Don't wait until we reach the end of the eval block to set the value
block on the specific. This is a prerequisite for allowing template
actions to read from the specific.
Implementing interface modifiers causes an infinite loop when generating
fingerprints because the witness value generates a fingerprint that's
dependent on something dependent on the witness value. We've debugged
this to the witness table's `elements_id` field.
This hack is a workaround for creating a new block type whose value is
not codependent with its identity.
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Instead of tracking the cleanup scope depth on entry to each scope,
track an "ambient" cleanup scope depth that's *after* the destructors of
local variables in that scope. This gets increased to include the
destructors of local variables when we create a name-binding
declaration. Then, when we reach a point where temporaries should be
destroyed, run cleanups that are after the ambient cleanup scope depth
on the stack. This happens:
* At the `;` of a statement expression.
* At the `)` of an `if` or `while` statement.
* After performing the implied `HasValue()` call in a `for` statement.
Per informal agreement with leads, this means we lifetime-extend all
temporaries created in the initializer of a name-binding declaration to
the full scope of that declaration, but that temporaries created in an
expression statement are destroyed at the `;`.
Destroy local variables and temporaries at each `}`, and when branching
with `break` and `continue`. In `for` statements, destroy loop variables
along with anything created within the loop at the end of each loop
iteration, and destroy the cursor and range object when the loop
terminates.
Assisted-by: Gemini via Antigravity
---------
Co-authored-by: Geoff Romer <gromer@google.com>
Implement the toolchain side of proposal #7254, removing the `:!`
binding
syntax for generic and template parameters in favor of the keywords
`generic`,
`template`, and `runtime` plus contextual defaults for phase.
For valid programs this is semantics-preserving: each binding resolves
to the
same phase, and produces the same SemIR, as it did under `:!`/`:`. The
parser
derives a binding's phase from its syntactic context plus any explicit
phase
keyword; new diagnostics and error recovery for misused keywords are
described
below.
Implementation details for each component:
- Lexer: remove the `:!` (`ColonExclaim`) token, move its virtual
parse-node
budget onto `:`, and add the `generic` and `runtime` keywords.
- Parser: thread a `BindingContext` (`ExplicitParam`, `DeducedParam`, or
`CompileTimeEntityParam`) from declaration introducers down through
parameter
lists to each binding pattern, using a one-token lookahead to
distinguish a
name-qualifier parameter list from a declaration's own final list.
Parameters
of a compile-time entity (`class`, `interface`, `constraint`, `choice`,
`alias`, `export`, `namespace`) and deduced `[]` parameters default to
checked
generic; explicit function parameters and local bindings default to
runtime.
`HandleBindingPattern` resolves the phase from that context plus the
keyword: a
`generic` keyword needs no node of its own (the phase is carried by the
binding's node kind), while a `runtime` keyword is preserved as a
`RuntimeBindingName` node so `check` can name it in a diagnostic. A
phase
keyword that is merely redundant with the contextual default is
diagnosed
here, without invalidating the parse tree.
- Check: a phase keyword that is invalid for its context (for example
`runtime`
on a checked-generic parameter) is diagnosed here, and recovers by
building an
error binding that still introduces the name so that later uses of it do
not
produce cascading errors.
The removed `:!` syntax is now rejected as an ordinary parse error.
The `form`/`:?`/`->?` ("extended types") portion of proposal #7254 is
left for a
separate change.
Assisted-by: Claude Code
This adds SemIR structs and implements building `observe` lists, as well
as naming, formatting, and importing `observe` declarations.
---------
Co-authored-by: Dana Jansens <danakj@orodu.net>
In some cases the pattern block can depend on the initializer, so it
must be sequenced after it. See #7469 for a more detailed explanation of
why this is necessary.
Instead of traversing the entire pattern block looking for
`VarPattern`s, we keep track of them on creation, and then build
`VarStorage`s directly from that list.
This also gets rid of the global `var_storage_map`, and instead keep
that information narrowly scoped to each full-pattern, and consume it in
a single linear traversal instead of with random-access lookups. To
enable that, this fixes a parse bug where nested `var` patterns were
getting diagnosed but not marked as errors.
The bulk of this change is changing most pattern insts to be `Always`
rather than `AlwaysUnique` constants, so that they can be wrapped in
`SpecificConstant`s to perform substitution. That then lets thunking
rely much more on `SpecificConstant` wrappers instead of deep-copying
the inst tree with modified types.
This approach to thunking should scale better, particularly as things
like form generics make function signatures more complex, because we can
leverage the existing support for constant evaluation and substitution.
Unfortunately, applying this approach to binding patterns will require
more work; see the TODO near the top of `thunk.cpp` for details.
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Implements proposal #7016: `self` moves from the deduced implicit list
(`fn F[self: Self]()`) to the front of the explicit list. Its type may
be written explicitly (`fn F(self: Self)`) or omitted, in which case it
defaults to `Self` (`fn F(self)`, `fn F(ref self)`); `self` in the
implicit list is rejected.
Throughout checking, `self` is modeled as the first explicit parameter.
Because a method is just a function whose first parameter is `self`, it
can also be called as an ordinary function with the receiver passed
explicitly (`Type.M(obj, ...)`), not only as `obj.M(...)`. A new
`SemIR::CallArgParamPatterns` helper chooses the parameters matched
against the explicit arguments, excluding a leading `self` only when it
is supplied as a method-call receiver; arity checking, conversion, and
generic deduction use it. The resulting SemIR and lowering are
unchanged: `self` is still `call_param0`, and witnesses, thunks, and
vtables are unaffected.
An omitted `self` type is parsed as a `SelfBindingPattern` node with no
type expression; checking synthesizes the `Self` type so it behaves
exactly like `self: Self`. However, the exact spelling used must match
between a forward declaration and a definition, following #3763's rules
around declaration matching.
Generated functions, thunks, and C++ interop import/export build `self`
as the first explicit parameter, and the `self`-type override (e.g.
Derived->Base for a virtual override) applies to the explicit `self`.
Placement is validated by new diagnostics: `SelfInImplicitParamList`,
`SelfNotFirstParam`, and `SelfOutsideParamList`. The benchmark source
generator and the documentation adopt the `(self)` shorthand; the
prelude, the examples, and the test data are migrated in the following
commits.
Assisted-by: Claude Code with Claude Opus 4.7
---------
Co-authored-by: josh11b <15258583+josh11b@users.noreply.github.com>
Fix import logic to make all imported packages be children of the
`NameScopeId::Package` scope. Previously, indirectly-imported packages
would end up as children of their importing package's scope, which
resulted in them not being treated as packages at all, and in particular
not being fingerprinted as packages.
Fixing that caused a failure in the fingerprinting logic as we started
to encounter packages with no correspoding import scopes. Instead of
looking for import scopes, use a simpler mechanism to map packages to
their package names, and clean up.
Unfortunately the latter change churns all the fingerprints again :(
Hopefully this is the last time for a while.
When we import from another library in the same package, its entities
end up with our library as their parent scope, resulting in cross-file
fingerprint mismatches. Instead, only include the library ID when
fingerprinting either a package-private entity or an `ImportIRId` that
refers to a particular `SemIR::File`.
Fixes link failures when referencing a symbol involving a fingerprint
from a different package.
Previously we included the `Namespace`'s `import_id` as part of its
fingerprint, which caused local and imported namespaces to get different
fingerprints. We now store the `import_id` on the `NameScope` instead of
on the `Namespace` inst to avoid this problem.
Also, when we reach a package-level `NameScopeId`, consistently
fingerprint it as a (package name, library name) pair. Previously the
fingerprinting depended on whether it was imported or not, as an
imported `NameScopeId` had a parent scope (the current package). We need
to include the library name here so that private entities with the same
name in different libraries have different fingerprints.
Insert the cleanup if and when the pending block is inserted, not
eagerly. And if the pending block is inserted by overwriting an existing
instruction, create a cleanup for that instruction rather than for the
instruction in the pending block that we are discarding.
Assisted-by: Gemini via Antigravity
When an initializing expression is used to initialize a var parameter,
we need to create the storage earlier in SemIR than the initializing
expression. To do so, pass a pending block to initialization containing
the var storage.
Also stop using `temporary` for this purpose, since we treat temporaries
as potentially-constant and immutable, but `var` parameters can be
mutated by the callee. We should ideally introduce a new kind of
instruction for this purpose but for now we just use `var_storage`.
Fix some situations where we'd drop the storage argument when building
an in-place initializing expression. We now guarantee that an expression
with the in-place initializing category always has a storage argument.
This is only fixing the decision about *whether* to produce a witness.
Implementation of the witness is still a TODO, though where a body is
generated, it should also precisely reflect where one _needs_ to be
generated.
Note the tests:
- toolchain/lower/testdata/function/generic/import_core_witness.carbon
- toolchain/lower/testdata/function/generic/import_unused_def.carbon
These tests can probably be produced _without_ Core.Destroy, but I found
the essence of them while trying to build //examples with Core.Destroy
and a simpler minimization wasn't striking me.
Assisted-by: Google Antigravity with Gemini
---------
Co-authored-by: jonmeow <jperkins@google.com>
When a `var` is not explicitly given an initializer, initialize it in
one of two ways:
* If its type implements the new interface `Core.Default`, call
`Core.Default.Op` to initialize it.
* Otherwise, if its type implements `UnformedInit`, leave it in an
unformed state. For now, this is always an uninitialized state, but that
will change in the future.
* If neither of those apply, the `var` declaration is ill-formed.
This is a step towards implementing leads decision #6739 and proposals
#257 and #5913.
Assisted-by: Gemini 3.1 Pro via Antigravity
---------
Co-authored-by: Geoff Romer <gromer@google.com>
This is a step toward removing the index from `InitForm`, so that equal
form values always have equal representations.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
This is iterating on how `Destroy.Op` generates, to start adding body
capabilities. This changes the way the signature is created, and adds a
`CoreWitness` function kind so that mangling can prevent name
collisions. The result is that what _was_ `DestroyOp` is now
`Core.Destroy.Op` or, as can be seen in
toolchain/lower/testdata/interop/cpp/nullptr.carbon,
`_COp.<hash>:core.Destroy.Core` where `:core` is indicating that it's a
core witness (taking a note from `:thunk`).
Assisted-by: Google Antigravity with Gemini 3 Flash
Introduces `Context` and `SoftContext` messages, which can be introduced
through a `ContextBuilder`:
- The `Context` messages come before the diagnostic in the output.
- The first `Context` message steals the diagnostic level from the main
diagnostic, and turns the main diagnostic into a Note attached to the
context.
- A `SoftContext` message works similarly, but if it's preceeded by a
`Context` or `SoftContext` message, then it is dropped. This can be used
as a default/backup scope when nothing more interesting is provided up
the stack, such as in `TryEvalBlockForSpecific`.
The `ContextBuilder` is provided to a callback through
`Diagnostics::ContextScope`, an RAII type `AnnotationScope` but for
context messages.
This allows a high level operation to provide a context message like
"failed to identify facet type {0}" which will then be used as the error
if a diagnostic is produced during identification, with the latter
diagnostic attached as a note to explain why the contextual operation
failed.
In particular, this allows monomorphization errors (such as an array
bound being negative) to be attached to a higher lever operation instead
of being top-level diagnostics themselves, with the monomorphization
site being a note. This inverts the source code locations that appear in
the diagnostic, so that the top-level diagnostic points to the "user
code" which causes the monomorphization.
This is presented as an alternative strategy to #6753, which plumbed
diagnoser callbacks around to achieve the same goals.
We replace the diagnoser callbacks in type completion and operators with
ContextScope callbacks instead, which now provide better diagnostics for
monomorphization errors. Other callers to MakeSpecific do not yet have
ContextScopes introduced in order to turn monomorphization errors into
more interesting diagnostics.
This shifts logic a little so that empty top-level scopes are printed
less often. This affects imports mainly for now, but should be expected
to affect the soon-to-be-added generated scope more significantly.
Assisted-by: Google Antigravity with Gemini 3 Flash
Implementation of unused pattern bindings #2022, continued.
Whereas previous PR #6460 took care of parsing, and PR #6479 prepared
the stage by using _ in some test cases, this PR has the the actual
implementation, using a simple dataflow analysis.
---------
Co-authored-by: Burak Emir <bqe@google.com>
Co-authored-by: jonmeow <jperkins@google.com>
Currently each interface has a `Self` facet internally that becomes a
binding to every entity inside the interface: associated constants,
functions, and require decls. Each of these has to be independently
generic as a result. This makes is challenging in extended name lookup
to move into an extended scope of an interface, as we have a specific
for the interface, but the names within require a different specific
that includes a `Self` facet value.
We generalize this relationship by adding a second generic to Interface,
called `generic_with_self`. When we want to work with entities inside
the interface, we move from the interface-without-specific to the
interface-with-self specific by adding a Self to the specific. This is
done independently of any particular entity inside the Interface, as
those entities are now all members of the interface-with-self generic.
Associated constants no longer need a generic of their own, as they do
not have separate generic bindings. Functions retain a generic, but if
the function has no generic arguments, it will have no bindings of its
own now.
Require decls retain a generic so that their specific can be
instantiated separately from the interface. Requiring the interface to
be complete does not require the types in a require decl to be complete
unless it is modified by `extend`. So we allow them to be completed
later by keeping them in a separate generic.
Named constraints look like interfaces and gain the additional inner
generic-with-self, with the same relationship to require decls.
This removes the need for name lookup to perform Substitution of a Self
facet into the extended scope instruction. Instead, the
`SpecificConstant` instruction inserted by a `require` decl is part of
the interface-with-self generic. When looking through a FacetType for
extended scopes, for each interface, we push the scope with the specific
for the interface-with-self. Then the constant value of the
`SpecificConstant` is correctly modified by the provided self
automatically through applying that specific.
The primary change in this PR is to split the `Initializing` expression
category into separate `ReprInitializing` and `InPlaceInitializing`
categories, depending on whether initialization uses the types
initializing representation, or is guaranteed to be in place. It also
rationalizes and documents the SemIR-level semantics of those categories
(including where #5545's "ephemeral entire reference" category will
fit), and introduces two new inst kinds to close gaps exposed in the
process.
Some additional secondary changes:
- Consistently format the storage arguments of initializers with `to`,
regardless of whether initialization is in-place, and document the `to`
notation.
- Rename some inst kinds and functions, and restructure some of the
code, for clarity and consistency with the new documentation.
- Resolve a TODO to handle more category conversions in
`CategoryConverter`, in order to make it easier to reason about category
conversions.
See #6588 and the review history of this PR for background.
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
The key changes are:
- Function output parameters are now prefixed with `out`, and more
consistently formatted as named parameters.
- Function and inst output arguments are now written as part of the inst
form, rather than as one of the inst arguments.
As a drive-by fix, this also changes `Temporary::storage_id` from
`DestInstId` to `InstId`, because it doesn't represent an output
parameter of the `Temporary` inst itself.
See the review of
[#6532](https://github.com/carbon-language/carbon-lang/pull/6532) and
[this Discord
discussion](https://discord.com/channels/655572317891461132/999638000126394370/1458268977020141589)
for additional background.
Also clarify and enforce that `ConversionTarget::init_id` is used only
as storage for in-place initialization, and correspondingly rename it to
`storage_id`.
Not all functions have a return slot, and once we have composite forms,
functions will be able to have any number of return slots. Obtaining a
unique return slot for a function only makes sense in `returned var`
handling.
The main changes here are:
- Introducing `InitForm` and `RefForm` to represent initializing and
reference forms (the two return forms currently supported by the
parser).
- Introducing the `FormType` singleton inst to represent their type
(i.e. `Core.Form`).
- Emitting an inst representing a function's declared return form as
part of handling the function signature.
The return form inst is currently ignored. Subsequent PRs will expose it
in `SemIR::Function` and use it to determine the form of call
expressions.
Pursuant to recent decisions on #6124, switch `Destroy` to use a
`CustomWitness` for its implementation. Right now this is manufacturing
no-op implementation functions on each lookup, which obviously isn't
ideal but is intended as a first pass. I'm mostly trying to find the
right balance between updating the approach to reflect new decisions,
while still breaking apart work in a way.
The `CoreInterface` logic is intended to build on `CoreIdentifier`
support. We have a number of additional interfaces that require
specialized logic, and that'll extend pretty far with C++ interop, so it
seemed easiest to have a generic function for it. That's what's
replacing the logic inside C++ interop that was doing string comparisons
(which could have already been moved to `CoreIdentifier`, I just missed
it in my first pass).
This adds `CustomWitness` support because the `Destroy` witnesses can be
imported cross-file. `CustomWitness` was previously only used for C++
types, which don't yet support import, which is why that wasn't
previously an issue. The addition of `query_specific_interface_id` is
similarly needed in order to get correct sorting of witness blocks when
imported.
This PR also removes builtin constraint logic (note this is in a
separate commit to help review; it's not a separate PR because it's
difficult to split apart without tests breaking). This had been made
generic with the expectation that destroy, copy, move, and conversions
would all need related support. Under the new decision, we are not going
to do blanket impls and will instead just manufacture a `CustomWitness`
for everything.
A lot of SemIR fingerprints change, but that's probably because the
addition of `Destroy` on core classes is yielding structural changes.
Instead of naming the root namespace `package` (because it's accessed by
the `package` keyword), change it to use the current package name. Note,
buried in the checksum changes,
`toolchain/check/testdata/package_expr/fail_not_found.carbon`:
```
- // CHECK:STDERR: fail_not_found.carbon:[[@LINE+4]]:16: error: member name `x` not found in `package` [MemberNameNotFoundInInstScope]
+ // CHECK:STDERR: fail_not_found.carbon:[[@LINE+4]]:16: error: member name `x` not found in `Main` [MemberNameNotFoundInInstScope]
```
for:
```
// CHECK:STDERR: var y: i32 = package.x;
// CHECK:STDERR: ^~~~~~~~~
```
I'll leave it to you if you prefer this; the alternative I see is to
just rename `IsCorePackage` to `IsImportedCorePackage`, and/or change it
to a helper that takes a `Context` and does the right thing with
`parse_tree` (which, I need for `Destroy`-related reasons and was my
default approach).
This is a prerequisite for support for interop with C++ template names.
No behavior change here, except that it sadly changes the fingerprinting
for a lot of tests.
Give TupleLiteral and StructLiteral a constant value, if their contents
have constant values. Their constant values are TupleValue and
StructValue respectively. This supports their ability to convert to a
constant type (or facet type).
This way when deduce finds a TupleLiteral as the argument to a
_symbolic_ facet type, it can also find a constant value to use for that
argument. This allows deduction to move onto step two, where it can
substitute into the symbolic parameter from previous deduced arguments,
and then perform the conversion from the TupleValue to the desired facet
type.
Allow `PerformBuiltinConversion()` to convert from a canonical
TupleValue or StructValue to `type` instead of only from literals. Then,
also support conversion from a symbolic binding of type TupleType or
StructType to `type`.
Richard Smith
Geoff Romer
Christopher Di BellaandRichard Smith
Chandler Carruth
Özgür T. ÖnsoyandDana Jansens
Jon Ross-Perkinsandjonmeow
Nicholas Bishop
