We don't need it any more, and removing it simplifies a few things:
- One fewer predefined `File` and reserved ID.
- We now have simply `Builtin` instructions for builtins, instead of
having an `ImportRef` that indirectly references a `Builtin`.
- `ConstantId`s now always refer directly to a local constant, instead
of sometimes referring to an `ImportRef` for a constant in the builtins
IR.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
First steps towards using constant values in lowering.
For now, we reuse the regular instruction lowering to lower constants.
This mostly works, because we don't actually need an `llvm::Function` or
a current basic block when lowering a constant most of the time.
However, a special case is needed for lowering aggregate value constants
because they would otherwise create a stack alloca to store the
constant. Separate constant lowering code will be added in a future
change to clean this up.
When lowering a constant initializing expression, the result is a value
of the destination type, rather than code to initialize the destination,
so a separate copy step is required when finishing initialization from a
constant for a type that uses in-place initialization. Handling this
required extending `ReturnExpr` to track its destination location.
We currently often create non-constant `*_access` SemIR instructions
that are only used by constant `*_init` instructions. These cause
lowering to leave behind `getelementptr` instructions in the lowered IR
that are now unused. It should be possible to detect this case and avoid
producing these instructions, or to produce them lazily, but for now
we're just leaving them around for LLVM to clean up.
Use a level comparison during substitution to determine whether we're
substituting a particular binding. Evaluate symbolic bindings with the
same name and the same level to the same symbolic constant, for example
across redeclarations of a generic function.
In handle_class and handle_interface we assign TypeType, so is more
consistent. I think this had been missed because we haven't really been
using these declarations (historically, declarations didn't have a
type). It seems not to significantly affect output at present, although
I found this while trying to change merge behavior.
This doesn't actually track whether a declaration is `extern`. It does,
however:
- Factor out and expand merge support for classes, sharing handling with
functions.
- This makes the ClassRedefinition diagnostic redundant, as the
redeclaration checking overlaps.
- Add partial `extern` handling to class handling; just some
verifications of correct use.
- Factor out `extern` on member handling for sharing with `fn`.
- Fixes a bug in import_ref where a class's definition_id wasn't
assigned when defining.
This changes how a redefinition is handled (replaced, rather than
merged). I don't know whether that's ideal, but I think it results in
easy-to-understand consequences, and it's more consistent with how `fn`
works.
There's enough work here that this felt like a decent cut point,
particularly as the amount of work to actually add `extern` tracking
will be significant.
Factor out `SemIR::InstNamer` and also use it when lowering to LLVM IR.
Automatically name all instructions created with our `IRBuilder` based
on the name computed by the `InstNamer`, and likewise name basic blocks
using the label generated by the `InstNamer`.
Move some of the existing naming logic out from lower into `InstNamer`
so that it's also used in SemIR. In particular, we now name call
instructions after their callee, or after the builtin name for calls to
builtins.
Computing and adding these names isn't completely free. This instruction
naming is designed to be optional, so that we can turn it off for builds
where the LLVM IR will only be converted to assembly and won't be seen
by a human, but so far it's enabled unconditionally. We can tune that
later as needed.
Allow an explicit `as` conversion to convert between adapters and their
adapted types. Also make the value representation of an adapter be the
same as the value representation of the adapted type so that the
conversion is always possible.
---------
Co-authored-by: josh11b <15258583+josh11b@users.noreply.github.com>
Use the complete location of the `as` conversion rather than the
location of the first operand, so diagnostics referring to the result
point at the whole thing.
Note the "Cannot implicitly convert from `C*` to `C*`." error is what I
would aim to fix next. This is what had spawned the discussion of
whether to use name scopes to merge difficult-to-relate names. But I
think that's going to take more substantially more work, so the small
improvement for now.
Move completeness check to the point where the function is defined or
first called. This means we also defer deciding whether the function has
a return slot until that point. Instead of storing a return slot per
function, store the location of the return storage, which may or may not
be used, and compute and store a separate flag saying whether to use it
at the point of first use or definition.
This is the final piece in supporting simple `Make` functions in classes
as a replacement for constructors.
- Adds an empty prelude.carbon file
- Imports that file in any non-Core package file
- Adds --disable-prelude-import to avoid that
- Adds --exclude-dump-file-prefix to be able to hide files from dumping
- Used to hide core files (we can't do this by package name due to lex
dumps, for example)
- Restructures some tests to not rely on `i32`, particularly `alias`
tests (which rely on a name ref) and tests with no prelude.
I'm adding the framework for switching i32 to calling Int32 in the
prelude, but I'm running into a separate error actually switching over.
So that *mostly* works, but isn't quite ready for prime time. However,
maybe the current state of this PR is still useful to review since it
does a lot of the infrastructure work and adds the %Core everywhere?
Adds ImportIRId::ApiForImpl to reserve a specific slot for the `api`
import, so that the code can trivially determine whether an import is
from the same library. This is then used for merging function
declarations, because the rules for redeclarations in the same library
slightly differ as compared to other imports (note they're also not
identical to same-file rules).
The main thing this leaves from the recent #3762 is verifying that
entities forward declared in the `impl` file are also defined, but
that's not in-scope for merging; it's moreso post-checking validation.
Note, a lot of our `invalid <entity> ID` comments in ids.h were
incorrectly copy-pasted, so I've cut `<entity>`.
Instead of attempting to reconstruct this based on the properties of the
target scope of the declaration name, check whether the enclosing scope
of the inner deferred definition scope is the enclosing deferred
definition scope.
Also add verbose logging to the deferred definition handling code to
make it easier to see when we switch between handling the regular parse
nodes and the deferred function bodies.
LookupNameInDecl is only called from DeclNameStack, but I'm adding
mark_imports_used there because it feels more consistent. Not sure if we
want a better API boundary. I admit I'm also suspicious of its call to
LookupInCurrentScope but maybe it's okay due to how imports work.
I was choosing to print multiple diagnostics when a declaration is
previously used _and_ doesn't match because I think the "previously
used" is more important, but the "doesn't match" may give an additional
hint about why it didn't work.
The merge.h utility function is because I think we can follow a similar
model for identifying errors with other declarations: classes,
interfaces, etc.
This doesn't significantly change logic, although I'm trying to add the
location to used state.
The issue I'm trying to address is how to identify a declaration as
"allowed to be redeclared". Consider:
```
library "a" api;
extern fn F();
```
```
library "b" api;
extern fn F();
```
```
library "c" api;
import library "a";
import library "b";
var x: auto = F();
fn F();
```
What currently happens is:
1. On import of "a", `F` becomes ImportRefUnused
2. On import of "b", `F` becomes ImportRefUsed in order to merge.
3. In "c", the call `F()` doesn't change the state.
4. In "c", the declaration `fn F();` needs some breadcrumb to understand
whether "F" has been referenced, as in step (3) here.
What I want to happen is:
1. On import of "a", `F` becomes ImportRefUnloaded
2. On import of "b", `F` becomes ImportRefLoaded in order to merge.
3. In "c", the call `F()` causes `F` to become ImportRefUsed
4. In "c", the declaration `fn F();` detects that `F` is already
ImportRefUsed, and can use the associated `used_id` for a diagnostic
about why redeclaring is invalid.
Note this PR isn't implementing (4). I'm focused on the refactoring to
add a new ImportRef state here.
Just connecting this together. Note the diagnostics still need to be
cleaned up/improved, although this is correctly handling some cases.
This exposed an incorrect parameter passed in DiagnosticEmitter, which
is fixed here -- context_fn shouldn't include args. Note this was caught
by the CHECK, I'm just expanding on the message since I used the detail
to help figure out the bug.
In parse, form a list of methods that are defined inline, tracking where
they start, where they end, and which other inline methods are nested
within them.
In check, when we reach an inline method body, skip it and add it to a
worklist to be processed later. We also track when we reach the start
and end of a context in which inline method bodies are deferred, so that
we know when to replay the bodies.
When suspending a function definition to be processed later, the
`DeclNameStack` entry is moved to separate storage, including popping
the corresponding scopes from the scope stack and removing the
corresponding lexical names from lexical lookup. Later, when we return
to the function and parse its definition, the `DeclNameStack` entry is
restored. The same is done when we reach the end of a nested context
that can have inline methods, so that we can reenter the nested scope
before processing its members.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
This replaces all invalid node IDs in import_ref.cpp with references to
the imported instruction.
This splits out ReplaceInstBeforeConstantUse into a separate function
when the LocationId is replaced, as for splicing. That's the less common
case, whereas others would need to provide the LocationId in order just
to not change the value.
As discussed around #3792, identify the import a diagnostic message came
from prior to the diagnostic message itself. This occurs during location
translation so that the logic can be central.
I'd considered associating the parse node with ImportRef instructions,
but I realized about halfway through that because I need to store the
ImportDirectiveId on the ImportIR for cross-package imports, it's there
for use in location translation without extra work. That saves a fair
amount of stringing it through declarations, as well as an oddity where
ImportRef instructions would have a node that didn't really represent
them.
The purpose of the newline is to make it clearer where a given
diagnostic begins and ends, particularly as the first message of a
diagnostic may not be the error.
This is a trivial code change, but ripples edits through test files.
For now, a builtin function is defined by specifying a string literal
initializer in a function declaration:
```carbon
fn MyBuiltin(a: i32) -> i32 = "builtin.name";
```
End-to-end support is included for a sample `"int.add"` builtin
performing integer addition, covering constant evaluation and code
generation.
The implementation here needs substantial refactoring before we'll be
ready to start adding more builtins. That refactoring work will be
coming next. This change is aiming to checkpoint some incremental
progress.
Fix a collection of issues that were preventing lowering for overloaded
operators from working.
Instead of creating `import_ref` instructions during name lookup in the
current block, whatever that might be, we now create them in the `file`
block always. This avoids inserting them into blocks that might not be
intended to contain them, such as functions, and avoids the IR generated
for a function depending on which names we happen to have looked up
first.
When importing a class, function, or interface, import its enclosing
scope ID. This is necessary to allow us to distinguish between functions
at interface scope, which shouldn't be lowered, and other functions, and
will also be used in future to provide qualified names for declarations
when printing types. In order to support this:
- Track the constant values of namespaces created during importing so
that we can find them when resolving an import ref. Use those constant
values to convert an enclosing scope ID from the imported IR into a
corresponding ID in the current IR.
- Change how we do two-pass import of classes and namespaces so that we
can do two-pass import even for non-defining declarations, so that we
can import the enclosing scope.
While working on the final point above, I reworked `TryResolveInst` to
return a flag indicating whether another pass is necessary instead of
implicitly encoding this in the `ConstantId`. This permits the handling
of classes to be simplified; now `import_ir_constant_values` is only
accessed in a single place.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
This change implements the check behavior for the arrow operator.
`ptr->Foo()` is rewritten as `(*ptr).Foo()` and `ptr->(X.y)` is
rewritten as `(*ptr).(X.y)`
On the parsing side, we treat `a.(b)` as a member access whose second
operand is a `ParenExpr` rather than a `MemberName`. A new node category
is added for the union of `MemberName` and `ParenExpr` to support this.
Checking is mostly reusing the same pieces we already have for simple
member access. Compound member access is in most ways a simplified form
of simple member access because it doesn't need to do any lookup.
Note, I'm annotating the lookup partly so that the reason the conflict
comes up is clear, partly so that there's actually a diagnostic line
associated with the root cause as more tests get packed into a single
file.
When a member access names an interface member, perform impl lookup to
find the impl and its corresponding member.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
A couple of minor functional changes here:
- We now always create a `name_ref` for the name referred to by the
right-hand operand of member access. Previously we skipped creating this
instruction if the referenced name was a field, and just created the
field access instruction. This makes our processing of member accesses
and our SemIR representation a bit more uniform.
- We now perform lookup into the type of the left-hand operand if it's
any type with a scope, not just for classes. This means we do lookup
into interface types. However, doing so isn't really useful yet because
it always finds an associated entity that isn't usable by itself. This
changes the diagnostic in
`toolchain/check/testdata/interface/fail_todo_facet_lookup.carbon`.
This handles toolchain failures per-file. The intent is to allow placing
both "success" and "fail" tests in the same file, using splits. However,
this PR only adds support and updates existing tests to continue
passing.
This doesn't add full support. I'm separating it out to make the effects
of the modifier changes clearer for review. I'm restructuring a little
with the expectation that we'll have some more categories of modifier
keywords in the future (similar to `extern`, these may not be in a "set"
such as access), and thus easily scaling up to a few more would be
useful.
This detects more cases of incorrect matches between declaration and
definition. It also factors the logic out to a separate file for easier
sharing, particularly when it comes to merging imports (I'm not sure if
this exact API will be reshared, but the core logic should apply).
Rather than just adding `Self` to the lexical scope, add it to the
class's name scope so that it is visible in later lexical scopes for the
same class -- in particular, for out-of-line definitions of members.
Also switch some tests in `check/testdata/class` over to making
idiomatic use of `Self` both inside a class and out-of-line, now that it
works more consistently.
Note that this does not permit using `Class.Self`, but only because we
don't yet support keyword names after `.` at all. If that changed, one
could use `Class.Self` to redundantly refer to `Class`. Whether we allow
that is left to a future decision.
Previously we used the default inst block formatting, which writes out a
parenthesized list of references, which would always be 'unexpected
instref's because nothing else prints the instructions in the decl
block.
In addition, track the decl block for function declarations like we do
for other kinds of declaration. This means that the parameter
declarations for a function are now properly rendered into the formatted
IR. Note that this adds a lot of verbosity to `function_decl`, but it
does accurately reflect the IR, and we'll probably want this information
to be printed once we start supporting more complex generic function
declarations.
This removes almost all the 'unexpected instref's in our formatted
output. There are remaining cases when a declarative scope contains
multiple blocks, where we only track one of those blocks. That happens
when there is control flow within declarative scopes, and for error
recovery when a class or interface or similar is defined more than once.
As requested in #3730.
By adding a constant to ClassDecl/InterfaceDecl, we're able to remove
name reference special-casing. Use TryEvalInst on the Decl to generate
the Type. For ClassDecl, then use the generated constant for
self_type_id.
I believe this PR is sufficient to pull in all current class features,
including the current bits of inheritance which have been implemented.
Because a class declaration can reference its own type, this creates an
incomplete type prior to constant loading.
Right now, the object representation is imported proactively, but
individual fields are left as ImportRefUnused. This means that member
functions and similar will only be imported if called.
This also adjusts how function parameters are being handled, to match
the expectations of Self param structure.
When formatting, I'm starting to look into constants. Otherwise we get
"unexpected instref".
Overall, there are a few things that may be worth further discussion:
- The lack of a constant corresponding to the ClassType on ClassDecl is
inconvenient -- I'd like to see how zygoloid feels about trying to
restructure this. i.e., I'm setting a constant in order to be able to
track things down later, it'd be nice if the normal IR did this simply
for consistency, or if we were able to combine these rather than having
separate instructions.
- Should we shift the parse node tracking further, and go with a setup
wherein imports can embed import references into that? e.g., negative
values go to another array which includes a ImportIRId for printing
diagnostics, replacing the invalid NodeId.
- Can the formatter switch to a more general scan of instructions for
naming, to eliminate the ImportRef constant approach added here?
- GetExprValueForLookupResult special-casing instructions felt
surprising, I might see if there's a way to restructure to avoid that.
But I think these issues are things that can be separated out.
Adds `BindAlias` with a hybrid of `BindName` and `NameRef` semantics. I
think it's slightly closer to `BindName` because it introduces a name,
so I'm going more in that direction. This also matches the need for
`bind_name_id` with imports on enclosing scopes.
Note, only things that look like a name reference are being allowed on
the RHS of `alias`. This includes builtins that look like name
references, such as `bool`, but not ones that turn into values
underneath, such as `false`.
- File::StringifyTypeExpr now has a case that hits the ImportRefUsed
TODO, so implementing that. I think the `static` approach will be
helpful in ensuring there aren't access bugs, particularly when future
support is added.
- `let` wasn't adding to exports because it doesn't use
`decl_name_stack` the way `var` does. This now adds to exports, but we
might want to unify logic for issues such as this.
- BuildImportRefUsedValueRepr is now called for another inst kind, and
it seemed like calling back to BuildValueRepr was the best way to
resolve this. I don't *think* that's going to cause recursion.
`GlobalInit` block is now static block within a `SemIR` which will be
used to emit initialization instructions for variables in the `Package`
scope.
inst_block_stack now has additional methods to handle `GlobalInit` block
separately, this block can be popped without being finalized allowing to
accumulate between all instances of variables.
At the end of the `check` phase, if this block is not empty , the
function `__global_init` will be added with this block being inserted
into it.
This block is pushed to `inst_block_scope` at the end `BindName`,
allowing instruction to be emitted into it, then popped at the semicolon
(VariableDecl).
This significantly changes the `SemIR` output, that's why this commit
updates a lot of the test cases.
This provides support for Const, Pointer, Struct, and Tuple types. It
does not cover Class, Function, or Interface which have their own Id and
are tracked slightly differently.
Previously, we created scopes for implicit parameter lists and tuple
patterns, but that meant that bindings went out of scope too soon. We
now keep them in scope until the end of the enclosing declaration. This
is accomplished by pushing a scope for parameters when we handle a name
that might have them, and then popping the scope again if it turns out
that there were no parameters.
For a case such as:
```carbon
fn A(T:! type).B(U:! type).F(x: T, y: U) {
var z: T;
}
```
... we now have the following scopes in the stack:
- A parameter scope containing `T`.
- A class scope for `A(T:! type)`.
- A parameter scope containing `U`.
- A class scope for `A(T:! type).B(U:! type)`.
- A parameter scope containing `x: T` and `y: U`.
- A function body scope containing `z: T`.
The innermost scope when check processes a declaration of a function,
class, or similar is now often a parameter scope rather than the
enclosing scope in which the class or function is declared, so the
target scope is now passed explicitly into the modifier checking code
that wants to inspect that enclosing scope.
I'm basically just nudging down the path I think is right here. Adding a
small bit more support, but also more tests to capture cases that I
think will need to be verified as working.
With diagnostics like "Value of type `<function>` is not callable.",
that's because it expects a FunctionDecl but is instead finding a
ImportRefUsed. I'll need to work out the necessary support for a
callable function.
This is a bit of a cleanup; I probably should've just renamed CrossRef
instead of adding ImportRefUsed.
Adding `is_builtin` to InstId is more about providing a standard API for
the check, which I expect to add a little more of.
Shifts import tests to validate that the BuildValueRepr CHECK isn't
accidentally hit.
This makes some changes to the formatter so that ImportRefUnused and
ImportRefUsed will both be labeled as "import_ref" with an "unused ->
used" argument change in textual IR, but is otherwise not changing
logic.
Richard SmithandJon Ross-Perkins
CJ Johnson
Gıyaseddin Tanrıkulu