Adds a `LazyImportRef` instruction. Versus `CrossRef`, this is intended
to represent an instruction which cannot be used directly, and must be
replaced when it comes up due to name lookup. The intent is to use this
to avoid recursive loading of imported IR instructions.
Note, under this model, when `ResolveIfLazyImportRef` is called, it
essentially needs to load both inst and type information to a sufficient
point where any further attempts would hit name lookup again. That will
probably be complex, and the current implementation is just touching the
surface of the issue. I was heading down this route because it would
mean we have a limited number of points that need to consider whether
they're going to talk about a `LazyImportRef`.
I'm considering whether `CrossRef` should be dropped in favor of more
specific `Builtin` special-casing, due to the divergence of desired
behaviors. This could mean dropping the `builtins` IR since it's not
looking useful right now.
Modify `NameScope` to track whether the scope is associated with a load
error. This is to handle cases where one or more imports failed, so we
do not want to issue warnings for related scopes.
The 0-size on `ValueStore` comes up due to the changes to `NameScope`,
which make it too large for the default handling. After discussion with
zygoloid, the thought was we might want to try reserving a roughly
correct value based on parse node counts, but the stack default wasn't
buying much.
Fixes a bug where the implicit import used the package name instead of
the invalid identifier.
This is enough to support calling methods that take a `Base` or `Base*`
as their `self`. But name lookup doesn't look in the base class yet, so
base class methods aren't actually found.
BinaryOperatorAdd had been added early on as a proof-of-concept for
toolchain design for parsing -> checking flow. However, it doesn't
reflect the interface direction for operators, and now other portions of
the toolchain demonstrate the relevant logic. Instead, it's just a bit
of an outlier versus other instructions which have evolved over time.
In theory because none are allowed. This is to improve consistency in
handle_decl_name_scope's modifier handling, removing the namespace
special-case.
I noticed there's a crash bug on `impl <declaration>` which I'll address
separately.
This builds on #3461.
Most of the calls to `StringifyType` already passed `true` for
`in_type_context`. Checking the rest, I found that every one of them was
already sufficiently clear that they were printing a type, or could be
made so with a very small change to the diagnostic text.
This creates a namespace for `package` scope.
It looks like names of class_decls in namespaces lead to an unexpected
instref. This is already true, as best as I can tell. I'm not sure if
there's a preferred approach to address that, so I've left a TODO for
now.
This removes the filename from the file-scoped block, and places it
above to make it clear where the full SemIR begins (with multifile,
providing a barrier between).
I was suggesting this because `FloatingPoint` is pretty long. `int` and
`float` should be familiar abbreviations. `unsigned` should be familiar
to developers too, but `UnsignedInt` still feels usefully clearer for
the additional chars.
This adds instructions so that we get printing. I may adjust the
instruction format a little further to add a type, but I think the basic
setup will remain.
Note this builds on #3414
This is an incremental improvement on our diagnostic messages that
simply underlines an entire token if the token is larger than 1 char
(else it points to the single char with a caret like it used to).
This should cover:
```
library "lib" api;
import Foo library default;
import library default;
import library "lib";
```
This splits out `PackageName` and `LibraryName` to their own parse nodes
so that checking can ignore them and still get a balanced parse tree
(otherwise, we essentially need to implement handling of the parse nodes
only to remove the identifiers/string literals -- the optional names
mean we can't blindly do that as before). For reference, these nodes
don't need to be handled because CheckParseTree will need to directly
funnel import information along with checked IRs.
A struct with the same member name twice can cause a `CARBON_CHECK`
failure later when it is used (problem found by fuzzing).
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
As I was working on this, I noticed `import` and `library` syntax needs
to be fixed for how it imports the current package, and for `Main`
libraries. This mostly reflects the current state in its testing.
Otherwise, this should handle most of the errors I could think of:
dependency cycles, redundant imports, etc.
It does not actually deal with the nuances of cross-IR references.
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
For now, we require the same introducer to be used each time a class is
declared, but see #3384.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Implement toolchain support for `returned var` and `return var`.
- Modeled `returned` in the parse tree as a `ReturnedSpecifier`
appearing after the `VariableIntroducer`.
- Modeled `return var` in the parse tree as a `ReturnVarSpecifier`
appearing after the `ReturnStatementStart`.
- Factored out the implementation of `return` statement and `returned
var` handling in check into a new `return.{h,cpp}`. The parse nodes
themselves are still handled in `handle_*.cpp`. This allows easy code
reuse between `return` and `returned var`.
Instead of ad-hoc conversion tracking on some kinds of nodes that
conversion creates, consolidate tracking into a single node kind. This
frees up an operand on `Init` instructions that can be used to store the
destination.
Add a `NameId` that is effectively just a wrapper around a `StringId`,
with
some additional predefined values for names that don't correspond to
strings, such as the name of `self` or the function's return slot.
Another issue found while trying to make `package` work, lurking in
fuzzer inputs. This leaves TODOs because we probably do want to support
this, it's just non-trivial to fix.
This turns out to somewhat block `package` support because there's a
fuzzer test-case that does similar. The parse is valid so we should
probably handle it reasonably.
I suspect the `let` test case might work with a little effort, given it
shouldn't really require much evaluation. On the other hand, `var`
definitely shouldn't, and `fn` will probably require something like
`constexpr` plus more substantial compile-time evaluation support.
When declaring a name such as `fn Ns.Class.F() { ... }`, enter the
scopes of `Ns` and `Ns.Class` as we form the name, and remain in those
non-lexical scopes until the end of the declaration.
When performing an unqualified lookup, look in any enclosing non-lexical
scopes in addition to looking into the lexical name table.
We now track a scope index with each lookup result in the lexical name
lookup table. This is used to determine whether a lexical or non-lexcial
result is the innermost result and whether a declared name is in the
same scope as some previous introduction of that name or in a nested
scope. For now, this could just be the index into the scope_stack, but
the intent is to also use this to detect names being declared after they
are first looked up, which requires the indexes to outlive their scopes,
so we use a persistent numbering of all scopes instead. The persistent
numbering also permits more invariant checking.
Following up on discussion yesterday regarding this split.
Note, I'm expecting #3341 to do IdentifierId -> NameId in SemIR. It
might be worth adding NameId creation directly to StringStore if you're
content with this setup though.
Per the design, field access into a class value expression is a value
expression, even though we could produce an ephemeral reference
expression instead and avoid performing a value binding. This slightly
pessimizes class member access in some cases, but we should be able to
restore the old generated code by deferring actually performing the
value binding until a value expression is needed.
The value in the name lookup table is the class declaration. Map it to
the class type when it's found by lookup in an expression. This differs
from the behavior in a declaration name, where we want to find the class
declaration itself.
Advantages:
- Allows lexing/parsing in parallel, since they are modifying fully
separate ValueStores.
- Allows SemIR to reliably be stored hermetically.
Disadvantages:
- Creates overlapping storage of duplicate strings when multiple files
are compiled together.
- Prevents Ids from being uniquely compared cross-file.
Per discussion, the decision is that the advantages are more important.
The looser ownership remains because both SemIR checking and
metaprogramming may still generate things we would want to deduplicate.
It would be somewhat odd if TokenizedBuffer owned something that
checking modified.
If the initializing representation is the same as the value
representation, don't materialize a temporary and perform a value
binding. Instead, directly extract the value, using a new
`value_of_initializer` node.
This removes a lot of redundant `alloca`s from our generated LLVM IR.
I'm looking at this due to the conversation on #3341. Although
diagnostics aren't where they should be, I thought it may help to start
adding raw identifier support (which may also help show how I was
thinking about this).
Note regarding the TODO on how to form the token, `GetTokenText` returns
the `string_id`'s reference value for an `Identifier`. So to make
`GetTokenText` work in a way that returns `r#foo` for a raw identifier,
I think there are a few options:
1. Add additional data indicating the end of the identifier.
2. Add `RawIdentifier` as a token kind to indicate that it's raw and
should be prefixed with `r#` (but also giving later stages one more
token kind to handle)
3. Make the `string_id` correspond to `r#foo`, and have later stages add
`foo` to the strings table whenever `r#foo` is encountered (with map
lookups leading to deduplication).
4. Add `StringId::RawKeyword` special values for each keyword.
- This would mean `self` prints as `self`, `r#self` prints as `r#self`,
but `r#foo` is not a keyword so prints as `foo`.
- This means keywords would need to be listed in a place `StringId` can
depend on them, one way or the other (e.g., a `keywords.def` file in
`base/` should work).
5. Say that it _is_ an `Identifier`, and if it's a keyword spelling, it
must have been a raw identifier.
- Same limitation as above: This would mean `self` prints as `self`,
`r#self` prints as `r#self`, but `r#foo` is not a keyword so prints as
`foo`.
I'm hoping to resolve this issue separately though. :)