This restructures the import and merge logic to support parameter
patterns in a more scalable way.
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
We were importing all impls as non-final, since we forgot to set the new
field when constructing the imported Impl. Adds a test that fails before
this PR, since the imported Impl is treated as non-final.
With this enabled, entities that live in value stores are poisoned
whenever any action is taken that might invalidate pointers and
references to those options -- in particular, adding another item to
that value store, or attempting to load any entity from an import IR.
Subsequent uses of those pointers or references then trigger an ASan
failure.
This detects latent bugs where the pointer or reference to the entity
would become stale if we got unlucky about when the value store
reallocates, even in cases where the reallocation didn't actually
happen.
This is not enabled by default: it finds a lot of latent bugs, so our
tests don't pass with this option. This PR also includes fixes for a few
of those bugs.
---------
Co-authored-by: Chandler Carruth <chandlerc@gmail.com>
Co-authored-by: Carbon Infra Bot <carbon-external-infra@google.com>
The canonical location of the instruction may be an entirely different
instruction, which the instruction in question was not imported from. In
particular, we shouldn't assume that we can use the constant value of an
instruction that the *location* of an imported instruction refers to as
the constant value of the imported instruction.
The only time we should be looking at the `ImportIRInstId` for a `LocId`
is when determining its location in some other file.
Fixes a crash when importing thunks (which can contain instructions
whose location points to an instruction in a differnt IR).
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Instead of building an eval block as a separate pass at the end of a
generic, build the eval block incrementally.
The larger change here is that asking for the type or constant value of
an instruction now always returns an unattached type or constant value,
in order to preserve the behavior that we previously achieved by doing
the rewrite to attached types and constant values at the end of handling
the generic.
This also incidentally fixes some subtle issues where attached types and
constant values would leak out into check and cause it to get confused
about differences between attached and unattached values. Check should
no longer see attached values except where it explicitly asks for them.
---------
Co-authored-by: Dana Jansens <danakj@orodu.net>
Don't import `ImplWitnessTable` into the `constants` block, because we
generally don't put `Unique` constants there. This matches the handling
of the other kinds of `Unique` constants. In order to keep the
instruction visible in formatted SemIR, add it to the `imports` block
instead.
Also fix a bug in the instruction formatter that resulted in
instructions in the `imports` block being omitted from the output if
they were only referenced by earlier instructions in the `imports` block
and by instructions in the `constants` block. This was already resulting
in some referenced instructions being omitted from the output, but also
occurred frequently for `impl_witness_table` instructions after this
change because it is common for the only reference to those instructions
to be from `impl_witness` instructions in the `constants` block.
Remove calls to `InstStore::GetLocId()` to build a LocId from an InstId
now that they can be constructed directly from the InstId. Most uses of
LocId are just plumbing, so this does not affect them. However places
that want to look inside the LocId do not want to work with the InstId
form. In these places, introduce `InstStore::GetResolvedLocId()` which
converts a LocId (or an InstId as an optimization) into a LocId which is
not backed by an InstId. These locations can be printed (they have a
line and column when they are a NodeId), they can have flags added to
them (`ToImplicit`, `ToTokenOnly`), they can be converted to an
underlying ImportIRInstId, or they may be `None`.
`Dump()` is made to print a resolved location instead of printing the
InstId in the location, since (at least in my experience) the resolved
location is what is interesting in debugging, and this saves manual
`MakeInstId` steps in the debugger every time a location is of interest.
The LocId constructor from InstId is made `explicit` to add clarity to
function calls passing an `inst_id` now directly instead of calling
`context.insts().GetLocId(inst_id)`. To avoid needing to construct
`SemIR::LocId(...)` explicitly in all cases though, the diagnostics code
in Check uses `DiagnosticLocId` as its template parameter which accepts
InstId as well and does the construction of LocId from it.
Because LocId now requires an explicit construction from InstId, any
callers to `AddInst()` functions will have to explicitly convert to
LocId if they had an InstId, but not if they pass a NodeId. To make this
difference clear to callers, we `requires` that the input type can be
converted to LocId. This ensures that passing an InstId results in an
error at the callsite where the InstId is passed, instead of generating
a compiler error when trying to construct `LocIdAndInst` inside
`AddInst()`, which is less clear about what went wrong and doesn't seem
entirely intentional.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
We eliminate the `FacetAccessWitness` instruction, which would sometimes
immediately evaluate to a concrete `ImplWitness`, and sometimes remain
symbolic. This instruction is now replaced by `LookupImplWitness` in all
cases. To support the same use cases, when it is evaluated,
`LookupImplWitness` will look in the self value if it's a facet value,
and attempt to return a concrete `ImplWitness` from it before looking
for an `impl` statement.
The `LookupImplWitness` instruction's value is now canonical, even when
it evaluates to a symbolic `LookupImplWitness` instruction, by
canonicalizing the self value of the lookup query. This canonicalization
unwraps `FacetAccessType` and `FacetValue` instructions to get to an
underlying canonical facet value. However we must preserve and use the
non-canonical query while evaluating the instruction in order to look
for a concrete `ImplWitness` if the query self value was a concrete
`FacetValue`. The canonicalization ensures that symbolic witnesses
obtained from a facet value are compatible with those obtained from an
impl statement, as long as the self types originate from the same
canonical facet value though they may have been narrowed.
Member access now unconditionally does a `LookupImplWitness()`
operation, instead of only sometimes doing the lookup for a final impl
declaration.
`EvalImplLookupResult` is marked `[[nodiscard]]` so that we don't
construct it and forget to return it. This was a mistake made at one
point during the creation of this PR. And the `has_concrete_value()`
method no longer has a precondition that `has_value()` is true, since we
want to look for a concrete result only in the new use of
`EvalImplLookupResult` returned from lookup into the query self facet
value.
The TODO from `FacetAccessWitness` evaluation is addressed by ensuring
the index of the witness in the `FacetValue` comes from the required
interfaces of the `FacetValue`'s type, and that the type (a `FacetType`)
is the same facet type used in the query to construct the `FacetValue`'s
witness block. This is made possible by eliminating the
`FacetAccessWitness` indirection. The lookup into a `FacetValue` happens
while evaluating `LookupImplWitness` and it does so directly on the self
value. This gives a consistent view of the witness set and the facet
type, as they both come from the same instruction.
All of this with 400 less lines of code. :)
---------
Co-authored-by: josh11b <15258583+josh11b@users.noreply.github.com>
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
These constant instructions are all TypeInstId already in their type,
and this makes their names match.
Change the name of MakeSingletonInstId as well and update its comment.
`Add*InstInNoBlock` adds an instruction in the current context,
including adding its type and constant to the current generic eval block
if necessary. This is inappropriate during import, because the current
generic is generally not related to the instructions we're importing.
Previously we worked around this by pushing a placeholder generic onto
the generics stack, but that workaround doesn't interact well with
building generics incrementally. Instead, change the import code to
create instructions directly instead of via `Add*InstInNoBlock`.
This also allows a little simplification, because all the import logic
created imported instruction locations in the same way.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
We frequently want to operate on singletons. Per discussion, drop
`Singleton` to make the code shorter.
This started off as wanting to write `inst_id.is_error()`, but the
dependency relationship between ids.h and singleton_insts.h would
require some kind of delayed evaluation to allow the implementation to
remain in headers (which I suspect is helpful to have for inlining). I
could have added something like `IsErrorInst`, forward declared in ids.h
and defined in singleton_insts.h (which would always be included by
typed_insts.h), but the template approach felt like a decent balance
between (a) removing the boilerplate `::SingletonInstId`, (b)
understandability, (c) still visually mirroring if we immediately return
a singleton, and (d) flexibility for more than just `ErrorInst`. But TBH
I'd probably still have written `is_error()` if it didn't require
addressing the cross-header cycle.
Then I tried `SemIR::InstId::Is<SemIR::ErrorInst>`, which generally
worked with types but generated the complaint that it didn't shorten
*all* singleton uses. So pulling back on `::Is`, and instead just
dropping `Singleton`.
Use TypeInstId in many more places where the instruction is required
to/known to always be a type value. This should be a somewhat exhaustive
set of places, as it covers all instructions given to
GetTypeIdFromTypeInstId().
The things of interest here are:
- Singleton instructions are always of type TypeType, so they are now
TypeInstIds.
- ErrorInst::SingletonInstId gets upcast to be an InstId because it's
sometimes used to define the type of a variable (as in `auto inst_id =
SemIR::ErrorInst::SingletonInstId;` that may hold other InstIds.
- Parse nodes don't really know about TypeInstId, so NodeStack::Push
needs to do some special casing to avoid CHECK failures when given a
TypeInstId but expecting an InstId. We leave a TODO behind here because
the nodes which are being pushed a TypeInstId should probably be taught
to expect that, but such a change is a bit tricky, so too much for this
PR.
This allows us to import the table for a given impl only once, while we
can import many ImplWitness instructions with different specifics for a
generic impl.
For example in convert_facet_value_to_narrowed_facet_type.carbon we see
that a single witness table is imported for the BitAnd interface, with
multiple witnesses (for different specifics) imported and sharing the
same table.
The ImplWitnessTable now contains a back-link to the Impl the witness is
for, allowing inst namer to name that interface in the textual semir,
and allowing the interface to be found when debugging from a witness.
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
After #5280 there are a few more typed instructions that have an `InstId
type_inst_id` that always holds a type value. These are converted to
`TypeInstId` to encode this fact in the type system. The
`ConvertAggregateElement()` function in convert.cpp is now able to
receive `TypeInstId` for a couple arguments as well.
Additionally, the `type_inst_id` field of `StructTypeField` is made into
a `TypeInstId`.
The `TupleType::elements_id` is renamed to `TupleType::type_elements_id`
to try record the fact that it's an InstBlock of type value
instructions. We don't introduce a TypeInstBlockId at this time, but it
might be nice to make blocks of TypeInstIds in the future.
To assist in working with a block of InstId that are type values, two
additional helpers are added to the TypeStore:
- GetBlockAsTypeInstIds which turns an `ArrayRef<InstId>` into a range
of `TypeInstId`
- GetBlockAsTypeIds which turns an `ArrayRef<InstId>` into a range of
`TypeId`
We use these helpers in places that iterate over the
`TupleType::type_elements_id`.
The main goal of this is to collapse the LocId and SemIRLoc types into a
single type, eliminating the need for APIs to decide which to use. This
originated from discussion about UnwrapSemIRLoc in #5169. Although that
was removed in #5202, it's probably still a good direction for LocId.
This changes the packing of LocId to allow adding InstId, making it
tri-modal: ImportIRInstId, InstId, or NodeId. This has a side-effect of
reducing the available space for ImportIRInstId, although not by much
due to the pre-existing `ImplicitBit` behavior. If needed, we could also
probably play with packing a bit more since `ImplicitBit` really only
applies to `NodeId`, but I was trying to keep the logic a little
simpler. Note `TokenOnlyBit` can still apply to `ImportIRInstId`.
This leaves in place a typedef for SemIRLoc -- I intend to clean that up
separately.
Some Discord discussion is
[here](https://discord.com/channels/655572317891461132/655578254970716160/1353755830058745959).
TypeInstId is an InstId whose constant value has a type of TypeType.
This includes:
- Type value instructions, the `ClassType` or `IntLiteralType`
instructions.
- Constraint value instructions, which are the `FacetType` and
`TypeType` instructions, each of which also have type TypeType.
TypeInstId encodes in the type system that it is safe to convert the
instruction's value to a TypeId, and CHECKs at construction that this
invariant is maintained.
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
In preparation for shifting from `TypeId`s potentially representing
attached types to always representing unattached types, using
[terminology suggested on
Discord](https://discord.com/channels/655572317891461132/963846118964350976/1359286326779973712).
This change causes us to track slightly more type spelling information
through SemIR.
One change that has significant impact on the SemIR output is that we
now build a `struct_type` instruction in each class representing the
types of the fields, including the spelling used for those types. This
is now no longer always identical to the corresponding canonical
`struct_type` for the object representation, so it's built separately
and owned by the class.
Also remove `TypeBlock` support entirely, as its only use was
representing `TupleType`s, which now use an `InstBlock`.
This follows the pattern used elsewhere, and allows facet types in eval
blocks to directly reference their operands instead of doing so
indirectly via a `ConstantId` attached to the generic. This prepares us
for making `ConstantId`s always be unattached.
In passing, add a stringified version of the `InstId` to diagnostics in
a couple of places where it seems useful.
This gives a slightly simpler representation for `UnboundElementType`s
in eval blocks, and in principle allows us to preserve the spelling of a
field's type into the `UnboundElementType` and thereby into a field
reference, although as of right now this doesn't affect our diagnostic
output in any way.
During error recovery for a field with a non-concrete type, preserve the
type in the `UnboundElementType` regardless. It's not really problematic
to have a non-concrete type there, and this makes it easier to track the
instruction used to specify the type.
This is a step towards switching symbolic types to always be abstract
during type checking.
Instead of storing a `TypeId` that always refer to a facet type that
always contains exactly a single interface, store the interface
directly.
Also improve stringification of `LookupImplWitness` and witness access
into it, switching to using newly-added functionality for stringifying
specific interfaces.
Each of these types takes another type as an operand. Instead of storing
that other type as a `TypeId`, store it as an `InstId` so that we can
track how it was written, not only its canonical form.
The canonical constant values of these types continue to store the
canonical constant values of their operands, as normal.
---------
Co-authored-by: Dana Jansens <danakj@orodu.net>
Trust that import_ref produces constants that are already in their
evaluated form. We still do one pass over the operands to map them into
their canonical constant values. Even that is mostly unnecessary, but
there are a few instructions produced by importing that still need it
for now.
The instruction does act somewhat like a witness, saying that an impl
does exist for a lookup, but the instruction more concretely represents
an impl lookup - since that is done when it is evaluated.
As of #5087, these terms are no longer synonyms. This change preserves
the original meaning.
---------
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
Add a new instruction called ImplSymbolicWitness which represents a
search for an impl declaration given a self type and an interface to
find implemented for the self type. The self type is stored as a
constant instruction id, rather than as a ConstantId, as instructions
don't currently support holding ConstantId. The interface is stored as a
SpecificInterface but we can't fit all of it directly into the
instruction. So we add a new id to refer to the SpecificInterface as
follows.
Add a new SpecificInterfaceId which indexes into a canonical value store
on SemIR::File. This tracks all `SpecificInterface`s stored in an
instruction - specifically the ImplSymbolicWitness instruction.
The SpecificInterface on Impl is still stored there as a value, not as
an id, and no id is eagerly constructed for it. We wait until an id is
needed to make one. Since they are canonical, a new id is only create
when a new SpecificInterface value is seen.
When doing impl lookup, and the query is not concrete, and the impl is
not effectively final, the query needs to consider future impls that may
specialize either the self type or the constaint to make a more precise
match and replace the found impl declaration. Instead of returning the
ImplWitness instruction from the found impl, we generate a
ImplSymbolicWitness instruction, storing the query so that it can be
replayed later. This instruction is added to the generic eval block and
thus will be re-evaluated later with a SpecificId that may make the
query more concrete. When evaluating the instruction and replaying the
query, the lookup has the same conditions and if it does not decide to
use the found impl concretely, then the same instruction is returned
from eval, leaving it as symbolic.
--- Impl lookup changes ---
Impl lookup gets a little more interesting now. It continues to look in
the facet value for a witness if the self type is a facet value. Then
falls back to looking for an impl declaration. This step is no longer
done directly. Instead, we construct a ImplSymbolicWitness instruction
and evaluate it immediately for each interface that are in the query
facet type.
The ImplSymbolicWitness instruction, when evaluated, calls back to the
impl lookup code, with a query specific interface. There we resume back
into the same code path as from before, finding a witness in an impl
declaration. But we may return "found a non-final impl" instead of a
concrete witness. If eval receives this back, it evaluates to the
current ImplSymbolicWitness instruction as the resulting constant value.
To pass lookup failures back through eval, a result of InstId::None from
the second step of impl lookup will result in a non-constant value,
which is used as a signal back up the stack to the original impl lookup
function that the lookup failed. Using a non-constant value here would
break evaluation of the generic eval block if impl lookup could fail
there, however we know it will not since we only leave behind an
ImplSymbolicWitness instruction in the eval block if we found at least
one matching impl already, and we just want to look for a better match
with a more specific query.
We must take care to not store a reference into any value store across
computation in impl lookup, since impl lookup can recurse into itself
invalidate those stores. That includes the SpecificInterface obtained
from a SpecificInterfaceId, which impl lookup also inserts into the
store.
--- The long tail ---
Adding a new instruction and a new id type requires a myriad of changes
to support them:
We add Dump() support for SpecificInterfaceId. And fix a crash in Dump
for SpecificId::None. We also add MakeSpecificInterfaceId() for dumping
arbitrary ids.
The type of ImplSymbolicWitness is a new singleton builtin type
instruction called WitnessSymbolicType (like WitnessType is the type for
an ImplWitness).
Both ImplSymbolicWitness and WitnessSymbolicType are given `Value` as
their expression category as they are builtin constant values. And
BuildInfo() in TypeCompleter is taught about them both, returning a
`ValueRepr::Copy`.
WitnessSymbolicType is added to the set of SingletonInstKinds, so that
it can have a singleton instrution id as a static member.
Lower's BuildTypeForInst() is taught to make an empty struct for
WitnessSymbolicType, similar to WitnessType.
Instruction formatter (FormatterImpl) grows support for printing a
SpecificInterfaceId so that it can print both arguments of
ImplSymbolicWitness on the RHS when printing the SemIR instruction. To
print a SpecificInterfaceId, it prints both the interface id and the
specific id (if there is one). For example, for a query on a generic
interface `Z` with one parameter, the RHS includes the query, interface,
and specific:
```
%Z.impl_symbolic_witness: <symbolic witness> = impl_symbolic_witness %U, @Z, @Z(%U.as_type) [symbolic]
```
IdKind is extended to include SpecificInterfaceId.
InstFingerprinter is taught to look through SpecificInterfaceId and use
the interface and specific ids in the fingerprint.
InstNamer is taught about SpecificInterfaceId, counting the interfaces
when building an index. It is also tought about ImplSymbolicWitness,
using the name of the interface within and the `.impl_symbolic_witness`
suffix. For example, here the LHS is named after the interface in the
query:
```
%Z.impl_symbolic_witness: <symbolic witness> = impl_symbolic_witness %U, @Z, @Z(%U.as_type) [symbolic]
```
StringifyTypeExpr is taught about WitnessSymbolicType, which uses its IR
name since it's a singleton. And about ImplSymbolicWitness which uses
its constant value. The handling of ImplWitnessAccess also needed to be
adjusted, since it assumed that ImplWitnessAccess::witness_id would
always be a FacetAccessWitness, but it can now also be an
ImplSymbolicWitness. (It seems that the witness_id is also assigned
ImplWitness instructions, but those ImplWitnessAccess instructions don't
ever seem to get stringified in a diagnostic at this time.) At the
moment the ImplWitnessAccess with a symbolic witness is just stringified
as "<symbolic>", such as in:
```
x.carbon:1:2: error: cannot implicitly convert value of type `()` to `<symbolic>` [ConversionFailure]
let a: C(D).(Z.X) = ();
^~
```
There is a TODO left behind to include more information there.
The TypeStructure builder is made to handle WitnessSymbolicType and
WitnessType. These come up now in deduce where a generic impl will have
a ImplSymbolicWitness in a FacetValue for a generic self type. The query
may have a concrete ImplWitness in the same position. Since deduce tries
to deduce through the FacetValue, it tries to convert ImplWitness to
ImplSymbolicWitness, tries to do an impl lookup for `impl ImplWitness as
ImplicitAs(ImplSymbolicWitness)` and causes us to build type structures
with each of these.
Subst is updated to handle pushing and popping SpecificInterfaceId.
Without this, when finishing a generic's eval block, we would walk into
the ImplSymbolicWitness instruction, and its arguments, and fail to
recurse down into the SpecificInterfaceId. Then any specifics inside
would be left as "orphaned" without any generic id attached to them, and
we would never update the instructions in the SpecificInterface's
instructions (inside its own SpecificId) with new constant values when
evaluating the generic eval block against a specific. To do this we push
the specific_id inside the SpecificInterface, and when popping we pop
the specific_id then construct a new canonical SpecificInterface with it
and return that id.
We add support for importing ImplSymbolicWitness by importing its self
constant instruction and specific interface id. However we also had to
add import support for SpecificImplFunction, which can now appear in the
generic eval block for a generic impl declaration, and thus must be
imported with the declaration. This is done very similarly to
SpecificFunction, except the `type_id` is a singleton value.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Adds subset conversion of `NodeIdOneOf` due to the choice usage, plus
the pre-existing TODO. Fixes incorrect information about nodes on
StructLiteral and TupleLiteral.
After this change, `UncheckedLoc` is only used in a couple import
contexts (hard to verify) plus `InstStore::GetWithLocId`.
Move call_params_id from EntityBaseWithParams to FunctionFields.
No visible difference for Function. Since field call_params_id is
function specific fits better in FunctionFields.
This flows out of #5084 and trying to reduce UnsafeMake use. It turns
out imports and namespaces were using unexpected node kinds (previously
ImportIntroducer instead of ImportDecl, for example). This fixes and
adds validation.
I was uncertain about whether to just remove the is_convertible check,
since I don't see it as motivating creation of a conversion between
NodeIdOneOf types. So I've just left a TODO for now.
This required allowing incomplete facet types where previously
completeness was required. Once we support named constraints, we will
need a way to consistently go from an interface to a facet type witness
index without requiring the interface to be complete in these cases.
---------
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
A query facet type may contain multiple required interfaces, in which
case impl lookup should return an ImplWitness for an impl that is used
for each interface in the query. We bundle these together into an
instruction block and return that from impl lookup. The witnesses are in
the same order as the interfaces in the
`CompleteFacetType::required_interfaces`. This allows walking the
`required_interfaces` to find an interface to give an index that can
also be used to grab a witness from this set, or from FacetValue.
FacetValue now has an InstBlockId for the set of witnesses of the
FacetType, instead of a single ImplWitness instruction id.
FacetAccessWitness includes the index of the witness (determined from
the position in `required_interfaces`) of the witness it's accessing
from the FacetType.
The
toolchain/check/testdata/facet/no_prelude/fail_todo_call_combined_impl_witness.carbon
test demonstrates the fix in the resulting SemIR. We can see the calls
to methods on a multi-interface FacetType result in a FacetAccessWitness
with an index of the correct interface, and this results in a witness
that leads to the correct impl's function.
There is a TODO in member access, where it does not have a
`CompleteFacetType` yet, so it uses the index in
`FacetTypeInfo::impls_constraints` instead, but this can be incorrect in
the presence of named constraints, which when completed can add more
interfaces to the `CompleteFacetType` and which are sorted into an
arbitrary order with the rest there.
---------
Co-authored-by: josh11b <15258583+josh11b@users.noreply.github.com>
- Explicitly document that `*Param` and `*ParamPattern` insts represent
`Call` parameters.
- Stop wrapping compile-time parameter patterns in `ValueParamPattern`
insts (because they aren't `Call` parameters).
- Document how `MatchContext::results_` relates to the `Call`
parameters, and be more consistent about when it's written to.
- Remove `RuntimeParamIndex::Unknown`: we no longer need to distinguish
"this `Param`'s runtime index is unknown" from "this `Param` isn't a
runtime param", because we no longer use `Param`s at all in the latter
case.
- Rename `RuntimeParamIndex` to `CallParamIndex`.
As a side effect of removing the `ValueParamPattern` insts, this fixes a
minor diagnostic bug where `NoteInitializingParam` didn't identify the
specific parameter that led to a deduction failure, because it expects
generic parameters to only be represented by `SymbolicBindingPattern`s,
but before this change they could be wrapped in `ValueParamPattern`s.
* Add `RequireCompleteFacetType` and `ResolveFacetTypeImplWitness` to
`check::Context`. Goal was to move code from `impl.cpp` (mostly) without
functional changes.
* Complete type information is cached with the facet type, and is stored
in a `complete_facet_types()` table.
* Main functional change is to diagnose attempts to use a rewrite
constraint on an associated function. Some existing diagnostics have
been updated.
* Remove `check::Context::RequireDefinedType`:
* For class types, use `RequireCompleteType`
* For facet types, use `RequireCompleteFacetType`
* Introduce a `SemIR::SpecificInterface` to hold an interface and
specific id pair.
* Keep the specific interface ids in the impl object.
* Avoid some extra copies in `Dump` functions.
* Future work missing from this PR:
* Resolving for member access or actions that require impl lookup.
* Resolving rewrites constraints that refer to non-concrete values.
* Any support for adding implied constraints that result from a `where`
clause (though TODOs have been added).
---------
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Co-authored-by: Dana Jansens <danakj@orodu.net>
This allows iterating on all values in a store along with the Id for
each value, instead of `llvm::enumerate(store.array_ref())` which would
give you the indices.
While the indices are really the same as the Ids, this provides a
typesafe way to enumerate() over a store.
There's no use for this right now, but I thought I needed this, and it
helped me debug, and it was a pain to write correctly without dangling
references.
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
In order to have the name available for diagnostics, we now always set
`NameId` in `NameContext` and put `poisoning_loc_id` as part of the
union with `resolved_inst_id` instead (since we never need both).
Treat template bindings as introducing template phase, and propagate it
in the same way we propagate the checked generic phase.
Rename "symbolic" to "checked symbolic" to make room for "template
symbolic". Also rename "phase" to "dependence".
This in particular uses free functions because it's likely to end up
more consistent with types (versus a wrapper object for InstStore).
Note, this is unlikely to have a performance impact, but if it does, we
can look into related approaches (and we've already discussed using
LTO).
Renames `PendingBlock::AddInst` to `PendingBlock::Add` because
`MakeElementAccessInst` expects the matching name to exist.
This creates a new check/type.h for most logic, and also moves some
functions to TypeStore in sem_ir/type.h. My approach for TypeStore is to
focus on moving the read-only functions there.
Geoff RomerandRichard Smith
Dana Jansens
Boaz Brickner
Thomas Köppe
Alina Sbirlea