Implement support for floating-point <-> integer type conversions as
described in #820 and #845, extended to support `unsafe as` conversions
for the conversions that can't be expressed as either implicit
conversions or `as` conversions.
One tricky part here is conversions from floating-point literals to
integer types. Such literals may have both a very large mantissa and a
corresponding somewhat large negative exponent, and still produce a
result that is in the range of values that a small integer type can
represent. In order to support that while avoiding building very large
2^N or 10^N constants in general, we first compute a conservative
approximation of the number of bits necessary to represent the integer
result, with an early exit if the number is either definitely too large
or definitely zero. The remaining cases have a reasonable bound on the
size of integer necessary to compute the base^exponent multiplicand.
Assisted-by: Gemini via Antigravity
Add `ExportVarToCpp`. This checks the `clang_decls` mapping and returns
an existing decl if found. Otherwise, it creates a new `VarDecl` and
adds it to the `clang_decls` mapping.
When lowering, in `FileContext::BuildGlobalVariableDecl`, the
`clang_decls` mapping is used to lookup an existing
`llvm::GlobalVariable` for the instruction. If found, use that rather
than creating a new one to avoid an unwanted second definition in the
llvm IR.
This change adds rudimentary support for C++ ranges in Carbon range-for
loops. Since C++ ranges are exposed through `Core.Iterate`, C++ ranges
have the same limitations as Carbon ranges (e.g. can't return
references).
`Iterate.CursorType` now requires `Destroy`, since types that implement
`CppRangeForIterate` can't be used in range-for loops unless their
cursor type can be verifiably destructible.
Since we can't currently iterate over ranges as references, the
`CppUnsafeDeref` interface can't require types that implement it to take
or return references.
When we import from another library in the same package, its entities
end up with our library as their parent scope, resulting in cross-file
fingerprint mismatches. Instead, only include the library ID when
fingerprinting either a package-private entity or an `ImportIRId` that
refers to a particular `SemIR::File`.
For now, disable the use of array types as by-var paramters and by-init
return types when exporting Carbon functions to C++, as C++ does not
support raw arrays being passed or returned by value.
Assisted-by: Gemini via Antigravity
Include the library name in the fingerprint of an entity declared
`private` at namespace scope. Include the entity's fingerprint in the
mangling of a library-private entity.
This fixes miscompiles if two libraries in the same package declare
`private` entites with the same name. We can't fix this with internal
linkage because library-private entities can be reachable through
generics defined in the API file of the library.
Assisted-by: Gemini via Antigravity
Carbon-side thunks (for example the `Copy`/`Destroy` witness thunks
generated for imported C++ types) are mangled by Carbon, and their names
incorporate a fingerprint of the involved types. The instruction
fingerprinter identifies a class only by its name and parent scope,
which is sufficient for Carbon classes but not for imported C++ classes:
different specializations of one class template (and other cases such as
types in anonymous namespaces) share a Carbon name and parent scope. As
a result, the thunks for two distinct specializations could mangle to
the same name, producing a single LLVM function with two definitions and
failing `verifyModule` during lowering.
When fingerprinting a class imported from C++, also include the Clang
mangled name of its type.
Test: toolchain/lower/testdata/interop/cpp/thunks.carbon gains a split
with two specializations of one class template, each requiring a thunk;
their thunks now get distinct mangled names instead of colliding.
Assisted-by: Claude Code
---------
Co-authored-by: Christopher Di Bella <cjdb.ns@gmail.com>
When forming the constant value of a `where` expression, don't consider
it to be `.Self`-dependent if the dependence only comes from the RHS of
the `where`. More generally, ignore `.Self` dependence when evaluating a
facet type unless it comes from an extended interface or named
constraint. While we can get other kinds of constraint from the
left-hand side of a `where`, such constraints must either come from the
right-hand side of other `where` expressions or be extend constraints.
This fixes a crash in lowering caused by a concrete function containing
a `.Self`-symbolic `where` constant.
Assisted-by: Gemini via Antigravity
When performing deduction for a call to a generic function, we would
previously convert runtime arguments to match the parameter type, then
throw away the result. Instead, track whether deduction needs the value
of the argument, which will be the case only within compile-time
contexts such as generic bindings and types of instructions, and only
perform conversions during deduction for those contexts.
Fixes miscompiles when passing an argument requiring a runtime
conversion with side-effects to a generic function, where previously the
side-effects would have happened twice! (Once from deduction and once
from the real call argument conversion.)
Assisted-by: Gemini via Antigravity
Allow a `ref`-tagged expression to be converted to match a reference
parameter. Move the `ref` checks to the start of `Convert`. Remove the
diagnostic for applying `ref` to a non-reference expression so that
non-reference expressions that convert to a reference would be accepted
(although we don't currently have any such conversions).
Assisted-by: Gemini via Antigravity
`CppRangeForIterate` needs to support finding `begin()`/`end()` as a
pair of methods and as a pair of ADL-findable functions. This change
adds the ADL component, which lets us also diagnose types that don't
implement the interface.
Unlike methods, we apparently have support for overloads when using ADL.
Flush diagnostics before destroying Clang. If we see an `inline Cpp` and
`Cpp` initialization failed, recover by skipping the inline code rather
than CHECK-failing.
Fixes link failures when referencing a symbol involving a fingerprint
from a different package.
Previously we included the `Namespace`'s `import_id` as part of its
fingerprint, which caused local and imported namespaces to get different
fingerprints. We now store the `import_id` on the `NameScope` instead of
on the `Namespace` inst to avoid this problem.
Also, when we reach a package-level `NameScopeId`, consistently
fingerprint it as a (package name, library name) pair. Previously the
fingerprinting depended on whether it was imported or not, as an
imported `NameScopeId` had a parent scope (the current package). We need
to include the library name here so that private entities with the same
name in different libraries have different fingerprints.
Provide a source location to the member expression used when a thunk
calls a member function. This ends up being used as the point of
instantiation when the return type triggers a template instantiation;
the absence of this location previously caused assertion failures within
clang.
Assisted-by: Gemini via Antigravity
Rearrange the file_test infrastructure so that we can customize the
mapping of file names to command line arguments. Map `module.modulemap`
files to corresponding Clang driver flags. In passing, also clean up the
interface for specifying custom argument replacements so that we don't
build a string map for each file we process, and stop using
`SmallVector::insert`.
Assisted-by: Gemini via Antigravity
We were incorrectly computing the index of the Clang implicit conversion
corresponding to method arguments. This led to wrong code and a crash in
lowering due to a calling convention mismatch.
Fixes#7224.
Assisted-by: Gemini via Antigravity
This allows Clang to correctly generate the vtable for the exported
class.
There's still something wrong with new virtual functions in the Carbon
type (left a TODO) - I thought it might be related to not flagging
the CXXMethodDecl as virtual, but my initial experiments don't seem to
back that up, so I'll look into it further separately.
There's also a test regression due to an virtual (well, abstract
specifically, but I think it'd happen with a virtual one too) function
in an abstract class taking `self` by value being rejected since
the abstract class can't be instantiated. Not sure if this is a correct
change - the test's behavior could be preserved by using `ref self`
instnead of `self` in this function. Is that reasonable/expected? Should
we not require a type to be complete when passing by value if we can
compute the value representation without such completeness?
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
This also fixes passing a value expression to a forwarding reference,
since we currently deduce a `const T&&` parameter in that case.
We were accidentally looking at the type of the thunk parameter (which
is never an rvalue reference) rather than the type of the callee
parameter.
Not every entry in a C++ vtable corresponds to a function that we want
to import. For the holes, leave a `SemIR::InstId::None` in the vtable.
Also mark vtables that extend a C++ vtable as being non-Carbon-native so
we don't try to lower them (and crash on the `None` entries).
In particular, we leave holes for destructors, since we don't have
destructor declarations on the Carbon side that need to override them.
* For Carbon `base class C`, export as a regular C++ class.
* For Carbon `class C`, export with the C++ `final` keyword attribute.
* For Carbon `abstract C`, mark the destructor as pure virtual in cases
where no member function is abstract, or emit an error if the destructor
is not virtual.
To support the final point, mark the destructor of an exported class as
virtual if it overrides a virtual destructor from the base class.
In passing, fix a crash exporting fields if the class has an invalid
base type.
A nested designator like `.(X.X1).(Y.Y1)` results in nested
ImplWitnessAccess instructions, which can produce cycles in the
toolchain easily when replacing `.Self`.
First, when constructing a facet type like `V:! Z where .Z1 impls (Y
where .Y1 = U)` we substitute replace `.Self` in the nested facet type,
and in this case we replace `.Self` with `.Z1` which contains a `.Self`
of its own. This was coming from us being lazy about replacing `.Self`
in an `impl as` declaration, such as `impl C as Z where .Z1 = .Self`.
The self type is known there, so we can more eagerly replace `.Self` as
we do in a `require impls` declaration. Then the replacement for `.Self`
never comes with a `.Self` that needs to also be replaced. Any resulting
`.Self` would always be the top-level one.
Second, when evaluating ImplWitnessAccess, we were replacing .Self in
the LHS of rewrite constraints, but the `.Self` may itself have a type
that contains rewrite constraints. If one of those rewrite constraints
has nested ImplWitnessAccess instructions, we evaluate the new
ImplWitnessAccess, which again finds rewrite constraints to replace
`.Self` in, and we repeat forever. For this one we just stop replacing
.Self in the LHS of rewrite constraints. Since they are always against
.Self, we can always look in the access facet's type for a value.
While fixing ImplWitness access, also correct the lookup to search
through the types of nested ImplWitnessAccess instructions to find a
rewrite value, since it may find it at any level up to the eventual
`.Self`.
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Previously, we picked a single Carbon parameter pattern for each C++
parameter pattern. This doesn't work well in cases where the Carbon
semantics and the C++ semantics are not perfectly aligned. In
particular, when a parameter is passed by value in C++, that might mean
either pass-by-move (which in Carbon would best be modeled by a `var`
pattern, as no other form of parameter would perform a move) or
pass-by-copy (which in Carbon would best be modeled by a value
parameter, as a `var` parameter would force an extra copy).
After this change, we compute a passing mode for each parameter based on
the implicit conversion sequence from the argument to the parameter as
determined by C++ overload resolution, and use that to determine the
Carbon pattern corresponding to each C++ parameter. This results in
potentially generating multiple different thunks for the same C++
function if it's called in different ways, but we already did that to
handle default arguments and list-initialization. The passing modes are
included in the thunk mangling.
Add a new value store for clang decl signatures, which capture the
information about parameter passing mode as well as the other existing
information about different ways that a C++ function might be imported
to Carbon.
Most of the rules for computing passing modes are the same as before:
const references use pass by value, non-const lvalue references use
pass-by-ref, non-const rvalue references use pass-by-var. But for C++
non-reference parameters, pick between pass-by-value and pass-by-var
based on whether the implicit conversion sequence was effectively
performing a copy. Prefer pass-by-value if either would work and they'd
do the same thing. We still use pass-by-value for const references, even
when the argument is an lvalue and we could pass a reference; we may
want to change this in future.
For virtual functions, we try to pick a worst-case passing mode, as we
can only pick a single signature for what goes in the vtable. Calls to
virtual functions will still use a thunk to C++, allowing variance in
the calling convention at call sites. We don't allow variance in the
overriders as we don't implement support for thunks for virtual
functions yet. We currently use pass-by-value for const reference
parameters here, but that should probably change at some point.
Assisted-by: Gemini via Antigravity
This commit adds support for range-based for loops using C++ types. It's
currently limited to detecting that `r.begin()` and `r.end()` are
available. We should be able to add full support for methods after #7181
is merged.
Support for ADL is still a work-in-progress, and will be added at a
later time.
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Implement the alias rules from proposal #5389, wherein an alias is
permitted so long as the target has a constant value. While that
proposal is not yet accepted, this seems like a reasonable basis for
further iteration, and will be useful for the examples we're currently
pursuing.
This correctly renders the vtable in SemIR, including allowing overrides
in
Carbon-derived-from-C++ classes.
It doesn't work in lowering because clang walks the methods of the
CXXRecordDecl - and we currently don't export anything into the
CXXRecordDecl's methods (we do export the fields) - so that's next.
This also doesn't teach Clang to affirmatively emit the vtable
regardless of the types use in C++ code - or to have Carbon use the
vtable in an object's initialization.
Roundtrip (export/reimport) class declarations
The remapping was previously implemented using name_scopes, which aren't
created for class declarations, only definitions - causing the reimport
to import a fresh copy of the type that mismatched with the original (as
seen in the test baseline).
By changing the mapping to use the reverse part of the clang_decls
mapping this should generalize better (& we probably should further
migrate to that mapping). Though it did trip over some issue with
exactly which instruction is used as the key in the clang_decls map -
this change moves towards standardizing on the first decl id of the
class as its map key.
Fixes mangling collisions when two thunks with the same name (eg, `Op`)
are created in the same context, which in turn would lead to LLVM
verifier failures and miscompiles.
To support this, add a new value store to track a little more
information about thunks beyond what's in the `Function`.
This lets us stop eliding it in textual semir tests with dump ranges.
Previously it would always get elided, even though it was part of the
range being dumped, and was referred to by other instructions in the
dump range.
Since each `.Self` is unique (can change its type if not its value) in a
facet type, having each one distinct by location also aids
understanding.
When any field of a Carbon class is access from C++ for the first time,
all fields are exported as `clang::FieldDecl`s (this is necessary
because clang fields have an internal index that is initialized on first
use).
`ClangDeclStore` now provides bidirectional mapping. This allows looking
up a `ClangDeclId` by `InstId`, so when Carbon class fields are exported
they can be looked up that way.
See
[here](https://docs.google.com/document/d/1rWcueFwIfZox6GKVGxiUG4cBzjrZ6djXiIDGyJDtrE4/edit?tab=t.0)
for the design doc.
This also removes the default value of the `result_type_inst_id`
parameter of `HandleAction`, moves it before the action in the parameter
list, and documents it. This solves two problems:
- The default made it easy to forget, leading to unnecessary
`TypeOfInst` instructions.
- When it was present, putting it after the fairly "bulky" action
argument tended to make the callsite harder to read.
When importing a C++ function with an rvalue reference parameter, we
previously produced a Carbon value parameter. This would lead to the
toolchain believing it could pass the address of a non-expiring object
to the function, which would lead to a use-after-move.
Instead, we now map non-const rvalue reference parameters to Carbon
`var` parameters. This forces the object passed into C++ to be unique
and owned by the call. While that's not an exact match for C++ rvalue
reference parameters, given that it provides "always move" not
"conditionally move", it's the closest match we have at the moment.
When a namespace that was imported from C++ is indirectly imported, find
the corresponding namespace in the current C++ AST and return that
instead. This namespace may have completely different contents than the
one we found before; that's fine. The current file's view of a namespace
depends on what it imported.
Assisted-by: Gemini via Antigravity
When a class template specialization is indirectly imported, map the
template arguments into the importing File and find the corresponding
local class template specialization. This is a short-term fix:
eventually we should import the C++ AST from the imported file into the
C++ AST for the current file, but we're not ready to do that yet.
So far we only support very simple template arguments: just classes and
builtin types. Unfortunately we can't just map the C++ template
arguments to Carbon types, then import the Carbon types, then map them
back, because mapping from C++ template arguments to Carbon types would
require a `Check::Context` for the imported code, which we don't have.
As this is only a temporary workaround, directly mapping from one C++
AST to another will do for now.
Assisted-by: Gemini via Antigravity
Fixes a crash that would occur due to `scope_id` of the class being
unset.
Relands #7106 that was reverted by #7103 due to a github infrastructure
bug.
Co-authored-by: David Blaikie <dblaikie@gmail.com>
When importing Carbon code that refers to a C++ class, look for a
corresponding C++ class in the current context and import that instead.
This is a workaround for not having proper cross-file C++ import
support. For now, we only support non-templated namespace-scope class
types.
Assisted-by: Gemini via Antigravity
When creating the C++ thunk, make the parameters references if the
corresponding callee parameters are `ref`s.
When creating the Carbon thunk, tag the call arguments as `ref` if the
corresponding callee parameters are `ref`s.
Instead of treating all C++ code as coming from a single synthetic
`CheckIRId`, track the `SemIR::File` associated with each C++ location.
This is necessary since each `SemIR::File` has a distinct `CppFile` and
therefore distinct `SourceLocation`s and `ClangSourceLocId`s.
Assisted-by: Gemini via Antigravity
Richard Smith
Nicholas Bishop
Christopher Di Bella
Chandler CarruthandChristopher Di Bella
josh11bandJosh L
David BlaikieandRichard Smith
Dana JansensandRichard Smith
Geoff Romer
dependabot[bot]