Lexer diagnostics used a single `const char*` as their source location,
which only allowed pointing at a single character rather than a run of
characters. This limited the underlining of unrecognized tokens, and
also made escape sequence diagnostics particularly strange by stopping
at whatever point the lexer discovered the error and pointing only at
that location. For example: `"\w"` was reported at the `w`, and `"\x"`
at the closing `"`.
This change tries to always keep the primary location of a diagnostic
the point at which typing (inserting or deleting) might fix the error.
So for `"\x"`, `\x` is underlined, but the position is at the `"` as
that's where you would type a hex code.
The lexer's emitter now takes a special lexing source location that
represents either a single position _between_ two characters, a single
character, or a range of the source buffer. The lexer diagnostics are
updated to construct these for the character range as appropriate.
Parser diagnostics for a missing token were located at the _next_ token,
which is particularly confusing for terminators like missing `;`s. Now
they are located at a position after the previous token, with or without
a space depending on the token, but typically on the same line.
Diagnostics still sort by how far the parser has read.
The parser diagnostics for unclosed groups also now attaches a label to
the opening token when it is on a separate line. And the diagnostics for
mismatched indent in a multi-line string attaches a label to the closing
`'''` that establishes that indent.
There are likely more location improvements we should do here, but this
seemed like a reasonable incremental improvement and is what Claude
found when doing an initial audit. One example where I think we should
make further improvements is around suggesting raw identifiers when we
find an unexpected `Cpp` or `Core` or `base`. We do this consistently
now, but raw identifiers should be rare. A TODO is added for these
cases.
Assisted-by: Claude Code
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
There were a number of iterations on the design that weren't reflected
in the initial port to the terminal rendering library. This PR tries to
complete the rendering side of things to match the design we landed on:
code-focused, with messages attached by lines to the code, and condensed
as much as possible to avoid the vertical space.
It also improves the styling to make things more visually
distinguishable such as adding a `->` to the main error line, and making
the underlines and connectors for it have a heavy weight (when the font
supports that).
Another major change is having multiple messages on a single line be
drawn in source lexical order. This requires the connectors to cross
without joining, but makes it easier to read the messages.
This PR also has some refactorings to enable these improvements, and a
_number_ of improvements to comment prose and terminology to try and
avoid jargon and make things read more naturally. Sorry for the fact
that Claude left a bunch of this mannerly language in comments despite
my efforts, but I'm continuing to try and drive the prose towards
something direct and simple to read. Some of the terminology
improvements also needed to be made in the design doc and those have
been made here.
Note that I don't think this rendering is perfect or should be viewed as
final. I'm happy to iterate on it further, and have a few adjustments in
mind already, but would like to focus this on getting the
_implementation_ of the current rendering design in place, and then we
can make targeted changes or tweaks as needed. For example, I'm not yet
fully happy with the rendering when messages are too long and we move
them all the way to the left, but am leaving that for a follow-up.
Assisted-by: Claude Code
Diagnostic rendering was part of the data model: `Loc::FormatLocation`
and
`Loc::FormatSnippet` wrote plain text to a stream, so no capability,
color, or
terminal width could reach them.
A diagnostic is now one message with labels, contexts, and location
information
attached, and `Diagnostics::Renderer` draws it into a
`Terminal::Buffer`. The
design is in `toolchain/docs/diagnostics_rendering.md` (#7668),
authoring in
`toolchain/docs/diagnostics.md`.
Before:
```
example.carbon:6:3: error: 1 argument passed to function expecting 0 arguments
Run0(1);
^~~~~~~
example.carbon:3:1: note: calling function declared here
fn Run0() {}
^~~~~~~~~~~
```
After:
```
error: 1 argument passed to function expecting 0 arguments
╭─┤ example.carbon:6:3
┆
3 │ fn Run0() {}
· ─────┬─────
· ╰──┤ calling function declared here
┆
-> 6 │ Run0(1);
· ───────
╰────────────
```
`--no-diagnostic-snippets` gives a compact form, `example.carbon:6:3-9`.
File
tests use it; the rendering tests under `toolchain/diagnostics/testdata`
ask for
snippets.
C++ interop diagnostics are data now rather than text Clang drew:
`SemIR::ClangSourceLocId` names a `clang::SourceRange`, and a Clang
location is
marked as the point it names.
`StreamConsumer` moves to a `:renderer` target that `:emitter` does not
depend
on, keeping `common/terminal` out of `consumer.h`. Capabilities come
from the
file behind the error stream, so tests get plain ASCII.
`renderer_fuzzer` draws diagnostics built from fuzzer bytes with every
capability combination, since a shape the renderer doesn't expect must
never be
why the compiler dies while reporting a problem.
TODOs mark the follow-ups: line weights and crossing lines, wrapping
that keeps
a quoted type whole, and ordering diagnostics that share a byte offset.
Also: `IncorrectExtension`'s hint moves into its message, since its note
had no
location of its own, and `strip_noise` in `check_diagnostics.py` blanks
multi-line `#define`s instead of deleting them.
Assisted-by: Claude Code
The type `type` is now a `FacetType` inst with no constraints. This
brings the model implemented in the toolchain into better alignment with
the language design. The `SemIR::TypeType` struct remains as a scope for
holding the `TypeInstId`, `ConstantId`, and `TypeId` constants, but is
not an `InstKind` anymore.
The `TypeType` inst looks a lot like singletons, but there are many
`FacetType` insts so it doesn't quite fit that model. So we put it
alongside singletons with a fixed inst id but refer to it as a more
general "builtin" inst that is not a singleton.
`Namespace::PackageInstId` is similar, and we group it with `TypeType`
conceptually as another builtin instruction with a fixed id.
No conversion is needed anymore to use a `type` as a facet, since types
also have a `FacetType` type. This simplifies and removes a number of
helpers and branches throughout the code.
The `TypeType` inst is now part of the constant store, so we end up
printing it in the constants block in every test. But it's also named
`type` rather than `%type` to preserve the majority of existing
formatting behaviour, though this does look different from other
constants.
Assisted-by: Opus 5 was used to generate a first draft and validate the
refactoring. Though nearly everything non-trivial the tool wrote has
been modified or rewritten.
This adds SemIR structs and implements building `observe` lists, as well
as naming, formatting, and importing `observe` declarations.
---------
Co-authored-by: Dana Jansens <danakj@orodu.net>
This shifts logic a little so that empty top-level scopes are printed
less often. This affects imports mainly for now, but should be expected
to affect the soon-to-be-added generated scope more significantly.
Assisted-by: Google Antigravity with Gemini 3 Flash
This drops file_test runtime from about 3s to 2.5s on my machine, which
is now ~30% faster than before #5653 slowed things down by adding a lot
of stuff to the production prelude.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
People seemed receptive [on
#toolchain](https://discord.com/channels/655572317891461132/655578254970716160/1379196447827689553),
so proceeding.
For the two name conflicts, I've set it up so that there's a
"foo.carbon" and "foo_with_prelude.carbon", to indicate that the
no-prelude approach is preferred (with a shorter name).
Note min_prelude will require a little more work/thought, I want to
avoid adding `--custom-core` etc.