This gives a slightly simpler representation for `UnboundElementType`s
in eval blocks, and in principle allows us to preserve the spelling of a
field's type into the `UnboundElementType` and thereby into a field
reference, although as of right now this doesn't affect our diagnostic
output in any way.
During error recovery for a field with a non-concrete type, preserve the
type in the `UnboundElementType` regardless. It's not really problematic
to have a non-concrete type there, and this makes it easier to track the
instruction used to specify the type.
This is a step towards switching symbolic types to always be abstract
during type checking.
For each kind of instruction, specify whether its constant evaluation
needs an `InstId` or not. If it does, ensure that all constant
evaluation of that instruction provides one. Otherwise, allow calling
into the evaluator without providing an `InstId`.
This allows us to reliably use the `InstId` in evaluation steps that
either need a location or need to look at the original operands of the
instruction prior to evaluation, and also to support `TryEvalInst` calls
safely for instructions whose evaluation does not need an `InstId`.
Instead of storing a `TypeId` that always refer to a facet type that
always contains exactly a single interface, store the interface
directly.
Also improve stringification of `LookupImplWitness` and witness access
into it, switching to using newly-added functionality for stringifying
specific interfaces.
Perhaps we will disallow member lookup on and conversion of runtime
facet values. For now, leave a TODO and produce a TODO diagnostic
instead of crashing.
Related to #5241.
Reduce usage of `GetConstantInSpecific` to a single caller in constant
evaluation, with a TODO to remove that.
This gets us closer to being able to fully perform type-checking against
abstract types instead of types anchored within a particular generic.
Fixes#5186
With @zygoloid's kind assistance, this generalizes the existing
non-const lowering of ClassInit, that had previously only handled
InitializeFrom, to find other cases - such as a nested ClassInit used to
initialize a class member.
This refactors the `FindReturnSlotArgForInitializer` from
`check/convert.cpp` into `sem_ir/file.{h,cpp}` for use from lowering
(since lower doesn't depend on check, which I assume is an intentional
layering constraint - so figured it made sense to move it to sem_ir, and
found one or two similar-ish utility functions in `sem_ir/file.{h,cpp}`,
so figured that was a good spot)
What this does:
- Adds tracking where storage is allocated.
- Determines if that storage supports destruction and, if so, records
the `destroy` function for it.
- Calls any found `destroy` functions when going out-of-scope.
What this does not do:
- Precise scope tracking of temporaries. We currently don't define
temporary scopes, which would probably be the solution.
- Destruction for anything but a `class` with `fn destroy`, in an
implicit return. That excludes:
- Classes with members that need destruction, particularly in the
absence of `fn destroy`.
- Structs, tuples, and arrays.
- Explicit returns, break, continue, nested scopes.
Noting the exclusions in particular, I think those will need work to
support, but this should set the right framework.
The cleanup block concept stems from clang and trying to share code
across cleanups, from discussion with chandlerc. Note in this
implementation I try to find `destroy` functions early on: that's so
that, when destruction is present on multiple paths, particularly
non-shared paths, we only bind the `destroy` method once.
Implementation-wise, I'll note this adds a `has_cleanup` flag to
`TemporaryStorage` and `VarStorage`. There are several related options,
but this felt similar to other information we're trying to track on
instructions. My goal with this is to mitigate the chance of accidental
calls where the storage may not be tracked for destruction. Alternatives
I considered were to not add the flag (I was worried about heightened
risk of errors), or to just add a concept for the relevant `requires`
(which just felt inconsistent).
Cleanup logic ends up in control_flow in this change because I thought
it was a reasonably consistent place for the cleanup block concept and
its pretty direct control flow interactions.
Resolves TODO by creating new function `GetAssociatedValue` with the
logic from `PerformCompoundMemberAccess` restricted to the
non-instance-binding case.
---------
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
This required allowing incomplete facet types where previously
completeness was required. Once we support named constraints, we will
need a way to consistently go from an interface to a facet type witness
index without requiring the interface to be complete in these cases.
---------
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
A query facet type may contain multiple required interfaces, in which
case impl lookup should return an ImplWitness for an impl that is used
for each interface in the query. We bundle these together into an
instruction block and return that from impl lookup. The witnesses are in
the same order as the interfaces in the
`CompleteFacetType::required_interfaces`. This allows walking the
`required_interfaces` to find an interface to give an index that can
also be used to grab a witness from this set, or from FacetValue.
FacetValue now has an InstBlockId for the set of witnesses of the
FacetType, instead of a single ImplWitness instruction id.
FacetAccessWitness includes the index of the witness (determined from
the position in `required_interfaces`) of the witness it's accessing
from the FacetType.
The
toolchain/check/testdata/facet/no_prelude/fail_todo_call_combined_impl_witness.carbon
test demonstrates the fix in the resulting SemIR. We can see the calls
to methods on a multi-interface FacetType result in a FacetAccessWitness
with an index of the correct interface, and this results in a witness
that leads to the correct impl's function.
There is a TODO in member access, where it does not have a
`CompleteFacetType` yet, so it uses the index in
`FacetTypeInfo::impls_constraints` instead, but this can be incorrect in
the presence of named constraints, which when completed can add more
interfaces to the `CompleteFacetType` and which are sorted into an
arbitrary order with the rest there.
---------
Co-authored-by: josh11b <15258583+josh11b@users.noreply.github.com>
Implements the rule:
> For compound member access `a.(b)` where `b` names a _non-instance_
member of an interface `I`:
> * `a` is implicitly converted to `I`
> * let `T` be the result of symbolically evaluating the converted
expression
> * `impl` lookup is performed for `T as I`.
>
> Instance binding is never performed.
See
https://docs.carbon-lang.dev/docs/design/expressions/member_access.html#impl-lookup-for-compound-member-access.
Before this PR, non-instance members were treated as instance members.
---------
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
* `IsInstanceMethod` can look in the function's `self_param_id` instead
of iterating through all of the implicit parameter patterns.
* An associated entity is always associated with a single interface, so
we don't need to handle the case when it isn't.
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
The name scope lookup and member name lookup both need to handle the
case where the base inst is a FacetAccessType. Then we move from the
FacetAccessType to the FacetType which is the type of the instruction
inside the FacetAccessType.
We do name lookup on FacetType already, so "unwrapping" the
FacetAccessType to the FacetType just makes use of that path. Similarly
we do member access on FacetType already, so we can reuse that codepath
with the FacetType found in the FacetAccessType.
There aren't remaining uses on `Context` other than `DiagnosticEmitter`
itself. I'm adding `SemIRLoc` because I feel odd about having both
`Carbon::Check::DiagnosticBuilder` and
`Carbon::DiagnosticEmitter<T>::DiagnosticBuilder`, but it seems
relatively little additional typing outside the handful of
`DiagnosticEmitter` uses on `Context` itself:
```
Context::DiagnosticEmitter
DiagnosticEmitter<SemIRLoc>
Context::DiagnosticBuilder
SemIRLocDiagnosticBuilder
Context::BuildDiagnosticFn
BuildSemIRLocDiagnosticFn
```
Also clean up #include's while I'm finishing here.
This in particular uses free functions because it's likely to end up
more consistent with types (versus a wrapper object for InstStore).
Note, this is unlikely to have a performance impact, but if it does, we
can look into related approaches (and we've already discussed using
LTO).
Renames `PendingBlock::AddInst` to `PendingBlock::Add` because
`MakeElementAccessInst` expects the matching name to exist.
This creates a new check/type.h for most logic, and also moves some
functions to TypeStore in sem_ir/type.h. My approach for TypeStore is to
focus on moving the read-only functions there.
context.cpp is getting large, so I'm looking at a few ways to cut out
clusters of functions. This felt like a logical cluster of functions to
move to their own file.
Note I have two commits in this PR: one moving the functionality to a
new file, and one specifically changing TypeCompleter to use out-of-line
function implementations. This is to assist reviewability.
For an expression such as `(Type as Interface).AssocFn()`, track the
`Self` type `Type` in the result of the member access so that it's
available when checking the function call.
This introduces a new kind of type, `ImplFunctionType`, that represents
the type of a function that is expected within an impl, modeled as the
type of the function within the interface plus a value to use as `Self`.
Calls to values of this type behave like calls to the underlying
function except that the `Self` parameter is pre-bound to the self type
from the facet.
In order to support this, fix an issue where the imported list of
generic bindings lost their association with their enclosing generic.
This adds a little complexity to `import_ref`, including a new recursive
cycle that I intend to address in a follow-up PR.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Benefits:
* Provide a proper API for accessing lookup information.
* Make assumptions on whether the result is poisoned or not and how we
can use `InstId` explicit.
* Allow safely reusing the `InstId` value for pointing to the poisoning
entity for poisoned results (in a future PR).
* Consolidate `LookupNameInExactScopeResult`, `std::pair<SemIR::InstId,
bool>` and part of `LookupResult`.
Part of #4622.
Add a full entity representation for associated constants, and build a
`Generic` object for them. This `Generic` is parameterized by the
enclosing `Self` type, allowing the use of `Self` within the type of the
associated constant to be supported.
When performing impl lookup for an associated constant, produce the type
with the provided self type substituted for its `Self` along with any
generic parameters of the interface.
Split the handling of associated constant declarations into two parts,
corresponding to the code before the `=`, and the code between the `=`
and `;` (if any). The former goes into the generic declaration region;
the latter into the generic definition region. This prepares us to
handle the default value for an associated constant, but for now we're
just storing the information and not actually using it.
Remove the entity type field from `assoc_entity_type`, because it's
almost unused and is an attractive nuisance -- it must necessarily be a
type in the generic scope of the associated constant rather than in the
scope of the instruction (because there is no `Self` anywhere else),
which means that it's hard to substitute into or derive meaning from.
See `toolchain/check/testdata/impl/assoc_const_self.carbon` for tests of
the new functionality; these used to cause the toolchain to crash.
This is a followup from #4834, I searched for "invalid" uses in our
codebase. This is mostly changing comments, and a couple debug
functions, but shouldn't affect testable behavior.
Note a couple things I'll highlight as not changing (but could) are:
- `ReturnTypeInfo::is_valid`
- `"invalid"` uses in the formatter
- `AddInvalid` for `!has_value` in `inst_fingerprinter` (because the
cases it's called sound invalid-ish)
High level, replacing `Id::Invalid` with `Id::None` and `Id::is_valid`
with `Id::has_value` for clarity, as discussed
[here](https://discord.com/channels/655572317891461132/655578254970716160/1331664574545395794).
The `IntId` refactoring is needed together with `AnyIdBase` because it's
also used with `ValueStore`.
Note, trying to be careful not to rewrite `EnumBase::InvalidIndex`, or
`is_valid` in general (e.g., `IdKind::is_valid`).
I've tried to sequence commits here:
1. Automatic replacements:
- `((?:Id|Index)(?: |::|\(|Base(?:\(|::)))Invalid((?:Index)?\W)` ->
`$1None$2`
- `<invalid>` -> `<none>`
- `InvalidNodeId` -> `NoneNodeId`
- `/\*invalid\*/` -> `/*none*/`
- `id((?:_|\(\))(?:\.|->))is_valid` -> `id$1has_value`
2. Manual edits:
- In `int.h` and `int_test.cpp`
- `IntT` has `is_value`, which I'm renaming to `is_embedded_value`.
- Manual edits to comments in this file.
- `AnyIdBase` and `IdBase`
- Declaration of `is_valid` -> `has_value`, `InvalidIndex` ->
`NoneIndex`.
- In `ids.h` and `ids.cpp`
- `is_valid` -> `has_value`
- `// An explicitly invalid ID.` -> `// An ID with no value.`; similar
for index
- Various math on `InvalidIndex` -> `NoneIndex`
- Various mentions of "valid" in comments
- In `value_store.h`, for `IdT::Invalid`, plus one comment
- In `impl.h` and `tokenized_buffer.h`, we had different initialization
of `::None` values (versus `ids.h` syntax) that I fixed manually.
- Spot checks to compile
- Particularly where `is_valid` replacements didn't catch spots due to
different naming.
3. Autoupdate tests
4. verbose.carbon (NOAUTOUPDATE)
5. Comment spot checks
Note there are probably other mentions of "Invalid" that should be swept
up, but I'd like to argue for merging and separating out remaining
cleanup since this is so sweeping (and likely to hit merge conflicts
from churn). We'll probably have lingering mentions of "invalid" for a
bit regardless, just because there are uses of "invalid" in non-Id APIs.
The InstId in this field is to an instruction that declares the
function, rather than the function itself, so that diagnostics can print
where the function is coming from. The type of the function (the
FunctionType instruction) is the type (the type_id) of the
function_decl_id. So we rename the field to help make this distinction
more clear.
Followup to #4739
Change the implementation to use an explicit `is_poisoned` bit instead
of `InstId::PoisonedName` value.
Zero behavior change.
This would allow to more easily change the API to support accessing the
poisoning declaration so we can have better name poisoning diagnosis.
#4622
* Change `InterfaceWitness` -> `ImplWitness`
* Include a `SpecificId` in the `ImplWitness`. This allows the
`InstBlock` it contains to have its own identity, allowing it to be
changed as the impl is processed. Evaluation only updates the specific.
* Create the `ImplWitness` at the start of the impl definition. In the
future, this will be populated with the values of non-function
associated constants. For now, it starts full of invalid instruction
ids.
* Implements the model suggested in #4672 .
Note that the non-SemIR testdata changes are to these file:
* `toolchain/check/testdata/impl/lookup/fail_todo_undefined_impl.carbon`
* `toolchain/check/testdata/struct/import.carbon`
* `toolchain/check/testdata/tuple/import.carbon`
The last two are due to an import of generics bug exposed by this PR,
which will be fixed in a follow-on.
---------
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
When a generic requires a symbolic type to be complete, add a new
`require_complete_type` instruction to the generic eval block. During
monomorphization of such an instruction, require that type to be
complete.
`ids.h` and `ids.cpp` are the manual edits, everything else is
search-and-replace.
The full list of things moved is:
- `TypeId::TypeType`
- `TypeId::AutoType`
- `TypeId::Error`
- `ConstantId::Error`
This is to unblock removing `InstId::Builtin*`.
Represent the type as an `InstId` rather than as a `TypeId` to preserve
how it was written and better support tracking its value in a generic.
Add accessors to `Class` to get the base and adapted type to reduce code
duplication, and add `TypeStore::GetObjectRepr` to make it easier to map
from a type to its possibly-adapted object representation type. In
passing, also move `GetIntTypeInfo` and `GetUnqualifiedType` into
`TypeStore`.
This fixes specifics of generic adapters to properly look at the
specific adapted type, and also fixes importing of adapters.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Adds `FacetAccessWitness` instruction and uses it in `member_access.cpp`
to support accessing members of facets. Still to do: interface witness
access is producing runtime values when it should produce symbolic
values.
---------
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
This is for more clearly distinct names, and to make it a clearer
transition from `BuiltinInst` for name conflicts. `FloatType` is also an
instruction, and we have `Carbon::Error` (common/error.h). This avoids
affecting tests, although the name is embedded in the builtin test.
In `LegacyFloatType`, `Legacy` because I was having trouble coming up
with a more appropriate name. I'm not clear this is a `FloatLiteralType`
at present, it needs some work to mirror `IntLiteralType`.
In `ErrorInst`, the suffix `Inst` was discussed as good and similar to
`BuiltinInst` (although I'm trying to get rid of that).
When an `IntLiteral` appears as an operand of an `if` expression,
convert it to `i32` for now, so that we don't reject things like `if
cond then 1 else 2` due to having a non-constant value of type
`IntLiteral`.
For tuple indexing expressions such as `(a, b).0`, convert the index to
type `IntLiteral`, not to type `i32`. This isn't strictly necessary to
do in this PR, but avoids the need to provide an `IntLiteral` -> `i32`
implicit conversion for `no_prelude` tests using this syntax.
* The `extended_scopes` in a `NameScope` were represented by a
`NameScopeId`. Replace that with an `InstId` of an instruction returning
the type that is extending this name scope.
* `Context::LookupQualifiedName` now can take multiple scopes to look
in.
* `GetAsLookupScope` was moved out of `member_access.cpp` and is now
`Context::AppendLookupScopesForConstant`
This PR also fixes some existing issues that were revealed as part of
writing and testing this PR:
* Additional validation and handling of invalid ids.
* `extend impl` in a class is not properly imported yet, but at least
now it doesn't crash.
The change to use an `InstId` also allowed some diagnostics and
formatting to be improved.
---------
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
The first change here is to canonicalize away bit width when tracking
integers in our shared value store. This lets us have a more definitive
model of "what is the mathematical value". It also frees us to use more
efficient bit widths when available, such as bits inside the ID itself.
For canonicalizing, we try to minimize the width adjustments and
maximize the use of the SSO in APInt, and so we never shrink belowe
64-bits and grow in multiples of the word bit width in the
implementation. We also canonicalize to the signed 2s compliment
representation so we can represent negative numbers in an intuitive way.
The canonicalizing requires getting the bit width out of the type and
adjusting to it within the toolchain when doing any kind of math, and
this PR updates various places to do that, as well as adding some
convenience APIs to assist.
Then we take advantage of the canonical form and embed small integers
into the ID itself rather than allocating storage for them and
referencing them with an index. This is especially helpful for the
pervasive small integers such as the sizes of types, arrays, etc. Those
no longer require indirection at all. Various short-cut APIs to take
advantage of this have also been added.
This PR improves lexing by about 5% when there are lots of `i32` types.
---------
Co-authored-by: Dana Jansens <danakj@orodu.net>
Co-authored-by: Carbon Infra Bot <carbon-external-infra@google.com>
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
While here, also change the diagnostic emission to pass the interface
type rather than the interface name. This prepares us to include the
arguments in the diagnostic.
Instead, wait until we know whether it is used as a value or reference
expression. This allows us to avoid materializing a temporary if it is
used as a value and the initializing representation holds a copy of a
value representation.
This does a few things:
* Replaces the single `TypeId` in the `FacetTypeInfo` struct with a
vector of `InterfaceId`, `SpecificId` pairs (sorted in id order)
representing the set of interface requirements of the facet type. This
will later be used to support facet types with multiple interface
requirements (as in `I & J` or `I where .Self impls J`).
* Replace `InterfaceType` instructions (used as the type of an
`InterfaceDecl` instruction) with `FacetType` instructions (introduced
in #4460) with a (newly introduced) `FacetTypeFromInterface()` function.
* Replace code that consumed `InterfaceType` values with code that
consumed `FaceType` values. I've generally left the assumption in the
code that it is dealing with a single interface, using the (newly
introduced) `FacetTypeInfo::TryAsSingleInterface`, and producing an
error otherwise. There isn't yet support for the `&` operator or `where
.Self impls`, so this is generally a good assumption for now, except you
can get a facet type with no associated interfaces from a `type
where`... expression. In some cases, the facet type value is pulled from
the evaluation of an `InterfaceDecl` instruction, where the single
interface assumption will hold permanently.
* Some related cleans up: nicer stringification and formatting of facet
types, suppression of some errors when there already was an error.
There is still a lot left to do, including:
* Type `type` should be a facet type with a reserved id, replacing the
built-in instruction.
* Code using `TryAsSingleInterface` should generally be upgraded to
handle more than (or less than) one interface. Name lookup should be
particularly exciting.
* Operator `&` should be defined on facet types, unioning their
interface and other requirements.
* Requirements from a `where` clause don't do anything yet.
* Impls and impl lookup need to resolve facet types, and do things like
determine if all the associated constants are given values.
---------
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
Co-authored-by: Geoff Romer <gromer@google.com>
This converts `StructTypeField` from an instruction to a dedicated type,
with its own store. This had originated from discussing how
`.GetAs<SemIR::StructTypeField>` was more prevalent than for other
instructions, but is probably more interesting for the storage savings
(16 bytes StructTypeField + 4 byte LocId + 4 byte InstId -> 8 byte
StructTypeField).
Due to the different structure, these now have their own stack during
construction, reducing (but not eliminating) `args_type_info_stack_`
use-cases.
The test changes of different InstIds is expected because structs and
classes generate fewer instructions now. Other than that, results should
remain the same.
I'm generally trying to avoid unrelated cleanup here due to the PR size,
though I did scrutinize the `VerifyOnFinish` calls, adding one and
commenting others (putting them in member order because that's how I was
checking what was verified and what wasn't).
When an instruction is created as part of an implicit call to an
interface member, we generated a bunch of constants for naming the
interface, finding the corresponding specific, accessing its member
function, and so on. This led to significant bloat in SemIR.
Instead, we now track whether an instruction is created implicitly in
its location, and where relevant, we use the constant value of the
instruction directly instead of storing a new `Inst`.
This doesn't reduce the amount of work we need to do, but does make the
representation in SemIR smaller and more readable.
This instruction represents integer values, whether they come from
literals or calculations, so it the old name is inaccurate. I also plan
to rename `BigInt` to `IntLiteral` based on recent discussion and this
change aims to avoid confusion stemming from the same name being used
for two different things.
I'm not renaming `FloatLiteral` because recent discussion suggests we
may want distinct `FloatLiteral` versus `FloatValue` representations in
SemIR.
- Generate runtime indices as part of pattern matching, rather than as a
separate postprocessing/rewriting step.
- In contexts where runtime parameters aren't permitted, avoid emitting
insts for them to begin with, rather than trying to detect the problem
and rewrite the IR to remove them later on.
Also propagate the pattern IR along with the pattern-match IR, and use
it where appropriate.
Strictly speaking, some parts of the pattern-match IR are allocated
eagerly, while traversing the pattern's parse tree, but they still
aren't actually emitted until we traverse the associated pattern insts.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Richard Smith
David Blaikie
Jon Ross-Perkins
Boaz Brickner
