Fixes integer builtins to produce the correct values (and not
CHECK-fail) when used on integer literals. Also adds impls to the
prelude to use the new builtins to perform operations on integer
literals.
Perhaps most importantly, this allows directly initializing `i32` values
with negative numbers, as the negation operation on integer literals now
works.
For testing I've added tests for use of literals with one operator in
each class (addition, multiplication, ordering, bitwise, etc) for which
there are distinct rules or overflow behavior, rather than exhaustively
testing all the combinations. This is aimed at finding a good tradeoff
between maintainability of the tests and thorough test coverage.
Also fixes lowering of heterogeneous shifts and comparisons. These are
currently disabled when one of the operands is an integer literal, but
we may want to allow that when the integer literal operand has a known
constant value.
Non-entry-block allocas will allocate new stack memory each time they're
reached, resulting in leaking stack memory over time for allocas in a
loop. Move all such allocas to the entry block instead, and use an LLVM
intrinsic to mark when the lifetime of the variable actually begins.
Actually presenting two options in this one review - if you look at the
specific
commits in this PR, the first commit represents my first attempt - and
if you
look at the overall PR change for the second attempt.
But I'm totally open to completely different approaches/ideas - these
were just
my rough guesses.
Generate declarations of specific functions on demand. Definitions are
not emitted yet, and I'm using a temporary, known-broken scheme for name
mangling.
This switches `DCHECK` and `FATAL` as well.
The goal is to reduce the code size impact of these assertions so that
we can keep more of them enabled. Currently, the largest cost I see from
`CHECK` is not the actual check or the cold code itself, but actually
the failure to inline trivial functions due to the presence of the cold
code. This means that our goal isn't to reduce apparent code size in the
final binary but the LLVM IR cost assessed for these routines in the
inliner, which closely correlates with code size but is a bit different.
As discussed in #4283, experimentation shows that a single function call
with a minimal number of arguments is the lowest cost model for these.
This is easily achieved with a format-string API that internally uses
`llvm::formatv`. This PR is essentially the `CHECK` version of #4283.
However, the check macros are substantially harder to make work with
both format strings and streaming because they also take a condition.
Also, unexpectedly, I was very successful at devising a regular
expression based automated rewrite from the streaming to the format
string form with only low 10s of manual fixes. This includes compacting
strings broken up across lines, etc. Given how well that went, I've
prepared this PR which just directly switches to the format string API
and migrate everything to use it.
One nice side-effect is that the format string approach ends up greatly
simplifying the implementation here as well.
This is ... *shockingly* effective. Parsing speeds up by more than 3%
with just this change. And checking speeds up by **8%** with this change
alone:
```
BM_CompileAPIFileDenseDecls<Phase::Parse>/256 86.3µs ± 1% 82.9µs ± 1% -3.94% (p=0.000 n=17+19)
BM_CompileAPIFileDenseDecls<Phase::Parse>/1024 431µs ± 1% 415µs ± 1% -3.76% (p=0.000 n=18+19)
BM_CompileAPIFileDenseDecls<Phase::Parse>/4096 1.77ms ± 1% 1.71ms ± 1% -3.18% (p=0.000 n=18+19)
BM_CompileAPIFileDenseDecls<Phase::Parse>/16384 7.44ms ± 1% 7.17ms ± 2% -3.56% (p=0.000 n=18+20)
BM_CompileAPIFileDenseDecls<Phase::Parse>/65536 30.7ms ± 1% 29.7ms ± 1% -3.15% (p=0.000 n=18+20)
BM_CompileAPIFileDenseDecls<Phase::Parse>/262144 131ms ± 1% 127ms ± 1% -2.81% (p=0.000 n=18+18)
BM_CompileAPIFileDenseDecls<Phase::Check>/256 878µs ± 2% 800µs ± 1% -8.91% (p=0.000 n=19+20)
BM_CompileAPIFileDenseDecls<Phase::Check>/1024 1.88ms ± 2% 1.72ms ± 1% -8.56% (p=0.000 n=19+20)
BM_CompileAPIFileDenseDecls<Phase::Check>/4096 5.78ms ± 2% 5.28ms ± 1% -8.70% (p=0.000 n=20+18)
BM_CompileAPIFileDenseDecls<Phase::Check>/16384 21.9ms ± 1% 20.1ms ± 1% -8.02% (p=0.000 n=18+20)
BM_CompileAPIFileDenseDecls<Phase::Check>/65536 90.4ms ± 2% 83.1ms ± 1% -8.04% (p=0.000 n=19+20)
BM_CompileAPIFileDenseDecls<Phase::Check>/262144 381ms ± 2% 352ms ± 1% -7.79% (p=0.000 n=19+19)
```
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Co-authored-by: josh11b <15258583+josh11b@users.noreply.github.com>
Seems to work with lldb ( https://pastebin.com/igKkNECm ), though gdb
has /some/ trouble with the paths (they aren't complete - just using the
filename directly, not providing the working directory - might be some
quick hacks that can help there).
Renames Lower::Handle* to Lower::LowerFunctionInst. This allows writing
a templated handler for instructions, moving code out of the macro
expansion and removing some of the redundancy in things like
`HandleAddrOf(..., SemIR::AddrOf inst)`
This adds `DefinitionInfo` for `Define`-based configuration so that
parameters are optional. It also makes it easier to provide the
equivalent functions on both `Definition` and `Define`.
A common pattern used here is to change from a `switch` with in-line
`case`s to instead have `case`s that call an overloaded function. What's
happening here is that the instruction type is used to select an
overload, and if an overload is not defined, a compiler error would
result. Meanwhile, clusters of overloads are being defined using
`requires`-based templating, so that equivalent implementations are not
copied. This addresses a limitation of a vanilla `switch` approach where
it's hard to have redundant cases using conditional logic, while also
getting compiler errors when adding new `InstKind` entries, which had
been a significant part of why we used macros previously.
This starts hitting some odd clang-format edge cases causing
`CARBON_KIND_SWITCH(inst){` (missing space), which I haven't seen
before. Adding `CARBON_KIND_SWITCH` to .clang-format works around it.
This works to leverage the capabilities of the hashtable as much as
possible, for example using the key context in the value stores.
However, there may still be opportunities to refactor more deeply and
use the functionality even better. Hopefully this is at least
a reasonable start and gets us a clean baseline.
On an Arm M1, this is a 15% improvement on my large lexing stress test,
but ends up a wash on my x86-64 server. This is a smaller benefit than
I expected, and it's because we're using a set-of-IDs and looking up
values with a key context for things like identifiers. This pattern has
a surprising tradeoff. The new hashtable uses significantly less memory,
a 10% peak RSS reduction just from the hashtable change. But indirecting
through the vector of values makes growing the hashtable dramatically
less cache-friendly: it causes growth to randomly access every key when
rehashing. On x86, everything gained by the faster hashtable is lost in
even slower growth. And even on Arm, this eats into the benefits.
But I have a plan to tweak how identifiers specifically work to avoid
most of the growth, and so I suspect this is the right tradeoff on the
whole. It gives us significant working set size reduction and we can
likely avoid the regressed operation (growth with rehash) in most cases
by clever reserving and if necessary by adding a hash caching layer to
the table infrastructure.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Make constant emission non-recursive, and stop building a bogus
FunctionContext to emit constants.
To support this, move `InstConstantKind` from the typed instruction
definition into the `.def` file, and add more macros to allow us to
generate case labels based on whether an instruction is a constant.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Co-authored-by: Carbon Infra Bot <carbon-external-infra@google.com>
First steps towards using constant values in lowering.
For now, we reuse the regular instruction lowering to lower constants.
This mostly works, because we don't actually need an `llvm::Function` or
a current basic block when lowering a constant most of the time.
However, a special case is needed for lowering aggregate value constants
because they would otherwise create a stack alloca to store the
constant. Separate constant lowering code will be added in a future
change to clean this up.
When lowering a constant initializing expression, the result is a value
of the destination type, rather than code to initialize the destination,
so a separate copy step is required when finishing initialization from a
constant for a type that uses in-place initialization. Handling this
required extending `ReturnExpr` to track its destination location.
We currently often create non-constant `*_access` SemIR instructions
that are only used by constant `*_init` instructions. These cause
lowering to leave behind `getelementptr` instructions in the lowered IR
that are now unused. It should be possible to detect this case and avoid
producing these instructions, or to produce them lazily, but for now
we're just leaving them around for LLVM to clean up.
Factor out `SemIR::InstNamer` and also use it when lowering to LLVM IR.
Automatically name all instructions created with our `IRBuilder` based
on the name computed by the `InstNamer`, and likewise name basic blocks
using the label generated by the `InstNamer`.
Move some of the existing naming logic out from lower into `InstNamer`
so that it's also used in SemIR. In particular, we now name call
instructions after their callee, or after the builtin name for calls to
builtins.
Computing and adding these names isn't completely free. This instruction
naming is designed to be optional, so that we can turn it off for builds
where the LLVM IR will only be converted to assembly and won't be seen
by a human, but so far it's enabled unconditionally. We can tune that
later as needed.
Similar to #3705, we actually have a mix of `Make` and `Create` in
factory functions too, so this PR is normalizing on `Make`. It's
intended to be consistent with the naming choice for Carbon factory
functions.
Note, MakeSyntheticBlock is the only one I feel a little weird about
because llvm's own APIs use Create, and this is essentially wrapping
LLVM calls. But the flipside is it also feels like a vague line to draw,
when we also differ from LLVM coding style in other ways.
This is a bit of a cleanup; I probably should've just renamed CrossRef
instead of adding ImportRefUsed.
Adding `is_builtin` to InstId is more about providing a standard API for
the check, which I expect to add a little more of.
Shifts import tests to validate that the BuildValueRepr CHECK isn't
accidentally hit.
These are manual fixes; mostly from clang-tidy, some from clangd (which
notes unused includes).
In typed_insts, adding inlline due to misc-definitions-in-headers. Per
discussion, clang-tidy is wrong, but inline silences it.
For parameter name skew in definition versus declaration, I'm just using
the name from the definition.
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Instead of ad-hoc conversion tracking on some kinds of nodes that
conversion creates, consolidate tracking into a single node kind. This
frees up an operand on `Init` instructions that can be used to store the
destination.
Adds a `BoundMethod` SemIR node to represent an `x.F` bound method, with
a new builtin type `BoundMethodType`. Reorganized conversion of call
expression arguments to also check and convert a `self` parameter in the
implicit parameters list.
In passing, improved diagnostics and error recovery for bad call
expressions. We now build a `call` node with the appropriate type and
value category, but with invalid arguments, if the argument conversion
failed, and diagnose calls to non-callable expressions.
`addr self` methods don't work properly yet; the `addr` is ignored for
now.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
1. In general, `semantics_ir` -> `sem_ir`, to match the directory name.
2. For the list of `ValueStore`-related accessors on `SemIR::File`, add
them to `check`'s `Context` object, shortening access.
Finishing what #3316 started, add more bespoke ValueStore-like
structures to File. With this, the things which previously had somewhat
boilerplate Add/Get functions are now all on side classes, giving a
uniform style of API for calling.
Note, I was on the fence about making things public on ValueStore. If
it's preferred that I make some things there protected I certainly can,
there's just a trade-off that may mean more distinct child/wrapper
types.
This is a prerequisite for class support, where a class can be
referenced as a type before it becomes complete. For example, given:
```carbon
class A {
fn F(a: A);
class B {}
var b: B;
}
fn A.F(a: A) {}
```
we need to lower `B` before we lower `A`, even though `A` is used as a
type first.
This will also start catching some cases where we don't require a type
to be complete despite using it, as we now only lower types that are
required to be complete.
Remove the poison values for struct and tuple literals. We don't need
those any more, because we never generate references to those literals
as values, and we don't have a type to use for them because we never
require the type of a literal to be complete, only the type of the
entity initialized by the literal, which can be different, for example
when initializing an array from a tuple literal or a class from a struct
literal.
This doesn't affect the output: `llvm::Type` objects that are not
referenced by an LLVM module don't affect the IR for that module, and
the order in which `llvm::Type`s are created doesn't affect anything
either.
Replace `SemIR::Node::GetAsFoo` and `SemIR::Node::Foo::Make` with
`SemIR::Foo` class that represents a particular kind of node, with named
fields.
Rename `SemIR::IntegerLiteral` and `SemIR::RealLiteral` to
`IntegerValue` / `RealValue` to better reflect their purpose and avoid a
name collision with the corresponding `SemIR` node kinds.
Remove `NodeKind::Invalid` and the `SemIR::Node` default constructor
entirely, as they were not used for anything.
Trust semantics to have put them in the right places.
Many parts of lowering still need to be updated to use the value
representation chosen at the semantics layer, but this is an incremental
step towards that.
Fix a bug where we would perform the computation of the return location
in SemIR after we have already used it in some cases, leading to
assertion failures during lowering. Instead, accumulate a sequence of
instructions to compute the return location in a temporary block, and
overwrite the return slot with those instructions when we perform
initialization.
StubReference is replaced by a more general SpliceBlock node, that takes
a code block and a result value, executes the instructions in the block,
and produces the result. This is used in the uncommon case where more
than one instruction is required to compute the return slot, which can
happen if we need to first emit a temporary and then index into it, or
if we need to perform multiple levels of indexing before we reach an
entity to initialize.
Continuing along with #3070. Note this is just a file rename, with BUILD
edits; every file previously in semantics/ should show as moved (except
maybe BUILDs, which split).
Richard Smith
David Blaikie
Jon Ross-Perkins
Geoff RomerandRichard Smith
R B
Danial Klimkin
josh11b