Per recent discussion, in `... where .A = B`, require that `B` is implicitly convertible to the type of `A` immediately, rather than treating that as part of the criteria that a type must satisfy to satisfy the resulting constraint. Extend the implementation of implicit conversion so that conversion of a type to a constraint checks that the type satisfies the constraint.
As part of implementing this, stop duplicating rewrite constraints as equality constraints. Instead, when checking that a constraint is satisfied, check both its equality constraints and its rewrite constraints. This fixes an infinite recursion that would otherwise be caused by this change, and is also a necessary prerequisite for applying rewrite constraints to equality constraints, where we would otherwise collapse the implied equality constraints to a tautological `V == V` constraint.
In passing, make ErrorBuilder support building the error message more incrementally and use that to improve diagnostics for mismatched values with equality constraints.
We don't seem to have any need for `TypeOf*Type` types, and having them introduces the temptation to use them during type-checking, which would lead to types having different behavior when their type-of-type is `Type` versus when it's a more precise type. Remove these types for now.
If we later decide that we want each type literal to have a unique type, as we do for value literals, we can introduce a single value kind for that rather than one for each kind of type.
No changes to `TypeOfMemberName`, `TypeOfParameterizedEntityName`, and `TypeOfMixinPseudoType`, which are placeholders, not real types.
In particular, if we find the name of an interface after `is`, it should
be exapnded to a constraint, including any implied constraints such as
extended interfaces, rather than forming a constraint requiring only
that interface in isolation.
Add checking that a type only satisfies a constraint if it satisfies all of that constraint's equality and rewrite constraints.
Enforce the rule that `=` must be used in impls when specifying associated constant values rather than `==`.
Turn off the pre-#2173 single-step equality behavior. This is getting somewhat ahead of the approved design, but it's a one-line change to restore the old behavior.
Fix `CARBON_CHECK` to handle top-level `,`s in its argument, such as may happen in template argument lists, as this change introduces such a check.
There are lots of ways a declaration can be used before we have the information necessary to handle that use. Issue diagnostics for these.
Interleave declaration and type-checking of global declarations so that declaring a later declaration can depend on the results of type-checking an earlier one.
Incorporates tests added in #2266.
Fixes#1394, fixes#1395, fixes#1396.
Co-authored-by: pmqtt <51272730+pmqtt@users.noreply.github.com>
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Adds a simple script to merge stdout/stderr and put on labels. This is hidden to the RUN line using lit.cfg.py.
This is my solution to addressing how errors printed by the toolchain break sorting of stdout output; just put stdout first. We could also have toggles for interleaving output or such, which might help test whether we do it properly.
This also moves some previous-distributed replacement logic into lit_autoupdate_base.py: I think having that adjacent to lit.cfg.py is probably the better choice, and it reduces duplication in toolchain scripts. It happens here because I need to change the resulting commands to include the merge.
This change left a test broken and removed a fair amount of test coverage for unrelated features, and after further discussion it's not clear that this is the direction we want to go in.
This reverts commit 6cf2272bbe.
I've refactored the script in order to make it work in more contexts, which is why the delta is lost. I've actually refactored a significant amount with the intent of making the logic easier to understand, because I was also adjusting bits of it.
Some key notes:
- Removes the multi-pass update that was dealing with unfixed line numbers in explorer (I think the current script should work in one pass)
- Fixed explorer to handle multiple line numbers on the same line (turns out we can rely on local format for line numbers).
- Using execv instead of imports because making Python imports work in a setup like this feels like it's not worth it; only a nuisance.
- Adding __init__.py to satisfy mypy, which otherwise considers the lit_autoupdate.py scripts to be issues.
- Using py because I was thinking sh would be more platform-dependent. py should port better to Windows.
- Getting rid of [[ID#]] capture groups in the semantics-ir tests because with the autoupdate it's kind of moot (also, hard to autogenerate the pairs without relying on the %### value).
Note this does mean tests switch to more of a "make a change, see which tests change" setup. I don't know that that's a _bad_ thing though -- it's pretty much how tests are being written right now, which is why I went down this rabbit hole. It's a nuisance to make a change then _manually_ have to update a bunch of code.
My intent is to use this for to convert parse-tree tests to lit, but I wanted to do this with _existing_ tests first as a proof of concept and to make sure there's agreement.
Implements basic support for rewrite constraints as proposed in #2173.
Support for associated constants and complex constraints in general is also made more robust: argument deduction now properly computes and substitutes witnesses, and interface declarations track a more correct description of the constraint that they introduce than the one we previously built.
Change explorer's handling of witnesses to track them wherever possible. Associated constant support needs witnesses to be available much more pervasively.
The main changes here are:
- `Substitute` now takes a set of bindings covering both `Value`s for `GenericBinding`s and `Witness`es for `ImplBinding`s, and substitutes both.
- Witnesses are now tracked within `ConstraintType`s. The `.Self` type has an `ImplBinding` that self-references from parts of the constraint to other parts of the constraint can use to access the witness for the constraint.
- The constraint type for an `impl` and for a `GenericBinding` are now stored in pre-substituted form, with references to the actual constrained type rather than symbolic references to `.Self`. This results in minor changes in diagnostic text.
Argument deduction still performs substitutions without remapping witnesses.
On #2224 @zygoloid pointed out we needed --implicit-check-not to ensure we were correctly matching output. This is the standard way we're writing explorer tests, so I was looking at unifying our lit approaches.
This is one take on it, making more use of substitutions to bring various testing into alignment, as well as symlinks to avoid config skew (maybe I'll eventually figure out a better solution than symlinks).
Makes a couple small fixes in explorer to remove end-of-line whitespace on output.
* Multiplication and division have the same priority.
* A new builtin interface DivWith is added.
* In some tests expecting a compilation error (syntax error), the error
message now says it is expecting SLASH or binary *.
When checking for control flow falling off a function after a `match`, determine whether it's possible for no case to have matched. Using the same implementation, also detect whether `case`s in a `match` are unreachable.
For now, the implementation never considers a match against specific values for any type other than tuples, alternatives, and `bool` to be exhaustive. In particular, matching against the sole value `{}` of type `{}` is not considered exhaustive. This is probably best left until explorer supports matching on struct and maybe class types more generally.
This implementation closely follows the algorithm described in the paper [Warnings for pattern matching](http://moscova.inria.fr/~maranget/papers/warn/warn.pdf) by Luc Maranget. Various optimizations are possible, such as reducing the amount of copying done, but for the purposes of explorer, comprehensibility is being favored over efficiency.
The problem is, perhaps surprisingly, co-NP-hard (by reduction to the tautology problem for disjunctive normal form, which is in turn dual to the satisfaction problem for conjunctive normal form, which is well-known to be NP-hard). The algorithm is therefore exponential-time in the worst case, but seems to be well-studied and performs well enough on non-pathological examples. Nonetheless, a depth limit has been imposed to prevent pathological examples such as those generated by a fuzzer from causing long runtimes.
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
* Replay changes from pre-force-push mixin branch
* Base MixinPseudoType off of the new InterfaceType
* Add more test cases.
Also removed an unnecessary check that would have already been
handled by the parser.
* WIP detect member clashes during mixing mixins
* Implement fuzzer changes
* Implement member name clash check when mixing mixins
* Modify parser and lexer for experimental mixin feature
* Add comments
* Update explorer/testdata/mixin/simple-mix-in-mixin.carbon
Co-authored-by: josh11b <josh11b@users.noreply.github.com>
* Update explorer/testdata/mixin/use-mixin-method-in-class-method.carbon
Co-authored-by: josh11b <josh11b@users.noreply.github.com>
* Make code review changes
Co-authored-by: josh11b <josh11b@users.noreply.github.com>
- Added detection of unformed usage with `return var`, control-flow statements and member access.
- Refactored the work flow: made flow facts a class and moved operations of flow facts into the class.
- Added, cleaned and renamed test cases. Some test cases for the dynamic unformed check were suppressed by the static check. They are now added back.
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
The most significant change here is that explorer now uses the chosen spelling
rather than the old `Bool` spelling. Also update a few documentation examples
and some skeletal design docs to use the chosen spelling.
- An introprocedural forward analysis that checks the may-be-formed states on local variables.
- Returns compilation error on usage of must-be-unformed variables.
- Implemented as a pass of `ASTNode` traversal.
- Currently supports detection of: function parameter, return expression and rhs of assign.
Provides a first implementation iteration towards class prefix and extension, along with user-friendly error regarding missing implementation for #1881
**Explorer behavior**
For class prefix `base` and `abstract`:
```
Class prefixes `base` and `abstract` are not supported yet
```
For extension with `extends`:
```
Class extension with `extends` is not supported yet
```
**Motivation**
* Provides user-friendly error for these unsupported features
* First implementation increment in supporting class prefix and extension.
Auto-update tries to add `CHECK: Nice!` or `CHECK: HALLO WELT` to the test case. As what's being printed is non-deterministic, the auto-update should be disabled.
Following #1191, add initial support for bitwise operators. Support for both
integer operations and for operator overloading via the interfaces specified in
#1191 is provided.
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Adrien Leravat
Richard Smith
Jon Ross-Perkins
micttyl
Junhee Cho
Darshal Shettyandjosh11b
pk19604014
Vineeth B V
Zenong Zhang