I'm working to make sure remaining diagnostics have coverage, at least
the ones I'd previously added a TODO for. Note in particular that I
couldn't figure out a repro for UnaryOperatorRequiresWhitespace; if you
have one, I can add a test, but otherwise maybe it's actually
unreachable due to being diagnosed through infix logic (or, maybe
this'll let fuzzing tell me an example).
Split StructComma into StructLiteralComma and StructTypeLiteralComma in
order to easily differentiate handling (remains the same in this PR).
Add "Literal" to StructField and StructTypeField because it feels
inconsistent versus the other non-shared things. StructFieldDesignator
remains shared between value literals and type literals.
Note I probably would've made StructFieldDesignator non-shared too, but
that'd require either a lookahead of 2 (to see the separator`) or a
writeback after parsing the separator, neither of which felt especially
crucial for this, when what I'm really trying to do is split type
literal handling a little further.
An invalid parse due to an error token isn't likely a great diagnostic
as it will already have been diagnosed by the lexer. A common case to
start handling that is when the parser encounters an invalid token when
expecting an expression.
This removes a number of unhelpful diagnostics after the lexer has done
a good job diagnosing.
This also means that there may be parse tree errors that aren't
diagnosed when there are lexer-diagnosed errors, so track that.
Follow-up to #4430 that almost finishes addressing its diagnostic TODO.
This refactors the diagnostic kind coverage check into something that
also works for node kinds. Then, since this points out a few node kinds
that aren't having their parse verified, I'm adding minor tests for
those.
Also surround it in square brackets rather than parentheses. This
matches the format used by Clang and GCC, and means diagnostics will
still match the `file:line:col: error: ` pattern used by some IDE tools.
Before:
```console
fail_builtins.carbon:11:11: error(AliasRequiresNameRef): alias initializer must be a name reference
```
After:
```console
fail_builtins.carbon:11:11: error: alias initializer must be a name reference [AliasRequiresNameRef]
```
Also tighten up test regex to only match on `STDERR` lines that list a
file name.
This is to help identify which diagnostics we're actually using.
Note that driver/testdata still has tests which don't pass this flag,
and so continue to test the kind-less (default) behavior.
Omit the `note: ` prefix and the snippet from the "in import" note that
precedes a diagnostic.
This makes our diagnostic output more closely match that of Clang and
GCC.
This is a primarily automated change:
- Search & replace for capitalization
-
`(CARBON_DIAGNOSTIC\((?:\n\s+)?\w+,(?:\n\s+)?\s\w+,(?:\n\s+)?\s")([A-Z])`
- `$1\L$2`
- Search & replace for period
-
`(CARBON_DIAGNOSTIC\((?:\n\s+)?\w+,(?:\n\s+)?\s\w+,(?:\n\s+)?\s"(?:[^)]|\n)+)\.("[,)])`
- `$1$2`
- Limited search & replace for `ERROR: ` -> `error: ` in streamed things
- Leaving a TODO for command_line because there's more cleanup that can
be done there
- Modify diagnostic_consumer.cpp
- ERROR -> error
- WARNING -> warning
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Includes support for the `impls`, `=`, and `==` requirement operators to
the right of a `where`, but `and` to allow multiple requirements is
still a TODO.
---------
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Applies #4278 TEST_NAME substitution to tests. Note I've tried to
structure commits as:
1. Do all the replacements.
2. autoupdate (nothing else) -- this shows incorrect updates.
3. Fix up manually, including autoupdates to get back to original
output.
These appear in `where` clauses, as in:
```
U:! InterfaceB where .C = Vector(.D)
V:! type where Vector(.Self) impls Sortable
```
`.Self` can additionally appear in type expressions in a binding pattern
such as `T:! InterfaceA(.Self)`.
---------
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
This has is a nice-to-have for me. Frequently I want to run a specific
test, and end up digging through output to be able to copy-paste the run
line. This uses TIP lines to inject the command into the file when using
AUTOUPDATE.
Note, one of the reasons I want this is because "bazel test
//toolchain/testing:file_test --test_output=all" has been regularly
exceeding bazel's output limit for me (workaround is either opening the
output file or specifying an obscure output limit flag), making it a
little harder for me to get the commands. However, frequently I'm adding
a file and want to iterate on it, so that's really the use case I have
in mind here.
Parse the name of a declaration as a sequence of `NameQualifier`s --
which have a name, possibly parameters, and a trailing period --
followed by a name and possibly parameters. This prepares us for parsing
declarations of members of generic classes and similar cases, but
actually supporting such member redeclarations is left to a future
change.
We previously required functions to have parameters, but no longer do,
following the direction of #3848. Cases like namespaces that can't
actually have parameters are now diagnosed in check instead of in parse.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Change syntax for package declaration to put the `impl` keyword at the
start and remove the `api` keyword.
To support this, rearrange processing of package, library, and import
declarations to use the general modifier handling support in declaration
parsing rather than special-case logic.
There is an ambiguity in `impl package.Foo as Bar`, which we resolve by
treating `package` as an introducer after a modifier only if it's not
followed by `.`.
This provides `export import` logic in lex, parse, and check; `export
name` logic is only in lex and parse, not check.
I think with `export name` I'm going to need to modify import_ref and
some consolidation logic, whereas `export import` seems feasible to keep
as primarily import logic. Given the implementations were looking like
they'd diverge more substantially, I thought it'd be helpful to cut the
PR here.
When we expect a semicolon, we should be able to provide more standard
recovery.
Note this affects a test of `base`, but it looks like a partial
improvement (the prior line was moving too far). Still, it looks like
recovery isn't handling `{}` quite right. I'm not trying to address that
here though -- leaving a TODO.
The expected parse tree size is validated for valid parse trees, which
is possible even if lex encounters an error. In that case, we were
missing recovery tokens, resulting in a crash. AddToken should be the
only place we call `token_infos_.push_back`.
This is achieving a similar goal as #3849, using placeholders instead of
an ambiguous start node to clarify structure and incrementally simplify
checking. The benefit isn't quite as big here because both paths are
structs, and so checking is more consistent than paren exprs versus
tuples. But I think this removes the only other multi-purpose parse
node.
This uses StructLiteral/StructTypeLiteral naming, reflecting equivalent
SemIR naming. Note, I would lean towards renaming StructLiteral to
StructValueLiteral, but I think consistency in naming takes precedence.
Any renames of StructLiteral might be better in a separate PR.
StructFieldType/StructFieldValue -> StructTypeField/StructField is
trying to making the reading more consistent with
StructTypeLiteral/StructLiteral. SemIR has StructTypeField but not a
value equivalent.
I've been thinking about this since we decided to add placeholders in
the parse tree. This allows a clearer division of work in check
handling, where we were doing work for ExprOpenParen that's only
necessary for tuples (splitting/renaming handle_paren.cpp accordingly).
The purpose of the newline is to make it clearer where a given
diagnostic begins and ends, particularly as the first message of a
diagnostic may not be the error.
This is a trivial code change, but ripples edits through test files.
For now, a builtin function is defined by specifying a string literal
initializer in a function declaration:
```carbon
fn MyBuiltin(a: i32) -> i32 = "builtin.name";
```
End-to-end support is included for a sample `"int.add"` builtin
performing integer addition, covering constant evaluation and code
generation.
The implementation here needs substantial refactoring before we'll be
ready to start adding more builtins. That refactoring work will be
coming next. This change is aiming to checkpoint some incremental
progress.
On the parsing side, we treat `a.(b)` as a member access whose second
operand is a `ParenExpr` rather than a `MemberName`. A new node category
is added for the union of `MemberName` and `ParenExpr` to support this.
Checking is mostly reusing the same pieces we already have for simple
member access. Compound member access is in most ways a simplified form
of simple member access because it doesn't need to do any lookup.
This handles toolchain failures per-file. The intent is to allow placing
both "success" and "fail" tests in the same file, using splits. However,
this PR only adds support and updates existing tests to continue
passing.
This doesn't add full support. I'm separating it out to make the effects
of the modifier changes clearer for review. I'm restructuring a little
with the expectation that we'll have some more categories of modifier
keywords in the future (similar to `extern`, these may not be in a "set"
such as access), and thus easily scaling up to a few more would be
useful.
This undoes parts of #3515 in order to allow PushGlobalInit to be called
when the initializer is called, instead of at the end of the binding
pattern. The current approach is fragile because supported patterns will
become more complex. We also will likely want similar support in `let`,
which puts the initializer first, so this offers a consistent approach
for both.
[Looking
back](https://discord.com/channels/655572317891461132/655578254970716160/1184237511766179840),
this is more or less the second option in that message, but using the
PeekNextIs to avoid vagueness about what's being popped first.
Note I'm putting in PeekNextIs for what I'm hoping will be a pretty
narrow use-case. I could've added depth arguments to the Peek functions,
but that would've rippled through a number of APIs and it's not clear to
me that this has generic utility. I mean, right now it could just be
PeekNextIsVariableInitializer, since it's only optional in that case.
Adds `BindAlias` with a hybrid of `BindName` and `NameRef` semantics. I
think it's slightly closer to `BindName` because it introduces a name,
so I'm going more in that direction. This also matches the need for
`bind_name_id` with imports on enclosing scopes.
Note, only things that look like a name reference are being allowed on
the RHS of `alias`. This includes builtins that look like name
references, such as `bool`, but not ones that turn into values
underneath, such as `false`.
Richard Smith
Jon Ross-Perkins
josh11bandJosh L
Chandler Carruth
Brymer Meneses
CJ Johnson
czapiga