Fixes integer builtins to produce the correct values (and not
CHECK-fail) when used on integer literals. Also adds impls to the
prelude to use the new builtins to perform operations on integer
literals.
Perhaps most importantly, this allows directly initializing `i32` values
with negative numbers, as the negation operation on integer literals now
works.
For testing I've added tests for use of literals with one operator in
each class (addition, multiplication, ordering, bitwise, etc) for which
there are distinct rules or overflow behavior, rather than exhaustively
testing all the combinations. This is aimed at finding a good tradeoff
between maintainability of the tests and thorough test coverage.
Also fixes lowering of heterogeneous shifts and comparisons. These are
currently disabled when one of the operands is an integer literal, but
we may want to allow that when the integer literal operand has a known
constant value.
We previously generated a `value_bind` instruction of the wrong type,
resulting in lowering building bad LLVM IR.
Also fix another issue exposed by this change, where we would import
constants without marking their types as complete, and then crash in
lowering while trying to lower them. This happens in particular for the
`FunctionType`s of functions in `ImplDecl`s. Address this by skipping
lowering for constants with incomplete types.
Generate declarations of specific functions on demand. Definitions are
not emitted yet, and I'm using a temporary, known-broken scheme for name
mangling.
This switches `DCHECK` and `FATAL` as well.
The goal is to reduce the code size impact of these assertions so that
we can keep more of them enabled. Currently, the largest cost I see from
`CHECK` is not the actual check or the cold code itself, but actually
the failure to inline trivial functions due to the presence of the cold
code. This means that our goal isn't to reduce apparent code size in the
final binary but the LLVM IR cost assessed for these routines in the
inliner, which closely correlates with code size but is a bit different.
As discussed in #4283, experimentation shows that a single function call
with a minimal number of arguments is the lowest cost model for these.
This is easily achieved with a format-string API that internally uses
`llvm::formatv`. This PR is essentially the `CHECK` version of #4283.
However, the check macros are substantially harder to make work with
both format strings and streaming because they also take a condition.
Also, unexpectedly, I was very successful at devising a regular
expression based automated rewrite from the streaming to the format
string form with only low 10s of manual fixes. This includes compacting
strings broken up across lines, etc. Given how well that went, I've
prepared this PR which just directly switches to the format string API
and migrate everything to use it.
One nice side-effect is that the format string approach ends up greatly
simplifying the implementation here as well.
This is ... *shockingly* effective. Parsing speeds up by more than 3%
with just this change. And checking speeds up by **8%** with this change
alone:
```
BM_CompileAPIFileDenseDecls<Phase::Parse>/256 86.3µs ± 1% 82.9µs ± 1% -3.94% (p=0.000 n=17+19)
BM_CompileAPIFileDenseDecls<Phase::Parse>/1024 431µs ± 1% 415µs ± 1% -3.76% (p=0.000 n=18+19)
BM_CompileAPIFileDenseDecls<Phase::Parse>/4096 1.77ms ± 1% 1.71ms ± 1% -3.18% (p=0.000 n=18+19)
BM_CompileAPIFileDenseDecls<Phase::Parse>/16384 7.44ms ± 1% 7.17ms ± 2% -3.56% (p=0.000 n=18+20)
BM_CompileAPIFileDenseDecls<Phase::Parse>/65536 30.7ms ± 1% 29.7ms ± 1% -3.15% (p=0.000 n=18+20)
BM_CompileAPIFileDenseDecls<Phase::Parse>/262144 131ms ± 1% 127ms ± 1% -2.81% (p=0.000 n=18+18)
BM_CompileAPIFileDenseDecls<Phase::Check>/256 878µs ± 2% 800µs ± 1% -8.91% (p=0.000 n=19+20)
BM_CompileAPIFileDenseDecls<Phase::Check>/1024 1.88ms ± 2% 1.72ms ± 1% -8.56% (p=0.000 n=19+20)
BM_CompileAPIFileDenseDecls<Phase::Check>/4096 5.78ms ± 2% 5.28ms ± 1% -8.70% (p=0.000 n=20+18)
BM_CompileAPIFileDenseDecls<Phase::Check>/16384 21.9ms ± 1% 20.1ms ± 1% -8.02% (p=0.000 n=18+20)
BM_CompileAPIFileDenseDecls<Phase::Check>/65536 90.4ms ± 2% 83.1ms ± 1% -8.04% (p=0.000 n=19+20)
BM_CompileAPIFileDenseDecls<Phase::Check>/262144 381ms ± 2% 352ms ± 1% -7.79% (p=0.000 n=19+19)
```
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Co-authored-by: josh11b <15258583+josh11b@users.noreply.github.com>
Mainly, changes the default from -1 to 0 in DiagnosticLoc, still trying
to keep reusing that. Nothing except for the lowered output is affected,
so I think this is fine.
Also, have lowering consistently call GetDiagnosticLoc.
Pulls in one of the CHECKs suggested from #4251
Co-authored-by: David Blaikie <dblaikie@gmail.com>
Seems to work with lldb ( https://pastebin.com/igKkNECm ), though gdb
has /some/ trouble with the paths (they aren't complete - just using the
filename directly, not providing the working directory - might be some
quick hacks that can help there).
Refactors a bunch of the SemIRDiagnosticConverter to be able to use that
from Lower to access source locations there to use in debug info.
I assume some of this is a bit jank/would need to be fixed/improved in
the future - like the context functor that's passed into ConvertLoc?
(not totally clear what that's for/what the debug info will be missing
out on in its absence, I could throw a FIXME in there if you like)
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Still doesn't have line tables, so of limited value (at least now
this'll be enough that LLVM really generates debug info into the
resulting object file (whereas with only the compilation unit metadata,
LLVM will consider it empty and avoid emitting any of it)) - but another
step along the path.
This also doesn't attach the right source location to the functions -
I'll do that in a follow-up change because I think it'll require the
majority of the refactoring between driver and check to extract the
essential functionality sem_ir_diagnostic_converter, I think, to allow
retrieving source locations during lowering.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
This adds just the debug info metadata for Compilation Units (the top
level container of debug info) - but without anything in them, LLVM
won't emit them at all, so while this is testable at the IR level, it
isn't observable at the object level until more debug info is added.
A couple of starting points in this patch:
* A flag (`--debug-info`, seems to match the naming/style of other flags
in the carbon driver, though this is different from the naming
conventions of clang/gcc) that enables debug info when lowering. Open to
other names/approaches (on by default? historically debug info's been to
large/expensive to do this, so sticking with that precedent for now).
* Enabling that flag by default in the lowering tests - I do find the
churn on golden tests a bit rough, and adding more features to all the
tests means more churn, but it seems consistent with the approach so far
- keep an eye on this and perhaps revisit this if the churn gets too
annoying
---------
Co-authored-by: Carbon Infra Bot <carbon-external-infra@google.com>
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
This better follows the principle that types are simply constants of
type `type`, and allows more uniform treatment of types as just another
kind of constant from generics handling.
Use a hash table to map from `TypeId` to information about the complete
type. This makes basic operations on types a bit simpler, and operations
that actually need to access the complete class information a bit more
complex.
This adds `DefinitionInfo` for `Define`-based configuration so that
parameters are optional. It also makes it easier to provide the
equivalent functions on both `Definition` and `Define`.
A common pattern used here is to change from a `switch` with in-line
`case`s to instead have `case`s that call an overloaded function. What's
happening here is that the instruction type is used to select an
overload, and if an overload is not defined, a compiler error would
result. Meanwhile, clusters of overloads are being defined using
`requires`-based templating, so that equivalent implementations are not
copied. This addresses a limitation of a vanilla `switch` approach where
it's hard to have redundant cases using conditional logic, while also
getting compiler errors when adding new `InstKind` entries, which had
been a significant part of why we used macros previously.
This starts hitting some odd clang-format edge cases causing
`CARBON_KIND_SWITCH(inst){` (missing space), which I haven't seen
before. Adding `CARBON_KIND_SWITCH` to .clang-format works around it.
Make constant emission non-recursive, and stop building a bogus
FunctionContext to emit constants.
To support this, move `InstConstantKind` from the typed instruction
definition into the `.def` file, and add more macros to allow us to
generate case labels based on whether an instruction is a constant.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Co-authored-by: Carbon Infra Bot <carbon-external-infra@google.com>
Factor out `SemIR::InstNamer` and also use it when lowering to LLVM IR.
Automatically name all instructions created with our `IRBuilder` based
on the name computed by the `InstNamer`, and likewise name basic blocks
using the label generated by the `InstNamer`.
Move some of the existing naming logic out from lower into `InstNamer`
so that it's also used in SemIR. In particular, we now name call
instructions after their callee, or after the builtin name for calls to
builtins.
Computing and adding these names isn't completely free. This instruction
naming is designed to be optional, so that we can turn it off for builds
where the LLVM IR will only be converted to assembly and won't be seen
by a human, but so far it's enabled unconditionally. We can tune that
later as needed.
For now, a builtin function is defined by specifying a string literal
initializer in a function declaration:
```carbon
fn MyBuiltin(a: i32) -> i32 = "builtin.name";
```
End-to-end support is included for a sample `"int.add"` builtin
performing integer addition, covering constant evaluation and code
generation.
The implementation here needs substantial refactoring before we'll be
ready to start adding more builtins. That refactoring work will be
coming next. This change is aiming to checkpoint some incremental
progress.
This required adding a few headers that were found transitively before,
but not too many. This is sadly a fairly manual process of opening every
file in my IDE, but I think I got everything in `//common` and
`//toolchain`.
There are a few cases where technically we don't need `foo.h` to be
included into `foo.cpp`, but I've forced those to stay with a pragma.
I've tried to catch the places where we can cut deps in Bazel as well,
but not sure I got all of those.
I had been noticing these in other PRs and it seemed better to isolate
the change.
Instead of ad-hoc conversion tracking on some kinds of nodes that
conversion creates, consolidate tracking into a single node kind. This
frees up an operand on `Init` instructions that can be used to store the
destination.
1. In general, `semantics_ir` -> `sem_ir`, to match the directory name.
2. For the list of `ValueStore`-related accessors on `SemIR::File`, add
them to `check`'s `Context` object, shortening access.
This is a prerequisite for class support, where a class can be
referenced as a type before it becomes complete. For example, given:
```carbon
class A {
fn F(a: A);
class B {}
var b: B;
}
fn A.F(a: A) {}
```
we need to lower `B` before we lower `A`, even though `A` is used as a
type first.
This will also start catching some cases where we don't require a type
to be complete despite using it, as we now only lower types that are
required to be complete.
Remove the poison values for struct and tuple literals. We don't need
those any more, because we never generate references to those literals
as values, and we don't have a type to use for them because we never
require the type of a literal to be complete, only the type of the
entity initialized by the literal, which can be different, for example
when initializing an array from a tuple literal or a class from a struct
literal.
This doesn't affect the output: `llvm::Type` objects that are not
referenced by an LLVM module don't affect the IR for that module, and
the order in which `llvm::Type`s are created doesn't affect anything
either.
Continuing along with #3070. Note this is just a file rename, with BUILD
edits; every file previously in semantics/ should show as moved (except
maybe BUILDs, which split).
Richard Smith
Jon Ross-PerkinsandDavid Blaikie
R B
josh11b