The InstId in this field is to an instruction that declares the
function, rather than the function itself, so that diagnostics can print
where the function is coming from. The type of the function (the
FunctionType instruction) is the type (the type_id) of the
function_decl_id. So we rename the field to help make this distinction
more clear.
Followup to #4739
Add a builtin `"int.convert"` supporting unchecked conversions between
different integer types. This performs a truncation, zero-extension, or
sign-extension, depending on the widths of the operands and the
signedness of the source type. Add explicit `As` support to the prelude.
No implicit conversions are supported yet as we don't have a way to
express the constraint that we can only implicitly convert to wider
types.
* Change `InterfaceWitness` -> `ImplWitness`
* Include a `SpecificId` in the `ImplWitness`. This allows the
`InstBlock` it contains to have its own identity, allowing it to be
changed as the impl is processed. Evaluation only updates the specific.
* Create the `ImplWitness` at the start of the impl definition. In the
future, this will be populated with the values of non-function
associated constants. For now, it starts full of invalid instruction
ids.
* Implements the model suggested in #4672 .
Note that the non-SemIR testdata changes are to these file:
* `toolchain/check/testdata/impl/lookup/fail_todo_undefined_impl.carbon`
* `toolchain/check/testdata/struct/import.carbon`
* `toolchain/check/testdata/tuple/import.carbon`
The last two are due to an import of generics bug exposed by this PR,
which will be fixed in a follow-on.
---------
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Fixes integer builtins to produce the correct values (and not
CHECK-fail) when used on integer literals. Also adds impls to the
prelude to use the new builtins to perform operations on integer
literals.
Perhaps most importantly, this allows directly initializing `i32` values
with negative numbers, as the negation operation on integer literals now
works.
For testing I've added tests for use of literals with one operator in
each class (addition, multiplication, ordering, bitwise, etc) for which
there are distinct rules or overflow behavior, rather than exhaustively
testing all the combinations. This is aimed at finding a good tradeoff
between maintainability of the tests and thorough test coverage.
Also fixes lowering of heterogeneous shifts and comparisons. These are
currently disabled when one of the operands is an integer literal, but
we may want to allow that when the integer literal operand has a known
constant value.
Make `int.snegate` ignore the signedness of its operand and
unconditionally check for signed overflow like all the other `int.s*`
builtins do. Fix the prelude implementation of unary `-` for `Core.UInt`
to use `int.unegate` instead of `int.snegate`.
Fix the test for unsigned negate to actually test negating unsigned
integers, and add some tests that unary `-` also works.
In order to support these examples, this adds two new builtins to the
toolchain: `print.char` and `read.char`, which map to the libc functions
`putchar` and `getchar`.
Instead of treating `Core.Int` as the toolchain's builtin `IntType`,
model it as a class that adapts the builtin type. This aligns us better
with the intended language model, gives an associated library for
`impl`s involving `Core.Int` to live within, and opens the door adding
member functions to `Core.Int` if we decide that is desirable.
Remarkably it also seems to make the formatted SemIR a little smaller,
because a call to a generic class generates less IR than a call to a
function.
Also fix a bug in `Context::GetClassType` that previously tried to
complete the class type before returning it. That's not correct --
`GetCompleteTypeImpl` is only appropriate for cases where the type can
trivially be completed and completing it can't fail -- and led to
infinite recursion with this change because we would call `GetClassType`
when producing a diagnostic if completing that class type failed.
When a generic requires a symbolic type to be complete, add a new
`require_complete_type` instruction to the generic eval block. During
monomorphization of such an instruction, require that type to be
complete.
This fixes a crash in lowering, at least (though only initializes the
vptr to
null for now) - certainly open to naming feedback on the instruction, or
the
exact semantics (we could have a global vptr instruction that's
referenced from
the existing instructions for reading globals, for instance).
I guess we'll want one type parameter for the vptr_init instruction,
which is
the type that this is a vptr for? (can do that here or in a follow-on
patch)
`ids.h` and `ids.cpp` are the manual edits, everything else is
search-and-replace.
The full list of things moved is:
- `TypeId::TypeType`
- `TypeId::AutoType`
- `TypeId::Error`
- `ConstantId::Error`
This is to unblock removing `InstId::Builtin*`.
* Rewrite constraints are stored in a facet type, substituted, imported,
and formatted.
* We now distinguish `.Self` from other symbolic bindings in two ways:
* `.Self` itself now has an invalid compile time binding index (since it
doesn't bind to any of the generic parameters). As a result, we no
longer need to create a generic region in `handle_where.cpp`.
* There is a new phase tracking values that are only symbolic because
they transitively depend on `.Self`. This allows us to give the result
of a `where` expression template phase as long as it doesn't use any
symbolic constants other than `.Self` or other designators.
* `AddConstant` has been removed from `check/context` since it was only
used from `eval`. This meant less plumbing of the phase change.
* Evaluation of `BindSymbolicName` now also performs substitution into
its type.
* Include a bit more information in some diagnostics.
* `StringifyTypeExpr` outputs rewrites, which required adding support
for associated entities as well.
* Associated entities now have an entity name set when importing.
* Adds tests for some interesting cases with rewrites and uses of
`.Self` mixed with other symbolic constants.
Still to do:
* There is no validation that any particular type satisfies rewrite
constraints.
* Access to members of a facet type do not see the rewritten values.
* Impls don't recognize whether associated constants have rewrites
setting their values.
* No support for resolving facet types.
---------
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Represent the type as an `InstId` rather than as a `TypeId` to preserve
how it was written and better support tracking its value in a generic.
Add accessors to `Class` to get the base and adapted type to reduce code
duplication, and add `TypeStore::GetObjectRepr` to make it easier to map
from a type to its possibly-adapted object representation type. In
passing, also move `GetIntTypeInfo` and `GetUnqualifiedType` into
`TypeStore`.
This fixes specifics of generic adapters to properly look at the
specific adapted type, and also fixes importing of adapters.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Adds `FacetAccessWitness` instruction and uses it in `member_access.cpp`
to support accessing members of facets. Still to do: interface witness
access is producing runtime values when it should produce symbolic
values.
---------
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
The new `FacetValue` instruction represents `C as I` for some type `C`
and facet type `I`. It is named `FacetValue` instead of just `Facet` to
parallel the `FacetType` instruction.
This PR uses this instruction represent the facet value `Self` in an
`impl` declaration. This instruction will be used in the future to also
support things like:
* `C as I` where `C` is a class; and
* forming a specific for a generic with a `T:! I` parameter where `T` is
being given a concrete value.
(Here `I` is an interface or other non-`type` facet type.)
Also do some renaming and add some comments to make things a bit more
clear.
* `FacetTypeAccess` -> `FacetAccessType` to clarify this is not access
of a facet type, but access of the type of a facet
* `.facet_id` -> `.facet_value_inst_id` to parallel the `FacetValue`
instruction
`FacetAccessWitness` will be in a future PR.
---------
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Adds per-builtin instructions, removing `BuiltinInst`. This collapses
`builtin_inst_kind.def` into `inst_kind.def` so that we have a single
place for all macro uses. I still want to remove `BuiltinInstKind`, but
it's something I think is better separated from the `BuiltinInst`
removal.
I'm collapsing the build targets `ids` and `inst_kind` into one because
they both have links to builtin kind information now. It's hard to
separate without a cycle. I'm using the `typed_insts` name because that
seems like the actual most significant thing there, and more interesting
relative to the `inst` target.
This is for more clearly distinct names, and to make it a clearer
transition from `BuiltinInst` for name conflicts. `FloatType` is also an
instruction, and we have `Carbon::Error` (common/error.h). This avoids
affecting tests, although the name is embedded in the builtin test.
In `LegacyFloatType`, `Legacy` because I was having trouble coming up
with a more appropriate name. I'm not clear this is a `FloatLiteralType`
at present, it needs some work to mirror `IntLiteralType`.
In `ErrorInst`, the suffix `Inst` was discussed as good and similar to
`BuiltinInst` (although I'm trying to get rid of that).
For the few remaining uses of the builtin `i32` type, manually build an
`IntType(Signed, 32)` value instead. These are:
- The return type of `Run`.
- The type that int literals in an `if` expression are converted into.
- The type of an array index expression.
We should consider converting those three cases away from `i32` over
time.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
In preparation for changing integer literals to be of `IntLiteral` type.
Conversions from the integer literal type are only permitted when the
value fits within the destination type.
For now, if conversion cannot be checked because the source value is a
symbolic constant, produce a symbolic constant representing the
conversion rather than rejecting it.
As a prerequisite for switching the type of int literals to be the
`IntLiteral` type, add support for performing conversions of in-bounds
integer constant values to other integer types in which they fit.
This incidentally is our first compile-time-only builtin function, so
add very minimal support for compile-time-only functions while we're
here.
The first change here is to canonicalize away bit width when tracking
integers in our shared value store. This lets us have a more definitive
model of "what is the mathematical value". It also frees us to use more
efficient bit widths when available, such as bits inside the ID itself.
For canonicalizing, we try to minimize the width adjustments and
maximize the use of the SSO in APInt, and so we never shrink belowe
64-bits and grow in multiples of the word bit width in the
implementation. We also canonicalize to the signed 2s compliment
representation so we can represent negative numbers in an intuitive way.
The canonicalizing requires getting the bit width out of the type and
adjusting to it within the toolchain when doing any kind of math, and
this PR updates various places to do that, as well as adding some
convenience APIs to assist.
Then we take advantage of the canonical form and embed small integers
into the ID itself rather than allocating storage for them and
referencing them with an index. This is especially helpful for the
pervasive small integers such as the sizes of types, arrays, etc. Those
no longer require indirection at all. Various short-cut APIs to take
advantage of this have also been added.
This PR improves lexing by about 5% when there are lots of `i32` types.
---------
Co-authored-by: Dana Jansens <danakj@orodu.net>
Co-authored-by: Carbon Infra Bot <carbon-external-infra@google.com>
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
This does a few things:
* Replaces the single `TypeId` in the `FacetTypeInfo` struct with a
vector of `InterfaceId`, `SpecificId` pairs (sorted in id order)
representing the set of interface requirements of the facet type. This
will later be used to support facet types with multiple interface
requirements (as in `I & J` or `I where .Self impls J`).
* Replace `InterfaceType` instructions (used as the type of an
`InterfaceDecl` instruction) with `FacetType` instructions (introduced
in #4460) with a (newly introduced) `FacetTypeFromInterface()` function.
* Replace code that consumed `InterfaceType` values with code that
consumed `FaceType` values. I've generally left the assumption in the
code that it is dealing with a single interface, using the (newly
introduced) `FacetTypeInfo::TryAsSingleInterface`, and producing an
error otherwise. There isn't yet support for the `&` operator or `where
.Self impls`, so this is generally a good assumption for now, except you
can get a facet type with no associated interfaces from a `type
where`... expression. In some cases, the facet type value is pulled from
the evaluation of an `InterfaceDecl` instruction, where the single
interface assumption will hold permanently.
* Some related cleans up: nicer stringification and formatting of facet
types, suppression of some errors when there already was an error.
There is still a lot left to do, including:
* Type `type` should be a facet type with a reserved id, replacing the
built-in instruction.
* Code using `TryAsSingleInterface` should generally be upgraded to
handle more than (or less than) one interface. Name lookup should be
particularly exciting.
* Operator `&` should be defined on facet types, unioning their
interface and other requirements.
* Requirements from a `where` clause don't do anything yet.
* Impls and impl lookup need to resolve facet types, and do things like
determine if all the associated constants are given values.
---------
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
Co-authored-by: Geoff Romer <gromer@google.com>
This converts `StructTypeField` from an instruction to a dedicated type,
with its own store. This had originated from discussing how
`.GetAs<SemIR::StructTypeField>` was more prevalent than for other
instructions, but is probably more interesting for the storage savings
(16 bytes StructTypeField + 4 byte LocId + 4 byte InstId -> 8 byte
StructTypeField).
Due to the different structure, these now have their own stack during
construction, reducing (but not eliminating) `args_type_info_stack_`
use-cases.
The test changes of different InstIds is expected because structs and
classes generate fewer instructions now. Other than that, results should
remain the same.
I'm generally trying to avoid unrelated cleanup here due to the PR size,
though I did scrutinize the `VerifyOnFinish` calls, adding one and
commenting others (putting them in member order because that's how I was
checking what was verified and what wasn't).
Still to do:
* Represent facet type values in a canonical form
* Produce & consume facet type values instead of interface values
* `type` should be associated with a canonical facet type value
* Support `&` on facet type values
* Type check and enforce requirements in facet types
---------
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
This is in anticipation of making the integer value store be customized
heavily. I'd like to extract it from the common code when doing that, so
first disentangling them here without any intended change in
functionality or behavior to enable that.
I've tried to update `#include`s to be as minimal as I can and added a
few missing includes spotted in the process.
I've split the test for value store to include what was easy focused on
just the value store templates rather than the unified shared value
stores.
This might surface some opportunities for adding more tests, but for
this PR, just doing the minimal restructuring.
This instruction represents integer values, whether they come from
literals or calculations, so it the old name is inaccurate. I also plan
to rename `BigInt` to `IntLiteral` based on recent discussion and this
change aims to avoid confusion stemming from the same name being used
for two different things.
I'm not renaming `FloatLiteral` because recent discussion suggests we
may want distinct `FloatLiteral` versus `FloatValue` representations in
SemIR.
Building on #4411, avoid using StringLiteral in format strings. This
includes a diagnostic check to prevent regressions (which is also how I
gathered issues).
Note, I haven't looked at `std::string` uses yet, but we might need
things like that to be able to pass strings in code back to the user.
StringLiteral though means that it's literally written down in the
toolchain, at which point it should probably be written in the format
string instead of separately.
---------
Co-authored-by: Geoff Romer <gromer@google.com>
Note, this supports plurals, but doesn't apply it anywhere. I'm mainly
doing that to demonstrate the approach regarding syntax. See
format_providers.h for details.
Also propagate the pattern IR along with the pattern-match IR, and use
it where appropriate.
Strictly speaking, some parts of the pattern-match IR are allocated
eagerly, while traversing the pattern's parse tree, but they still
aren't actually emitted until we traverse the associated pattern insts.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Add a new `specific_function` instruction that represents a generic
function plus its deduced argument list as a callee in a function call.
The new instruction can only appear as the immediate operand of a call
instruction, so we give it a builtin placeholder type.
At the end of each file, require definitions for all specific functions
used in that file. Resolve the generic with the argument list to produce
those specific function definitions as needed, and diagnose if the
generic doesn't have a definition available.
A few tests are updated in cases where they declared and used generic
functions but didn't previously provide a function definition.
This adds deduction in all the cases where we can match the instruction
fields of the parameter against the corresponding instruction fields of
the argument. This handles all current type constants except for struct
types, for which we would want to match by field name.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Instead of stringifying types in the caller in some cases, add new types
to represent:
- `InstIdAsType`: an `InstId` diagnostic argument that represents a type
expression that should be included in the diagnostic
- `InstIdAsTypeOfExpr`: an `InstId` diagnostic argument that represents
an expression whose type should be included in the diagnostic
For these cases, we can produce more user-friendly descriptions of a
type than we can with a canonicalized `TypeId`. Add comments to
discourage using `TypeId` diagnostic arguments when one of the above can
be used, and move over existing uses where it's straightforward to do
so.
Move type stringification code to its own files and out of `SemIR::File`
to make `File` smaller and to further discourage the direct use of the
stringification logic.
Also update type printing to include the `` ` `` delimiters surrounding
the type. The intent is that we will eventually want to include other
information when formatting a type, like Clang does when printing a
typedef (`'string' (aka 'std::basic_string<char>')`), and such
formatting requires that the diagnostic machinery produces the `` ` ``s
itself.
There are a couple of cases where we really want to format valid Carbon
type syntax directly into a diagnostic, rather than an `aka` or similar,
because the diagnostic text includes part of the type itself, for
example: ``"consider using `partial {0}`"``. For such cases, a `Raw`
form of the diagnostic argument types is added: `TypeIdAsRawType` and
`InstIdAsRawType`. In principle we could instead use ``"consider using
`partial {0:raw}`"``, but our diagnostic machinery isn't set up for
that.
---------
Co-authored-by: josh11b <15258583+josh11b@users.noreply.github.com>
The check stage now produces SemIR instructions to represent a `where`
clause. It still does not check types.
---------
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Introduces the `BindingPattern` and `SymbolicBindingPattern` insts, and
a separate stack of pattern blocks that they are emitted into. The
intent is to generate the corresponding pattern-matching insts (like
`BindName`) from them in a separate pass, but that is deferred to future
PRs.
See
[here](https://docs.google.com/document/d/1U_vQH17V893J9aF1LJXUnFYBNSs2MjKl4bJPaWCB2zo/edit?usp=sharing&resourcekey=0-w0xGYZ0An31Kpz-wvzSXwQ)
for the design this is based on, but note that during review we have
chosen to deviate from that design by putting the patterns in separate
blocks, and omitting the "forward references" from a `BindingPattern` to
its corresponding `BindName`. This in turn necessitates having separate
inst kinds for symbolic and non-symbolic binding patterns.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
This is a primarily automated change:
- Search & replace for capitalization
-
`(CARBON_DIAGNOSTIC\((?:\n\s+)?\w+,(?:\n\s+)?\s\w+,(?:\n\s+)?\s")([A-Z])`
- `$1\L$2`
- Search & replace for period
-
`(CARBON_DIAGNOSTIC\((?:\n\s+)?\w+,(?:\n\s+)?\s\w+,(?:\n\s+)?\s"(?:[^)]|\n)+)\.("[,)])`
- `$1$2`
- Limited search & replace for `ERROR: ` -> `error: ` in streamed things
- Leaving a TODO for command_line because there's more cleanup that can
be done there
- Modify diagnostic_consumer.cpp
- ERROR -> error
- WARNING -> warning
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Add support for initializing types like `GenericClass(i32)` from a
struct literal. A new kind of instruction, `complete_type_witness`, is
added to the class definition to track the object representation type so
that it's visible to the generics machinery. Accesses to the object
representation of a class have all been updated to pass in the class's
`SpecificId` so that the types of the fields of the specific class are
used instead of the types of the fields of the generic class in places
that look at the object representation -- primarily class
initialization.
Richard Smith
Dana Jansens
David Blaikie
Jon Ross-Perkins
