Both of these I noticed from testing #4785, but they occur at head.
```
(elided)/execroot/_main/common/raw_hashtable.h:532:40: error: do not use nested 'std::max' calls, use an initializer list instead [modernize-min-max-use-initializer-list,-warnings-as-errors]
532 | static constexpr ssize_t Alignment = std::max<ssize_t>(
| ^
533 | {alignof(MetadataGroup), alignof(StorageEntry<KeyT, ValueT>)});
| ~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| static_cast<long>(alignof(MetadataGroup)) static_cast<long>(alignof(StorageEntry<KeyT, ValueT>))
(elided)/execroot/_main/toolchain/install/busybox_info_test.cpp:259:8: error: unused local variable 'usr_prefix' of type 'std::filesystem::path' [bugprone-unused-local-non-trivial-variable,-warnings-as-errors]
259 | auto usr_prefix = MakeInstallTree(dir_ / "usr");
| ^
(elided)/execroot/_main/toolchain/install/busybox_info_test.cpp:260:8: error: unused local variable 'usr_local_prefix' of type 'std::filesystem::path' [bugprone-unused-local-non-trivial-variable,-warnings-as-errors]
260 | auto usr_local_prefix = MakeInstallTree(dir_ / "usr/local");
| ^
```
The std::max diagnostic seems a little confused, but the initializer
list seems like it can be dropped without any loss. The unused locals
diagnostic is correct.
Neither of these seem like they should be newer than my last clang-tidy
pass, maybe I just missed them in other sweeps.
The Function.h include was simply unused, I was partly dropping the bits
that would've depended on it. Protocol.h is used, but it should really
be included from handle.h.
This makes InstFingerprinter::GetOrCompute for InstId and InstBlockId
more similar, in that they just construct a Worklist and call Run.
The Worklist::Run method differentiates if the next todo item is an
InstBlockId and in that case it adds everything in the block to its
todo list and continues processing.
We only use the fingerprint of an InstBlockId if its at the bottom of
the todo stack, which is the case when it's placed there initially by
InstFingerprinter::GetOrCompute. We could cache it but we currently
do not. If we did, we could also cache other InstBlockIds found
inside instructions, but at the moment we skip through them and
add their instructions rather than adding the InstBlockId to the
todo stack.
Instead of including the raw index of the specific, which is unstable
across files and across unrelated changes, use a fingerprint of the
constant values of the specific arguments. This is a placeholder until
we decide on how we want to mangle specific functions.
The InstId in this field is to an instruction that declares the
function, rather than the function itself, so that diagnostics can print
where the function is coming from. The type of the function (the
FunctionType instruction) is the type (the type_id) of the
function_decl_id. So we rename the field to help make this distinction
more clear.
Followup to #4739
Change the implementation to use an explicit `is_poisoned` bit instead
of `InstId::PoisonedName` value.
Zero behavior change.
This would allow to more easily change the API to support accessing the
poisoning declaration so we can have better name poisoning diagnosis.
#4622
Add a builtin `"int.convert"` supporting unchecked conversions between
different integer types. This performs a truncation, zero-extension, or
sign-extension, depending on the widths of the operands and the
signedness of the source type. Add explicit `As` support to the prelude.
No implicit conversions are supported yet as we don't have a way to
express the constraint that we can only implicitly convert to wider
types.
I'm trying to make the LSP look more like the rest of the toolchain. I'm
trying to separate the handlers from the transport layer, and remove the
multiple inheritance aspect. Also fixing some style issues, switching to
`Map`, and removing an unnecessary copt.
I'm using `Context` for the central object for consistency with other
portions of the toolchain. In order to get the `handle_*` files working,
I'm using LLVM's registry class. It has a quirk that I can't register
two registries in the same cpp file, so there are two one-line cpp
files.
In order to help show the delta (or lack thereof) for actual
implementation, I've copied server.cpp over handle_* and undone that in
two commits. See the third and fourth commits on the PR history for
that.
Hi,
I fixed a small issue that I found inside the "compile subcommand"
component:
The program can be crashed by running ```bazel run -- toolchain:carbon
compile --dump-mem-usage "non-existing-file.carbon"``` - i.e. by
activating the memory usage dump flag and passing a non-existing file.
Best regards,
oz
* Implement ignoring the difference between `Self as` and `as`, as well
as `where` clauses at the end of an `impl` declaration when checking
whether `impl` declarations match, from #3763.
* Allow impl declarations with different constraint ids to match, as
long as the facet type of the constraint has the same interface_id and
specific_id.
* Add some TODOs reflecting future facet type resolution.
---------
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
Use it in the instruction namer to make instruction names more stable
across unrelated changes to the toolchain or the prelude.
---------
Co-authored-by: Dana Jansens <danakj@orodu.net>
In practice, I am unable to call constructors like `SemIR::InstId` from
a debugger. I first tried to use
https://clang.llvm.org/docs/AttributeReference.html#noinline to make
some non-inline calls to the constructor, but that didn't work:
```
toolchain/sem_ir/dump.cpp:245:23: error: 'noinline' attribute is ignored because there exists no call expression inside the statement [-Werror,-Wignored-attributes]
245 | [[clang::noinline]] return InstId(inst);
|
```
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
Follow-on to #4669 . Did some manual testing, but may have not exercised
all code paths.
---------
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
When creating a tuple or struct type object/value, we will walk each of
the tuple's or struct's parts, respectively, and Convert() each of them.
This allows (T, T) to convert to (U, U) and so forth. It also performs
the conversion from value to initialization even for the same types,
such as converting from a value of (T, T) to an object of (T, T).
Classes need to define their own conversions but when the target and
source types are the same, there is no conversion of types taking place.
If the class adapts a tuple or struct then walk each of the tuple's or
struct's parts, respectively, and Convert() each of them in order to
initialize the parts of the target.
For copyable types, the conversion implies a copy in the initialization,
and for non-copyable types, an error is emitted.
This supports copying a class value to a class object when it is an
adapter of a tuple or struct.
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
This is caused by setting a temporary lambda to a `llvm::function_ref`.
The fix is to assign the lambda into a variable that outlives the
`llvm::function_ref`.
Imported declarations that are contained within a generic, such as an
`impl forall...` would be given an abstract symbolic constant value
instead of a concrete generic value in some cases where the function was
used in an api file and impl file of the same library. This caused #4679
to fail using `ImplicitAs.Convert` transitively imported from the
prelude.
---------
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
* Change `InterfaceWitness` -> `ImplWitness`
* Include a `SpecificId` in the `ImplWitness`. This allows the
`InstBlock` it contains to have its own identity, allowing it to be
changed as the impl is processed. Evaluation only updates the specific.
* Create the `ImplWitness` at the start of the impl definition. In the
future, this will be populated with the values of non-function
associated constants. For now, it starts full of invalid instruction
ids.
* Implements the model suggested in #4672 .
Note that the non-SemIR testdata changes are to these file:
* `toolchain/check/testdata/impl/lookup/fail_todo_undefined_impl.carbon`
* `toolchain/check/testdata/struct/import.carbon`
* `toolchain/check/testdata/tuple/import.carbon`
The last two are due to an import of generics bug exposed by this PR,
which will be fixed in a follow-on.
---------
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Fixes integer builtins to produce the correct values (and not
CHECK-fail) when used on integer literals. Also adds impls to the
prelude to use the new builtins to perform operations on integer
literals.
Perhaps most importantly, this allows directly initializing `i32` values
with negative numbers, as the negation operation on integer literals now
works.
For testing I've added tests for use of literals with one operator in
each class (addition, multiplication, ordering, bitwise, etc) for which
there are distinct rules or overflow behavior, rather than exhaustively
testing all the combinations. This is aimed at finding a good tradeoff
between maintainability of the tests and thorough test coverage.
Also fixes lowering of heterogeneous shifts and comparisons. These are
currently disabled when one of the operands is an integer literal, but
we may want to allow that when the integer literal operand has a known
constant value.
Add `EXTRA-ARGS:` support to file_test, to add arguments without
overriding the default arguments. Use `EXTRA-ARGS: --no-dump-sem-ir` to
turn off SemIR dumping and thus SemIR testing in the int builtin tests,
which validate correct behavior through diagnostics instead.
This doesn't get us any closer to supporting more targeted SemIR dumping
/ testing, but this seems to be a generally useful feature anyway. Most
existing
tests using `ARGS` have been switched over to using `EXTRA-ARGS`.
Requested in review of #4716.
Make `int.snegate` ignore the signedness of its operand and
unconditionally check for signed overflow like all the other `int.s*`
builtins do. Fix the prelude implementation of unary `-` for `Core.UInt`
to use `int.unegate` instead of `int.snegate`.
Fix the test for unsigned negate to actually test negating unsigned
integers, and add some tests that unary `-` also works.
We were mistakenly using the signed builtins, which produce the same
lowering for add/multiply right now, but don't for division and modulus.
When manually flipping SignedOverflowIsUB on, the signed version of add
gains the nsw (no signed wrap) flag, while the unsigned version
(correctly after this change) does not:
```
// CHECK:STDOUT: define i32 @_Cadd_i32.Main(i32 %a, i32 %b) !dbg !4 {
// CHECK:STDOUT: entry:
// CHECK:STDOUT: %int.sadd = add nsw i32 %a, %b, !dbg !7
// CHECK:STDOUT: ret i32 %int.sadd, !dbg !8
// CHECK:STDOUT: }
// CHECK:STDOUT:
// CHECK:STDOUT: define i32 @_Cadd_u32.Main(i32 %a, i32 %b) !dbg !9 {
// CHECK:STDOUT: entry:
// CHECK:STDOUT: %int.uadd = add i32 %a, %b, !dbg !10
// CHECK:STDOUT: ret i32 %int.uadd, !dbg !11
// CHECK:STDOUT: }
```
Note that I left some calls to `is_defined()` where I thought they were
interchangeable.
---------
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
Comment became out of date with #4698 . Seems better to delete instead
of update this comment.
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
Use a deque to maintain the set of instructions to be walked over. so
that the loop can append more instructions (with their related scope)
during iteration without requiring recursion.
---------
Co-authored-by: jonmeow <jperkins@google.com>
This restores the symlinks for the installation, but teaches the busybox
info search to look for a relative path to the busybox binary itself
before walking through symlinks. This let's it find the tree structure
when directly invoking `prefix_root/bin/carbon` or similar, either
inside of a Bazel rule or from the command line, and mirrors how we
expect the installed tree to look. This works even when Bazel resolves
the symlink target fully, and potentially to something nonsensical like
a CAS file.
In order to make a convenient Bazel target that can be used with `bazel
run //toolchain`, this adds an override to explicitly set the desired
argv[0] to use when selecting a mode for the busybox and a busybox
binary. Currently, the workaround uses an environment variable because
that required the least amount of plumbing, and seems a useful override
mechanism generally, but I'm open to other approaches.
This should allow a few things to work a bit more nicely:
- It should handle sibling symlinks like `clang++` to `clang` or
`ld.lld` to `lld`, where that symlink in turn points at the busybox.
We want to use *initial* `argv[0]` value to select the mode there.
- It avoids bouncing through Python (or other subprocesses) when
invoking the `carbon` binary in Bazel rules, which will be nice for
building the example code and benchmarking.
It does come at a cost of removing one feature: the initial symlink
can't be some unrelated alias like `my_carbon_symlink` -- we expect the
*first* argv[0] name to have the meaningful filename for selecting
a busybox mode.
It also trades the complexity of the Python script for some complexity
in the busybox search in order to look for a relative `carbon-busybox`
binary. On the whole, I think that tradeoff is worthwhile, but it isn't
free.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Instead of providing operations only for `i32`, provide them for all
`iN` and `uN` types.
For now, this excludes the `*Assign`, `Inc` and `Dec` interfaces,
because the implementations for those are defined as Carbon functions
rather than builtins, and we can't yet lower definitions for specific
functions, so converting those to be generic breaks the build for our
examples.
This is a precondition for enabling the new pattern-matching subsystem
to support binding patterns that have `if` expressions in the type
position.
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
We defer lowering initialization with constant values, because the use
of the constant can itself be part of a larger constant that we don't
want to emit. However, when the initialization is for an element of a
non-constant aggregate, we do need to initialize the constant portion.
Pursuant to discussion regarding #4699, turn on
`misc-non-private-member-variables-in-classes` using the
`IgnoreClassesWithAllMemberVariablesBeingPublic` flag (the check treats
structs as classes, so we need this for structs with all-public
members). Updates the style guide notes to match, which should be pretty
minor due to the scoping of test fixtures.
Also fixes some underscore uses in test files on the way. Basically this
is keeping the style for [class data member
naming](https://google.github.io/styleguide/cppguide.html#Variable_Names)
even while making them public.
Also add underscores to member names, and make `PushSpecificId` private
since it's not used outside `PushEntityName`
---------
Co-authored-by: Geoff Romer <gromer@google.com>
I was wondering, instead of treating `misc` differently and enabling
specific checks, maybe we can flip that since we actually seem okay with
most of the checks?
The main check I'm enabling, with significant edits here, is
`misc-no-recursion`. But maybe this is helpful to enable, even with the
necessary NOLINTs, since we want to avoid recursion in the toolchain?
This PR shows some example fixes in subst.cpp (which are more stylistic,
since the code shouldn't actually have recursed due to its structure; I
think we could remove the warning on TryResolveInst the same way). Some
also just don't seem worth fixing, like those in tests files (I didn't
see a way to exclude files in .clang-tidy, so instead I'm using
NOLINTBEGIN). But I think we might actually want to fix inst_namer, and
there's enough in convert that I didn't look closely.
Also, I made some protected -> private style fixes based on
`misc-non-private-member-variables-in-classes` (this is also how I
noticed `class Real` versus `struct Real`). With node_stack, it looks
like the `protected` wasn't even used. [Per
style](https://google.github.io/styleguide/cppguide.html#Access_Control),
data members should be private outside tests. But since we can't
trivially exclude `protected` members in tests, I'm turning it off -- I
don't view it as offering enough benefit on the whole.
migrate_cpp issues are preexisting (I believe we just aren't monitoring
it), but changes there make `bazel build --config=clang-tidy -k //...`
work cleanly.
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Jon Ross-Perkins
Richard Smith
Dana Jansens
Boaz Brickner
ottmar-zittlau
josh11bandJosh L
Geoff Romer
Chandler Carruth
David Blaikie
