODO: As the SemIr does not currently allow removal (access to insts()
is intentionally const), the bound instruction created prior to finding
the specific is not removed from the instructions.
Options: (1) leave as is, (2) add a way to remove the previous bound,
(3) rethink how/when the BoundMethod inst is created.
- Explicitly document that `*Param` and `*ParamPattern` insts represent
`Call` parameters.
- Stop wrapping compile-time parameter patterns in `ValueParamPattern`
insts (because they aren't `Call` parameters).
- Document how `MatchContext::results_` relates to the `Call`
parameters, and be more consistent about when it's written to.
- Remove `RuntimeParamIndex::Unknown`: we no longer need to distinguish
"this `Param`'s runtime index is unknown" from "this `Param` isn't a
runtime param", because we no longer use `Param`s at all in the latter
case.
- Rename `RuntimeParamIndex` to `CallParamIndex`.
As a side effect of removing the `ValueParamPattern` insts, this fixes a
minor diagnostic bug where `NoteInitializingParam` didn't identify the
specific parameter that led to a deduction failure, because it expects
generic parameters to only be represented by `SymbolicBindingPattern`s,
but before this change they could be wrapped in `ValueParamPattern`s.
TODO to resolve whether it should conditionally say "object of"
depending on the category
---------
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
For an expression such as `(Type as Interface).AssocFn()`, track the
`Self` type `Type` in the result of the member access so that it's
available when checking the function call.
This introduces a new kind of type, `ImplFunctionType`, that represents
the type of a function that is expected within an impl, modeled as the
type of the function within the interface plus a value to use as `Self`.
Calls to values of this type behave like calls to the underlying
function except that the `Self` parameter is pre-bound to the self type
from the facet.
In order to support this, fix an issue where the imported list of
generic bindings lost their association with their enclosing generic.
This adds a little complexity to `import_ref`, including a new recursive
cycle that I intend to address in a follow-up PR.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
High level, replacing `Id::Invalid` with `Id::None` and `Id::is_valid`
with `Id::has_value` for clarity, as discussed
[here](https://discord.com/channels/655572317891461132/655578254970716160/1331664574545395794).
The `IntId` refactoring is needed together with `AnyIdBase` because it's
also used with `ValueStore`.
Note, trying to be careful not to rewrite `EnumBase::InvalidIndex`, or
`is_valid` in general (e.g., `IdKind::is_valid`).
I've tried to sequence commits here:
1. Automatic replacements:
- `((?:Id|Index)(?: |::|\(|Base(?:\(|::)))Invalid((?:Index)?\W)` ->
`$1None$2`
- `<invalid>` -> `<none>`
- `InvalidNodeId` -> `NoneNodeId`
- `/\*invalid\*/` -> `/*none*/`
- `id((?:_|\(\))(?:\.|->))is_valid` -> `id$1has_value`
2. Manual edits:
- In `int.h` and `int_test.cpp`
- `IntT` has `is_value`, which I'm renaming to `is_embedded_value`.
- Manual edits to comments in this file.
- `AnyIdBase` and `IdBase`
- Declaration of `is_valid` -> `has_value`, `InvalidIndex` ->
`NoneIndex`.
- In `ids.h` and `ids.cpp`
- `is_valid` -> `has_value`
- `// An explicitly invalid ID.` -> `// An ID with no value.`; similar
for index
- Various math on `InvalidIndex` -> `NoneIndex`
- Various mentions of "valid" in comments
- In `value_store.h`, for `IdT::Invalid`, plus one comment
- In `impl.h` and `tokenized_buffer.h`, we had different initialization
of `::None` values (versus `ids.h` syntax) that I fixed manually.
- Spot checks to compile
- Particularly where `is_valid` replacements didn't catch spots due to
different naming.
3. Autoupdate tests
4. verbose.carbon (NOAUTOUPDATE)
5. Comment spot checks
Note there are probably other mentions of "Invalid" that should be swept
up, but I'd like to argue for merging and separating out remaining
cleanup since this is so sweeping (and likely to hit merge conflicts
from churn). We'll probably have lingering mentions of "invalid" for a
bit regardless, just because there are uses of "invalid" in non-Id APIs.
Changes the name of SemIR `import_ref`s to use the format
`<package>.<entity>`.
<table>
<tr><th>Before</th><th>After</th></tr>
<tr>
<td><code>%import_ref.05a: type</code></td>
<td><code>%Main.D: type</code></td>
</tr>
<tr>
<td><code>%import_ref.8f2: <witness></code></td>
<td><code>%Main.import_ref.8f2: <witness></code></td>
</tr>
</table>
* [Discord discussion in
#toolchain](https://discord.com/channels/655572317891461132/655578254970716160/1330253540999827577)
* Closes#4769
This removes some churn when adding new diagnostic cases to test files
(where previous to this change the newly added newline would cause the
previous diagnostic CHECKs to be updated including changes to the line
number because the CHECK for the blank line meant an extra line between
CHECK and source line).
A few alternatives discussed here:
https://discord.com/channels/655572317891461132/655578254970716160/1329573358475673723
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Add a Vtable typed inst with a type_id (of the type this vtable applies
to) and list of virtual function decls (or import refs to function
object constants).
This doesn't add lowering/emission of the vtable, or usage when
initializing objects of the type.
Some questions in case they're interesting to discuss:
* is it right/worth having the type_id in the vtable? (probably makes it
easier to emit - using the type to get the class name to figure out the
mangled name for the vtable) perhaps it should be a ClassId?
* I'm thinking the logic in CheckCompleteClassType could be the place we
handle diagnostics for mismatched keywords (virtual/abstract for a
function that's already virtual/abstract, maybe checking for non-virtual
functions with the same name in a base class, or derived class functions
without `impl`, etc) - but we could move some of that to the moment we
walk the function decl, and record our findings in the function decl
(record the base function it overrides, or the index of the vtable to
slot to use when building the vtable at the end of the class)
* the Vtable typed inst has `constant_kind = InstConstantKind::Always`
and `is_lowered = false`, I think I added that in to workaround/address
some failures in lowering. And seems correct for this intermediate step
- I'll add lowering in a follow-up patch. But the constant_kind - what
should this be? We can just say all vtables are of VtableType (in which
case the `Always` constant kind sounds right to me) or we could have
them introduce a type with each virtual function as a named member,
even?
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
When printing a Class, the complete_type_witness was printed last but
this gave a somewhat misleading representation as it appeared to be part
of the !members label. Move it above the label so that the label more
clearly refers to everything below it.
Include the index rather than the name in the fingerprint of a symbolic
binding. While both the index and the name contribute to the canonical
identity, using either one of them in the fingerprint is sufficient to
ensure that distinct entities get different fingerprints. Changing the
name of a symbolic binding should ideally not result in fingerprint
changes, so exclude the name from the fingerprint when we have an index.
Use the canonical type and constraint when fingerprinting an impl, so
that uses of names in `name_ref` instructions aren't considered, only
the entity the name resolves to, and different ways of spelling the same
type have the same fingerprint. This similarly allows compatible changes
to be made to impls without changing the fingerprint.
Exclude the declaration block when determining the fingerprint of a
declaration. The declaration block contains the declarations of
parameters of the declaration, which do affect whether two declarations
are identical, but not whether they denote the same entity, because it
would be invalid to have different declaration blocks for declarations
with the same name in the same scope. Therefore changes to the
declaration block are compatible, and it's useful for such changes to
not affect the fingerprint.
This is not easy to test in isolation with our current testing
machinery. However, a follow-on PR will change the name of a parameter
in the prelude, and with this in place, will not cause any changes to
occur elsewhere in the toolchain tests.
Use it in the instruction namer to make instruction names more stable
across unrelated changes to the toolchain or the prelude.
---------
Co-authored-by: Dana Jansens <danakj@orodu.net>
* Change `InterfaceWitness` -> `ImplWitness`
* Include a `SpecificId` in the `ImplWitness`. This allows the
`InstBlock` it contains to have its own identity, allowing it to be
changed as the impl is processed. Evaluation only updates the specific.
* Create the `ImplWitness` at the start of the impl definition. In the
future, this will be populated with the values of non-function
associated constants. For now, it starts full of invalid instruction
ids.
* Implements the model suggested in #4672 .
Note that the non-SemIR testdata changes are to these file:
* `toolchain/check/testdata/impl/lookup/fail_todo_undefined_impl.carbon`
* `toolchain/check/testdata/struct/import.carbon`
* `toolchain/check/testdata/tuple/import.carbon`
The last two are due to an import of generics bug exposed by this PR,
which will be fixed in a follow-on.
---------
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Use a deque to maintain the set of instructions to be walked over. so
that the loop can append more instructions (with their related scope)
during iteration without requiring recursion.
---------
Co-authored-by: jonmeow <jperkins@google.com>
Instead of providing operations only for `i32`, provide them for all
`iN` and `uN` types.
For now, this excludes the `*Assign`, `Inc` and `Dec` interfaces,
because the implementations for those are defined as Carbon functions
rather than builtins, and we can't yet lower definitions for specific
functions, so converting those to be generic breaks the build for our
examples.
This is a precondition for enabling the new pattern-matching subsystem
to support binding patterns that have `if` expressions in the type
position.
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Instead of treating `Core.Int` as the toolchain's builtin `IntType`,
model it as a class that adapts the builtin type. This aligns us better
with the intended language model, gives an associated library for
`impl`s involving `Core.Int` to live within, and opens the door adding
member functions to `Core.Int` if we decide that is desirable.
Remarkably it also seems to make the formatted SemIR a little smaller,
because a call to a generic class generates less IR than a call to a
function.
For example, format the `ImplicitAs` interface as `Core.ImplicitAs`
rather than simply `ImplicitAs`.
When importing an entity in a namespace, also import a declaration of
the enclosing namespace if necessary so that we can determine its name.
When a generic requires a symbolic type to be complete, add a new
`require_complete_type` instruction to the generic eval block. During
monomorphization of such an instruction, require that type to be
complete.
Goal is to reduce churn in names in test updates (by churning a lot of
them in this PR).
---------
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
This seems slightly redundant for a locally-defined class, where there
will be a complete_type_witness instruction earlier in the class, but is
important for imported classes, where we're currently doing the wrong
thing in a way that's invisible in formatted SemIR.
The new `FacetValue` instruction represents `C as I` for some type `C`
and facet type `I`. It is named `FacetValue` instead of just `Facet` to
parallel the `FacetType` instruction.
This PR uses this instruction represent the facet value `Self` in an
`impl` declaration. This instruction will be used in the future to also
support things like:
* `C as I` where `C` is a class; and
* forming a specific for a generic with a `T:! I` parameter where `T` is
being given a concrete value.
(Here `I` is an interface or other non-`type` facet type.)
Also do some renaming and add some comments to make things a bit more
clear.
* `FacetTypeAccess` -> `FacetAccessType` to clarify this is not access
of a facet type, but access of the type of a facet
* `.facet_id` -> `.facet_value_inst_id` to parallel the `FacetValue`
instruction
`FacetAccessWitness` will be in a future PR.
---------
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
For the few remaining uses of the builtin `i32` type, manually build an
`IntType(Signed, 32)` value instead. These are:
- The return type of `Run`.
- The type that int literals in an `if` expression are converted into.
- The type of an array index expression.
We should consider converting those three cases away from `i32` over
time.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
When an `IntLiteral` appears as an operand of an `if` expression,
convert it to `i32` for now, so that we don't reject things like `if
cond then 1 else 2` due to having a non-constant value of type
`IntLiteral`.
For tuple indexing expressions such as `(a, b).0`, convert the index to
type `IntLiteral`, not to type `i32`. This isn't strictly necessary to
do in this PR, but avoids the need to provide an `IntLiteral` -> `i32`
implicit conversion for `no_prelude` tests using this syntax.
- Do not include entities imported from files that we are not dumping.
- Do not include constants and import_refs that are not referenced by
something that we are including in the formatted output.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Co-authored-by: Carbon Infra Bot <carbon-external-infra@google.com>
Richard Smith
Jon Ross-Perkins
Geoff Romer
josh11bandJosh L
Alina Sbirlea
Calvin
David Blaikie
Boaz Brickner
