This was previously discussed at
https://discord.com/channels/655572317891461132/655578254970716160/1209975051588210729.
I'm initiating this mainly because we typically use "id" suffixes to
indicate an `IdBase` being passed around and the non-id suffix of
`parse_node` suggests at it carrying more data than it actually does.
There used to be more reason for avoiding `node_id` because
`SemIR::InstId` used to be named `NodeId`, but that's no longer
necessary. As a consequence, I'd like to rename `parse_node` to more
precisely reflect its type.
In full, this is doing:
```
parse_node_kind -> node_kind
parse_node -> node_id
ParseNodeCategory -> NodeCategory
ParseNodeKind -> NodeKind
ParseNode -> NodeId
```
This is primarily in check and sem_ir, but with some `parse_node_kind`
references in parse too.
Pluralization is consistent with name forms on both sides, so that
wasn't part of my replacements.
This doesn't add full support. I'm separating it out to make the effects
of the modifier changes clearer for review. I'm restructuring a little
with the expectation that we'll have some more categories of modifier
keywords in the future (similar to `extern`, these may not be in a "set"
such as access), and thus easily scaling up to a few more would be
useful.
This undoes parts of #3515 in order to allow PushGlobalInit to be called
when the initializer is called, instead of at the end of the binding
pattern. The current approach is fragile because supported patterns will
become more complex. We also will likely want similar support in `let`,
which puts the initializer first, so this offers a consistent approach
for both.
[Looking
back](https://discord.com/channels/655572317891461132/655578254970716160/1184237511766179840),
this is more or less the second option in that message, but using the
PeekNextIs to avoid vagueness about what's being popped first.
Note I'm putting in PeekNextIs for what I'm hoping will be a pretty
narrow use-case. I could've added depth arguments to the Peek functions,
but that would've rippled through a number of APIs and it's not clear to
me that this has generic utility. I mean, right now it could just be
PeekNextIsVariableInitializer, since it's only optional in that case.
`GlobalInit` block is now static block within a `SemIR` which will be
used to emit initialization instructions for variables in the `Package`
scope.
inst_block_stack now has additional methods to handle `GlobalInit` block
separately, this block can be popped without being finalized allowing to
accumulate between all instances of variables.
At the end of the `check` phase, if this block is not empty , the
function `__global_init` will be added with this block being inserted
into it.
This block is pushed to `inst_block_scope` at the end `BindName`,
allowing instruction to be emitted into it, then popped at the semicolon
(VariableDecl).
This significantly changes the `SemIR` output, that's why this commit
updates a lot of the test cases.
Previously, we created scopes for implicit parameter lists and tuple
patterns, but that meant that bindings went out of scope too soon. We
now keep them in scope until the end of the enclosing declaration. This
is accomplished by pushing a scope for parameters when we handle a name
that might have them, and then popping the scope again if it turns out
that there were no parameters.
For a case such as:
```carbon
fn A(T:! type).B(U:! type).F(x: T, y: U) {
var z: T;
}
```
... we now have the following scopes in the stack:
- A parameter scope containing `T`.
- A class scope for `A(T:! type)`.
- A parameter scope containing `U`.
- A class scope for `A(T:! type).B(U:! type)`.
- A parameter scope containing `x: T` and `y: U`.
- A function body scope containing `z: T`.
The innermost scope when check processes a declaration of a function,
class, or similar is now often a parameter scope rather than the
enclosing scope in which the class or function is declared, so the
target scope is now passed explicitly into the modifier checking code
that wants to inspect that enclosing scope.
This required adding a few headers that were found transitively before,
but not too many. This is sadly a fairly manual process of opening every
file in my IDE, but I think I got everything in `//common` and
`//toolchain`.
There are a few cases where technically we don't need `foo.h` to be
included into `foo.cpp`, but I've forced those to stay with a pragma.
I've tried to catch the places where we can cut deps in Bazel as well,
but not sure I got all of those.
I had been noticing these in other PRs and it seemed better to isolate
the change.
Do not create runtime name bindings for `FieldDecl`s even though they're
declared with `:`, so that we can still constant-evaluate references to
fields.
The parse nodes are still tracked as part of the same value store
interface in order to ensure parity, but they're split out from Inst
itself in order to reduce the size of Inst -- the expectation is that
they don't need to be passed around quite as much.
This change doesn't actually reduce the passing very much, although
there are hints of it: AddInstAndPush doesn't typically need a separate
parse node from the one on the Inst itself, for example. In a couple
spots I changed code to rely a little more on the InstId until the
ParseNode is needed, but it's very low hanging fruit where done. I think
convert could do more to not eagerly fetch the parse node before its
use, but more cleanup felt it would be easier to handle separately. I'm
currently viewing this as making such cleanup _possible_ rather than
executing on it up-front.
But also, I want to make sure there's a consensus to head in this
direction before pulling the trigger. We speculated that this would
result in the parse node being passed around less, and I do think that's
the case, although it's a bit fuzzy in the change.
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Also stop supporting `var` with initializer inside `for`.
Resolves TODO in `handle_variable.cpp`
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
This change adds a `BindSymbolicName` instruction for generic bindings,
paralleling the existing `BindName`. A mechanism is also added to allow
both kinds of binding to be accessed uniformly, for convenience in the
case where the two different kinds of binding are treated the same.
Generic bindings of type `type` are allowed to be used as types,
although no operations are provided for such types. For now lowering
treats these types as empty structs, which seems like a reasonable
lowering for non-monomorphized unconstrained types.
This is a step towards adding enclosing scopes for imports. It creates
an indirection for all bind names.
We discussed specializing for bindings that are in function scope (i.e.,
not a useful enclosing scope for imports or diagnostics). However, the
thought is to go ahead with this singular approach for now, and only
change structure if it's a performance issues so that we have
incrementally fewer instructions to handle.
Goal is to increase type safety, though more work needs to be done (see
added TODOs).
Note that, after this change, check handlers corresponding to deleted
parse node kinds will no longer compile.
---------
Co-authored-by: Chandler Carruth <chandlerc@gmail.com>
For now, we require the same introducer to be used each time a class is
declared, but see #3384.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Implement toolchain support for `returned var` and `return var`.
- Modeled `returned` in the parse tree as a `ReturnedSpecifier`
appearing after the `VariableIntroducer`.
- Modeled `return var` in the parse tree as a `ReturnVarSpecifier`
appearing after the `ReturnStatementStart`.
- Factored out the implementation of `return` statement and `returned
var` handling in check into a new `return.{h,cpp}`. The parse nodes
themselves are still handled in `handle_*.cpp`. This allows easy code
reuse between `return` and `returned var`.
This replaces the use of `VarStorage` in this case.
Add an `UnboundFieldType` type as the type of a field, in cases where
it's referenced without an accompanying object.
Add a `BindName` node to describe the name binding performed for both
variables and fields so that we can handle them more uniformly.
1. In general, `semantics_ir` -> `sem_ir`, to match the directory name.
2. For the list of `ValueStore`-related accessors on `SemIR::File`, add
them to `check`'s `Context` object, shortening access.
Finishing what #3316 started, add more bespoke ValueStore-like
structures to File. With this, the things which previously had somewhat
boilerplate Add/Get functions are now all on side classes, giving a
uniform style of API for calling.
Note, I was on the fence about making things public on ValueStore. If
it's preferred that I make some things there protected I certainly can,
there's just a trade-off that may mean more distinct child/wrapper
types.
Split `node.h` into separate files for ID types (`id.h`) and for typed
nodes (`typed_nodes.h`). The per-node-kind data is now specified as part
of declaring the typed nodes, and is removed from the node kinds
x-macros, which now simply enumerate the node kinds.
Replace `SemIR::Node::GetAsFoo` and `SemIR::Node::Foo::Make` with
`SemIR::Foo` class that represents a particular kind of node, with named
fields.
Rename `SemIR::IntegerLiteral` and `SemIR::RealLiteral` to
`IntegerValue` / `RealValue` to better reflect their purpose and avoid a
name collision with the corresponding `SemIR` node kinds.
Remove `NodeKind::Invalid` and the `SemIR::Node` default constructor
entirely, as they were not used for anything.
Combine the initialization, implicit conversion, and value category
conversion functions into a single function.
This substantially reduces the duplication between these steps, and
ensures that we support the same set of conversions in all these
contexts. This also fixes some issues where we would not use the proper
value representation for tuples and structs after performing implicit
conversions.
Continuing along with #3070. Note this is just a file rename, with BUILD
edits; every file previously in semantics/ should show as moved (except
maybe BUILDs, which split).
Jon Ross-Perkins
Gıyaseddin Tanrıkulu
Richard Smith
Chandler Carruth
Geoff RomerandRichard Smith
josh11bandChandler Carruth